aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* brcm2708: update linux 4.9 patches to latest versionÁlvaro Fernández Rojas2017-03-04203-2012/+8458
| | | | | | | | | | As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.9.y - Remove led1 from diag.sh for RPi3 since it causes boot issues. - Fix modules.mk typos. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to 4.4.52Kevin Darbyshire-Bryant2017-03-0314-96/+28
| | | | | | | | | | | | Bump kernel from 4.4.50 to 4.4.52 Refresh patches Compile tested all 4.4. targets Run tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* ramips: remove kmod-mt76* from EX2700 imagesJoseph C. Lehner2017-03-011-1/+1
| | | | | | | These modules are not needed by the EX2700, since it does not have an external wifi chip (MT7620A is covered by rt2x00). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ramips: rename patch file suffix from .c to .patchFurong Xu2017-03-012-0/+0
| | | | Signed-off-by: Furong Xu <xfr@outlook.com>
* ramips: add support for Afoundry EW-1200Francois Goudal2017-03-017-0/+142
| | | | | | | | | | | | | | | | | | | | | | This device features both a 2.4 and 5Ghz radio, and supports 802.11a/b/g/n/ac modes. It has 5 Gb-Ethernet ports and a USB 3.0 host port. It is powered by the Mediatek MT7621 SoC, and the MT7602E and MT7612E wifi chipsets, together with 128MB of RAM and 16 MB of SPI Flash. The stock firmware is in fact based on some openwrt barrier breaker, with a mediatek SDK kernel, and an afoundry custom made web interface (not LuCI based). Firmware update page on the stock web interface can not accept sysupgrade images, it bricks the device. At this point, the only working solution I found was to connect to the serial console port (available on J4 header) and to use opkg to install dropbear. Then scp the sysupgrade file in the device's /tmp and run sysupgrade from console without preserving configuration files. Signed-off-by: Francois Goudal <francois@goudal.net>
* kernel: fix earlycon by keeping __earlycon_tableRafał Miłecki2017-03-012-1/+10
| | | | | | | | Somewhere between 4.4 and 4.9 there was a change that made OF_EARLYCON_DECLARE adding entries to the __earlycon_table instead of __earlycon_of_table. We need to keep this table as well. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport Broadcom's iProc QSPI driverRafał Miłecki2017-03-019-0/+2300
| | | | | | | | This driver has been added instead of improving spi-bcm53xx. It has some advantages: allows SPI speed control & hopefully doesn't have bug that was stopping us from using multiple SPI messages for writing flash data. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kirkwood: fix include in etc/board.d/02_networkAlberto Bursi2017-02-281-0/+1
| | | | | | the mtd_get_mac_ascii function called within this script requires the inclusion of /lib/functions/system.sh Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ramips: add support for HiWiFi HC5962ZengFei Zhang2017-02-286-1/+176
| | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com Short specification: - MT7621AT + MT7612EN + 7603EN - 256MB DDR3 RAM - 128MB NAND flash - 1+3 x 1000M Ethernet - 1x USB 2.0 port. 1x USB 3.0 port. - reset button - UART pad on PCB (JP3: TX, RX, GND, 3.3V) Flash instruction: 1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin 2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/ 3, use the following commands: $ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware $ mtd erase firmware_backup && reboot After reboot you should be able to login as root via SSH on 192.168.1.1 Signed-off-by: ZengFei Zhang <zhangzengfei@kunteng.org>
* bcm53xx: backport accepted BCM5301X and BCM53573 patchesRafał Miłecki2017-02-2818-0/+1378
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix MIPS memory function optimization build error in decompressorFelix Fietkau2017-02-281-10/+20
| | | | | | | | | | | | | | | | | | Fixes the following build error: CC arch/mips/boot/compressed/decompress.o OBJCOPY arch/mips/boot/compressed/vmlinux.bin XZKERN arch/mips/boot/compressed/vmlinux.bin.z OBJCOPY arch/mips/boot/compressed/piggy.o LD vmlinuz arch/mips/boot/compressed/decompress.o: In function `lzma2_lzma': /tmp2/mehrtens/linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_lzma2.c:884: undefined reference to `memmove' make[1]: *** [vmlinuz] Error 1 make: *** [vmlinuz] Error 2 lib/decompress_unxz.c only defines its own memmove function if there is no macro with the same name. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: enable CLK_BCM_NSP for kernel 4.9Rafał Miłecki2017-02-281-1/+1
