aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* realtek: 5.15: Improve error handling in rtl838x_pie_rule_write()Pascal Ernster2023-01-051-6/+10
| | | | | | | In target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c, make rtl838x_pie_rule_write() return non-zero value case of error. Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: 5.15: Improve rtl838x dsa driver error handlingPascal Ernster2023-01-051-24/+32
| | | | | | | | | Make sure functions calling rtl838x_smi_wait_op() return its return value in target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c. This brings the code style in line with the rtl839x implementation. Suggested-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: return correct error value for phy opsPascal Ernster2023-01-051-2/+2
| | | | | | | | | | | | | | | | | | | | | A behavioural change was introduced with commit 758c88b96963 ("realtek: Whitespace and codestyle cleanup") causing rtl838x_read_phy() and rtl838x_write_phy() to unconditionally return -ETIMEDOUT. As a result, probing the device during boot fails: Error setting up netdev, freeing it again. rtl838x-eth: probe of 1b00a300.ethernet failed with error -5 Fix the bootloop caused by this regression with kernel 5.15 on rtl838x devices, by properly returning 0 on success. Tested on a Netgear GS108T v3, a Netgear GS310TP v1, a Zyxel GS1900-8HP v1 and an HPE 1920-8G. Fixes: 758c88b969639d0e6b684669d2e54dd1be3102f4 ("realtek: Whitespace and codestyle cleanup") Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: Migrate to upstream generic MIPS addressesOlliver Schinagl2023-01-053-4/+4
| | | | | | | | | | Upstream generic MIPS uses 0x80100000 and 0x80100400 for the LOADADDR and ENTRY addresses. As we do not want to diverge from upstream and patch upstream when not needed, adjust our addresses as well to be future proof. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Tested-by: Jan Hoffmann <jan@3e8.eu> # HPE 1920-8G, HPE 1920-48G
* ramips: add Unielec U7621-06 32M build targetIgnas Poklad2023-01-052-0/+90
| | | | | | | | | Add 32M build target Rest of the details as per commit 46ab81e405d2 ("ramips add support for UniElec U7621-06") Signed-off-by: Ignas Poklad <ignas2526@gmail.com>
* ath79: convert Netgear WNDAP360 WiFis to nvmem-cellsNick Hainke2023-01-043-31/+32
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Nick Hainke <vincent@systemli.org>
* lantiq-xrx200: fix wan LED on o2 box 6431Florian Maurer2023-01-041-1/+4
| | | | | | | | | | | The WIFI LED already worked for me with the latest openwrt 22.03 version. Wifi LED did not with an older 22.x version (in gluon - there phy0radio did nothing but phy0tpt did show activity the WAN interface has the name "wan" and not "pppoe-wan" on this device fixes #7757 (and FS#2987) Signed-off-by: Florian Maurer <f.maurer@outlook.de>
* ramips: enable Wi-Fi LED support for Afoundry EW1200Shiji Yang2023-01-041-2/+14
| | | | | | Add LED properties to PCIe node to enable Wi-Fi LED support. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: enable Wi-Fi LED support for Zbtlink ZBT-WE1326Shiji Yang2023-01-041-2/+14
| | | | | | Add LED properties to PCIe node to enable Wi-Fi LED support. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add basic support for tp-link er605-v2Nikolay Martynov2023-01-044-0/+213
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a MT7621-based device with 128MB NAND flash, 256MB RAM, and a USB port. The board has headers to attach console. In order for them to work two solder bridges near those pads need to be made. The defice has the following partition table: ``` 0x000000000000-0x000000080000 : "u-boot" 0x000000080000-0x000000100000 : "u-boot-env" 0x000000100000-0x000000140000 : "factory" 0x000000140000-0x000007e00000 : "firmware" 0x000007e00000-0x000008000000 : "panic-ops" ``` `firmware` partition contains UBI volumes. Unfortunately I accidentally wiped partition and I no longer have access to it. `firmware` partition contains 'secondary' U-Boot which is run by 'first' u-boot. It also contains various configuration partitions that include device info and MAC address. There also seems to be 'primary' and 