aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* rockchip: move UBOOT_DEVICE_NAME to defaultTianling Shen2023-05-182-3/+1
| | | | | | Simplify variable usage. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: merge bootscriptTianling Shen2023-05-184-18/+12
| | | | | | | | The bootscript for nanopi r2s/r4s only changes the serial address, so make it auto detected in mmc bootscript rather than creating more (redudant) files. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* ipq806x: remove dangling ipq-wifi-edgecore_ecw5410Christian Lamparter2023-05-181-2/+1
| | | | | | | should have been part of the ipq-wifi update. Fixes: 8217f02a1c5e ("ipq-wifi: drop upstreamed board-2.bin") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* imx: image: ventana: add blkdev compressed disk imageTim Harvey2023-05-181-1/+25
| | | | | | | | | | | Add a ventana-img.gz compressed disk image to support squashfs+ext4 on a block storage device such as USB/MMC/SATA. The Ventana bootloader expects the bootscript to be boot/6x_bootscript-ventana therefore we must create a bootfs that matches this. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: image: ventana: use squashfs rootfs for non NAND devicesTim Harvey2023-05-181-2/+2
| | | | | | | In order to support squashfs+ext4 define rootfstype=squashfs and use P2 as P1 is boot filesystem. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ramips: add basic common recipe for nand flash devicesShiji Yang2023-05-181-207/+47
| | | | | | | | These same codes are repeated for many devices now, it's better to move them to shared definition. This commit also add the missing KERNEL_SIZE of the ZyXEL NR7101 and ZyXEL LTE3301-PLUS. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: set default BLOCKSIZE to 64k for nor flash devicesShiji Yang2023-05-187-74/+2
| | | | | | | | | In kernel 5.15, the default erase sector size of the nor flash has been switched from 4k to 64k. This may cause the configuration not be preserved across upgrades. To avoid this issue, change the default BLOCKSIZE to 64k. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: enable variable sector size erasure for all subtargetShiji Yang2023-05-184-2/+4
| | | | | | | | | Make use of minor sector size (4k) on supported flash chips to improve spi read/write performance. Tested on ramips/mt7628: Motorola MWR03 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ipq-wifi: drop upstreamed board-2.binChristian Lamparter2023-05-182-21/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BDFs for the: Aruba AP-365 Devolo Magic 2 WiFi next Edgecore ECW5410 Edgecore OAP100 Extreme Networks WS-AP3915i GL.iNet GL-A1300 GL.iNet GL-AP1300 GL.iNet GL-S1300 Linksys EA8300 Linksys WHW03v2 Nokia Wi4A AC400i P&W R619AC Pakedge WR-1 Qxwlan E2600AC C1 Sony NCP-HG100/Cellular Teltonika RUTX10 ZTE MF18A were upstreamed to the ath10k-firmware repository and landed in linux-firmware.git. Furthermore the BDFs for the: 8devices Habanero 8devices Jalapeno Qxwlan E2600AC C2 have been updated. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mvebu: use PHY LED trigger for speed LEDs on FortiGate 50EINAGAKI Hiroshi2023-05-182-9/+12
| | | | | | | | | | | | | Use <mdio>:<addr>:<speed> trigger instead of netdev(link) trigger for Fortinet FortiGate 50E, to indicate link speed on the each phys. 1000 Mbps: Green 100 Mbps : Amber 10 Mbps : (turn off) Fixes: 102dc5a62506 ("mvebu: add support for Fortinet FortiGate 50E") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mvebu: cortexa9: enable Ethernet PHY LED triggerINAGAKI Hiroshi2023-05-181-0/+1
| | | | | | | To use <mdio>:<addr>:<speed> trigger for LEDs, enable PHY LED trigger (CONFIG_LED_TRIGGER_PHY). Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* octeontx: kernel: add USB storage boot supportTim Harvey2023-05-181-0/+2
| | | | | | | | | Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass Storage device. This increases the kernel Image by 66KiB Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: kernel: add USB storage boot supportTim Harvey2023-05-181-0/+2
| | | | | | | | | Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass Storage device. This adds 23KiB to the compressed kernel size Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* nu801: add kmod-leds-uleds to MR26 + MR18Christian Lamparter2023-05-182-2/+2
| | | | | | | | | | | | | | support for MR18 and MR26 was developped before the userspace nu801 was integrated with x86's MX100 into OpenWrt. The initial nu801 + kmod-leds-uleds caused build-bot errors. The solution that worked for the MX100 was to include the kmod-leds-uleds to the device platform module. Thankfully, the MR26 and MR18 can just add the uleds package to the DEVICE_PACKAGES variable. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: rename to D-Team Newifi D2 and Lenovo Newifi D1Arınç ÜNAL2023-05-183-6/+6
| | | | | | | Rename Newifi D2 to D-Team Newifi D2, and Newifi D1 to Lenovo Newifi D1. Let's not make naming exceptions because of marketing whims. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* ramips: add support for TOZED ZLT S12 PROArınç ÜNAL2023-05-184-0/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TOZED ZLT S12 PRO is an AC1200 router featuring 4 Ethernet ports with a TOZED TL70-C cellular modem which supports the NCM mode. The stock firmware does SIM locking on the modem by stopping dialing when a different PLMN is detected. This is not the case on OpenWrt. Specifications: - CPU: MediaTek MT7621AT - RAM: 256MB DDR3 - NOR Flash: MX25L12833FM2I 16MB SPI Flash - Wi-Fi 2.4Ghz: MT7603E - Wi-Fi 5Ghz: MT7612E - Switch: MT7530 4x 1Gbit Ports - WWAN: Unisoc SL8563 based TOZED TL70-C LTE CAT6 cellular modem - USB: 1x optional USB2.0 external port - Switches/Buttons: WPS, Reset, Power Switch - LEDs: Power, Wi-Fi, Data, Signal 1-5, Phone Installation and TFTP Recovery: - Connect to serial console. - Boot initramfs image by choosing option 1 when U-Boot prompts. - Install sysupgrade image via OpenWrt. Serial Pins: Located at the bottom right when looking from the front, right under the Reset/WPS buttons. The pinout from the left is: - RX - GND - TX Baudrate is 115200. When connecting from a powered off state, disconnect RX as it blocks the boot process. Link: http://www.sztozed.com/en/contents/58/84.html Co-developed-by: Andre Cruz <me@1conan.com> Signed-off-by: Andre Cruz <me@1conan.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* mediatek: remove left-over reference to make_gl_metadata.pyDaniel Golle2023-05-181-3/+1
| | | | | | | | When adding support for the GL.iNet GL-MT3000 a reference to the non-existent make_gl_metadata.py script was accidentally added. Remove it, flashing from vendor firmware also works fine without that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: Fix Wireless Frequencies for HYC-G920Muhammad AL-Qadhy2023-05-181-0/+2
| | | | | | Fix wireless frequencies to show correct wireless interfaces. Signed-off-by: Muhammad AL-Qadhy <m.ismael@gmail.com>
* mediatek: update patch add PWM support for MT7981Daniel Golle2023-05-181-119/+29
| | | | | | Update patch with version submitted upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for the GL.iNet GL-MT3000Daniel Golle2023-05-184-3/+295
| | | | | | | | | | | | | | | | | | | | | | The MT-3000 is a pocket-sized Wi-Fi 6 router based on MediaTek MT7981. Specification: - SoC: MediaTek MT7981B - CPU: 2x 1.3 GHz Cortex-A53 - Flash: 256 MiB Macronix SPI NAND - RAM: 512 MiB Nanya DDR4 - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN) - Ethernet: - 1x 10/100/1000 Mbps built-in PHY (LAN) - 1x 10/100/1000/2500 Mbps MaxLinear GPY211 PHY (WAN) - USB 3.0 port - Buttons: 1 button, 1 switch - LEDs: 1x light-blue, 1x warm-white - Serial console: internal 4-pin header, 115200 8n1 - PWM controlled fan with tacho - Power: 5 VDC, 3 A (USB Type-C) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Cudy WR3000 v1David Bauer2023-05-186-0/+318