| | | | | | This is required to get booting kernel. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm63xx: CPVA502+: add SPROM wifiDaniel Gonzalez Cabanelas2017-02-2842-111/+118
| | | | | | | | | | Add SPROM wifi to the kernel board data. After this fix, the wifi won't work anyway due the lack of RAM memory (16 MB). It will throw a kernel panic when loading the b43 drivers. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
* brcm63xx: CPVA502+: fix userspace supportDaniel Gonzalez Cabanelas2017-02-283-2/+5
| | | | | | Fix board name typo, fix network configuration and add a led trigger. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
* brcm63xx: CPVA502+: fix image generationDaniel Gonzalez Cabanelas2017-02-281-4/+3
| | | | | | Fix typo, erase pointless option and allow to build the image. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
* brcm63xx: CPVA502+: fix LEDs and buttons at DTSDaniel Gonzalez Cabanelas2017-02-281-3/+17
| | | | | | Leds are wrong and a button is missing, fix them. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
* brcm63xx: fix external IRQ edge type senseDaniel Gonzalez Cabanelas2017-02-281-1/+1
| | | | | | | | | | Fix the register for configuring rising/falling edge Rising should be sense=1, and falling sense=0. The old driver used these values, but the new one have them flipped. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
* kernel: sort generic configsJonas Gorski2017-02-283-62/+60
| | | | | | | Use kconfig.pl to sort the generic configs and get rid of duplicate entries. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* kernel: add another missing TPM symbolJohn Crispin2017-02-273-0/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: add missing TPM related config symbol for 3.18Felix Fietkau2017-02-271-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: select kmod-mt7603 instead of kmod-mt76 for WBMR-300HPDFelix Fietkau2017-02-271-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix TPM related config symbols for 4.9Felix Fietkau2017-02-271-1/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing HW_RANDOM_TPM symbolJohn Crispin2017-02-273-0/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: add support for HiWiFi HC5661AWang JiaWei2017-02-277-2/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HC5661A is almost the same as HC5661 but MT7628AN is used instead of MT7620A. - MT7628AN - 128 MiB DDR2 RAM (W971GG6KB-25) - 16 MiB SPI NOR flash (W25Q128) - SD slot (not work yet) - 1+4 x 100M Ethernet - 802.11 b/g/n Wi-Fi - 3 x LED - 1 x button - UART pad on PCB (JP1: TX, RX, GND, 3.3V) The factory flash layout seems different from HC5661. "hwf_config" is renamed to "oem" and its size changes to 0x20000. It is modified accordingly in the dts file. 0x000000000000-0x000000030000 : "u-boot" 0x000000030000-0x000000040000 : "hw_panic" 0x000000040000-0x000000050000 : "Factory" 0x000000050000-0x000000160000 : "kernel" 0x000000160000-0x000000fc0000 : "rootfs" 0x000000bb0000-0x000000fc0000 : "rootfs_data" 0x000000fc0000-0x000000fe0000 : "oem" 0x000000fe0000-0x000000ff0000 : "bdinfo" 0x000000ff0000-0x000001000000 : "backup" 0x000000050000-0x000000fc0000 : "firmware" To install LEDE, enabled the "developer mode", which will *void your warranty* and open the SSH server at port 1022. sysupgrade -n -F lede-ramips-mt7628-hc5661a-squashfs-sysupgrade.bin SD slot: - Tried to add modules kmod-sdhci kmod-sdhci-mt7620, and corresponding dts block. - It will block WAN + 3xLAN ports, only one LAN works. - I'm not sure why, everything else works fine. Signed-off-by: Wang JiaWei <buaawjw@gmail.com>
* kernel: update 4.9 to 4.9.13Ansuel Smith2017-02-271-8/+8
| | | | | | refresh patch 630-packet_socket_type Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: Add TPM Module supportChris Blake2017-02-273-0/+18
| | | | | | | | The following will enable the TPM kernel module, as well as support for the atmel i2c TPM driver. Tested and confirmed working on an Aerohive AP-121 Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ipq806x: sanitize Dni image generationThomas Reifferscheid2017-02-261-4/+3
