aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* bcm53xx: remove support for kernel 4.14Adrian Schmutzler2020-05-3042-4583/+0
| | | | | | | | | We currently support three kernel versions on this target, let's just get rid of the oldest one. Cc: Rafał Miłecki <rafal@milecki.pl> Cc: John Crispin <john@phrozen.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm47xx: remove support for kernel 4.14Adrian Schmutzler2020-05-3025-2795/+0
| | | | | | | | We currently support three kernel versions on this target, let's just get rid of the oldest one. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: fix splitting firmware partition for TL-WR902AC v1Adrian Schmutzler2020-05-301-0/+2
| | | | | | | | | | | | The -O option for the tplink-v1-header was missing for the TP-Link TL-WR902AC v1, while safeloader and MTDPARTS where set up with a single firmware partition. This led to bootloops after using sysupgrade. Fixes: FS#3118 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm27xx: update to latest patches from RPi foundationÁlvaro Fernández Rojas2020-05-28560-220/+373
| | | | | | | Also removes random module and switches to new bcm2711 thermal driver. Boot tested on RPi 4B v1.1 4G. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* linux: mvebu: backport mvneta XDP support fixesJakov Petrina2020-05-284-0/+200
| | | | | | | | | | | | This patch backports additional fixes for XDP support in the mvneta driver. These changes are found upstream as commits: b37fa92e20ef2 net: mvneta: fix build skb for bm capable devices f383b2950070c net: mvneta: rely on page_pool_recycle_direct in mvneta_run_xdp 79572c98c554d mvneta driver disallow XDP program on hardware buffer management 44efc78d0e464 net: mvneta: fix XDP support if sw bm is used as fallback Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
* linux: mvebu: backport mvneta XDP supportJakov Petrina2020-05-288-4/+1322
| | | | | | | | | | | | | | | | | | | | | | This patch backports XDP support in the mvneta driver used by Marvell ARMADA 37x, 38x and 37xx series SoCs. Supported actions are: - XDP_DROP - XDP_PASS - XDP_REDIRECT - XDP_TX Patches are present upstream as following commits: * b0a43db9087a net: mvneta: add XDP_TX support * 9e58c8b41065 net: mvneta: make tx buffer array agnostic * fa383f6b77a2 net: mvneta: move header prefetch in mvneta_swbm_rx_frame * 0db51da7a8e9 net: mvneta: add basic XDP support * 8dc9a0888f4c net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine * 568a3fa24a95 net: mvneta: introduce page pool API for sw buffer manager * ff519e2acd46 net: mvneta: introduce mvneta_update_stats routine Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
* packages/boot: remove rbcfgThibaut VARÈNE2020-05-282-2/+1
| | | | | | | The new sysfs soft_config driver makes buggy rbcfg obsolete and entirely replaces it. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: routerboot sysfs: soft_config support for ath79 cpufreqThibaut VARÈNE2020-05-281-2/+64
| | | | | | | | | | | | This commit introduces support for R/W access to the CPU frequency setting of routerboot on ath79 hardware. On unsupported hardware, the sysfs attribute will expose the raw tag value (read-only) to help with reverse engineering its meaning. Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: routerboot sysfs: move tag_show_u32()Thibaut VARÈNE2020-05-283-22/+23
| | | | | | | | This routine will be shared between hard and soft config drivers. Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: routerboot sysfs: add support for soft_configThibaut VARÈNE2020-05-286-2/+711
| | | | | | | | | | | | | | | | | | | This driver exposes the data encoded in the "soft_config" flash segment of MikroTik RouterBOARDs devices. It presents the data in a sysfs folder named "soft_config" through a set of human-and-machine-parseable attributes. Changes can be discarded by writing 0 to the 'commit' attribute, or they can be committed to flash storage by writing 1. This driver does not reuse any of the existing code previously found in the "rbcfg" utility and makes this utility obsolete by providing a clean sysfs interface. Like "rbcfg", this driver requires 4K_SECTORS support since the flash partition in which these parameters are stored is typically 4KB in size. Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: routerboot sysfs: move tag_show_string()Thibaut VARÈNE2020-05-283-11/+15
| | | | | | | | | This routine will be shared between hard and soft config drivers. Also use scnprintf() instead of snprintf(). Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: platform/mikrotik: rb_hardconfig.c minor fixesThibaut VARÈNE2020-05-281-7/+14
