aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* mediatek: add support for Buffalo WSR-2533DHP2INAGAKI Hiroshi2021-03-157-0/+560
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Buffalo WSR-2533DHP2. The device uses the Broadcom TRX image format with a special magic. To be able to boot the images or load them they have to be wrapped with different headers depending how it is loaded. There are multiple ways to install OpenWrt on this device. Boot ramdisk from U-Boot ---------------------------- This will load the image and not write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux to SDRAM via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin 4. The system boots the image Write to flash from U-Boot ----------------------------- This will load the image over tftp and directly write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux Kernel then write to Flash via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin 4. The system writes this image into the flash and boots into it. Write to flash from Web UI ----------------------------- This will load the image over over the Web UI and write it into the flash 1. Open the Web UI 2. Go to "管理" -> "ファームウェア更新" 3. Select "ローカルファイル指定" and click "更新実行" 4. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin 5. The system writes this image into the flash and boots into it. Specifications ------------------- * SoC: MT7622 (4x4 2.4 GHz Wifi) * Wifi: MT7615 (4x4 5 GHz Wifi) * Flash: Winbond W29N01HZ 128MB SLC NAND * RAM 256MB * Ethernet: Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s) Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: support non standard trx magic valuesHauke Mehrtens2021-03-154-0/+196
| | | | | | | | | | | Buffalo uses the TRX format with a different magic, add support for this. It is planned to send these patches upstream. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: fix mtk parallel nand driverHauke Mehrtens2021-03-151-0/+36
| | | | | | | | This fixes some bugs in the mtk parallel nand driver introduced in 5.10. This patch was send upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: replace threaded NAPI implementation in 5.10 with upstream backportFelix Fietkau2021-03-1515-395/+639
| | | | | | This uses a kthread per NAPI instance instead of the workqueue approach Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: mt7622: clean up image buildDaniel Golle2021-03-141-22/+13
| | | | | | | | | | | | | * clean up whitespace to make GPT partitioning more readable * don't select packages already part of the target default selection * don't select U-Boot variants (breaks ImageBuilder) * don't select AHCI on boards without SATA * don't select kmod-usb2 and kmod-ohci, USB 1.x and USB 2.0 devices work fine with the in-SoC XHCI host having just kmod-usb3 installed. * select kmod-btmtkuart for devices with Bluetooth support * sort DEVICE_PACKAGES Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm4908: use accepted 5.13 DTS patchesRafał Miłecki2021-03-1412-50/+238
| | | | | | | | | | | | Some patches were slightly cleaned up. One things worth mentioning is that adding: phy-mode = "rgmii" broke SF2 driver. It made it access random register breaking switch setup. That's why this commit also adds a quick sf2 fix. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport first 5.13 DTS changesRafał Miłecki2021-03-143-1/+476
| | | | | | | This adds NVMEM bindings that are needed for proper booting on Linksys devices. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* x86: support kernel 5.10Tony Ambardar2021-03-1411-1/+1890
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add linux 5.10 as testing kernel, copy generic/subtarget configs and target patches from 5.4. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: update target patches for kernel 5.10 Refresh all patches while also dropping: 800-hwmon-w83627ehf-dont-claim-nct677x.patch which is now upstreamed as: 3207408ab4cb ("hwmon: (w83627ehf) remove nct6775 and nct6776 support") Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: refresh 5.10 target config Refresh config using "make kernel_oldconfig". Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: refresh and test all subtarget configs Refresh configs using "make kernel_oldconfig CONFIG_TARGET=subtarget". Build and run-tested using QEMU: x86/64, x86/legacy, x86/generic. Build-tested only: x86/geode. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [squashed commits] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: support new mdio_devres.ko module in 5.10Tony Ambardar2021-03-141-1/+1