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- MediaTek MT7981 WiSoC 256MB DDR3 RAM 16MB SPI-NOR (XMC XM25QH128C) MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5) UART: 115200 8N1 3.3V [LEDS] VCC-GND-RX-TX [ETH] Header is located below the heatsink Case ---- Unscrew the 4 bottom screws. Remove the top of the case by inserting a small screwdriver into the ventilation holes and lift the top cover. This works best by beginning near the ETH-ports. The top is clipped on the front near the LEDs with two plastic clips. The back has a single clip in the middle. Start at one of the back edges. MAC-Addresses ------------- 80:AF:CA:00:F9:C6 LAN 80:AF:CA:00:F9:C7 WAN 80:AF:CA:00:F9:C6 W2 82:AF:CA:30:F9:C6 W5 Installation ------------ 1. Connect to the serial port as described in the "Hardware" section. 2. Power on the device. Keep pressing the "0" key to enter the U-Boot shell. 3. Download the OpenWrt initramfs image. Place it on an TFTP server connected to the Cudy LAN ports. Make sure the server is reachable at 192.168.1.2. Rename the image to "cudy3000.bin" 4. Download and boot the OpenWrt initramfs image. $ tftpboot 0x46000000 cudy3000.bin; bootm 0x46000000 5. Transfer the OpenWrt sysupgrade image to the device using scp. Install with sysupgrade. Note: Cudy does not yet provide a image for disabling their signature-protection. This has happened in the past. Make sure to check the wiki for a possible easier installation method. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: fix typoDavid Bauer2023-05-181-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* bmips: improve kernel patchesÁlvaro Fernández Rojas2023-05-1714-185/+181
| | | | | | | Add missing patch headers and regenerate the ones that contain an obsolete patch header. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath79: add support for MikroTik RB951Ui-2HnDMichał Kępień2023-05-166-0/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MikroTik RB951Ui-2HnD is a wireless SOHO router that was previously supported by the ar71xx target, see commit d19b868b12 ("ar71xx: Add support for MikroTik RB951Ui-2HnD"). Specifications -------------- - SoC: Atheros AR9344 (600 MHz) - RAM: 128 MB (2x 64 MB) - Storage: 128 MB NAND flash (various manufacturers) - Ethernet: Atheros AR8229 switch, 5x 10/100 Mbit/s - 1x PoE in (port 1, 8-30 V input) - 1x PoE out (port 5, 500 mA output) - Wireless: Atheros AR9340 (802.11b/g/n) - USB: 2.0 (1A) - 9x LED: - 1x power (green, not configurable) - 1x user (green) - 5x FE ports (green) - 1x wireless (green) - 1x PoE out (red) - 1x button (restart) See https://mikrotik.com/product/RB951Ui-2HnD for more details. Flashing -------- TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedures at https://openwrt.org/toh/mikrotik/common. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* generic: mtk_eth_soc: don't crash if WO firmware is missingDaniel Golle2023-05-151-0/+28
| | | | | | | Import patch to prevent crashes in case WO firmware is missing on devices with only a single frontend (eg. MT7981+MT7976). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: add support for wireless offloading on MT7981Daniel Golle2023-05-152-1/+47
| | | | | | Load appropriate firmware for wireless offloading on MT7981. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: mikrotik: bump compat version for yafut imagesThibaut VARÈNE2023-05-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Following 5264296, Mirotik NAND devices now use yafut to flash the kernel on devices. This method is incompatible with the old-style "kernel2minor" flash mechanism. Even though NAND images were disabled in default build since 21.02, a user flashing a new-style image onto an old-style image would result in in a soft-brick[1]. In order to prevent such accidental mishap, especially as these device images will be reenabled in the upcoming release, bump the compat version. After the new image is flashed, the compat version can be updated: uci set system.@system[0].compat_version='1.1' uci commit [1] https://github.com/openwrt/openwrt/pull/12225#issuecomment-1517529262 Cc: Michał Kępień <openwrt@kempniu.pl> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Reviewed-by: Robert Marko <robimarko@gmail.com>
