aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
...
* layerscape: support ubifs rootfsYangbo Lu2018-02-133-10/+37
| | | | | | | | | Some layerscape devices (ls1012ardb/ls1012afrdm/ls1046ardb/ls1088ardb) were using ext4 rootfs because there were issues using squashfs. This patch is to drop using ext4 rootfs and use ubifs rootfs instead which is more proper for SPI-NOR flash. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: remove USB configs for 64-bitYangbo Lu2018-02-131-46/+2
| | | | | | | Removed USB configs for 64-bit device since they're already in kmod package. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: remove USB and TI specific configs for 32-bitYangbo Lu2018-02-131-155/+2
| | | | | | | | This patch is to remove USB configs for 32-bit device since they're already in kmod package. Also removed TI platform specific configs. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update patches-4.9 to LSDK1712Yangbo Lu2018-02-1333-2062/+5557
| | | | | | | | | | | | | Patches changes - Updated patches-4.9 to NXP LSDK1712 linux-4.9. - Merged changes of patch 303 into integrated patch 201. - Split changes of patch 706 into dpaa part and dpaa2 part, and merged these changes into integrated patches 701 and 705. - Removed patch 819 since ehci-fsl driver could be compiled now. - Refreshed these patches. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update build guide in READMEYangbo Lu2018-02-131-0/+4
| | | | | | | Added package feeds updating and installing in build guide of README. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* ar71xx: add support for TP-Link RE355Henryk Heisig2018-02-1314-5/+99
| | | | | | | | | | | | | | | | | | | | | | | | This device is identical as TP-Link RE450 RE355 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9558+QCA9880. Specification: 720/600/200 MHz (CPU/DDR/AHB) 64/128 MB of RAM (DDR2) 8 MB of FLASH (SPI NOR) 3T3R 2.4 GHz 3T3R 5 GHz 1x 10/100/1000 Mbps Ethernet 7x LED, 3x button UART header on PCB Flash instruction: Web: Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* brcm63xx: switch to kernel 4.9Jonas Gorski2018-02-121-1/+1
| | | | | | Now that we have support for it, let's switch to kernel 4.9. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar7: switch to kernel 4.9Jonas Gorski2018-02-121-1/+1
| | | | | | | With generic run tested and ac49x compile tested, and no complaints so far, let's switch to 4.9. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar7: fix ac49x compilation with 4.9Jonas Gorski2018-02-121-1/+1
| | | | | | | | This will introduce a warning on 3.18, but fixes an error when compiling for 4.9. Fixes: cf9e0a59aabd ("ar7: add kernel 4.9 support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* Revert "mediatek: activate fpu feature flag"John Crispin2018-02-121-1/+1
| | | | | | | | This reverts commit 3594447a7d0398c55ea78f658b52b7d8084ae9f9. This causes the userland to not come up properly Signed-off-by: John Crispin <john@phrozen.org>
* mvebu: fix sysupgrade from 17.04 for clearfog proJonas Gorski2018-02-111-0/+1
| | | | | | | | | When clearfog was renamed to clearfog pro, it broke sysupgrade from 17.04 as the new images now get rejected as incompatible. Fix this by adding the legacy boardname to the compatible devices. Fixes: ec4a8c6dee81 ("mvebu: ClearFog renamed upstream to ClearFog Pro") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add kernel 4.14 supportJonas Gorski2018-02-11193-0/+23023
| | | | | | | Add support for kernel 4.14. Increases compressed kernel size by ~64k compared to 4.9. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add kernel 4.9 supportJonas Gorski2018-02-11204-0/+23683
| | | | | | | | Add support for kernel 4.9 based on the more upstream comformant partition defintions. Increases compressed kernel size by ~95k compared to 4.4. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: switch to new partition layout specificationJonas Gorski2018-02-1187-863/+1407
| | | | | | | Now that we support parsing the expected upstream definition, update the dts files to it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: enhance dt partitions support to match upstream more closelyJonas Gorski2018-02-111-9/+19
| | | | | | | Partitions are supposed to be enclosed in an extra partitions node. Allow the bcm63xxpart parser to cope with that. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: backport latest bcm63xx_enet changes from upstreamJonas Gorski2018-02-1111-19/+201
| | | | | | No functional changes, just simple cleanups. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: fix ephy reset gpio lookupJonas Gorski2018-02-111-1/+1
| | | | | | | The lookup needs to be called just "reset" for the common code. Fixes: 054c0d4e3193 ("brcm63xx: backport mdio-bus reset gpio support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar71xx: add missing config symbol ATH79_MACH_CF_E375ACMatthias Schiffer2018-02-112-0/+2
| | | | | Fixes: bf66bb8c96 "ar71xx:add support for COMFAST CF-E375AC" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mediatek: activate fpu feature flagHauke Mehrtens2018-02-111-1/+1
