aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: compex wpj531 register usb supportJohn Crispin2015-07-091-0/+1
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46283
* ar71xx: compex wpj531 fix setting mac address on ethernetJohn Crispin2015-07-091-6/+5
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46282
* ar71xx: compex wpj531 fix ethernet registrationJohn Crispin2015-07-091-2/+2
| | | | | | | | | | | In fb6f62e97733312053ab593fcf68eea47a21169e several settings are set on the ethernet device, but they are not working. Fix Ethernet by setting the right values. Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46281
* ar71xx: ag71xx remove IRQF_DISABLEDJohn Crispin2015-07-091-1/+1
| | | | | | | | | | no-op since 2.6.35 removed in Kernel 4.1 see https://lwn.net/Articles/380931/ Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 46280
* mpc85xx: Enable RFKill and USB Power GPIO Control for WDR4900v1John Crispin2015-07-091-0/+11
| | | | | | | | | This patch adds the RFKill GPIO control switch and enables another GPIO to control power supply to USB Ports by emulating an LED GPIO for WDR4900v1. Signed-off-by: Guo Wei Lim <alphasparc@gmail.com> SVN-Revision: 46279
* ar71xx: fix board name orderingJohn Crispin2015-07-083-5/+5
| | | | | | | | r46248 added case statements in the same places Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46274
* base-files: implemented basic GPIO controlJohn Crispin2015-07-081-0/+25
| | | | | | | | | | Internal GPIO pins are used for PoE passthrough setups in multi-port routers. This patch implemnets control over this hardware feature for Ubiquiti Nanostations and TP-Link CPE510. Signed-off-by: Lars Kruse <lists@sumpfralle.de> SVN-Revision: 46271
* ar71xx: Fix LED-to-phy mapping for EnGenius ESR1750.John Crispin2015-07-081-2/+2
| | | | | | | | wlan5g is phy0tpt and wlan2g phy1tpt. Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46270
* malta: add harddisk supportJohn Crispin2015-07-081-0/+4
| | | | | | | | | | | | works with: qemu-system-mipsel -M malta \ -hda openwrt-malta-le-root.ext4 \ -kernel openwrt-malta-le-vmlinux.elf \ -nographic -append "root=/dev/sda console=ttyS0" Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 46269
* mpc85xx: disable SPE FPU support until musl gets support for it (fixes #19896)Felix Fietkau2015-07-081-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46268
* kernel: add missing config symbol (fixes #19880)Felix Fietkau2015-07-083-0/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46265
* kernel: add missing 4.1 config symbolFelix Fietkau2015-07-081-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46264
* Revert "ar71xx: Allow to use ath79_gpio_output_select on QCA955x" (r46240)Felix Fietkau2015-07-071-57/+0
| | | | | | | | It breaks the build Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46256
* ar71xx: Add support for Cisco-Linksys WAP4410NJohn Crispin2015-07-078-0/+307
| | | | | | | | | | This patch adds support for the Cisco WAP4410N, an access point that uses the AR9132 SoC. Web upgrades from stock are not yet possible, UART access required for the initial flash. Signed-off-by: Ryan A Young <rayoung@utexas.edu> SVN-Revision: 46250
* ar71xx: add support for D-Link DIR-615 rev. Ix boardJohn Crispin2015-07-0711-6/+189
| | | | | | | | Based on trunk r46212. Signed-off-by: Jaehoon You <teslamint@gmail.com> SVN-Revision: 46248
* mips: Free memory when load_module fails (#14453)John Crispin2015-07-074-15/+200
| | | | | | | | | | | | | | | | | | | | | | The mips reloc patch introduced new allocations which were done before add_unformed_module but never freed them in case of an error. A new hook in Linux 3.19 called module_arch_freeing_init can be used for freeing memory which were allocated during this init phase. The problem can be seen when trying to load a module (via busybox insmod) when it was already loaded. free -m for i in `seq 1 100`; do /sbin/insmod /lib/modules/*/ath9k.ko >& /dev/null done free -m This simple loop would leak ~3.2 MB. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46247
* ar71xx: Unify ath10k calibration data loadingJohn Crispin2015-07-072-87/+49
| | | | | | | | | | | | | Currently one board uses the "proper" way of providing firmware with the name ath10k/cal-pci-<pci address>.bin, whereas other boards patch board.bin template in preinit and rely on a custom ath10k patch to use calibration data from the template. This patch makes all boards use the first method. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 46244
* ar71xx: Use *_eth_cfg helper for Open Mesh MR900 boardsJohn Crispin2015-07-071-20/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46241
* ar71xx: Allow to use ath79_gpio_output_select on QCA955xJohn Crispin2015-07-071-0/+57
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46240
