aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
...
* ath79: add support for devolo WiFi pro 1750xDavid Bauer2019-07-144-1/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) WiFi2: QCA9558 3T3R WiFi5: QCA9880 3T3R BTN: 1x Reset LED: 1x LED Power (non-controllable) 1x LED Status (internal) 1x LED LAN (controlled by PHY) 1x LED WLAN BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to external-LED header. Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net>
* gemini: Stop enforcing command lineLinus Walleij2019-07-142-4/+0
| | | | | | | | | | | | The command line enforced by the kernel is harmful, we want to use the command line passed from the device tree. This is especially important for the SQ201, Teltonika RUT and WBD111 which has a console set to 115200n8 and not 19200n8 like all the others, so their consoles will be confusingly changing baudrate between boot loader and kernel. The setting in the device tree corresponds to what the boot loader is using. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* brcm2708: Add Raspberry Pi 4 supportÁlvaro Fernández Rojas2019-07-145-16/+41
| | | | | | | - Support added to bcm2709 subtarget (32 bit). - 64 bit kernel still requires many hacks on RPi 4B. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: switch to linux-firmware SDIO NVRAMÁlvaro Fernández Rojas2019-07-141-4/+17
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: add linux 4.19 supportÁlvaro Fernández Rojas2019-07-14722-1833/+381767
| | | | | | Boot tested on Raspberry Pi B+ (BCM2708) and Raspberry Pi 2 (BCM2709) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: add support for ASUS RT-AC57UDavid Bauer2019-07-113-4/+163
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: MediaTek MT7621AT RAM: 128M (Winbond W631GG6KB-15) FLASH: 16MB (Spansion S25FL128SA) WiFi: MediaTek MT7603EN bgn 2SS WiFi: MediaTek MT7612EN nac 2SS BTN: Reset - WPS LED: - Power - LAN {1-4} - WAN - WiFi 2.4 GHz - WiFi 5 GHz - USB UART: UART is present next to the Power LED. TX - RX - GND - 3V3 / 57600-8N1 3V3 is the nearest one to the Power LED. Installation ------------ Via TFTP: 1. Set your computers IP-Address to 192.168.1.75. 2. Power up the Router with the Reset button pressed. 3. Release the Reset button after 5 seconds. 4. Upload OpenWRT sysupgrade image via TFTP: > tftp -4 -v -m binary 192.168.1.1 -c put <IMAGE> Via SSH: Note: User/password for SSH is identical with the one used in the Web-interface. 1. Complete the initial setup wizard. 2. Activate SSH under "Administration" -> "System". 3. Transfer the OpenWrt sysupgrade image via scp: > scp owrt.bin admin@192.168.1.1:/tmp 4. Connect via SSH to the router. > ssh admin@192.168.1.1 5. Write the OpenWrt image to flash. > mtd-write -i /tmp/owrt.bin -d linux 6. Reboot the router > reboot Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: fix mqmaker witi case in fixup-mac-addressChuanhong Guo2019-07-111-2/+1
| | | | | | | This commit fixes a forgotten case in previous commit. Fixes: 087e14ab59 ("ramips: mt7621: merge two variants of MQmaker WiTi together") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: merge two variants of MQmaker WiTi togetherChuanhong Guo2019-07-115-34/+5
| | | | | | | Since we can auto-detect memory now, we don't need 2 dts for two memory variants. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: dts: drop memory nodesChuanhong Guo2019-07-1188-441/+0
| | | | | | | | mt7621 and mt7628 now have the ability to detect memory size automatically. Drop memory nodes and let kernel determine memory size. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: add support for memory detectionChuanhong Guo2019-07-111-0/+125
| | | | | | | | | | | | | | | | | | | | | mt7621 has the following memory map: 0x0-0x1c000000: lower 448m memory 0x1c000000-0x2000000: peripheral registers 0x20000000-0x2400000: higher 64m memory detect_memory_region in arch/mips/kernel/setup.c only add the first memory region and isn't suitable for 512m memory detection because it may accidentally read the memory area for peripheral registers. This commit adds memory detection capability for mt7621: 1. add the highmem area when 512m is detected. 2. guard memcmp from accessing peripheral registers: This only happens when some weird user decided to change kernel load address to 256m or higher address. Since this is a quite unusual case, we just skip 512m testing and return 256m as memory size. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: fix bogus MTK_SOC (typo)Daniel Golle2019-07-102-1/+1
| | | | | | | | | | Belkin F7C027 is clearly Rt5350 SoC, as shown on internal photographs filed for FCC approval[1]. [1]: https://fcc.io/K7S/F7C027 Fixes commit 3b0264eddbc Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: Sort all subtarget MakefilesAdrian Schmutzler2019-07-106-1522/+1511
| | | | | | | | | This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: Reapply sorting to board.d filesAdrian Schmutzler2019-07-103-521/+521
