aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ramips: fix lenovo newifi-y1 switch and LED configChuanhong Guo2018-01-092-3/+5
| | | | | | | | | | | | | | There are 3 ethernet ports on Y1. LAN1 on port1, LAN2 on port0 and WAN on port4. Use a standalone switch configuration to match this and use the switch trigger so that LAN LED could indicate the connetction status for both lan ports correctly. This patch also drop the internet led configuration, because there is a WAN led for port4 and eth0.2 isn't always used as WAN. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: add missing soc compatibles to dtsMathias Kresin2018-01-092-2/+2
| | | | | | Add SoC compatibles where missing. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: firewrt: indicate boot status via LEDMathias Kresin2018-01-091-0/+1
| | | | | | | Add the Firefly FireWRT gree power LED to diag.sh to indicate the boot status via the power LED. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: remove obsolete '< KERNEL_VERSION(4, 4, 0)' checkGabor Juhos2018-01-091-5/+0
| | | | | | | | | Because the oldest supported kernel version on the ar71xx target is 4.4, the condition that the kernel version is smaller than 4.4.0 is always false. Remove the obsolete check from mach-rb4xx.c to clean up the code a bit. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: remove obsolete '< KERNEL_VERSION(4, 2, 0)' checkGabor Juhos2018-01-091-7/+0
| | | | | | | | | Because the oldest supported kernel version on the ar71xx target is 4.4, the condition that the kernel version is smaller than 4.2.0 is always false. Remove the obsolete check from ag71xx_main.c to clean up the code a bit. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: remove obsolete '< KERNEL_VERSION(3, 15, 0)' checksGabor Juhos2018-01-092-17/+0
| | | | | | | | | Because the oldest supported kernel version on the ar71xx target is 4.4, the condition that the kernel version is smaller than 3.15.0 is always false. Remove the obsolete checks from the target specific source files to clean up the code a bit. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* armvirt: bump to v4.14John Crispin2018-01-092-1/+253
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* malta: bump tp v4.14John Crispin2018-01-092-1/+310
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* malta: fix image prefix namesJohn Crispin2018-01-091-4/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx/mikrotik: disable TP-Link TL-WR810N v2 board supportGabor Juhos2018-01-091-0/+1
| | | | | | It does not belongs to the MikroTik boards. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx/mikrotik: disable unused MTD partitioning and split driversGabor Juhos2018-01-091-0/+6
| | | | | | Reduces the compressed kernel size by ~2.5KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx/mikrotik: disable unused ethernet switch and phy driversGabor Juhos2018-01-091-0/+4
| | | | | | | | | | | | | | | | | | | | Disable the drivers for the following ethernet switches: Realtek RTL8306 Realtek RTL8366/8367 Marvell 88E6060 (DSA) Marvell 88E6063 (DSA) Also disable the phy driver for Marvell PHYs. None of the supported RouterBOARDs are using any device which needs these drivers. Disable the DSA framework too, because it is not required by the remaining switch drivers. This reduces the compressed kernel size by ~20KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: fix Kconfig dependency of the 88E6063 switch DSA driverGabor Juhos2018-01-092-2/+4
| | | | | | | | | | | | The Marvell 88E6063 ethernet switch driver depends on the DSA framework. Add a 'depends on NET_DSA' statement to its Kconfig entry to state that explicitly. Fixes the following Kconfig warning: warning: (NET_DSA_MV88E6060 && NET_DSA_MV88E6063) selects NET_DSA_TAG_TRAILER which has unmet direct dependencies (NET && NET_DSA) Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: sort kernel configurationsGabor Juhos2018-01-094-6/+6
| | | | | | | The symbols in some kernel configurations of the target are in wrong order. Sort them with kconfig.pl. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* octeon: add support for kernel 4.14Stijn Tintel2018-01-085-0/+465