* bcm47xx: Refresh patchesHauke Mehrtens2023-05-141-1/+1
| | | | | | | | Refresh patches to make them cleanly apply. This problem was found by the github CI. Fixes: ecd9abc8c082 ("kernel: use upstream firmware patch for Broadcom's NVRAM") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport NVMEM patch for Broadcom's NVRAM MAC cellsRafał Miłecki2023-05-141-0/+77
| | | | | | | It has just been queued for the v6.5. It allows Ethernet drivers to read MACs from NVRAM using NVMEM interface. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: use upstream firmware patch for Broadcom's NVRAMRafał Miłecki2023-05-143-92/+100
| | | | | | This replaces our 2 downstream patches. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mpc85xx: add support for Aerohive BR200-WPPawel Dembicki2023-05-149-5/+544
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following adds the Aerohive BR200-WP router to OpenWrt under the mpc85xx/p1010 subtarget. Hardware: - SoC: Freescale P1011 - NOR: Intel JS28F512M29EWH 64MB - Memory: 2x Nanya NT5TU64M16GG-AC 128MB (Total of 256MB) - 2.4GHz WiFi: Atheros AR9390-AL1A - Eth1: Atheros AR8035-A PoE - 2x LEDs - 1x Button - PoE PSE Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, tftp boot the initramfs image: dhcp; setenv serverip 192.168.1.3; tftpboot 0x2004000 openwrt-mpc85xx-p1010-aerohive_br200-wp-initramfs-kernel.bin; bootm 0x2004000; 3. Once booted, scp over the sysupgrade file and sysupgrade the device to flash LEDE to the NOR. Note: MAC assigns are taken from stock firmware: Name MAC addr Mode State Chan(Width) VLAN Radio Hive SSID -------- -------------- -------- ----- ----------- ---- ---------- ---------- --------- Mgt0 08ea:44XX:XXc0 - U - 1 - hive0 - Eth0 08ea:44XX:XXc0 wan U - - - - - Eth1 08ea:44XX:XXc2 access D - - - hive0 - Eth2 08ea:44XX:XXc3 access D - - - hive0 - Eth3 08ea:44XX:XXc4 access D - - - hive0 - Eth4 08ea:44XX:XXc5 access D - - - hive0 - Wifi0 08ea:44XX:XXd0 access U 1(20MHz) - radio_ng0 - - Wifi0.1 08ea:44XX:XXd4 access D 1(20MHz) - radio_ng0 hive0 - Note2: PoE PSE could be managed with `realtek-poe` package. Example port config: config port option enable '1' option id '4' option name 'lan2' option poe_plus '0' option priority '2' config port option enable '1' option id '3' option name 'lan1' option poe_plus '0' option priority '1' Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (switch@0 -> switch@10, Device's quickstart says LEDs are amber and white => add function+color properties but keep labels around, use pr_info) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kirkwood: Replace dtses with upstream acceptedPawel Dembicki2023-05-149-792/+1020
| | | | | | | | | | | | DTSes from of three boards was sent and accpeted upstream. Let's use backport patches with small OpenWrt tweak like other upstream stuff. List of boards: - Zyxel NSA310S - Endian 4i Edge 200 - Ctera C-200 V1 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ath79: add Cisco Meraki MR18Christian Lamparter2023-05-146-1/+427
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: Atheros/Qualcomm QCA9557-AT4A @ 720MHz RAM: 2x Winbond W9751G6KB-25 (128 MiB) FLASH: Hynix H27U1G8F2BTR-BC TSOP48 ONFI NAND (128 MiB) WIFI1: Atheros AR9550 5.0GHz (SoC) WIFI2: Atheros AR9582-AR1A 2.4GHz WIFI2: Atheros AR9582-AR1A 2.4GHz + 5GHz PHYETH: Atheros AR8035-A, 802.3af PoE capable Atheros (1x Gigabit LAN) LED: 1x Power-LED, 1 x RGB Tricolor-LED INPUT: One Reset Button UART: JP1 on PCB (Labeled UART), 3.3v-Level, 115200n8 (VCC, RX, TX, GND - VCC is closest to the boot set jumper under the console pins.) Flashing instructions: Depending on the installed firmware, there are vastly different methods to flash a