aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* treewide: Disable building 32M RAM devicesFelix Baumann2023-05-2116-0/+124
| | | | | | | | Following deprecation notice[1] in 21.02, disable targets with 32M of RAM [1] https://openwrt.org/supported_devices/864_warning Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* treewide: Disable building 16M RAM devicesFelix Baumann2023-05-212-0/+29
| | | | | | | | Following deprecation notice[1] in 21.02, disable targets with 16M of RAM [1] https://openwrt.org/supported_devices/864_warning Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* ramips: mt7621: fix Xiaomi Router 3G/Pro LEDsDENG Qingfang2023-05-202-20/+53
| | | | | | | | | | The PHY name has been changed to "mt7530-0" since IRQ support was added to MT7530 driver. Fixes: f9cfe7af1f1f ("kernel: backport MT7530 IRQ support") Signed-off-by: DENG Qingfang <dqfext@gmail.com> (node names, added color, function+function-enumerator properties) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: base-files add support for Sophos 135r3/135r3wStan Grishin2023-05-202-0/+11
| | | | | | | | | | | | | | The Sophos SG/XG-135 revision 3 has odd numbering of eth ports where the WAN port (as marked on the case) is: `eth6` and `eth0`, `eth1`, `eth2`, `eth3`, `eth5`, `eth7`, `eth8` are LAN ports. Port `eth4` seems to be the SFP port. Also add the missing LED definition for supported Sophos devices. Original discussion at: https://forum.openwrt.org/t/openwrt-on-revision-3-of-sophos-desktop-appliances/152912 Signed-off-by: Stan Grishin <stangri@melmac.ca>
* kirkwood: add support for Iomega Storcenter ix4-200dSander van Deijck2023-05-203-0/+223
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Iomega Storcenter ix4-200d is a four-bay SATA NAS powered by a Marvell Kirkwood SoC clocked at 1.2GHz. It has 512MB of RAM and 32MB of flash memory, 3x USB 2.0 and 2x 1Gbit/s NIC Specification: - SoC: Marvell Kirkwood 88F6281 - CPU/Speed: 1200Mhz - Flash size: 32 MiB - RAM: 512MB - LAN: 2x 1Gbit/s - 3x USB 2.0 Notes: - The blue drive LED is triggered by HDD activity, it can not be controlled via GPIO. - The LCD screen requires proprietary code and does not function at this time. - Due to a kernel-related issue with the Marvell 88SE6121 SATA controller, currently only trays numbered #3 and #4 work, #1 and #2 do not. [1] Serial pinout: CN4 -------------- | 10 8 6 4 2 | | 9 7 5 3 1 | -------------- PIN 1 Mark (fat line) 1 = RXD 4 = TXD 6 = GND 9 = 3.3V (not necessary to connect) Installation instructions: 1. download initramfs-uImage and copy into tftp server 2. connect the tftp server to network port #1 3. access uboot environment with serial cable and run setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.2 tftpboot 0x00800000 [initramfs-uImage filename] bootm 0x00800000 4. connect to LAN on network port #2, log into openwrt and sysupgrade to install into flash [1] https://bugzilla.kernel.org/show_bug.cgi?id=216094 Signed-off-by: Sander van Deijck <sander@vandeijck.com> (aligned FROM from signed-off. LED+key rename, whitespace removal) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: remove obsolete kernel version switchesAleksander Jan Bajkowski2023-05-2012-154/+0
| | | | | | | This removes unneeded kernel version switches from the targets after kernel 5.10 has been dropped. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: net: add support for kernel tlsTiago Gaspar2023-05-201-0/+2
| | | | | | | | | | Add ktls (Kernel TLS) kmods to enable TLS support in kernel (allowing TLS offload when the network card supports it) Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com> (added disabled symbols) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: convert EZVIZ CS-W3-WD1200G-EUP to DSAChristian Lamparter2023-05-203-2/+38
