aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
...
* ar71xx: allow to use LAN LED on the TL-WA901N/ND boardsGabor Juhos2012-01-042-0/+15
| | | | SVN-Revision: 29653
* ar71xx: add default LED configuration for the TL-MR3020Gabor Juhos2012-01-042-0/+6
| | | | | | Also use the system LED for diagnostic. SVN-Revision: 29652
* ar71xx: add support for TP-Link TL-MR3020Gabor Juhos2012-01-0410-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29651
* ar71xx: use the new om-watchdog package for OM2PGabor Juhos2012-01-041-1/+1
| | | | | | Signed-off-by: Antonio Quartulli <ordex@autistici.org> SVN-Revision: 29648
* remove current RTSP supportJo-Philipp Wich2012-01-049-12294/+0
| | | | SVN-Revision: 29643
* backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to ↵Jo-Philipp Wich2012-01-032-0/+82
| | | | | | affected kernels (#9802) commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. SVN-Revision: 29642
* ar71xx: add profile and build factory image for the Hornet-UB boardGabor Juhos2012-01-012-13/+24
| | | | SVN-Revision: 29637
* ar71xx: build images for the ALFA Network N2/N5 boardsGabor Juhos2012-01-012-0/+41
| | | | SVN-Revision: 29636
* ar71xx: add support for the ALFA Network N2/N5 boardsGabor Juhos2012-01-0110-0/+183
| | | | SVN-Revision: 29635
* ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boardsGabor Juhos2011-12-313-6/+103
| | | | SVN-Revision: 29631
* ar71xx: enable SWCONFIG_LEDSGabor Juhos2011-12-311-0/+1
| | | | SVN-Revision: 29630
* kernel: swconfig: introduce a generic switch LED triggerGabor Juhos2011-12-319-3/+385
| | | | SVN-Revision: 29627
* ar71xx: ag71xx: implement get_port_{link,stats} callbacksGabor Juhos2011-12-311-0/+142
| | | | SVN-Revision: 29626
* kernel: swconfig: add get_port_{link,stats} callbacksGabor Juhos2011-12-311-0/+26
| | | | SVN-Revision: 29625
* ar71xx: fix LEDs on the WRT400NGabor Juhos2011-12-312-12/+13
| | | | SVN-Revision: 29624
* ramips: rt288x: add support for the Belkin F5D8235-4 v1 boardGabor Juhos2011-12-2811-1/+184
| | | | | | Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29617
* ramips: rt288x: change base address and window size of flash bank 0Gabor Juhos2011-12-281-2/+2
| | | | SVN-Revision: 29616
* ramips: rt305x: add support for the ALFA Networks W502U (R36) boardGabor Juhos2011-12-2813-3/+166
| | | | SVN-Revision: 29615
* ar71xx: enable sysupgrade support for airrouterGabor Juhos2011-12-271-0/+1
| | | | | | | | Works for me! ;-) Patch-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 29614
* ar71xx: fix sysupgrade on PB42/PB44 boardsGabor Juhos2011-12-271-2/+4
| | | | SVN-Revision: 29613
* ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N boardGabor Juhos2011-12-2711-1/+189
| | | | SVN-Revision: 29612
* add missing config symbolJo-Philipp Wich2011-12-259-0/+9
| | | | SVN-Revision: 29610
* brcm47xx: fix usb on more recent bcma based devices.Hauke Mehrtens2011-12-231-4/+5
| | | | SVN-Revision: 29605
* ramips: initial support for Sitecom WL-351 v1 002Gabor Juhos2011-12-2313-5/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604
* ramips: add support for the Senao/EnGenius ESR-9753 boardGabor Juhos2011-12-2314-1/+190
| | | | | | Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603
* ramips: define firmware partition for Omnima MiniEMBWiFiGabor Juhos2011-12-231-0/+4