| | | | | | | | | | | The arm CPUs uses in the supported Mediatket SoCs have a FPU accordingly to the datasheet, activate it also. The CPU subtype "neon-vfpv4" is selected, but the toolcahin generated for this SoC will still be compiled with soft float and not with the hard float ABI as we haven't the fpu feature flag set. If this toolchain is reused by other targets this will even affect other targets. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq-wifi: drop OpenMesh A42 board-2.binSven Eckelmann2018-02-111-1/+1
| | | | | | | | | | | The BDFs for OpenMesh A42 were upstreamed [1] to the ath10k-firmware repository and are now part of ath10k-firmware 2018-01-26. The ipq-wifi-openmesh_a42 package can now be dropped because OpenWrt already ships the QCA4019 board-2.bin from this version. [1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx:add support for COMFAST CF-E375ACDing Tengfei2018-02-1111-1/+139
| | | | | | | | | | | | | | | | | | | | | | | | COMFAST CF-E375AC is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563 + QCA9886 + QCA8337. Short specification: 2x 10/100/1000 Mbps Ethernet, with PoE support 128MB of RAM (DDR2) 16 MB of FLASH 3T3R 2.4 GHz, 802.11b/g/n 2T2R 5 GHz, 802.11ac/n/a, wave 2 built-in 5x 3 dBi antennas output power (max): 500 mW (27 dBm) 1x RGB LED, 1x button built-in watchdog chipset Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Ding Tengfei <dtf@comfast.cn>
* ar71xx: remove bs-partition ro-flag for UniFi ACDavid Bauer2018-02-111-1/+1
| | | | | | | | | | | | This removes the read-only flag from the bs (bootselect) partition on UniFi AC devices. This allows to correct the indicator from which partition the device is booting its kernel from. See also: - https://github.com/freifunk-gluon/gluon/issues/1301 - https://bugs.lede-project.org/index.php?do=details&task_id=662 Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for TP-Link Archer C50 v3Henryk Heisig2018-02-116-0/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C50 v3 is a router with 5-port FE switch and non-detachable antennas. It's based on MediaTek MT7628N+MT7612E. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 4x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 7x LED (GPIO-controlled*), 2x button, power switch * WAN LED in this devices is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. Flash instruction: The only way to flash LEDE image in ArcherC50v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt7628-ArcherC50v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: ArcherC20v4: use common TP-Link dtsi fileHenryk Heisig2018-02-111-72/+3
| | | | | | and remove common part from dts file. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: change the TP-Link dtsi filenameHenryk Heisig2018-02-114-3/+3
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* kernel: mtdsplit: Add support for D-link JBOOTPawel Dembicki2018-02-117-0/+287
| | | | | | | | | The D-Link devices with JBOOT bootloader use their own kernel image header (stag + sch2 headers). This driver find jImage header and set rootfs start after kernel file. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ipq806x: mark AVM FB4040 switchport as untaggedDavid Bauer2018-02-111-1/+1
| | | | | | | | This commit marks the CPUs switchport explicit as untagged. Otherwise, an eth0.1 interface is created and the devices LAN-ports are not working. Signed-off-by: David Bauer <mail@david-bauer.net>
* x86: add preinit hook to reload microcodeZoltan HERPAI2018-02-111-0/+10
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* x86: enable microcode loading for Intel and AMDZoltan HERPAI2018-02-112-2/+8
| | | | | | Enable for 4.9 and 4.14. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ar71xx: Orders the names of the devices alphabetically.Arne Zachlod2018-02-113-176/+176
| | | | Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
* imx6: use DTS_DIR at image build codeAdrià Llaudet2018-02-101-1/+1
| | | | | | | | | Use "$(DTS_DIR)", defined at include/image.mk, instead of "$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts" in order to generalize and allow a better Device/* device-tree parameterization (i.e. DEVICE_DTS_DIR and DTS_DIR). Signed-off-by: Adrià Llaudet <adria.llaudet@gmail.com>
* archs38: bump kernel to 4.14.Evgeniy Didin2018-02-103-26/+28
| | | | | | | | | Update Linux kernel version from 4.9 to 4.14 for archs38. config-4.14 was simply regenerated with "make kernel_menuconfig". Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org>
* kernel: backport fix undefined abortEvgeniy Didin2018-02-102-0/+125
| | | | | | | | | | | | | | | | | | | While building mpi.ko module with stable Linux v4.14.14 an error occured: >ERROR: "abort" [lib/mpi/mpi.ko] undefined! In upstream Linux 4.15 this issue is fixed: Commit 7c2c11b208be ("arch: define weak abort()") https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7c2c11b208be09c156573fc0076b7b3646e05219 Commit dc8635b78cd8 ("kernel/exit.c: export abort() to modules") https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=dc8635b78cd8669c37e230058d18c33af7451ab1 So lets add backport patches until these fixes are not applied in stable version. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> CC: John Crispin <john@phrozen.org> CC: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: rename CONFIG_TRACE_ENUM_MAP_FILE to CONFIG_TRACE_EVAL_MAP_FILEHauke Mehrtens2018-02-101-1/+1