| | | | | | Convert the repeater to DSA. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: fix 5GHz on QCA9886 variant of ZTE MF286Lech Perczak2023-05-202-4/+4
| | | | | | | | | | | Recently, a strange variant of ZTE MF286 was discovered, having QCA9886 radio instead of QCA9882 - like MF286A, but having MF286 flash layout and rest of hardware. To support both variants in one image, bind calibration data at offset 0x5000 both as "calibration" and "pre-calibration" nvmem-cells, so ath10k can load caldata for both at runtime. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: Add support for D-Link DIR-869-A1Jan Forman2023-05-204-1/+51
| | | | | | | | | | | | | | | | | | | | Specifications The D-Link EXO AC1750 (DIR-869) router released in 2016. It is powered by Qualcomm Atheros QCA9563 @ 750 MHz chipset, 64 MB RAM and 16 MB flash. 10/100/1000 Gigabit Ethernet WAN port Four 10/100/1000 Gigabit Ethernet LAN ports Power Button, Reset Button, WPS Button, Mode Switch Flashing 1. Upload factory.bin via D-link web interface (Management/Upgrade). Revert to stock Upload original firmware via OpenWrt sysupgrade interface. Debricking D-Link Recovery GUI (192.168.0.1) Signed-off-by: Jan Forman <forman.jan96@gmail.com>
* ath79: Convert calibration data to nvmemJan Forman2023-05-203-7/+35
| | | | | | | | | For D-link DIR-859 and DIR-869 Replace the mtd-cal-data by an nvmem-cell. Add the PCIe node for the ath10k radio to the devicetree. Thanks to DragonBlue for this patch Signed-off-by: Jan Forman <jforman@tuta.io>
* ath79: Create shared dtsi for DIR-859Jan Forman2023-05-202-112/+119
| | | | | | Create a shared dtsi for the dir-859 and similarly device, it similarly as it done for the dir-842. Signed-off-by: Jan Forman <jforman@tuta.io>
* ath79: Replace reset-button for DIR-859Jan Forman2023-05-201-11/+2
| | | | | | | gpio-export for the switch reset pin replaced with a reset pin definition for the driver, within the phy node. Signed-off-by: Jan Forman <forman.jan96@gmail.com> Tested-By: Sebastian Schaper <openwrt@sebastianschaper.net>
* ramips: fix build error on Airlink AR670WShiji Yang2023-05-191-1/+1
| | | | | | | | | | The 'KERNEL' is not referenced by other objects, so double '$$' will cause shell unable to parse the variable 'BLOCKSIZE': dd ... bs=$(BLOCKSIZE) conv=sync bash: line 1: BLOCKSIZE: command not found Fixes: 09a0efbe83(ramips: set default BLOCKSIZE to 64k for nor flash devices) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath25: Replace fall through comment with fallthrough;Hauke Mehrtens2023-05-191-3/+3
| | | | | | | | Replace the fall through comment with fallthrough; in the ar2315 flash driver. This fixes a compile warning. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath25: Remove virt_to_phys() from Ethernet driverHauke Mehrtens2023-05-192-10/+8
| | | | | | | | Instead of defining an own virt_to_phys() use the version from the generic MIPS arch code which does the same. This fixes a compile warning. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: fix append-gl-metadata when running in buildbotDaniel Golle2023-05-191-2/+5
| | | | | | | Use same logic as in append-metadata so build doesn't fail in case of missing build-key (it was previously failing on the buildbot runners). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: fix rebooting after 5.15.111Robert Marko2023-05-181-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernel 5.15.111 includes backport of commit ("firmware: qcom_scm: Clear download bit during reboot") which is causing reboot on ipq40xx to stop working, more precisely the board will hang after reboot is called with: root@OpenWrt:/# reboot root@OpenWrt:/# [ 76.473541] device lan1 left promiscuous mode [ 76.474204] br-lan: port 1(lan1) entered disabled state [ 76.527975] device lan2 left promiscuous mode [ 76.530301] br-lan: port 2(lan2) entered disabled