| | | | | | | | | | | | | For the sake of strictly typed code, add a missing const qualifier. Add a missing return value in error path. Check the return value of mtd_read(), for good measure. Also demote the error printks of failed sysfs file creation to warn level since they are not fatal in the init() sequence. Finally, add a note regarding PAGE_SIZE and clarify a comment. Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: platform/mikrotik: reorder KconfigThibaut VARÈNE2020-05-281-2/+2
| | | | | | | | | The depends and select should apply to the sysfs driver, not the meta config. Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* bcm27xx: update patches from RPi foundationÁlvaro Fernández Rojas2020-05-28416-676/+37487
| | | | | | | | | bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: remove linux 4.19 supportÁlvaro Fernández Rojas2020-05-28826-219516/+0
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath79: add support for COMFAST CF-E130N v2Pavel Balan2020-05-284-0/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the COMFAST CF-E130N v2, an outdoor wireless CPE with a single Ethernet port and a 802.11bgn radio. Specifications: - QCA9531 SoC - 1x 10/100 Mbps Ethernet with PoE-in support - 64 MB of RAM (DDR2) - 16 MB of FLASH - 5 dBi built-in antenna - POWER/LAN/WLAN green LEDs - 4x RSSI LEDs (2x red, 2x green) - UART (115200 8N1) and GPIO (J9) headers on PCB Flashing instructions: The original firmware is based on OpenWrt so a sysupgrade image can be installed via the stock web GUI. The U-boot bootloader also contains a backup TFTP client to upload the firmware from. Upon boot, it checks its ethernet network for the IP 192.168.1.10. Host a TFTP server and provide the image to be flashed as file firmware_auto.bin. MAC address setup: The art partition contains four consecutive MAC addresses: 0x0 aa:bb:cc:xx:xx:c4 0x6 aa:bb:cc:xx:xx:c6 0x1002 aa:bb:cc:xx:xx:c5 0x5006 aa:bb:cc:xx:xx:c7 However, the manufacturer in its infinite wisdom decided that one address is enough and both eth0 and WiFi get the MAC address from 0x0 (yes, that's overwriting the existing and valid address in 0x1002). This is obviously also the address on the device's label. Signed-off-by: Pavel Balan <admin@kryma.net> [fix configs partition, fix IMAGE_SIZE, add MAC address comment, rename ATH_SOC to SOC] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: replace tab after DT label by spaceAdrian Schmutzler2020-05-288-8/+8
| | | | | | The common separator in this case is a single space. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: fix LED DT label for Zyxel Keenetic StartAdrian Schmutzler2020-05-271-5/+5
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: increase spi clock for D-Link DIR-842Sebastian Schaper2020-05-261-1/+2
| | | | | | | | | AHB is 258 MHz for this device (CPU_PLL / 3), but there is no difference between 64 MHz and 50 MHz for spi-max-frequency, thus increase to 50 MHz. Tested on revisions C1 and C3. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* ath79: define switch reset-gpios for D-Link DIR-842Sebastian Schaper2020-05-261-8/+2
| | | | | | | | | | GPIO 11 needs to be pulled high for the external gigabit switch to work, this is currently solved via gpio-hog. Replace with phy0 reset-gpios. Tested on revisions C1 and C3. Reset button is still working for reboot, to enter failsafe, and to enter bootloader http recovery. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* ath79: fix LEDs for D-Link DIR-842Sebastian Schaper2020-05-264-30/+12
| | | | | | | | | | | | | | | The device has a total of 8 LEDs, 5 of which are controlled by the switch (LAN 1-4, WAN). Only power, wifi and wps are controlled by the SoC. * led_power is on GPIO 5 (not 15), boot flashing sequence is now visible * remove led 'internet', since it is only connected to the switch * remove ucidef_set_led_switch for WAN from 01_leds, as it has no effect Tested on revisions C1 and C3. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> [adjust commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: create shared DTSI for DIR-810L and TEW-810DRAdrian Schmutzler2020-05-263-223/+118
| | | | | | | These devices seem to have the same board, so let's have a common file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for TRENDnet TEW-810DRJ. Scott Heppler2020-05-264-1/+181