'backup' set of 'main' volumes. U-boot has `mtkupgrade` command that just overrides data on firmware partitions. Firmware file provided by TP-Link cannot be used with that command. U-boot also has 'recovery' http server. Unfortunately I was not able to make it work with manufacturer's firmware. Manufacturer's firmware essentially contains multiple UBI volumes along with 'partition table'. Unfortunately I no longer can properly run manufacturer's firmware so I cannot at the moment try to a support for building 'factory' images. This patch adds support for initramfs image as well as sysupgrade image. This seems to be pretty standard MT7621 board otherwise. Things that work: * network * leds * usb * factory MAC detection Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
* ramips: add missing LEDs to Asus RT-AX53UMarian Sarcinschi2023-01-043-3/+19
| | | | | | | | | | | | | | | | This patch adds the missing LEDs to Asus RT-AX53U. Based on PR #10400 and patch provided in #11068 - enable the two LEDs controlled by mt7915e for wireless; - add label to power LED so it works properly and fix formatting; - add the USB LED; - switch LEDs are best left to be controlled by hardware for now. Co-Authored-By: Ivan Rozhuk <rozhuk.im@gmail.com> Co-Authored-By: Shiji Yang <yangshiji66@qq.com> Co-Authored-By: Hartmut Birr <e9hack@gmail.com> Tested-by: Felix Baumann <felix.bau@gmx.de> Tested-by: Marian Sarcinschi <znevna@gmail.com> Signed-off-by: Marian Sarcinschi <znevna@gmail.com>
* ipq40xx: fix wlan mac address for Aruba AP-303HBjoern Dobe2023-01-041-4/+6
| | | | | | | | | | | Assigns the correct mac address from nvmen to the wlan interfaces. This Mac address corresponds to the label "Wireless MAC" on the device and the stock firmware. Removes duplicate entry of calibration variant for both radios. Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>
* generic: 5.15: backport qca8k fixup for mgmt and mdio read/writeChristian Marangi2023-01-045-0/+531
| | | | | | | | Backport qca8k fixup for mgmt and mdio read/write for kernel 5.15 fixup port dropping and configuration issue. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* generic: 5.10: backport Treat IPv4 segment's lowest address as unicastSeth David Schoen2023-01-041-0/+32
| | | | | | | | | | | | | | | | | | | Backport patch from kernel 5.14. Treat only the highest, not the lowest, IPv4 address within a local subnet as a broadcast address, as subnets do not need two different broadcast addresses and networking documentation consistently prefers the highest address as broadcast. This patch was merged in upstream net-next tree in May 2021 at https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=94c821c74bf5 This eventually frees up one address per subnet. It matches behavior suggested in our Internet-Draft, and also the default behavior of OpenBSD and FreeBSD. Signed-off-by: Seth David Schoen <schoen@loyalty.org>
* kernel: bump 5.15 to 5.15.86John Audia2023-01-0354-224/+158
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch[1] ipq806x/patches-5.15/122-01-clk-qcom-clk-krait-fix-wrong-div2-functions.patch[2] bcm27xx/patches-5.15/950-0198-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch[3] Manually rebased: ramips/patches-5.15/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch[4] Added patch/backported: ramips/patches-5.15/107-PCI-mt7621-Add-sentinel-to-quirks-table.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=c160505c9b574b346031fdf2c649d19e7939ca11 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=a051e10bfc6906d29dae7a31f0773f2702edfe1b 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=ec1727f89ecd6f2252c0c75e200058819f7ce47a 4. Quilt gave this output when I applied the patch to rebase it: % quilt push -f Applying patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch patching file arch/mips/ralink/Kconfig patching file drivers/pci/controller/Kconfig patching file drivers/pci/controller/Makefile patching file drivers/staging/Kconfig patching file drivers/staging/Makefile patching file drivers/staging/mt7621-pci/Kconfig patching file drivers/staging/mt7621-pci/Makefile patching file