| | | | | | Tested on EdgeRouter Lite. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ar71xx: fix compiler warnings in mdio-bitbang.c for 4.4Gabor Juhos2018-01-072-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building Linux 4.4 for ar71xx throws the following warnings in drivers/net/phy/mdio-bitbang.c: CC drivers/net/phy/mdio-bitbang.o In file included from include/linux/irqflags.h:14:0, from drivers/net/phy/mdio-bitbang.c:20: drivers/net/phy/mdio-bitbang.c: In function 'mdiobb_read': include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:63:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:124:3: note: in expansion of macro 'raw_local_irq_save' raw_local_irq_save(flags); \ ^ drivers/net/phy/mdio-bitbang.c:162:2: note: in expansion of macro 'local_irq_save' local_irq_save(flags); ^ include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:68:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:126:39: note: in expansion of macro 'raw_local_irq_restore' #define local_irq_restore(flags) do { raw_local_irq_restore(flags); } while (0) ^ drivers/net/phy/mdio-bitbang.c:175:2: note: in expansion of macro 'local_irq_restore' local_irq_restore(flags); ^ drivers/net/phy/mdio-bitbang.c:159:11: warning: unused variable 'i' [-Wunused-variable] int ret, i; ^ In file included from include/linux/irqflags.h:14:0, from drivers/net/phy/mdio-bitbang.c:20: drivers/net/phy/mdio-bitbang.c: In function 'mdiobb_write': include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:63:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:124:3: note: in expansion of macro 'raw_local_irq_save' raw_local_irq_save(flags); \ ^ drivers/net/phy/mdio-bitbang.c:185:2: note: in expansion of macro 'local_irq_save' local_irq_save(flags); ^ include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:68:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:126:39: note: in expansion of macro 'raw_local_irq_restore' #define local_irq_restore(flags) do { raw_local_irq_restore(flags); } while (0) ^ drivers/net/phy/mdio-bitbang.c:200:2: note: in expansion of macro 'local_irq_restore' local_irq_restore(flags); ^ These are caused by the 900-mdio_bitbang_ignore_ta_value and 901-phy-mdio-bitbang-prevent-rescheduling-during-command patches. The first patch removes some code but it does not remove the variable which is used by the removed code only. The second patch adds local_irq_{save,restore} calls. The type of the argument of these calls must be 'unsigned long', but the patch defines the variable as 'long'. Fix both patches to silence the warnings. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* lantiq: fix wbmr-hp-g300h image metadataMathias Kresin2018-01-041-2/+2
| | | | | | | The Annex A and Annex B version are using the same (old) userspace boardname. Update the SUPPORTED_DEVICES to allow an update from lede-17.01. Signed-off-by: Mathias Kresin <dev@kresin.me>
* x86: preinit: use board_name on Sm Super ServersPhilip Prindeville2018-01-041-1/+8
| | | | | | | | | Supermicro puts "Super Server" into their product_name DMI value for a whole slew of products, making this value about as useful as not having been filled in at all. Instead, fall back on the board_name instead. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* x86: preinit: make name rewrite into reusable functionPhilip Prindeville2018-01-041-6/+10
| | | | | | | | There might be other places (such as vendor-supplied preinit scripts) where we wish to take a DMI name and clean it up in a consistent way, so make the sed command into a function. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: bump 4.14 to 4.14.11Stijn Tintel2018-01-0314-41/+42
| | | | | | | | | | | | | | | Rename unwinder config symbols to match upstream changes. Refresh patches. Update patch that no longer applies: 202-reduce_module_size.patch Also enable CONFIG_PAGE_TABLE_ISOLATION. This feature was backported from 4.15 to the 4.14 stable series. It is enabled by default, so enable it in OpenWrt as well. Compile-tested on x86/64. Runtime-tested on x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: move CONFIG_KASAN to generic configStijn Tintel2018-01-027-4/+3
| | | | | | | | | | While bumping 4.14, the kernel build failed due to missing CONFIG_KASAN symbol. Move it to generic config instead of defining it for all arm64 and x86/64 targets. It was only added in 4.0, so not needed in config-3.18. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* layerscape: activate fpu featureHauke Mehrtens2018-01-021-1/+1
| | | | | | | | The CPU sub type was set to a CPU version with FPU, but the FPU feature was not activated before, so a soft float toolchain was created. Activate also the FPU feature to create the correct toolchain. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91: sama5: activate fpuHauke Mehrtens2018-01-021-0/+2
| | | | | | | This activates neon and VFPv4 support for this target. The CPU support these feature so also use them. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.9 to 4.9.73Kevin Darbyshire-Bryant2018-01-0212-69/+80
| | | | | | | | Refresh patches. Runtime tested: ar71xx - Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* bcm53xx: use iflag=skip_bytes for dd command during sysupgradeRafał Miłecki2017-12-291-2/+2
| | | | | | | | | | | Since BusyBox 1.25.0 dd command supports iflag=skip_bytes which allows skipping requested amount of bytes without reducing blocksize. Thanks to this we can leave default blocksize and let dd work more efficiently. On Netgear R6250 "dd skip=58 iflag=skip_bytes" can be 5 times faster than "dd bs=58 skip=1" when extracting TRX out of CHK. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: image: build firmware for Asus WL-500g DeluxeRafał Miłecki2017-12-291-0/+8