| | | | | | | | | Add kmod-mdio-devres package and kernel config symbol, and update related kmod-r8169 and kmod-ixgbe package dependencies. Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: add missing config symbols for 5.10Tony Ambardar2021-03-141-0/+6
| | | | | | Update generic config to add missing options that prompt during builds. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* bmips: minor ethernet driver cleanups and fixesÁlvaro Fernández Rojas2021-03-141-62/+35
| | | | | | Add some minor ethernet driver cleanups and fixes to improve code quality. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: reorganize patchesÁlvaro Fernández Rojas2021-03-148-0/+0
| | | | | | Rename and reorganize backported patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* realtek: Add ZyXEL GS1900-8Hauke Mehrtens2021-03-142-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or SFP ports, but otherwise similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-8 v1.2 * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L12835F 16 MiB * RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM * Ethernet: 8x 10/100/1000 Mbit * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 8 ethernet port status LEDs (green, SoC controlled) * Buttons: 1 on-off glide switch at the back (not configurable) 1 reset button at the right side, behind the air-vent (not configurable) 1 reset button on front panel (configurable) * Power 12V 1A barrel connector * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB, towards the back. Pins are labelled: + VCC (3.3V) + TX (really RX) + RX (really TX) + GND the labelling is done from the usb2serial connector's point of view, so RX/ TX are mixed up. Serial connection parameters for both devices: 115200 8N1. Installation ------------ Instructions are identical to those for the GS1900-10HP and GS1900-8HP. * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-10HP is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot off the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: Add generic zyxel_gs1900 image definitionHauke Mehrtens2021-03-141-13/+13
| | | | | | | Add a new common device definition for the Zyxel GS1900 line of switches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bmips: add experimental ethernet supportÁlvaro Fernández Rojas2021-03-1420-1/+2401
| | | | | | | | | | | | | | | | | | This adds experimental ethernet support for BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268. BCM6358 needs a different driver, so there's no support for now. Working devices: - Comtrend AR-5315u - Comtrend AR-5387un - Comtrend VR-3025u - Comtrend VR-3032u Not working devices: - Netgear DGND3700 v2 (no idea on how the external switch is connected) - Huawei HG556a ver B (BCM6358 needs a separate driveer) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mvebu: LS421DE: make cosmetics changes in dts fileDaniel González Cabanelas2021-03-131-5/+11
| | | | | | | | | Make some cosmetic changes in the Buffalo LinkStation LS421DE NAS: - Delete pointless #xxx-cells - bootargs: replace earlyprintk with earlycon and remove unneeded args. - Separate pinmux nodes with empty lines. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* kernel: bump 5.10 to 5.10.23Kabuli Chana2021-03-139-102/+16
| | | | | | | | | | | | update kernel to 5.10.23, rebase patches, deleted upstreamed patch: target/linux/generic/backport-5.10/830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch compile / test - mvebu / mamba, rango Signed-off-by: Kabuli Chana <newtownBuild@gmail.com> [refresh again] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.105John Audia2021-03-1316-251/+15
| | | | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Removed upstreamed generic-backports: 830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch 831-v5.9-usbip-tools-fix-build-error-for-multiple-definition.patch 755-v5.8-net-dsa-add-GRO-support-via-gro_cells.patch Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64] [squash patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: image: don't use 'M' unit as dd may not support thatDaniel Golle2021-03-131-2/+2
| | | | | | | | | dd on Mac OS X apparently fails when using 'M' unit for bs. dd: bs: illegal numeric value Use 'k' unit instead for 'pad-to' to fix that. Reported-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm47xx: make WGT634U NVRAM patch apply againRafał Miłecki2021-03-121-19/+9
| | | | | Fixes: 1c48eee5b2bc ("kernel: backport Broadcom NVRAM driver cleanups") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add compatibility with upstream threaded NAPI patchFelix Fietkau2021-03-122-12/+41