| | | | | | | | | The more straight forward approach for generating the pure and unpadded kernel file which then can be used for initramfs straight. Build options for factory.img and sysupgrade.tar are handeled seperately. Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
* kernel: enable hwmon-k10temp in the x86/64 kernel config instead of packaging itFelix Fietkau2017-02-261-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: get rid of host.mkFelix Fietkau2017-02-266-6/+0
| | | | | | Defined required host related variables in toplevel.mk instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: mikrotik: erase firmware partition on SPI NOR devices in pre_upgrade()Thibaut VARENE2017-02-261-0/+8
| | | | | | | | | | | | On Mikrotik SPI NOR devices, the firmware partition must be erased when flashing from stock firmware, otherwise leftover bits (in particular a kernel signature) can trigger a boot loop. When booted from initramfs (the only way to flash LEDE on these devices), this patch unconditionally erases the firmware partition in the pre_upgrade() stage for all supported SPI NOR devices. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: include only kmod-mt76-core in EX2700 imageJoseph C. Lehner2017-02-261-0/+1
| | | | | | | This patch frees up flash space on the EX2700, by removing unused mt76 drivers and firmware. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ar71xx: Enable RB2011 TTYArvid E. Picciani2017-02-261-1/+2
| | | | | | Enables TTY on the Mikrotik RouterBoard RB2011*R* Signed-off-by: Arvid E. Picciani <aep@exys.org>
* kernel: update 4.9 to 4.9.12Ansuel Smith2017-02-265-26/+26
| | | | | | | | Refresh generic patch Compiled and tested WRT1900ACS Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* layerscape: add LS1043A Rev1.1 supportYangbo Lu2017-02-2613-0/+1187
| | | | | | | | Backport kernel patches for LS1043A Rev1.1 support from upstream, patchwork, and SDK. And update to latest u-boot to support LS1043A Rev1.1. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* ar71xx: use common firmware partition for WNDAP360Felix Fietkau2017-02-231-2/+2
| | | | | | Patch from https://github.com/openwrt/openwrt/pull/398 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix broadcast packets leaking on the wrong vlan on xrx200Felix Fietkau2017-02-232-10/+12
| | | | | | | | | | | | | | | The ethernet driver uses a port map override via special tag to control the ports on which multicast packets are sent. This was added to work around an issue in the switch that was occasionally leaking packets onto the wrong vlan. Unfortunately the change had some leftover lines that were overwrting the port map with a list of all ports, thus always leaking packets onto the wront vlan. Fix this by only enabling the override with the VLAN port map and only if a matching VLAN port map was actually found Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update kernel 4.4 to 4.4.50Kevin Darbyshire-Bryant2017-02-239-54/+54
| | | | | | | | | | Bump kernel from 4.4.49 to 4.4.50 Compile tested: All targets Run tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* kernel: add missing config symbol for linux 3.18Felix Fietkau2017-02-221-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Enable mtdsplit support for RB SPI NOR devicesThibaut VARENE2017-02-224-32/+17
| | | | | | | | | | | | | | | | | | This patch enables mtdsplit for the MikroTik subtarget. It converts mach-rbspi.c to use a single "firmware" partition. Finally, it converts the SPI NOR profile to metadata images: the original combined-image format is gone, the images are now "standard" sysupgrade images with metadata appended. Note: kernel2minor apparently pads the kernel container to erase-block boundary, but this is undocumented behaviour, so we do not rely on it and call pad-to anyway. Note: in platform.sh, the boards are tested last in platform_check_image() as this should eventually become the "*)" default case when more devices switch to metadata images. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: remove bogus "rb*)" catch-all from platform.shThibaut VARENE2017-02-221-8/+54