* ar71xx: add support for TL-WR741ND v5John Crispin2015-07-071-1/+9
| | | | | | | | | This device is identical to the TL-WR740N v5, it even uses the same HWID (which wasn't the case for older TL-WR741ND revisions). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46238
* generic: mtd backport for Spansion S25FL164KJohn Crispin2015-07-073-0/+36
| | | | | | | | | Backport for the Spansion S25FL164K It's a 8 MiB flash chip with 4 KiB erase sectors. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46237
* ar71xx: Add Support for the Bitmain Antminer S3John Crispin2015-07-0710-2/+171
| | | | | | | | | | This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s3 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46236
* ar71xx: allow pci calibration fixup to work with ar9344John Crispin2015-07-071-0/+3
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 46235
* ar71xx: add support for ubnt rocket-m tiJohn Crispin2015-07-077-1/+164
| | | | | | | | | | | rocket-m titanium is a device based on ar9344 with 802.11af poe. It doesn't use the SoC wifi, instead it's using an ar9280 connected to the pci bus. The gps version of the rocket-m ti is working, but gps is untested. The gps is connected to the first serial port. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 46234
* x86/xen_domu: enable image generationJohn Crispin2015-07-071-1/+1
| | | | | | | | | | | Add features ext4 targz to target x86/xen_domu in order to generate images in defconfig. This fixes #18074. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> SVN-Revision: 46233
* ar71xx: Enable sysupgrade on the Bitmain Antminer S1John Crispin2015-07-071-0/+1
| | | | | | | | This patch enables sysupgrade for the Bitmain Antminer S1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46228
* ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.John Crispin2015-07-071-2/+2
| | | | | | | | The designated blue WAN port on both devices has index 5, not 1. Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46227
* ar71xx: add LED defaults for the EnGenius EPG5000John Crispin2015-07-071-0/+5
| | | | | | | | NB that wlan5g is phy0tpt and wlan2g phy1tpt. Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46226
* lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)John Crispin2015-07-075-1/+185
| | | | | | | | lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V) Signed-off-by: Jannis Pinter <jannis@pinterjann.is> SVN-Revision: 46224
* lantiq: Add support for the BT Home Hub 5AJohn Crispin2015-07-077-2/+360
| | | | | | | | | | | | | | | u-boot support depends on the next "upstream" version ([0]) from Daniel Schwierzeck. Since the installation process is quite complicated a "how to" was added to the wiki: [1] [0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next [1] http://wiki.openwrt.org/toh/bt/homehub_v5a V2: Use the correct PCI interrupt (fixes 2.4GHz wifi) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 46223
* lantiq: Silence the printk when a PCIe error interrupt arrivesJohn Crispin2015-07-071-1/+1
| | | | | | | | | | Basically the only error I am seeing is "Correctable Error". Also newer lantiq PCIe drivers have this message wrapped in a "if debug enabled" block. So it should be safe to disable this warning. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 46222
* lantiq: Make the MEI address available for kernel driversJohn Crispin2015-07-071-0/+1
| | | | | | | | Newer DSL driver versions depend on the address information. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 46221
* generic: Allow configuring an increment with mtd-mac-addressJohn Crispin2015-07-073-12/+24
| | | | | | | | | This is useful if the device also has an ethernet WAN interface with a separate mac address (that is derived from the LAN mac address). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 46220
* lantiq: Change the data-type of mac address in ETOP driverJohn Crispin2015-07-072-10/+1
| | | | | | | | Make it consistent with the net_device struct and the xrx200 driver Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 46219
* lantiq: Add support for linux 4.1John Crispin2015-07-0739-0/+19662
| | | | | | | | | | | | | | | | All (still relevant) patches were refresh. The following patches were dropped because they are applied upstream: - 0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch - 0005-MIPS-lantiq-add-reset-controller-api-support.patch - 0006-MIPS-lantiq-reboot-gphy-on-restart.patch - 0009-MIPS-lantiq-command-line-work-around.patch - 0010-MIPS-lantiq-export-soc-type.patch - 0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch - 0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 46216
* ramips: a5-v11 board fix power led blinking at bootJohn Crispin2015-07-071-0/+6