| | | | | | | Enable threading if dev->threaded is set. This will be used to bring mt76 back in sync with upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update 5.10 flow offload patchesFelix Fietkau2021-03-1225-473/+845
| | | | | | Includes PPPoE support and VLAN related fixes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add pending mtd patches adding NVMEM supportRafał Miłecki2021-03-1218-17/+515
| | | | | | | | It's meant to provide upstream support for mtd & NVMEM. It's required e.g. for reading MAC address from mtd partition content. It seems to be in a final shape so it's worth testing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: move mtd ofpart accepted patchRafał Miłecki2021-03-122-0/+0
| | | | | | Move upstream patch to the backport directory. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add two more missed 5.10 backportsRafał Miłecki2021-03-122-0/+207
| | | | | | Those were added to 5.4 but missed while introducing 5.10 kernel. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: initialize NVRAM from NVMEM driverRafał Miłecki2021-03-122-0/+92
| | | | | | | | | | | NVRAM access may be needed early in boot process. Reading it using mtd happens quite late in the init process. Add NVRAM initialization to the NVMEM driver which comes up early and depends on IO mapping only. This is required by Linksys devices which use NVRAM content for proper partitioning (detecting current firmware partition). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport Broadcom NVRAM driver cleanupsRafał Miłecki2021-03-1210-0/+740
| | | | | | Refactoring of bcm47xx_nvram driver. It's used by bcm47xx and bcm53xx. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bmips: switch to upstream bcm2835-rng reset patchÁlvaro Fernández Rojas2021-03-123-5/+98
| | | | | | This patch has been accepted upstream. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* realtek: drop ethtool log noiseBjørn Mork2021-03-122-15/+15
| | | | | | | | | | | | | Demote a number of debugging printk's to pr_debug to avoid log nosie. Several of these functions are called as a result of userspace activity. This can cause a lot of log noise when userspace does periodic polling. Most of this could probably be removed completely, but let's keep it for now since these drivers are still in development. Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm53xx: backport NVMEM NVRAM driverRafał Miłecki2021-03-103-0/+181
| | | | | | | It supports NVRAM access described using DT binding. Right now NVRAM data is exposed using /sys/bus/nvmem/ only. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "bcm53xx: add support for reading NVRAM based on DT mapping"Rafał Miłecki2021-03-102-141/+0
| | | | | | | This reverts commit b0376462c164344d6be9fe1568a9f13ffd8fbb16. Those changes were rejected and were replaced with an NVMEM driver. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bmips: automatically detect RAM sizeÁlvaro Fernández Rojas2021-03-087-30/+196
| | | | | | | | | Introduce new patch for automatically detecting RAM size. Some boards have a different amount of RAM depending on the HW revision. Therefore, automatically detecting the RAM size instead of hard-coding it will reduce the number of device definitions. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: improve CPU frequency patchÁlvaro Fernández Rojas2021-03-081-10/+9
| | | | | | Fixes BCM6358 address and calculations. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: AD1018-nor: add NAND flashDaniel González Cabanelas2021-03-081-0/+24
| | | | | | | | | The Sercomm AD1018 has a NAND flash. We recently added support for NANDs in this target. Use the internal NAND as additional storage. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: dts: comestic changesÁlvaro Fernández Rojas2021-03-088-22/+18
| | | | | | Improve and refactor device tree files. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: remove unneeded console from bootargsÁlvaro Fernández Rojas2021-03-086-6/+6
| | | | | | console parameter is no longer needed after latest procd update. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: automatically detect CPU frequencyÁlvaro Fernández Rojas2021-03-081-0/+239
| | | | | | | Some BCM63xx SoCs support multiple CPU frequencies depending on HW configuration. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mediatek: remove no longer needed sysupgrade hackDaniel Golle2021-03-071-18/+0
| | | | | | | Keeping configuration is now handled in fstools like for other types of flash as well. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: remove execute bit and shebang from 01_ledsAdrian Schmutzler2021-03-061-2/+0