| | | | | | | | It's a device based on BCM5365P (0x5365 package 0x00). This SoC has USB 1.1 controller but device has two USB 2.0 parts. They are handled by PCI-based controllers: 1106:3038 UHCI and 1106:3104 EHCI. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: add early support for kernel 4.14Rafał Miłecki2017-12-2920-0/+1702
| | | | | | Don't switch to it by default yet as it requires more testing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: fix Omega2 compatible stringMathias Kresin2017-12-293-1/+3
| | | | | | | Change the compatibel from Omega to Omega2 and add the compatible string where missing. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix widora neo diag ledMathias Kresin2017-12-291-2/+4
| | | | | | | The diag LED is named widora:orange:wifi and can't be derived from the boardname. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix dts compatible stringThomas Nixon2017-12-292-2/+2
| | | | | | | | | | This was broken in 7bab49fd ("lantiq: add compatible strings to dts files"), causing for the dm200 garbled serial output during boot, and likely other issues. Signed-off-by: Thomas Nixon <tom@tomn.co.uk> [fix the compat string of the P2601HNFX as well] Signed-off-by: Mathias Kresin <dev@kresin.me>
* bcm53xx: make USB packages compatible with kernels 4.13+Rafał Miłecki2017-12-291-2/+6
| | | | | | In kernels 4.13+ modules are located in an extra "broadcom" subdir. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: add upstream patch fixing SPI controller driverRafał Miłecki2017-12-294-127/+214
| | | | | | | | | | | | That patch fixes handling SPI messages with two writing transfers. It's important when using e.g. by m25p80 driver which uses one transfer for opcode and another one for data. Thanks to that fix we can now drop m25p80 workaround patch. It means one less hack and also a better flash writing performance as there is no more data buf copying. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ag71xx: Fix rx ring buffer stall on small packets flood on qca956x and qca953x.Vittorio Gambaletta2017-12-293-1/+22
| | | | | | Backported from Code Aurora QSDK Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
* x86: add NVMe support for motherboards w/ M.2 slotPhilip Prindeville2017-12-261-0/+3
| | | | | | | | A lot of 1U x86_64 servers have NVMe support, which is lower-power and higher speed than SSD or CFast drives, etc. The drivers required to make this work are trivial. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: bump 4.4 to 4.4.108Kevin Darbyshire-Bryant2017-12-261-1/+1
| | | | | | Refresh patches. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 4.9 to 4.9.72Kevin Darbyshire-Bryant2017-12-2613-39/+39
| | | | | | | | Refresh patches. Runtime tested: ar71xx - Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* linux: unbreak host tools build for 4.14Jonas Gorski2017-12-251-1/+1
| | | | | | | | Remove a stray -Wp left in host_c_flags causing build failures for newer 4.14 versions. Reported-by: Michael Marley <michael@michaelmarley.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm2708: use x86's upgrade scripts for all rpi targetsChristian Lamparter2017-12-251-9/+93
| | | | | | | | | | | | | | | Advantages: - preserves existing partition layout on the sd-card. Only the boot and rootfs partition will be overwritten. Please note that sysupgrade will refuse to upgrade, if the existing installation has an incompatible partition layout. Future changes to the bootfs and/or rootfs partition size will likely cause breakage to the sysupgrade procedure. In these cases, the ext4-sdcard.img.gz will have to be written to the sdcard manually. Please don't forget to backup your configuration in this case. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* brcm2708: convert to dt-based board-detectionChristian Lamparter2017-12-256-71/+20
| | | | | | | | | | | | Use the values populated by the generic board detect function. The first compatible from the device tree source file will be the board name in userspace. The model property from the device tree source file will be the model name. Change the board name where used in the userspace and drop the target specific board detect, to use the generic one. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* brcm2708: add compatible stringsChristian Lamparter2017-12-251-0/+70
| | | | | | | | | | | | | | | | This patch adds the compatible string for the various RPIs from 4.14 upstream. Note: The 4.14 upstream does not include the compute modules. If the CM* would just house the SoC, it could in theory use the "raw" chip compatible string. However, these CM boards also come with RAM and eMMC. So they have to have a proper comaptible. For now, "raspberrypi,compute-module-{1|3}" will be good enough. Note2: The original CM was renamed to CM1 when CM3 was released. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* brcm2708: convert to metadataChristian Lamparter2017-12-252-17/+7