drivers/staging/mt7621-pci/TODO patching file drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt patching file drivers/staging/mt7621-pci/pci-mt7621.c Hunk #1 FAILED at 1. Not deleting file drivers/staging/mt7621-pci/pci-mt7621.c as content differs from patch 1 out of 1 hunk FAILED -- saving rejects to file drivers/staging/mt7621-pci/pci-mt7621.c.rej patching file drivers/pci/controller/pcie-mt7621.c Applied patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch (forced; needs refresh) Upon inspecting drivers/staging/mt7621-pci/pci-mt7621.c.rej, it seems that the original patch wants to delete drivers/staging/mt7621-pci/pci-mt7621.c but upstream's version was not an exact match. I opted to delete that file. 5. Suggestion by hauke: https://github.com/torvalds/linux/commit/19098934f910b4d47cb30251dd39ffa57bef9523 "This patch is in upstream kernel, but it was backported to the old staging driver in kernel 5.15." Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* oxnas: sata_oxnas: use ata_link_errRobert Marko2023-01-031-1/+1
| | | | | | | | | | | | | | Kernel 5.15.86 has backported ("ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros") and this is now causing compilation errors for oxnas SATA driver due to usage of ata_link_printk(). Upstream has migrated to using the appropriate ata_link_{err, warn, notice, info} calls a while ago so its not affected. Lets do the same for oxnas SATA driver and use ata_link_err() instead of ata_link_printk(). Signed-off-by: Robert Marko <robimarko@gmail.com>
* octeontx: add 5.15 testing kernelNick Hainke2023-01-033-14/+24
| | | | | | | | | | Add 5.15 as testing. Refreshed: - 0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* octeontx: 5.15: copy configNick Hainke2023-01-032-0/+471
| | | | | | Copy config from kernel 5.10 to kernel 5.15. Signed-off-by: Nick Hainke <vincent@systemli.org>
* zynq: add 5.15 testing kernelNick Hainke2023-01-032-10/+14
| | | | | | | | Enable testing kernel. Reviewed-by: Luis Araneda <luaraneda@gmail.com> Tested-by: Luis Araneda <luaraneda@gmail.com> (Digilent Zybo Z7-20) Signed-off-by: Nick Hainke <vincent@systemli.org>
* zynq: 5.15: copy configNick Hainke2023-01-031-0/+548
| | | | | | Copy config from kernel 5.10 to kernel 5.15. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq40xx: delete files used for building 5.10 kernelNick Hainke2023-01-0325-2442/+0
| | | | | | | The kernel 5.15 now defaults. Remove unnecessary files. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* realtek: Migrate to libdeflateOlliver Schinagl2023-01-023-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Libdeflate is a more advanced gzip compressor, which allows for faster decompression, higher compression speed (factor 3-4), while being fully gzip compatible. Some comparison gzip | libdeflate-gzip | delta | image [openwrt-realtek-rtl839x-*] --------+-----------------+--------+----------------------------------------------- 6589174 | 6298794 | 290380 | d-link_dgs-1210-52-initramfs-kernel.bin 6291632 | 6029488 | 262144 | d-link_dgs-1210-52-squashfs-factory_image1.bin 6292270 | 6030128 | 262142 | d-link_dgs-1210-52-squashfs-sysupgrade.bin 6589142 | 6298760 | 290382 | zyxel_gs1900-48-initramfs-kernel.bin 6292264 | 6030122 | 262142 | zyxel_gs1900-48-squashfs-sysupgrade.bin and changing lzma to (libdeflate-)gzip on existing rtl930x target: gzip | libdeflate-gzip | delta | image [openwrt-realtek-rtl930x-*] --------+-----------------+--------+-------------------------------------- 6816230 | 6510382 | 305848 | zyxel_xgs1250-12-initramfs-kernel.bin Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Reviewed-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Sander Vanheule <sander@svanheule.net>
* realtek: Disable boston clockOlliver Schinagl2023-01-018-8/+4
| | | | | | | We are not on the 'boston' platform so no point in having that clock driver enabled. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* tfa-layerscape: Use trusted-firmware-a.mkHauke Mehrtens2022-12-311-14/+14
| | | | | | | | This converts the trusted firmware arm build Makefile to make use of the common trusted-firmware-a.mk file. This also fixes the build with binutils 2.39. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: sysupgrade: allow flashing Linksys factory firmwareTony Ambardar2022-12-311-0/+18