| | | | | | Signed-off-by: Konrad Kotowicz <skoti1@go2.pl> SVN-Revision: 46215
* ramips: fix typo in WHR1166D mtd size variableJohn Crispin2015-07-071-1/+1
| | | | | | | | Fix typo in WHR1166D mtd size variable Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> SVN-Revision: 46214
* ar71xx: add support for ap143Felix Fietkau2015-07-079-0/+274
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> SVN-Revision: 46208
* ar71xx: rework patch for qca953x/956xFelix Fietkau2015-07-074-157/+379
| | | | | | | | | | | | | | | | | | | Patch cherry-picked from the following location: https://www.codeaurora.org/cgit/quic/qsdk/oss/system/openwrt/commit/?h=release/coconut_ioe4531_2.0&id=5c357bf6c763e4140dddcc9a3bc5f005525a9c0e Changelist, - add more register defines - add EHCI support - fix GPIO pin count to 18 - fix chained irq disabled - fix GMAC0/GMAC1 initial - fix WMAC irq number to 47 - merge the changes of dev-eth.c from the patch to file. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46207
* ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link ↵Felix Fietkau2015-07-072-0/+13
| | | | | | | | | | | | TL-WR841N/ND v9, Compex WPJ531) The initialization routines for these boards were relying on some (wrong) defaults for the QCA953x ethernet. Make these defaults explicit to prevent breaking them when the QCA953x defaults are fixed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46206
* ar71xx: fix kernel Oops in at803x_link_change_notifyFelix Fietkau2015-07-061-1/+1
| | | | | | | | | | | | r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range extender") introduced a pdata based modification of the tx_clk_dly. But it was not checked if pdata actually existed. This caused a page fault on all devices which didn't have at803x_platform_data specified for an at803x based device. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46200
* ar71xx: update preinit script for new ath10k firmwareFelix Fietkau2015-07-061-2/+2
| | | | | | | | | Update firmware name and md5sum. MAC-address location remains unchanged from previous version. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 46196
* ar71xx: fix UAP-PRO imagesFelix Fietkau2015-07-061-4/+4
| | | | | | | | | - it should be BOARDNAME instead of BOARD_NAME - kernel partition should be padded to 1536k (somehow this padding was lost in translation to BuildCode in bc797c73f6328941b2194d144385655ad9297e7c) Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 46193
* ar71xx: microtik: disable all non-microtik boardsJonas Gorski2015-07-051-3/+6
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46191
* ar71xx: EPG5000 requires ATH79_NVRAMJonas Gorski2015-07-051-1/+2
| | | | | | | | | | | EPG5000 uses ath79 nvram functions, but does not select it. This breaks build if no other board support enabling nvram support is selected. Closes #19952. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46190
* ixp4xx: add linux 4.1 supportJonas Gorski2015-07-0542-0/+9767
| | | | | | | | Compile tested only. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46189
* kernel: add a few more missing config symbolsJonas Gorski2015-07-051-0/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46188
* kernel: generic: add missing arm machtypesJonas Gorski2015-07-052-2/+14
| | | | | | | | | Some machtypes were dropped when 4.0 support was added, and the incomplete patch was taken over to 4.1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46187
* ar7: add linux 4.1 supportJonas Gorski2015-07-0514-2/+970
| | | | | | | | Compile tested only. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46186
* kernel: mips_disable_fpu: initialize fault_addr in fpu_emulator_cop1HandlerJonas Gorski2015-07-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Code calling fpu_emulator_cop1Handler will pass on fault_addr, making gcc complain about it not being initialized when the FPU emulator is disabled. Fixes: arch/mips/kernel/traps.c: In function 'do_fpe': arch/mips/kernel/traps.c:864:22: error: 'fault_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] process_fpemu_return(sig, fault_addr, fcr31); ^ arch/mips/kernel/traps.c: In function 'do_ri': arch/mips/kernel/traps.c:806:22: error: 'fault_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] process_fpemu_return(sig, fault_addr, fcr31); ^ arch/mips/kernel/traps.c:763:15: note: 'fault_addr' was declared here void __user *fault_addr; ^ arch/mips/kernel/traps.c: In function 'do_cpu': arch/mips/kernel/traps.c:1421:28: error: 'fault_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (!process_fpemu_return(sig, fault_addr, fcr31) && !err) ^ cc1: all warnings being treated as errors make[7]: *** [arch/mips/kernel/traps.o] Error 1 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46184
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 09:12:01 +0000