| | | | | | | | | | This patch converts all the raspberrypi images to utilize the common metadata-based image verification. Note: the CM1 and CM3 currently use the same "rpi-cm" boardname. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ar71xx: spi-rb4xx: balance clk_prepare_enable() callGabor Juhos2017-12-241-2/+2
| | | | | | | | | | | | | Commit c312cef223dd ("ar71xx: spi-rb4xx fix.") replaced the clk_enable() call with clk_prepare_enable() to meet the common clock framework requirements. However it did not change the clk_disable() call in the error patch which thus leads to imbalance. Fix the code by using the correct counterpart of clk_prepare_enable() in both places. Fixes: c312cef223dd ("ar71xx: spi-rb4xx fix.") Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* kernel/4.14: add missing newline character to UBI messagesGabor Juhos2017-12-242-3/+3
| | | | | | | | | | | | | | | A few UBI messages lacks the trailing newline character which leads to ugly lines in the bootlog like this: [ 6.649159] UBI error: no valid UBI magic found inside mtd6[ 6.667751] Freeing unused kernel memory: 2196K Add a newline character to the end of the messages to fix it. After the fix the line from above looks better in the log: [ 6.609182] UBI error: no valid UBI magic found inside mtd6 [ 6.627599] Freeing unused kernel memory: 2132K Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* kernel/4.9: add missing newline character to UBI messagesGabor Juhos2017-12-242-3/+3
| | | | | | | | | | | | | | | A few UBI messages lacks the trailing newline character which leads to ugly lines in the bootlog like this: [ 6.649159] UBI error: no valid UBI magic found inside mtd6[ 6.667751] Freeing unused kernel memory: 2196K Add a newline character to the end of the messages to fix it. After the fix the line from above looks better in the log: [ 6.609182] UBI error: no valid UBI magic found inside mtd6 [ 6.627599] Freeing unused kernel memory: 2132K Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* kernel/4.4: add missing newline character to UBI messagesGabor Juhos2017-12-242-4/+4
| | | | | | | | | | | | | | | A few UBI messages lacks the trailing newline character which leads to ugly lines in the bootlog like this: [ 6.649159] UBI error: no valid UBI magic found inside mtd6[ 6.667751] Freeing unused kernel memory: 2196K Add a newline character to the end of the messages to fix it. After the fix the line from above looks better in the log: [ 6.609182] UBI error: no valid UBI magic found inside mtd6 [ 6.627599] Freeing unused kernel memory: 2132K Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* kernel: bump 4.4 to 4.4.107Kevin Darbyshire-Bryant2017-12-2317-64/+64
| | | | | | | | | | Refresh patches. Update patch that no longer applied: oxnas/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Rosen Penev <rosenp@gmail.com>
* lantiq: remove DSL_ChipSetHWVersion from status informationMartin Schiller2017-12-231-4/+2
| | | | | | | | | | | | The value DSL_ChipSetHWVersion is fetched from the dsl frontend via the dsl_control service, but not really provided by the dsl frontend firmware and for now always "UNKNOWN". The lantiq support told us that this information wouldn't be provided in the foreseeable future, so let's remove this useless "UNKNOWN" information. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ramips: fix Linkit smart 7688 supportMathias Kresin2017-12-233-24/+8
| | | | | | | | | | Use a more appropriate compatible string. Fix the wireless led GPIO and add the default wireless trigger. Use the wireless LED for boot state indication as well. Remove the GPIO pinmux for pins not exposed on the board. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for TP-Link TL-MR3420 v5Henryk Heisig2017-12-236-0/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link TL-MR3420 v5 are simple N300 router with 5-port FE switch and non-detachable antennas. Its very similar to TP-Link TL-WR841N V13. Specification: - MT7628N/N (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - USB 2.0 Port - UART (J1) header on PCB (115200 8n1) - 8x LED, 2x button, power input switch Flash instruction: The only way to flash LEDE image in mr3420v5 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.225/24 and tftp server. 2. Rename "lede-ramips-mt7628-tplink_tl-mr3420-v5-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: move common tplink image build code into own recipeMathias Kresin2017-12-231-8/+20
| | | | | | | | Move common tplink image build code into own recipe. Include the common parts instead of including a full build recipe and overwriting former set varaibles. Signed-off-by: Mathias Kresin <dev@kresin.me>