| | | | | | | | | | | | | | | | | Allow forced flashing of a factory firmware image, after checking for the correct FIT magic header and Linksys board-specific footer. Details of the footer are already described in scripts/linksys-image.sh. This is convenient as it avoids using a TFTP server or OEM GUI, and allows restoring OEM firmware or installing a "breaking" OpenWrt update (e.g DSA migration and kernel repartition) directly from the command line. Devices supported at this time include EA6350v3, EA8300, MR8300 and WHW01. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Wyatt Martin <wawowl@gmail.com> # WHW01 Tested-by: Tony Ambardar <itugrok@yahoo.com> # EA6350v3 Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: migrate Linksys WHW01 to DSA and re-enableTony Ambardar2022-12-313-2/+22
| | | | | | | | | Convert Linksys WHW01 network configuration to DSA and re-enable builds. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: fix up Linksys WHW01 board name, device definitionTony Ambardar2022-12-314-11/+8
| | | | | | | | | | | | | | Update the board name defined in DTS to match online documentation and the name encoded into factory firmware. This helps supports flashing firmware factory images using 'sysupgrade'. Original WHW01 device definition assumes the rootfs IMAGE_SIZE is 33 MB instead of the correct 74 MB, and defines factory images which include extra adjustments/padding that do not match OEM factory images and may cause problems flashing. Update image size and build recipe to fix these. Suggested-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: re-enable EA6350v3, EA8300, MR8300 buildsTony Ambardar2022-12-314-23/+38
| | | | | | | | | | | | | | | | | | | | | | | | | Raise the kernel size from 3 MB to 5 MB for EA6350v3, EA8300 and MR8300, and correspondingly reduce the rootfs size by 2 MB: * modify partition definitions in related .dts files * modify device kernel/image sizes in generic.mk Update to compat-version 2.0 to force factory image usage on sysupgrade, noting the current version 1.1 is an unreleased update for DSA migration. Also update the compat-version message, explaining the need to run one of the following console commands to update U-Boot's kernel-size variable before flashing the OpenWrt factory image. fw_setenv kernsize 500000 # (OpenWrt command line) setenv kernsize 500000 ; saveenv # (U-Boot serial console) Finally, re-enable the 3 devices. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Nicolas TORMO <badulesia.granieri@gmail.com> # MR8300 Tested-by: Tony Ambardar <itugrok@yahoo.com> # EA6350v3 Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* bcm47xx: replace "Devices-database-update-patch" with upstream patchesNick Hainke2022-12-307-268/+428
| | | | | | | | | | | | | Replace "320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch" with upstream patches: - 320-v5.17-MIPS-BCM47XX-Add-board-entry-for-Linksys-WRT320N-v1.patch - 321-v5.17-MIPS-BCM47XX-Add-support-for-Netgear-R6300-v1.patch - 322-v5.17-MIPS-BCM47XX-Add-support-for-Netgear-WN2500RP-v1-v2.patch - 323-v6.0-MIPS-BCM47XX-Add-support-for-Netgear-WNR3500L-v2.patch - 324-v5.17-MIPS-BCM47XX-Add-LEDs-and-buttons-for-Asus-RTN-10U.patch - 325-v5.17-MIPS-BCM47XX-Define-Linksys-WRT310N-V2-buttons.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* bcm47xx: add tags to upstreamed patchesNick Hainke2022-12-309-0/+0
| | | | | | All of the mtd patches are upstreamed to 5.18. Add tags indicating this. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ramips: enable BBT on NAND in I-O DATA devicesINAGAKI Hiroshi2022-12-302-0/+10
| | | | | | | | | | | This patch enables MediaTek NAND BBT on I-O DATA devices manufactured by MSTC (MitraStar Technology Corp.). [WN-AX2033GR] Tested-by: Yanase Yuki <dev@zpc.sakura.ne.jp> [WN-AX1167GR2, WN-DX1167R, WN-DX1200GR, WN-DX2033GR] Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: drop redmi-ax6000 variant with modified envChuanhong Guo2022-12-304-60/+0