MR18. These have been documented on: <https://openwrt.org/toh/meraki/mr18> Tip: Use an initramfs from a previous release and then use sysupgrade to get to the later releases. This is because the initramfs can no longer be built by the build-bots due to its size (>8 MiB). Note on that: Upgrades from AR71XX releases are possible, but they will require the force sysupgrade option ( -F ). Please backup your MR18's configuration before starting the update. The reason here is that a lot of development happend since AR71XX got removed, so I do advise to use the ( -n ) option for sysupgrade as well. This will cause the device to drop the old AR71xx configuration and make a new configurations from scratch. Note on LEDs: The LEDs has changed since AR71XX. The white LED is now used during the boot and when upgrading instead of the green tricolor LED. The technical reason is that currently the RGB-LED is brought up later by a userspace daemon. (added warning note about odm-caldata partition. remove initramfs - it's too big to be built by the bots. MerakiNAND -> meraki-header. sort nu801's targets) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: ar934x: still advertise subpage on soft eccChristian Lamparter2023-05-141-3/+3
| | | | | | | | | | This sort of reverts Koen Vandeputte's commit 6561ca1fa51 ("ath79: ar934x: fix mounting issues if subpage is not supported") since it does not work on the MR18 as the UBI is coming from Meraki in that way and it used to work with AR71XX before. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: nand: enable software BCH supportChristian Lamparter2023-05-141-0/+1
| | | | | | | This is necessary to support the Meraki MR18 and likely Z1 as well. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: set 2048B ECC size for Mikrotik boards using soft ECCLech Perczak2023-05-142-0/+2
| | | | | | | | | | | | | Two Mikrotik board families (SXT 5nD R2 and Routerboard 92x are using software ECC on NAND. Some of them use chips capable of subpage write, others do not - within the same family, and a common block size is required for UBI, to avoid mounting errors. Set the ECC step size explicitly for them to 2048B, so UBI can mount existing volumes without problems, at the same time allowing to unlocking subpage write functionality, reuqired for Meraki MR18. Fixes: 6561ca1fa51 ("ath79: ar934x: fix mounting issues if subpage is not supported") Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* apm821xx: rename MerakiNAND -> meraki-headerChristian Lamparter2023-05-141-2/+2
| | | | | | | specify that this functions adds a Cisco Meraki special-sauce header for their custom loader/uboot. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.15 to 5.15.111John Audia2023-05-1349-3661/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: 01. backport-5.15/424-v6.4-0001-mtd-core-provide-unique-name-for-nvmem-device-take-t.patch 02. backport-5.15/424-v6.4-0002-mtd-core-fix-nvmem-error-reporting.patch 03. generic-backport/424-v6.4-0003-mtd-core-fix-error-path-for-nvmem-provider.patch 04. generic-backport/828-v6.4-0001-of-Fix-modalias-string-generation.patch 05. bcm4908/patches-5.15/031-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch 06. bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit 07. bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgita 08. bcm4908/patches-5.15/033-v6.0-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patchgit 09. bcm4908/patches-5.15/034-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch 10. bcm4908/patches-5.15/036-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch 11. bcm4908/patches-5.15/036-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch 12. ipq806x/patches-5.15/104-v6.0-06-ARM-dts-qcom-ipq8064-reduce-pci-IO-size-to-64K.patch Manually rebased: bcm27xx/patches-5.15/950-0078-BCM2708-Add-core-Device-Tree-support.patch bcm27xx/patches-5.15/950-0547-ARM-dts-Add-Pi-Zero-2-support.patch bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgit bcm4908/patches-5.15/030-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch bcm4908/patches-5.15/032-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch bcm4908/patches-5.15/032-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch bcm4908/patches-5.15/032-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch bcm4908/patches-5.15/033-v6.0-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patchgit bcm4908/patches-5.15/033-v6.0-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patchgit bcm4908/patches-5.15/034-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch bcm4908/patches-5.15/034-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch bcm4908/patches-5.15/034-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch bcm4908/patches-5.15/034-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod 01. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=77112d23a671697f0f70695ab901f807e15d2093 02. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=fe07b3b5af01f42b291f5da0da09d047f50b33a6 03. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=273be36e420924237f6c9d43cdad96718c13dd52 04. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=fe8ab85ed4958e58e991bba0aa0a655b552b0273 05. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=6ae67829fa5e9e71f458f69db42f0e216225616a 06. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=1994284cb9226b65ca3a6744ce3320218b584f26 07. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=a46878476c5549a4fde15a31922ce80a50b23492 08. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=112ff0f2530549d50510f116474924f9c4fad590 09. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=7c253e98685e6d884d12e2618ef4d2ad90b4fbd7 10. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=8444b46e163aa9559a0af0381a1d230ec4146eb2 11. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=6d1af517817a760d7af3dee0fc4603645485495c 12. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=cc4f0e168a5630ad0491ac5328f1a89f3cf3d04e Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: remove device tree legacy compatibilityNick Hainke2023-05-122-64/+0
| | | | | | | We switched to 5.15 kernel, so we don't need to maintain 5.10 compatibility anymore. Signed-off-by: Nick Hainke <vincent@systemli.org>
* treewide: cleanup kernel symbol referencesNick Hainke2023-05-124-9/+4
| | | | | | | | | | | | | | | We only use 5.15 kernel. So remove all those unnecessary symbols referencing 5.10 or 5.15 kernel. Can be found with: git grep -E 'LINUX_5_1(0|5)' Note that we remove the dependency from "sound-soc-chipdip-dac" instead of removing the complete kernel package. The 5.15 version bump forgot to delete the "@LINUX_5_10" dependency. The kernel package is still needed in 5.15 kernel. Signed-off-by: Nick Hainke <vincent@systemli.org>
* treewide: remove all @{lt,gt,ge,le} appearances affecting 5.10 kernelNick Hainke2023-05-121-1/+0
| | | | | | We only use 5.15 kernel. So remove all those unnecessary appearances. Signed-off-by: Nick Hainke <vincent@systemli.org>
* treewide: remove files for building 5.10 kernelNick Hainke2023-05-121544-254274/+0
| | | | | | | | | | | All targets are bumped to 5.15. Remove the old 5.10 patches, configs and files using: find target/linux -iname '*-5.10' -exec rm -r {} \; Further, remove the 5.10 include. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath25: switch default kernel to 5.15Nick Hainke2023-05-121-2/+1
| | | | | | | | | | | | Switch to kernel 5.15 although it is marked as source only. It is marked as source only because nobody was able to test this device. Merging this is important to finally branch a new release. We want to get rid completely of 5.10 kernel. Without this commit we get following error: "Missing kernel version/hash file for 5.10." Hopfully someone will fix the board in the rc phase or it will be removed completly. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath25: 5.15: enable 5.15 testing kernelNick Hainke2023-05-1211-46/+61