| | | | | | This patch replaces a dangerous catch-all with the exhaustive list of devices. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* kernel: mtdsplit: Add support for Mikrotik NOR firmwareThibaut VARENE2017-02-225-0/+125
| | | | | | | | | | | | | | | | The RouterBOOT bootloader does not care where the kernel lives in the SPI flash, all that matters is that the kernel is wrapped in the custom yaffs container as generated by kernel2minor. This container has a fixed signature as follows: 00000000 00 00 00 01 00 00 00 01 ff ff 6b 65 72 6e 65 6c |..........kernel| This patch adds mtdsplit support for identifying that signature and triggering the search for the rootfs. rootfs is expected at EB boundary since we use wget mtd_find_rootfs_from(). We make no use of the yaffs file size field because it contains invalid data in the image generated by kernel2minor. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* Revert "kernel: ar8327/ar8337: disable ARL access code to avoid lockups ↵Stijn Tintel2017-02-221-6/+0
| | | | | | | | | | | (FS#384)" This reverts commit ec1a695daa7390a6c24e3b28d3956f194cba2cb5. Revert the workaround, the problem was properly fixed in 237454991618e0e8b7ceb8a8a2a43fca12c1a454. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ipq806x: fix fakerootfs positionThomas Reifferscheid2017-02-211-2/+2
| | | | | | | | | | | | The fakeroot header is expected by the netgear bootloader in the last 64 bytes of the last block used by the uImage. With the current linux-4.9 uImage being more than 128k smaller than the linux-4.4 uImage the bootloader was unable to locate the rootfs ih_magic and was refusing to load and start the kernel. Fixes: FS#542 Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
* archs38: only calculate entry point address when necessaryFelix Fietkau2017-02-211-5/+2
| | | | | | | $(eval) runs even during prereq check, which can cause bogus error messages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arc770: only calculate entry point address when necessaryFelix Fietkau2017-02-211-5/+2
| | | | | | | $(eval) runs even during prereq check, which can cause bogus error messages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86_64: Add support for EFI framebuffer (FS#515)Alif M. Ahmad2017-02-211-1/+2
| | | | | | | | | | | | | | | CONFIG_FB_EFI and CONFIG_FB_SIMPLE are needed to display console text on EFI framebuffer. CONFIG_FB_EFI is needed when the kernel is directly launched via EFI shell or EFI startup.nsh script. CONFIG_FB_SIMPLE is needed when launching the kernel via grub2 efi. In this case, grub2 has prepared a gfxterm framebuffer and the kernel just need to use the already prepared grub's gfxterm framebuffer to display console text. Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* bcm53xx: add kernel 4.9 configRafał Miłecki2017-02-201-0/+335
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: fix vlan settings for some boardsWeijie Gao2017-02-201-1/+1
| | | | | | | | | | | For AR71XX devices, GMAC1 always connects port 0 of the built-in switch, as the CPU port. This patch sets correct vlan for some devices with wrong settings: a) mark port 0 as CPU port, tagged b) reverse port order, marking these ports untagged Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* ar71xx: Add more boards to the routerboard serial detection patchThibaut VARENE2017-02-201-1/+3
| | | | | | This patch enables serial console on the 435 series and the 953gs. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: add support for TL-WR802N Version 2Thomas Roberts2017-02-2012-2/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TP-Link TL-WR802N Version 2. Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of FLash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to http://192.168.0.1 (default user is "admin" & password is "admin) - Go to "System Tools -> Firmware Upgrade" - Browse for firmware "*.factory-us.bin" or "*.factory-eu.bin" for eu model - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 <Firmware Image Name> - Record the result of "printenv bootcmd" - Enter "erase <Result of 'printenv bootcmd'> +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm <Result of 'printenv bootcmd'>" (e.g bootm 0x9f020000) Signed-off-by: Thomas Roberts <tom.p.roberts@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 16:26:06 +0000