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * MediaTek MT7620A (580 Mhz) * 8 MB of FLASH * 64 MB of RAM * 2.4Ghz and 5.0Ghz radios * 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN) * UART header on PCB (57600 8n1) * Green/Orange Power LEDs illuminating a Power-Button Lens * Green/Orange Internet LEDs GPIO controlled illuminating a Globe/Internet Lens * 3x button - wps, power and reset * U-boot bootloader Installation: The sysupgrade.bin image is reported to be OEM web flashed with an ncc_att_hwid appended. ncc_att_hwid is a 32bit binary in the GPL Source download for either the TEW-810DR or DIR-810L and is located at source/user/wolf/cameo/ncc/hostTools. The invocation is: ncc_att_hwid -f tew-810dr-squashfs-factory.bin -a -m "TEW-810DR" -H "1.0R" -r "WW" -c "1.0" This may need to be altered if your hardware version is "1.1R". The image can also be directly flashed via serial tftp: 1. Load *.sysupgrade.bin to your tftp server directory and rename for convenience. 2. Set a static ip 192.168.10.100. 3. NIC cable to a lan port. 4. Serial connection parameters 57600,8N1 5. Power on the TEW-810 and press 4 for a u-boot command line prompt. 6. Verify IP's with U-Boot command "printenv". 7. Adjust tftp settings if needed per the tftp documentation 8. Boot the tftp image to test the build. 9. If the image loads, reset your server ip to 192.168.1.10 and restart network. 10. Log in to Luci, 192.168.1.1, and flash the *sysupgrade.bin image. Notes: The only valid MAC address is found in 0x28 of the factory partition. Other typical offsets/caldata only contain example data: 00:11:22:00:0f:xx Signed-off-by: J. Scott Heppler <shep971@centurylink.net> [remove "link rx tx" in 01_leds, format and extend commit message, fix DTS led node names] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79/mikrotik: add missing kernel config symbol for 5.4Roger Pueyo Centelles2020-05-261-0/+1
| | | | | | | | The UBIFS_FS_ZSTD is exposed when UBIFS is enabled. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [adjust commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: properly insert local mtd partition parsersAdrian Schmutzler2020-05-254-41/+48
| | | | | | | | | | | | | | | | Between 4.19 and 5.4, the kernel moved the partition parsers into the parsers subdirectory. This led to some necessary rebasing of our local patches for parsers, which partially has been performed without caring about where the code was inserted. This commit tries to adjust our local patches so that parsers are inserted at the "proper" positions with respect to alphabetic sorting (if possible). Thus, the commit is cosmetic. While this might look useless now, it will make life easier when adding other parsers in the future or for rebasing on kernel changes. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: remove a bunch of trailing whitespacesAdrian Schmutzler2020-05-252-57/+57
| | | | | | | | These trailing whitespaces were reported during kernel patch refresh. While at it, harmonize a few indents as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: drop backported gpio emulated open drain output fixAdrian Schmutzler2020-05-2520-191/+49
| | | | | | | | | | | This patch has been backported to stable kernel 5.4 already. Remove our local patch explicitly now, as by applying the patch (or refreshing) the relevant code is actually added a second time. Refresh remaining patches as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: set 5.4 as default kernelAdrian Schmutzler2020-05-251-1/+1
| | | | | | | octeon has provided 5.4 as testing kernel for some time now, let's switch to 5.4 to have a bigger audience for testing. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeontx: remove support for kernel 4.14Adrian Schmutzler2020-05-252-672/+0
| | | | | | | | Kernel 5.4 is stable for about two months now and there is only a few patches anyway, so this is mostly upstream stuff. Therefore, it does not look like we need to keep old 4.14 around any longer. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* archs38: remove support for kernel 4.14Adrian Schmutzler2020-05-252-239/+0
| | | | | | | | Kernel 5.4 is stable for about two months now and there is only one patch anyway, so this is mostly upstream stuff. Therefore, it does not look like we need to keep old 4.14 around any longer. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: remove support for kernel 4.14Yangbo Lu2020-05-2544-262807/+0
| | | | | | | Remove support for kernel 4.14, and NXP Layerscape SDK had not supported kernel 4.14 since LSDK-20.04 either. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* bcm63xx: ar-5315u: expose LEDs through controllerÁlvaro Fernández Rojas2020-05-241-36/+86