state [ 76.579376] device lan3 left promiscuous mode [ 76.581698] br-lan: port 3(lan3) entered disabled state [ 76.638434] device lan4 left promiscuous mode [ 76.638777] br-lan: port 4(lan4) entered disabled state [ 76.978489] qca8k-ipq4019 c000000.switch wan: Link is Down [ 76.978883] device eth0 left promiscuous mode [ 76.987077] ipqess-edma c080000.ethernet eth0: Link is Down [ Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00123 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000010 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1339 - bootable_media_detect_entry, Start B - 1679 - bootable_media_detect_success, Start B - 1693 - elf_loader_entry, Start B - 5076 - auth_hash_seg_entry, Start B - 7223 - auth_hash_seg_exit, Start B - 578349 - elf_segs_hash_verify_entry, Start B - 696356 - PBL, End B - 696380 - SBL1, Start B - 787236 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 788701 - boot_flash_init, Start D - 52782 - boot_flash_init, Delta B - 845625 - boot_config_data_table_init, Start D - 3836 - boot_config_data_table_init, Delta - (419 Bytes) B - 852841 - clock_init, Start D - 7566 - clock_init, Delta B - 864883 - CDT version:2,Platform ID:9,Major ID:0,Minor ID:0,Subtype:64 B - 868413 - sbl1_ddr_set_params, Start B - 873402 - cpr_init, Start D - 2 - cpr_init, Delta B - 877842 - Pre_DDR_clock_init, Start D - 4 - Pre_DDR_clock_init, Delta D - 13234 - sbl1_ddr_set_params, Delta B - 891155 - pm_driver_init, Start D - 2 - pm_driver_init, Delta B - 909105 - Image Load, Start B - 1030210 - Boot error ocuured!. Error code: 303d So, until a proper fix is found, lets revert the culprit patch to have reboot working again. Fixes: 228e0e10398b ("kernel: bump 5.15 to 5.15.111") Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: bump 5.15 to 5.15.112John Audia2023-05-186-15/+15
| | | | | | | | | | | | | | | Manually adjusted before running quilt due to new location in tree: backport-5.15/780-v5.16-bus-mhi-pci_generic-Introduce-Sierra-EM919X-support.patch backport-5.15/781-v6.1-bus-mhi-host-always-print-detected-modem-name.patch pending-5.15/790-bus-mhi-core-add-SBL-state-callback.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* rockchip: add NanoPi R2C supportTianling Shen2023-05-186-4/+105
| | | | | | | The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC chip changed from rtl8211e to yt8521s, and otherwise identical to R2S. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: backport Motorcomm YT8521/YT8531 supportTianling Shen2023-05-1817-5/+2915
| | | | | | It will be used on NanoPi R2C and OrangePi R1 Plus LTS board. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: move UBOOT_DEVICE_NAME to defaultTianling Shen2023-05-182-3/+1
| | | | | | Simplify variable usage. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: merge bootscriptTianling Shen2023-05-184-18/+12
| | | | | | | | The bootscript for nanopi r2s/r4s only changes the serial address, so make it auto detected in mmc bootscript rather than creating more (redudant) files. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* ipq806x: remove dangling ipq-wifi-edgecore_ecw5410Christian Lamparter2023-05-181-2/+1
| | | | | | | should have been part of the ipq-wifi update. Fixes: 8217f02a1c5e ("ipq-wifi: drop upstreamed board-2.bin") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* imx: image: ventana: add blkdev compressed disk imageTim Harvey2023-05-181-1/+25
| | | | | | | | | | | Add a ventana-img.gz compressed disk image to support squashfs+ext4 on a block storage device such as USB/MMC/SATA. The Ventana bootloader expects the bootscript to be boot/6x_bootscript-ventana therefore we must create a bootfs that matches this. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: image: ventana: use squashfs rootfs for non NAND devicesTim Harvey2023-05-181-2/+2