| | | | | | | | This patch is cosmetical: It only applies sorting based on device names, whereas renames already took place in earlier patches. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: Remove base-files/lib/ramips.shAdrian Schmutzler2019-07-103-36/+0
| | | | | | | | | | Having converted the target to use device compatible, ramips.sh is obsolete now. The only remaining entry for the mt7688 evaluation board seems to be orphaned. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/rt305x: Name DTS files based on schemeAdrian Schmutzler2019-07-10116-126/+126
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/rt288x,rt3883: Name DTS files based on schemeAdrian Schmutzler2019-07-1022-21/+21
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/mt76x8: Name DTS files based on schemeAdrian Schmutzler2019-07-1055-66/+55
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/mt7621: Name DTS files based on schemeAdrian Schmutzler2019-07-1065-77/+74
| | | | | | | | As introduced with ath79, DTS files for ramips will now be labelled soc_vendor_device.dts(i). With this change, DTS files can be selected automatically without further manual links. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/mt7620: Name DTS files based on schemeAdrian Schmutzler2019-07-1099-107/+104
| | | | | | | | As introduced with ath79, DTS files for ramips will now be labelled soc_vendor_device.dts(i). With this change, DTS files can be selected automatically without further manual links. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: Derive DTS name from device name in MakefileAdrian Schmutzler2019-07-101-1/+2
| | | | | | | | | | | | | | | This will automatically derive the DTS name as in ath79 and thus makes specifying DTS for every device obsolete. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> --- This patch only introduces the mechanism and is then followed by commits with renames and Makefile adjustments per subtarget. Eventually, those can be all squashed into a single commit or left as they are to enhance overview.
* ramips/rt305x: Synchronize Makefiles with DTS compatibleAdrian Schmutzler2019-07-1012-668/+460
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatibleAdrian Schmutzler2019-07-106-111/+79
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/mt76x8: Synchronize Makefiles with DTS compatibleAdrian Schmutzler2019-07-105-130/+91
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/mt7621: Synchronize Makefiles with DTS compatibleAdrian Schmutzler2019-07-108-191/+135
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/mt7620: Synchronize Makefiles with DTS compatibleAdrian Schmutzler2019-07-1010-470/+327
| | | | | | | | | | | | | | | This will "rename" devices in Makefiles to the pattern used in DTS compatible. This will systematize naming of devices enormously. As device names are used to for default SUPPORTED_DEVICES entries, we need to adjust the source for /tmp/sysinfo/board_name, too. So remove relevant entries from base-files/lib/ramips.sh and use device compatible for that. Despite that, base-files are updated, too. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: Improve compatible for TP-Link Archer devicesAdrian Schmutzler2019-07-1013-30/+35
| | | | | | | | Include "Archer" in compatible as it is part of the device name. Update Makefile device names where necessary to match compatible. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix missing DEVICE_VENDOR for some devicesChen Minqiang2019-07-102-0/+2
| | | | Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* ramips: add missing DEVICE_VENDORDaniel Golle2019-07-101-1/+1
| | | | | Fixes commit ee66fe4ea9a6f5e3f47a063f850bac57e1fb411a Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: convert to multi-variable device titleLuis Araneda2019-07-103-33/+67
| | | | | | | Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* ipq40xx: convert to multi-variable device titleLuis Araneda2019-07-101-24/+55
| | | | | | Additionally, fix some vendor and board names Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* kirkwood: split up DEVICE_TITLEMoritz Warning2019-07-101-13/+27
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* ath25: split up DEVICE_TITLEMoritz Warning2019-07-101-5/+10
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* oxnas: convert DEVICE_TITLE to new variablesDaniel Golle2019-07-102-8/+13
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: cherry pick patch removing __linux__ checkFredrik Olofsson2019-07-102-0/+94
| | | | | | | | | | This is already included in newer upstream. Needed to build BPF programs using the MIPS kernel include files. Without this patch, clang fails with "#error Use a Linux compiler or give up." in sgidefs.h when building BPF programs. Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
* ath79: Fix whitespace errors in 11-ath10k-caldataAdrian Schmutzler2019-07-091-2/+2
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rb532: Fix missing DEVICE_TITLEAdrian Schmutzler2019-07-091-0/+1