| | | | | | | | This config option was renamed in upstream Linux commit 681bec0367 ("tracing: Rename update the enum_map file") Reported-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ixp4xx: remove linux 4.4 supportFelix Fietkau2018-02-0942-9726/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: switch to kernel 4.14Stijn Tintel2018-02-081-1/+1
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.14 to 4.14.18Stijn Tintel2018-02-088-99/+28
| | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: - apm821xx/010-crypto-gcm-add-GCM-IV-size-constant.patch - backport/040-crypto-fix-typo-in-KPP-dependency-of-CRYPTO_ECDH.patch Remove pending-4.14/650-pppoe_header_pad.patch, it is superseded by upstream commit d32e5740001972c1bb193dd60af02721d047a17e. Update patch that no longer applies: hack/204-module_strip.patch Compile-tested: octeon, x86/64. Runtime-tested: octeon, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: various fixes for zbt-we1226Daniel Golle2018-02-067-18/+15
| | | | | | | | | | | Convert userspace code to use generic device-tree compatible board detection method. Users of the existing code will have to use sysupgrade -F once to switch to the new generic board naming. Properly setup pinctrl fixing the switch port LEDs. Fixes commit 9c4fe103cb (ramips: add support for ZBT-WE1226) Reported-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: fix forwarding locally generated packages in bridge isolation patchDaniel Danzberger2018-02-052-2/+2
| | | | | | | | | Locally generated packets weren't forwarded to the isolated interfaces in a bridge. Isolation should only prevent the flooding of incomming packets to other interfaces in the bridge. Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: use napi_alloc_frag and skb_free_fragFelix Fietkau2018-02-051-4/+4
| | | | | | Slightly improves rx performance Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: improve NAPI polling to increase GRO batch sizeFelix Fietkau2018-02-051-16/+13
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: use global timestamp for hang checkFelix Fietkau2018-02-052-6/+7
| | | | | | | Shrink the size of struct ag71xx_buf to 8 bytes, which improves cache footprint Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: only access device stats in tx handler if packets were processedFelix Fietkau2018-02-051-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: allocate rx/tx descriptor/buffers in one chunkFelix Fietkau2018-02-051-47/+38
| | | | | | Reduces false sharing due to cache aliases Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ag71xx: Reorder ag71xx struct members for better cache performanceRosen Penev2018-02-051-10/+17
| | | | | | | | | | | | | | | Qualcomm claims this improves the D-cache footprint. Origina commit message below: From: Ben Menchaca <ben.menchaca@qca.qualcomm.com> Date: Fri, 7 Jun 2013 10:57:28 -0500 Subject: [ag71xx] cluster/align structs for cache perf Cluster the frequently used, per-packet structures in ag71xx near to each other, and cacheline-align them. Some other re-ordering occurred to move "warmer" structures near the per-packet structures. Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: replace uses of OpenWrt with $(VERSION_DIST)Felix Fietkau2018-02-059-20/+20
| | | | | | This makes the distribution name more configurable. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: /lib/ar71xx.sh: add model detection for TP-Link TL-WR810NMatthias Schiffer2018-02-031-0/+3
| | | | | | Properly report the revision in /tmp/sysinfo/model. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx-generic: enable ATH79_MACH_TL_WR841N_V8 machineMatthias Schiffer2018-01-311-0/+1
| | | | | | | | | This machfile also contains the code for the TL-WR842N/ND v2, which is in ar71xx-generic and not in ar71xx-tiny. Fixes: 0cd5e85e7a "ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* build: add config option KERNEL_MIPS_FPU_EMULATORYousong Zhou2018-01-292-2/+0
| | | | | | | To make it more accessible for nodejs users to configure and run a build on mips target lacking hardware fpu Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: add ew-balin platform from Embedded WirelessCatrinel Catrinescu2018-01-2512-0/+148
| | | | | | | | | | | | | | | | | | | Add the Embedded Wireless "Balin" platform SoC: QCA AR9344 or AR9350 RAM: DDR2-RAM 64MBytes Flash: SPI-NOR 16MBytes WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n Ethernet: 3 x 10/100 Mb/s USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up PCI-Express: 1 x lane PCIe 1.2 UART: 1 x Normal, 1 x High-Speed JTAG: 1 x EJTAG GPIO: 10 x Input/Output multiplexed The module comes already with the current vanilla OpenWrt firmware. To update, use "sysupgrade" image directly in vendor firmware. Signed-off-by: Catrinel Catrinescu <cc@80211.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 13:07:07 +0000