| | | | | | Patch-by: Ivan Ignjatic <ivan@omnima.co.uk> SVN-Revision: 29602
* ar71xx: set a reserved bit that resets to 1 when writing the address table ↵Felix Fietkau2011-12-221-0/+2
| | | | | | control register on the ar7240 switch (should fix #10547) SVN-Revision: 29598
* ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450HJonas Gorski2011-12-211-0/+8
| | | | | | Thanks netprince for reporting and testing. SVN-Revision: 29595
* the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the ↵Jo-Philipp Wich2011-12-211-1/+1
| | | | | | WZR-HP-AG300H, correct the id (#10649) SVN-Revision: 29593
* brcm47xx: remove patch starting adding brcm4716 to ssbHauke Mehrtens2011-12-191-104/+0
| | | | | | brcm4716 is supported by bcma now we do not need this patch SVN-Revision: 29576
* brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.Hauke Mehrtens2011-12-1910-521/+1768
| | | | | | This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more. SVN-Revision: 29575
* kernel: update bcma and ssb to version master-2011-12-16 from wireless-testingHauke Mehrtens2011-12-1931-3949/+17429
| | | | SVN-Revision: 29574
* brcm47xx: remove support for kernel 2.6.39Hauke Mehrtens2011-12-1936-3310/+0
| | | | | | There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches. SVN-Revision: 29573
* ar71xx: add missing wireless led changes for wzr-hp-g300nh2Felix Fietkau2011-12-191-6/+1
| | | | SVN-Revision: 29568
* ar71xx: add support for the wzr-hp-g300nh2Felix Fietkau2011-12-1810-0/+231
| | | | | | Signed-off-by: Mark Deneen <mdeneen@gmail.com> SVN-Revision: 29567
* ar71xx: use 64kraw template on more TP-Link boardsGabor Juhos2011-12-171-4/+4
| | | | SVN-Revision: 29561
* ar71xx: connect GMAC0 to the internal switch on DB120Gabor Juhos2011-12-152-1/+35
| | | | | | | | Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. SVN-Revision: 29557
* ar71xx: add defines for the AR934X GMAC interfaceGabor Juhos2011-12-151-0/+21
| | | | SVN-Revision: 29556
* ar71xx: fix GMAC1 interface speed on the DB120 boardGabor Juhos2011-12-151-1/+1
| | | | SVN-Revision: 29555
* ar71xx: ag71xx: fix switch port setup for AR934XGabor Juhos2011-12-151-11/+41
| | | | SVN-Revision: 29554
* ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934XGabor Juhos2011-12-152-4/+8
| | | | SVN-Revision: 29553
* ar71xx: ag71xx: setup switch interface mode on AR934XGabor Juhos2011-12-151-0/+19
| | | | SVN-Revision: 29552
* ar71xx: ag71xx: detect the built-in switch of the AR934X SoCsGabor Juhos2011-12-151-12/+36
| | | | SVN-Revision: 29551
* ar71xx: allow to attach the internal switch for AR934xGabor Juhos2011-12-151-0/+2
| | | | SVN-Revision: 29550
* ar71xx: introduce ar71xx_switch_dataGabor Juhos2011-12-155-8/+20
| | | | SVN-Revision: 29549
* ar71xx: build images for TL-WR741N/ND v2Gabor Juhos2011-12-151-0/+1
| | | | SVN-Revision: 29548
* ar71x: use raw squashfs images for TP-Link boardsGabor Juhos2011-12-151-20/+20
| | | | SVN-Revision: 29547
* ar71xx: create a template for using unpadded squashfs imagesGabor Juhos2011-12-151-1/+12
| | | | SVN-Revision: 29546
* ar71xx: put squash image right after the kernel on TP-Link boardsGabor Juhos2011-12-151-4/+12
| | | | SVN-Revision: 29545
* ar71xx: tplinkpart: allow to detect JFFS2 as wellGabor Juhos2011-12-151-3/+4
| | | | SVN-Revision: 29543
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 14:25:44 +0000