| | | | | | | In order to support squashfs+ext4 define rootfstype=squashfs and use P2 as P1 is boot filesystem. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ramips: add basic common recipe for nand flash devicesShiji Yang2023-05-181-207/+47
| | | | | | | | These same codes are repeated for many devices now, it's better to move them to shared definition. This commit also add the missing KERNEL_SIZE of the ZyXEL NR7101 and ZyXEL LTE3301-PLUS. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: set default BLOCKSIZE to 64k for nor flash devicesShiji Yang2023-05-187-74/+2
| | | | | | | | | In kernel 5.15, the default erase sector size of the nor flash has been switched from 4k to 64k. This may cause the configuration not be preserved across upgrades. To avoid this issue, change the default BLOCKSIZE to 64k. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: enable variable sector size erasure for all subtargetShiji Yang2023-05-184-2/+4
| | | | | | | | | Make use of minor sector size (4k) on supported flash chips to improve spi read/write performance. Tested on ramips/mt7628: Motorola MWR03 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ipq-wifi: drop upstreamed board-2.binChristian Lamparter2023-05-182-21/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BDFs for the: Aruba AP-365 Devolo Magic 2 WiFi next Edgecore ECW5410 Edgecore OAP100 Extreme Networks WS-AP3915i GL.iNet GL-A1300 GL.iNet GL-AP1300 GL.iNet GL-S1300 Linksys EA8300 Linksys WHW03v2 Nokia Wi4A AC400i P&W R619AC Pakedge WR-1 Qxwlan E2600AC C1 Sony NCP-HG100/Cellular Teltonika RUTX10 ZTE MF18A were upstreamed to the ath10k-firmware repository and landed in linux-firmware.git. Furthermore the BDFs for the: 8devices Habanero 8devices Jalapeno Qxwlan E2600AC C2 have been updated. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mvebu: use PHY LED trigger for speed LEDs on FortiGate 50EINAGAKI Hiroshi2023-05-182-9/+12
| | | | | | | | | | | | | Use <mdio>:<addr>:<speed> trigger instead of netdev(link) trigger for Fortinet FortiGate 50E, to indicate link speed on the each phys. 1000 Mbps: Green 100 Mbps : Amber 10 Mbps : (turn off) Fixes: 102dc5a62506 ("mvebu: add support for Fortinet FortiGate 50E") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mvebu: cortexa9: enable Ethernet PHY LED triggerINAGAKI Hiroshi2023-05-181-0/+1
| | | | | | | To use <mdio>:<addr>:<speed> trigger for LEDs, enable PHY LED trigger (CONFIG_LED_TRIGGER_PHY). Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* octeontx: kernel: add USB storage boot supportTim Harvey2023-05-181-0/+2
| | | | | | | | | Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass Storage device. This increases the kernel Image by 66KiB Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: kernel: add USB storage boot supportTim Harvey2023-05-181-0/+2
| | | | | | | | | Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass Storage device. This adds 23KiB to the compressed kernel size Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* nu801: add kmod-leds-uleds to MR26 + MR18Christian Lamparter2023-05-182-2/+2
| | | | | | | | | | | | | | support for MR18 and MR26 was developped before the userspace nu801 was integrated with x86's MX100 into OpenWrt. The initial nu801 + kmod-leds-uleds caused build-bot errors. The solution that worked for the MX100 was to include the kmod-leds-uleds to the device platform module. Thankfully, the MR26 and MR18 can just add the uleds package to the DEVICE_PACKAGES variable. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: rename to D-Team Newifi D2 and Lenovo Newifi D1Arınç ÜNAL2023-05-183-6/+6