| | | | | | | | | | | | | | | | | | | This variant uses xiaomi factory u-boot and modified u-boot-env & bootcmd. By modifying uboot-env, the xiaomi firmware recovery provided in the vendor u-boot doesn't work anymore. It's possible to put u-boot into a state where it refuese to take any serial input. If the u-boot is in this state, users can't restore their firmware without taking the flash off the board. We now have a -stock variant where the vendor u-boot is used in a way that xiaomi firmware recovery still works, and a -ubootmod variant where we get rid of all xiaomi components, have more usable space and no uart console lock. These two should cover all use cases and we don't need this variant anymore. Drop this redmi-ax6000 variant. Existing users of this variant should perform a u-boot mod or restore to the -stock layout. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: Refresh patchesHauke Mehrtens2022-12-291-2/+2
| | | | | | The patch was not applying cleanly any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: convert Aruba AP-303H to DSA and enable target againNick Hainke2022-12-293-2/+34
| | | | | | | | | The target was disabled since noone did the DSA conversion. Add the conversion and enable it again. Tested-by: John Walshaw <jjw@myself.com> Signed-off-by: Bjoern Dobe <bjoern@dobecom.de> Signed-off-by: Nick Hainke <vincent@systemli.org>
* mpc85xx: change CPU_TYPE from 8540 to 8548Šimon Bořek2022-12-291-1/+1
| | | | | | | | | | | | | | | | | | All subtargets as p1010, p1020, p2020 uses e500v2 cores [1] [2] [3] [4], so let's force cpu type to 8545 for all mpc85xx target even though there might exist device with e500v1, but there is no such router supported in OpenWrt and because of that it does not make sense to to set CPU_TYPE for each subtarget. All MPC85xx SoC can be found here: https://www.nxp.com/products/processors-and-microcontrollers/legacy-mpu-mcus/powerquicc-processors:POWERQUICC_HOME#powerquicc-iii-mpc85xx [1] https://www.nxp.com/docs/en/application-note/AN2807.pdf [2] https://www.nxp.com/docs/en/fact-sheet/QP1010FS.pdf [3] https://www.nxp.com/docs/en/product-brief/P1020PB.pdf [4] https://www.nxp.com/docs/en/fact-sheet/QP20XXFS.pdf Co-authored-by: Pali Rohár <pali@kernel.org> Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
* mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-BootFurong Xu2022-12-298-20/+92
| | | | | | | | | This new layout is only bootable with OpenWrt U-Boot. It reuses the two crash partions and expands the ubi partion to the end of whole flash. Do not use this layout with stock U-Boot! Signed-off-by: Furong Xu <xfr@outlook.com>
* realtek: deduplicate GS1900 recipesSander Vanheule2022-12-283-23/+18
| | | | | | | | | | ZyXEL GS1900 devices with SoCs from both the RTL838x and RTL839x families share the same image structure and size of the firmware partition. Additionally, the GS1900-48 recipe provided a parameter for the zyxel-vers command, but this parameter is not used. Deduplicate the recipes by moving it to target/linux/realtek/image/common.mk. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: fix GS1900-48 firwmare partitionSander Vanheule2022-12-283-5/+5
| | | | | | | | | | The listed partition size doesn't match the original partition size, and actually overlaps with the following partition. The partition node name for the "firmware" partition also has an extra 'b' compared to the partition offset. Fixes: 47f5a0a3eed5 ("realtek: Add support for ZyXEL GS1900-48 Switch") Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: fix ZYXELS_VERS for GS1900-48Sander Vanheule2022-12-281-1/+1
| | | | | | | | | | | | | | | | | The GS1900-48 firmware image is identified by the 'AAHN' ID, while the GS1900-48HP is identified by 'AAHO' [1]. The latter was used, resulting in the following error message when upgrading via the stock web UI: Device only can support firmware from V1.00(AAHN.0) and later version Fix image generation by using the correct ID. [1] https://download.zyxel.com/GS1900-48/firmware/GS1900-48_2.70(AAHN.3)C0_2.pdf Link: https://forum.openwrt.org/t/146533 Fixes: 47f5a0a3eed5 ("realtek: Add support for ZyXEL GS1900-48 Switch") Suggested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: fix default image generationSander Vanheule2022-12-281-3/+3