| | | | | | | This was added recently and thus overlooked in 85b1f4d8ca2d ("treewide: remove execute bit and shebang from board.d files"). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: work-around borked QCA SDK bootloaderDaniel Golle2021-03-061-0/+1
| | | | | | | | | | | | | | | | | The bootloader of many ipq806x boards seems to require the config node of the FIT image to be 'config@1' (or a secific different value). This requirement used to be implicitely satisfied because OpenWrt used to also call the configuration node inside a FIT image 'config@1'. However, as recent U-Boot now prohibits the use of the '@' symbol as part of node names, this was changed by commit 5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes") Explicitely restore the default name of the configuration node to 'config@1' on ipq806x. (ipq807x is unaffected as DEVICE_DTS_CONFIG default is set "config@hk01" in target/linux/ipq807x/image/Makefile) Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: work-around borked QCA SDK bootloaderDaniel Golle2021-03-061-0/+1
| | | | | | | | | | | | | | | The bootloader of many ipq40xx boards seems to require the config node of the FIT image to be 'config@1' (or a secific different value). This requirement used to be implicitely satisfied because OpenWrt used to also call the configuration node inside a FIT image 'config@1'. However, as recent U-Boot now prohibits the use of the '@' symbol as part of node names, this was changed by commit 5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes") Explicitely restore the default name of the configuration node to 'config@1' on ipq40xx. Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: disable RTC on Bananapi R64 and refresh patchesDaniel Golle2021-03-064-5/+26
| | | | | | | | The in-SoC RTC of the Bananapi R64 is more disruptive than useful without a battery connected. Disable it to not have Linux use the RTC provided time 2000-01-01 00:00:00 after power-loss. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* treewide: make AddDepends/usb-serial selectiveAdrian Schmutzler2021-03-066-11/+11
| | | | | | | Make packages depending on usb-serial selective, so we do not have to add kmod-usb-serial manually for every device. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove execute bit and shebang from board.d filesAdrian Schmutzler2021-03-0690-90/+0
| | | | | | | | | | | | | | | | So far, board.d files were having execute bit set and contained a shebang. However, they are just sourced in board_detect, with an apparantly unnecessary check for execute permission beforehand. Replace this check by one for existance and make the board.d files "normal" files, as would be expected in /etc anyway. Note: This removes an apparantly unused '#!/bin/sh /etc/rc.common' in target/linux/bcm47xx/base-files/etc/board.d/01_network Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: 5.10: refresh configsIlya Lipnitskiy2021-03-066-28/+28
| | | | | | | | Run-tested on Ubiquiti EdgeRouter X. Compile tested on all other subtargets. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: 5.10: port and refresh patches, ralink drvIlya Lipnitskiy2021-03-0634-201/+333
| | | | | | | | | | | | | | | | | | | Enable testing kernel. Fix compile errors by using new kernel APIs. Fix fuzz by manually editing patches to ensure the code goes in the right place. For 721-NET-no-auto-carrier-off-support.patch, revert upstream commit a307593a6 to keep the OpenWrt ralink driver operational. Add mt7621-pci-phy patch to select REGMAP_MMIO as discussed in PR #3693 and #3952. Run automatic quilt refresh on the rest. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: 5.10: rename patches to follow guideIlya Lipnitskiy2021-03-0636-0/+0
| | | | | | | | | Rename patches to follow the 3-digit classification from the OpenWrt Developer Guide. https://openwrt.org/docs/guide-developer/build-system/use-patches-with-buildsystem#naming_patches Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: 5.10: delete upstreamed patchesIlya Lipnitskiy2021-03-0629-2440/+0
| | | | | | | | 0098-disable_cm.patch is not needed because upstream fixed CM handling. The rest are straightforward removals of upstreamed patches. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: 5.10: copy patches from 5.4Ilya Lipnitskiy2021-03-0667-0/+8783
| | | | | | Strict copy, no changes made. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: copy config-5.4 to config-5.10Ilya Lipnitskiy2021-03-066-0/+1202
| | | | | | Strict copy, no changes made. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-28 20:18:54 +0000