| | | | | | | Rename Newifi D2 to D-Team Newifi D2, and Newifi D1 to Lenovo Newifi D1. Let's not make naming exceptions because of marketing whims. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* ramips: add support for TOZED ZLT S12 PROArınç ÜNAL2023-05-184-0/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TOZED ZLT S12 PRO is an AC1200 router featuring 4 Ethernet ports with a TOZED TL70-C cellular modem which supports the NCM mode. The stock firmware does SIM locking on the modem by stopping dialing when a different PLMN is detected. This is not the case on OpenWrt. Specifications: - CPU: MediaTek MT7621AT - RAM: 256MB DDR3 - NOR Flash: MX25L12833FM2I 16MB SPI Flash - Wi-Fi 2.4Ghz: MT7603E - Wi-Fi 5Ghz: MT7612E - Switch: MT7530 4x 1Gbit Ports - WWAN: Unisoc SL8563 based TOZED TL70-C LTE CAT6 cellular modem - USB: 1x optional USB2.0 external port - Switches/Buttons: WPS, Reset, Power Switch - LEDs: Power, Wi-Fi, Data, Signal 1-5, Phone Installation and TFTP Recovery: - Connect to serial console. - Boot initramfs image by choosing option 1 when U-Boot prompts. - Install sysupgrade image via OpenWrt. Serial Pins: Located at the bottom right when looking from the front, right under the Reset/WPS buttons. The pinout from the left is: - RX - GND - TX Baudrate is 115200. When connecting from a powered off state, disconnect RX as it blocks the boot process. Link: http://www.sztozed.com/en/contents/58/84.html Co-developed-by: Andre Cruz <me@1conan.com> Signed-off-by: Andre Cruz <me@1conan.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* mediatek: remove left-over reference to make_gl_metadata.pyDaniel Golle2023-05-181-3/+1
| | | | | | | | When adding support for the GL.iNet GL-MT3000 a reference to the non-existent make_gl_metadata.py script was accidentally added. Remove it, flashing from vendor firmware also works fine without that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: Fix Wireless Frequencies for HYC-G920Muhammad AL-Qadhy2023-05-181-0/+2
| | | | | | Fix wireless frequencies to show correct wireless interfaces. Signed-off-by: Muhammad AL-Qadhy <m.ismael@gmail.com>
* mediatek: update patch add PWM support for MT7981Daniel Golle2023-05-181-119/+29
| | | | | | Update patch with version submitted upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for the GL.iNet GL-MT3000Daniel Golle2023-05-184-3/+295
| | | | | | | | | | | | | | | | | | | | | | The MT-3000 is a pocket-sized Wi-Fi 6 router based on MediaTek MT7981. Specification: - SoC: MediaTek MT7981B - CPU: 2x 1.3 GHz Cortex-A53 - Flash: 256 MiB Macronix SPI NAND - RAM: 512 MiB Nanya DDR4 - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN) - Ethernet: - 1x 10/100/1000 Mbps built-in PHY (LAN) - 1x 10/100/1000/2500 Mbps MaxLinear GPY211 PHY (WAN) - USB 3.0 port - Buttons: 1 button, 1 switch - LEDs: 1x light-blue, 1x warm-white - Serial console: internal 4-pin header, 115200 8n1 - PWM controlled fan with tacho - Power: 5 VDC, 3 A (USB Type-C) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Cudy WR3000 v1David Bauer2023-05-186-0/+318
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- MediaTek MT7981 WiSoC 256MB DDR3 RAM 16MB SPI-NOR (XMC XM25QH128C) MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5) UART: 115200 8N1 3.3V [LEDS] VCC-GND-RX-TX [ETH] Header is located below the heatsink Case ---- Unscrew the 4 bottom screws. Remove the top of the case by inserting a small screwdriver into the ventilation holes and lift the top cover. This works best by beginning near the ETH-ports. The top is clipped on the front near the LEDs with two plastic clips. The back has a single clip in the middle. Start at one of the back edges. MAC-Addresses ------------- 80:AF:CA:00:F9:C6 LAN 80:AF:CA:00:F9:C7 WAN 80:AF:CA:00:F9:C6 W2 82:AF:CA:30:F9:C6 W5 Installation ------------ 1. Connect to the serial port as described in the "Hardware" section. 2. Power on the device. Keep pressing the "0" key to enter the U-Boot shell. 