| | | | | | | | | | | | While cleaning up the makefiles for the realtek target, the order of the default image generating commands was accidentally changed. This caused the image signature to end up somewhere in the middle, misaligning the rootfs. As a result, sysupgrade couldn't verify upgrade images anymore, and devices end up in a boot loop due to the unaligned (and not found) rootfs. Fixes: 94d8b4852b9f ("realtek: Cleanup Makefiles") Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: fix calibration-art for some boardsNick Hainke2022-12-281-4/+4
| | | | | | | | | "0x1000" looks suspicious. By looking at data provided by @DragonBluep I was able to identify the correct size for AR9380, AR9287 WiFis. Furthermore, PowerCloud Systems CAP324 has a AR9344 WiFi. Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: fix ethernet regression on mt7986Felix Fietkau2022-12-282-6/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add support for read/write uboot env to Asus RX-AX53UFelix Baumann2022-12-281-2/+11
| | | | | | | | | | | | | | | | | | Add support for read/writing uboot env by renaming the second partition to its stock label "nvram" and remove the deemed unnecessary "read-only". Split the first partition "u-boot" in two, in order to allow `fw_setenv` safe write-access to the uboot environment variables. This implements hauke's request from [1]. Based on the patch provided by Shiji Yang. [1] https://github.com/openwrt/openwrt/pull/10400#discussion_r945153224 Co-Authored-By: Shiji Yang <yangshiji66@qq.com> Signed-off-by: Felix Baumann <felix.bau@gmx.de> [ improve commit title and description, fix some whitespace problem ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* realtek: Fix reset register accessBirger Koblitz2022-12-282-2/+2
| | | | | | | | | | | The reset register on RTL93xx not merely have bits to execute a reset of a hardware component, but also configuration bits for reset procedures. Keep them during executing a reset. Signed-off-by: Birger Koblitz <git@birger-koblitz.de> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> [backport to 5.10 kernel] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* bcm27xx: fix BCMGENET kernel configÁlvaro Fernández Rojas2022-12-282-0/+54
| | | | | | | | | | | Revert backported upstream commits 421f8663b3a7 and 8d820bc9d12b, which have introduced a regression in BCMGENET kconfig that disabled the network driver for the Raspberry Pi. Fixes: 0c405bceba11 ("kernel: bump 5.15 to 5.15.85") Fixes: e9008223268c ("kernel: bump 5.15 to 5.15.84") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: mediatek: fix WED offload regression on MT7622Felix Fietkau2022-12-271-0/+55
| | | | | | Fix dealing with DSA untagging offload Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: mediatek: improve ethernet fix for dealing with small fragmentsFelix Fietkau2022-12-272-21/+37
| | | | | | | Replace the workaround on MT7986 with a proper fix. Software workaround is still needed on older chips. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* realtek: Reduce variable scopesOlliver Schinagl2022-12-2712-443/+335
| | | | | | | | | | | | | | Linus prefers to have loop initializers nice and tightly scoped. In OpenWRT this has been possible since 41a1a652fbd4 ("kernel: backport gnu11 upgrade"). This patch cleans up variable scope while trying to do the above for 'simple for loops'. This cleans up and simplifies some functions and code, and pulls in variables to a smaller scope. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* realtek: Cleanup MakefilesOlliver Schinagl2022-12-279-31/+110
| | | | | | | Our current Makefiles a little bit messy and can be improved somewhat, both in whitespace and in style. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* realtek: Replace C++ style commentsOlliver Schinagl2022-12-2720-964/+966
| | | | | | | The only exception to C++ style comments are SPDX license identifier markers at the start of C files (even headers have C style markers). Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 13:14:20 +0000