| | | | | | | Exposing LEDs through LED controller instead of gpio-leds takes advantage of HW blinking. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: ar-5387un: expose LEDs through controllerÁlvaro Fernández Rojas2020-05-241-26/+42
| | | | | | | Exposing LEDs through LED controller instead of gpio-leds takes advantage of HW blinking. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: ar-5381u: expose LEDs through controllerÁlvaro Fernández Rojas2020-05-241-19/+34
| | | | | | | Exposing LEDs through LED controller instead of gpio-leds takes advantage of HW blinking. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: add alternative name for Buffalo WSR-2533DHPINAGAKI Hiroshi2020-05-241-0/+2
| | | | | | | Buffalo WSR-2533DHP is identical to the WSR-2533DHPL, Buffalo sold it with renaming. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: add support for Asus RT-N10P V3 / RT-N11P B1 / RT-N12 VP B1Ernst Spielmann2020-05-247-9/+244
| | | | | | | | | | | | | | | | | | | | | | | | Specifications: - MT7628NN @ 580 MHz - 32 MB RAM - 8 MB Flash - 5x 10/100 Mbps Ethernet (built-in switch) - 2.4 GHz WLAN - 2x external, non-detachable antennas (1x for RT-N10P V3) Flash instructions: 1. Set PC network interface to 192.168.1.75/24. 2. Connect PC to the router via LAN. 3. Turn router off, press and hold reset button, then turn it on. 4. Keep the button pressed till power led starts to blink. 5. Upload the firmware file via TFTP. (Any filename is accepted.) 6. Wait until the router reboots. Signed-off-by: Ernst Spielmann <endspiel@disroot.org> [fix node/property name for state_default] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79/nand: add support for Netgear WNDR4300SWStijn Segers2020-05-245-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the WNDR4300SW, marketed by California ISP SureWest (hence the 'SW' suffix). Hardware wise, it's identical to the WNDR4300 v1. Specifications: * SoC: Atheros AR9344 * RAM: 128 MB * Flash: 128 MB NAND flash * WiFi: Atheros AR9580 (5 GHz) and AR9344 (2,4 GHz) * Ethernet: 5x 1000Base-T * LED: Power, WAN, LAN, WiFi, USB, WPS * UART: on board, to the right of the RF shield at the top of the board Installation: * Flashing through the OEM web interface: + Connect your computer to the router with an ethernet cable and browse to http://192.168.1.1/ + Log in with the default credentials are admin:password + Browse to Advanced > Administration > Firmware Upgrade in the Netgear interface + Upload the Openwrt firmware: openwrt-ath79-nand-netgear_wndr4300sw-squashfs-factory.img + Proceed with the firmware installation and give the device a few minutes to finish and reboot. * Flashing through TFTP: + Configure your wired client with a static IP in the 192.168.1.x range, e.g. 192.168.1.10 and netmask 255.255.255.0. + Power off the router. + Press and hold the RESET button (the factory reset button on the bottom of the device, with the red circle around it) and turn the router on while keeping the button pressed. + The power LED will start flashing orange. You can release the button once it switches to flashing green. + Transfer the image over TFTP: $ tftp 192.168.1.1 -m binary -c put openwrt-ath79-nand-netgear_wndr4300sw-squashfs-factory.img Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ramips: fix 04_led_migration case syntax for mt7621Russell Senior2020-05-231-1/+3
| | | | | | | | | | | | | Commit f761f4052c4 had bogus case syntax, the uci-defaults script threw errors as a result and exited non-zero, probably didn't do what was intended, but tried over and over since the non-zero exit prevents the script from being deleted. Fixes: f761f4052c41 ("ramips: mt7621: harmonize naming scheme for Mikrotik") Signed-off-by: Russell Senior <russell@personaltelco.net> [extend commit title, add Fixes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for Enterasys WS-AP3705iDavid Bauer2020-05-226-1/+261