3. Download the OpenWrt initramfs image. Place it on an TFTP server connected to the Cudy LAN ports. Make sure the server is reachable at 192.168.1.2. Rename the image to "cudy3000.bin" 4. Download and boot the OpenWrt initramfs image. $ tftpboot 0x46000000 cudy3000.bin; bootm 0x46000000 5. Transfer the OpenWrt sysupgrade image to the device using scp. Install with sysupgrade. Note: Cudy does not yet provide a image for disabling their signature-protection. This has happened in the past. Make sure to check the wiki for a possible easier installation method. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: fix typoDavid Bauer2023-05-181-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* bmips: improve kernel patchesÁlvaro Fernández Rojas2023-05-1714-185/+181
| | | | | | | Add missing patch headers and regenerate the ones that contain an obsolete patch header. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath79: add support for MikroTik RB951Ui-2HnDMichał Kępień2023-05-166-0/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MikroTik RB951Ui-2HnD is a wireless SOHO router that was previously supported by the ar71xx target, see commit d19b868b12 ("ar71xx: Add support for MikroTik RB951Ui-2HnD"). Specifications -------------- - SoC: Atheros AR9344 (600 MHz) - RAM: 128 MB (2x 64 MB) - Storage: 128 MB NAND flash (various manufacturers) - Ethernet: Atheros AR8229 switch, 5x 10/100 Mbit/s - 1x PoE in (port 1, 8-30 V input) - 1x PoE out (port 5, 500 mA output) - Wireless: Atheros AR9340 (802.11b/g/n) - USB: 2.0 (1A) - 9x LED: - 1x power (green, not configurable) - 1x user (green) - 5x FE ports (green) - 1x wireless (green) - 1x PoE out (red) - 1x button (restart) See https://mikrotik.com/product/RB951Ui-2HnD for more details. Flashing -------- TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedures at https://openwrt.org/toh/mikrotik/common. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* generic: mtk_eth_soc: don't crash if WO firmware is missingDaniel Golle2023-05-151-0/+28
| | | | | | | Import patch to prevent crashes in case WO firmware is missing on devices with only a single frontend (eg. MT7981+MT7976). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: add support for wireless offloading on MT7981Daniel Golle2023-05-152-1/+47
| | | | | | Load appropriate firmware for wireless offloading on MT7981. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: mikrotik: bump compat version for yafut imagesThibaut VARÈNE2023-05-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Following 5264296, Mirotik NAND devices now use yafut to flash the kernel on devices. This method is incompatible with the old-style "kernel2minor" flash mechanism. Even though NAND images were disabled in default build since 21.02, a user flashing a new-style image onto an old-style image would result in in a soft-brick[1]. In order to prevent such accidental mishap, especially as these device images will be reenabled in the upcoming release, bump the compat version. After the new image is flashed, the compat version can be updated: uci set system.@system[0].compat_version='1.1' uci commit [1] https://github.com/openwrt/openwrt/pull/12225#issuecomment-1517529262 Cc: Michał Kępień <openwrt@kempniu.pl> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Reviewed-by: Robert Marko <robimarko@gmail.com>
* bcm47xx: Refresh patchesHauke Mehrtens2023-05-141-1/+1
| | | | | | | | Refresh patches to make them cleanly apply. This problem was found by the github CI. Fixes: ecd9abc8c082 ("kernel: use upstream firmware patch for Broadcom's NVRAM") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport NVMEM patch for Broadcom's NVRAM MAC cellsRafał Miłecki2023-05-141-0/+77
| | | | | | | It has just been queued for the v6.5. It allows Ethernet drivers to read MACs from NVRAM using NVMEM interface. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-20 00:12:42 +0000