| | | | | | | | | | This fixes the collection of target info during build, where the device title for rb532/nand is just empty: tmp/.config-target.in:44925:warning: leading whitespace ignored tmp/.config-target.in:123738:warning: leading whitespace ignored tmp/.config-target.in:123786:warning: leading whitespace ignored Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 4.19 to 4.19.57Koen Vandeputte2019-07-093-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.132Koen Vandeputte2019-07-094-7/+7
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: x86: enable NVME support for 64 bit targetLucian Cristian2019-07-092-0/+3
| | | | | | | | Newer motherboards support NVMe U.2 connectors but also NVMe storage can be used on add-on pcie adapters. Enable kernel driver on x86 for now so the NVMe flash storage can be used Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTBChuanhong Guo2019-07-089-86/+15
| | | | | | | | | | | | | | | | | Upstream kernel added support for RAW_APPENDED_DTB on ralink arch in the following commit: 02564fc89d3d ("ralink: Introduce fw_passed_dtb to arch/mips/ralink") Use upstream solution and get rid of our OWRTDTB hack. This commit set DEVICE_DTS to $$(DTS) instead of replacing DTS with DEVICE_DTS in device profile because DTS variable will be dropped in later commits. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [Tested on mt7621/mt76x8] Tested-by: Chuanhong Guo <gch981213@gmail.com> [Tested on rt305x/mt7620] Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: Add missing IMAGE_SIZE for Etactica EG200Adrian Schmutzler2019-07-081-0/+1
| | | | | | | The Etactica EG200 is the only device in ath79 despite nand target that lacks IMAGE_SIZE. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* zynq: convert to multi-variable device titleLuis Araneda2019-07-081-4/+8
| | | | | | | Use the newly introduced variables to better differentiate between vendor, model and revision Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* kmod-sched-cake: drop out of tree package, use kernel versionKevin Darbyshire-Bryant2019-07-084-0/+487
| | | | | | | | | | | | | | CAKE made it to kernel 4.19 and since OpenWrt now at kernel 4.19 we can drop the out of tree cake package in base repository. Add kmod-sched-cake to netsupport so package dependencies are still met. Similarly CAKE is retained as an optional qdisc module to avoid base scheduler package size implications. Backport upstream patches from k5.1 to address some small bugs and support fwmark usage. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* bcm53xx: sysupgrade: call nand_do_upgrade() from platform_do_upgrade()Rafał Miłecki2019-07-081-17/+12
| | | | | | | | | | | Calling nand_do_upgrade() from platform_pre_upgrade() was obsoleted in the commit 30f61a34b4cf ("base-files: always use staged sysupgrade"). This change brings bcm53xx in sync with other targets and allows dropping backward compatibility code. It shouldn't change any user visible behavior. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: Add missing includes mtdsplit_*.cHauke Mehrtens2019-07-079-0/+9
| | | | | | | | | | | This fixes the following compile problem with kernel 4.9 on lantiq: drivers/mtd/mtdsplit/mtdsplit_uimage.c:244:34: error: array type has incomplete element type 'struct of_device_id' static const struct of_device_id mtdsplit_uimage_of_match_table[] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/mtdsplit/mtdsplit_uimage.c:245:4: error: field name not in record or union initializer { .compatible = "denx,uimage" }, Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Fix MIPS bounds check virt_addr_validHauke Mehrtens2019-07-072-0/+66
| | | | | | | | This is pending to get into the upstream kernel. This fixes a bug in the upstream kernel which was added to stable some time ago. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: increase kernel partition size for CPE610v1Andrew Cameron2019-07-072-4/+7
| | | | | | | | | Increase the Kernel partition to address the issue discussed here https://forum.openwrt.org/t/cpe610-v1-sysupgrade-bin-missing-too-big/39637/5 Switch Back to the okli Loader to support increased partition size Signed-off-by: Andrew Cameron <apcameron@softhome.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [add <> for e-mail]
* gemini: Add SL93512r missing ImageInfo fileLinus Walleij2019-07-071-0/+18
| | | | | | | | | | | Somehow I missed to add the magical image cooking file for the SL93512r. Fix it. Fixes: 18e2053becb8 ("gemini: Add StorLink SL93512r images") Reported-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added Fixes, changed subject]
* gemini: Fix device name for StorLink SL93512rAdrian Schmutzler2019-07-071-1/+1
| | | | | | | | | This has been reported by Chen Minqiang (@ptpt52). Reported-by: Chen Minqiang <ptpt52@gmail.com> Fixes: 18e2053becb8 ("gemini: Add StorLink SL93512r images") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [Added tags]
* ramips: Fix compatible for YUKAI Engineering BOCCOAdrian Schmutzler2019-07-071-1/+1
| | | | | | Looks like an undetected copy/paste error. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 12:24:40 +0000