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Atheros AR9344 RAM: 128M DDR2 FLASH: 2x Macronix MX25L12845EM 2x 16MiB SPI-NOR WLAN2: Atheros AR9344 2x2 2T2R WLAN5: Atheros AR9580 2x2 2T2R SERIAL: Cisco-RJ45 on the back (115200 8n1) Installation ------------ The U-Boot CLI is password protected (using the same credentials as the OS). Default is admin/new2day. 1. Download the OpenWrt initramfs-image. Place it into a TFTP server root directory and rename it to 1401A8C0.img. Configure the TFTP server to listen at 192.168.1.66/24. 2. Connect the TFTP server to the access point. 3. Connect to the serial console of the access point. Attach power and interrupt the boot procedure when prompted (bootdelay is 1 second). 4. Configure the U-Boot environment for booting OpenWrt from Ram and flash: $ setenv boot_openwrt 'setenv bootargs; bootm 0xbf230000' $ setenv ramboot_openwrt 'setenv serverip 192.168.1.66; tftpboot 0x85000000; bootm' $ setenv bootcmd 'run boot_openwrt' $ saveenv 5. Load OpenWrt into memory: $ run ramboot_openwrt Wait for the image to boot. 6. Transfer the OpenWrt sysupgrade image to the device. Write the image to flash using sysupgrade: $ sysupgrade -n /path/to/openwrt-sysuograde.bin Signed-off-by: David Bauer <mail@david-bauer.net>
* brcm63xx: add support for ADB P.DG A4001N A-000-1A1-AXDaniele Castro2020-05-226-0/+254
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ADB P.DG A4001N A-000-1A1-AX a.k.a. Telecom Italia ADSL2+ Wi-Fi N (AGPWI) has the same PCB as the OpenWrt's ADB P.DG A4001N1 with LEDs connected to different GPIO PINs in active low configuration. OpenWrt's ADB P.DG A4001N image is made for the ADB P.DG A4001N A-000-1A1-AE. It has different LEDs configuration and flash size/layout w.r.t the ADB P.DG A4001N A-000-1A1-AX. Hardware: * Board ID: 96328avng * SoC: Broadcom BCM6328 * RAM DDR2-800: 32 Mbyte - winbond W9725G6KB-25 * Serial flash: 16 Mbyte - MXIC MX25L 12845EMI-10G * Ethernet: 4x Ethernet 10/100 baseT * Wifi 2.4GHz: Broadcom Corporation BCM43224/5 Wireless Network Adapter (rev 01) * LEDs: 2x Power, 2x ADSL, 2x Internet, 2x Wi-Fi, 2x Service * Buttons: 1x Reset, 1x WPS (named WiFi/LED) * UART: 1x TTL 115200n8, TX NC RX, on J5 connector (short R192 and R193) NC GND NC Installation via CFE: * Stock CFE has to be overwriten with one for 96328avng boards that can upload .bin images with no signature check (cfe-A4001N-V0000_96328avng.bin) * connect a serial port to the board * Stop the boot process after power on by pressing enter * set static IP 192.168.1.2 and subnet mask 255.255.255.0 * navigate to http://192.168.1.1/ * upload the OpenWrt image file Signed-off-by: Daniele Castro <danielecastro@hotmail.it> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: use model part of board name as variable in 01_ledsAdrian Schmutzler2020-05-221-10/+11
| | | | | | | | This extracts the model part of the board name and uses it for the LED string identifiers in 01_leds. As this makes statements more generic, it will allow to merge more cases in the future. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: replace further "ok" with "okay" in DTS filesAdrian Schmutzler2020-05-224-9/+9
| | | | | | | While "ok" is recognized in DT parsing, only "okay" is actually mentioned as valid value. Replace it accordingly. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: Do not build buffalo_whr-g301n by defaultHauke Mehrtens2020-05-211-0/+1
| | | | | | The squashfs partition is getting too big. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm63xx: WIP: add Huawei HG253s v2 supportÁlvaro Fernández Rojas2020-05-216-0/+265
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: nand: support CFE partition tagsÁlvaro Fernández Rojas2020-05-212-0/+22
| | | | | | | | Introduce support for generating JFFS2 CFE partition tags. This is used in NAND devices in order to verify the integrity of the JFFS2 partition. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: improve rgmii ctrl overridesÁlvaro Fernández Rojas2020-05-2127-60/+84
| | | | | | | There are older devices which require overriding the RGMII ports, so this shouldn't be limited and forced to BCM63268. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: dgnd3700-v1: add NAND supportÁlvaro Fernández Rojas2020-05-211-0/+26
| | | | | | | NAND is used as extra storage on this device. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: nand: fix v2.1 controller supportÁlvaro Fernández Rojas2020-05-211-8/+40
| | | | | | Page size shift is different from v2.2+ controllers Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: backport the I2C bus recovery for uDPURussell King2020-05-211-0/+60
| | | | | | | Backport the I2C bus recovery DT configuration for the uDPU that has been queued for 5.8. Signed-off-by: Russell King <linux@armlinux.org.uk>
* kernel: backport v5.8 i2c-pxa updatesRussell King2020-05-2119-0/+1844
| | | | | | | Add i2c-pxa updates queued for v5.8, which add bus recovery to this driver; this is needed for the uDPU platform. Signed-off-by: Russell King <linux@armlinux.org.uk>