| | | | | | | | | | | | | | | | | | | | | | | Manually refreshed: - 140-redboot_boardconfig.patch - 141-redboot_partition_scan.patch - 142-redboot_various_erase_size_fix.patch Automatically refreshed: - 107-ar5312_gpio.patch - 108-ar2315_gpio.patch - 110-ar2313_ethernet.patch - 120-spiflash.patch - 130-watchdog.patch - 330-board_leds.patch Use "make kernel_oldconfig" to refresh the new kernel config. The Ubiquiti Nanostation 2 (XS2) and Ubiquiti Nanostation 5 (XS5) should be marked as broken when switching to 5.15 by default. The new kernel does not fit anymore into the partition. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath25: 5:15: copy config and patch from 5.10Nick Hainke2023-05-1213-0/+3843
| | | | | | Copy config and patch from kernel 5.10 to kernel 5.15. Signed-off-by: Nick Hainke <vincent@systemli.org>
* omap: switch default kernel to 5.15Alexey Smirnov2023-05-121-2/+1
| | | | | | | | | | | | | | | | | | | | | | Switch to kernel 5.15 although it is marked as source only. It is marked as source only because the eth0 interface can't be added to the br-lan default interface resulting in a broken ethernet [0]. There is a workaround to set a higher pvd (e.g. to 4000) in the dts [1]. Other functionality was already tested on a Beaglebone Black for +6month now without issues. Merging this is important to finally branch a new release. We want to get rid completely of 5.10 kernel. Without this commit we get following error: "Missing kernel version/hash file for 5.10." Hopfully someone will fix the board in the rc phase. - [0] https://github.com/openwrt/openwrt/issues/11953 - [1] https://github.com/openwrt/openwrt/issues/11953#issuecomment-1419078990 Signed-off-by: Alexey Smirnov <s.alexey@gmail.com> [rewrite commit message] Signed-off-by: Nick Hainke <vincent@systemli.org>
* lantiq: 5.15: fix compilation warning pciex fixup patchChristian Marangi2023-05-121-1/+1
| | | | | | | | | | | | | | | | | pcibios_map_irq request a const pci_dev while pci_find_capability doesn't. Cast dropping the const to fix compilation warning. Fix compilation warning: arch/mips/pci/fixup-lantiq.c: In function 'pcibios_map_irq': arch/mips/pci/fixup-lantiq.c:34:33: error: passing argument 1 of 'pci_find_capability' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] 34 | if (pci_find_capability(dev, PCI_CAP_ID_EXP)) | ^~~ In file included from arch/mips/pci/fixup-lantiq.c:9: ./include/linux/pci.h:1129:40: note: expected 'struct pci_dev *' but argument is of type 'const struct pci_dev *' 1129 | u8 pci_find_capability(struct pci_dev *dev, int cap); | ~~~~~~~~~~~~~~~~^~~ cc1: all warnings being treated as errors Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* linux/generic/hack-5.15: add missing patch headerFlorian Eckert2023-05-121-47/+65
| | | | | | | This patch does not have a valid patch headers and does not apply on an external git tree with 'git am'. To fix this add the missing header. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ramips: fix mt7621 kernel compilationDavid Bauer2023-05-122-8/+14
| | | | | | | | | The OF LED configuration patch fails on MT7621, as the necessary headers were only included for the mediatek subtarget with an additional patch. Fixes: 242fe8634eba ("generic: add hack for MT753x LED configuration") Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: rb91x_nand: fix compilation warning for dev_errChristian Marangi2023-05-121-1/+1
| | | | | | | | | | | | | | | | | Fix compilation warning for dev_err in rb91x_nand driver. Fix compilation warning: drivers/mtd/nand/raw/rb91x_nand.c:289:25: note: in expansion of macro 'dev_err' 289 | dev_err(dev, "failed to get gpios: %d\n", | ^~~~~~~ drivers/mtd/nand/raw/rb91x_nand.c:289:61: note: format string is defined here 289 | dev_err(dev, "failed to get gpios: %d\n", | ~^ | | | int | %ld cc1: all warnings being treated as errors Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 11:16:33 +0000