aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ramips: mt7621-dts: fix phy-mode of external phy on GB-PC2Arınç ÜNAL2023-02-031-1/+1
| | | | | | | | | The phy-mode property must be defined on the MAC instead of the PHY. Define phy-mode under gmac1 which the external phy is connected to. Tested-by: Petr Louda <petr.louda@outlook.cz> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit 5155200f97adaeaaac7b752b5a6a5e41cba3db6a)
* octeontx: add sqaushfs and ramdisk to featuresTim Harvey2023-02-031-1/+1
| | | | | | | | Add squashfs and ramdisk to features as these are commonly used images for the octeontx. Signed-off-by: Tim Harvey <tharvey@gateworks.com> (cherry picked from commit af5635e6ca12d3be275560a58ac6e2793e218fcd)
* ath79: add LTE packages for GL-XE300Tom Herbers2023-02-031-1/+2
| | | | | | | | | | | | | | | | | | Add LTE packages required for operating the LTE modems shipped with the GL-XE300. Example configuration for an unauthenticated dual-stack APN: network.wwan0=interface network.wwan0.proto='qmi' network.wwan0.device='/dev/cdc-wdm0' network.wwan0.apn='internet' network.wwan0.auth='none' network.wwan0.delay='10' network.wwan0.pdptype='IPV4V6' Signed-off-by: Tom Herbers <mail@tomherbers.de> (cherry picked from commit 67f283be4430ebfb46be6c00fcc7c12a6adabce3)
* ath79: add label-mac-device for GL-XE300Tom Herbers2023-02-031-0/+4
| | | | | | | | This adds an label-mac-device alias which refrences the mac which is printed on the Label of the device. Signed-off-by: Tom Herbers <mail@tomherbers.de> (cherry picked from commit f83f5f8452edd3115aacf333b0038da89639a218)
* ath79: add LTE led for GL.iNet GL-XE300Leo Soares2023-02-031-0/+1
| | | | | | | | | This commit adds the LTE led for GL.iNet GL-XE300 to the default leds config. Signed-off-by: Leo Soares <leo@hyper.ag> (cherry picked from commit 35a0f2b00c44a43ad087327f0cbdb1c9c5e60c49) Signed-off-by: Tom Herbers <mail@tomherbers.de>
* kernel: backport some mv88e6xxx devlink patchesEtienne Champetier2023-01-313-0/+374
| | | | | | This should help debug mv88e6xxx issues Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kernel: bump 5.10 to 5.10.165John Audia2023-01-288-10/+10
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 257e9fc57cf2c0391f8d99c25e82d75b73695c8a)
* kernel: bump 5.10 to 5.10.164John Audia2023-01-285-7/+7
| | | | | | | | | | | All patches automatically rebased Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 9c3954bc46fce58a0f2dbe8bf6d3f507cfcd1dfb)
* kernel: bump 5.10 to 5.10.163John Audia2023-01-2877-215/+149
| | | | | | | | | | | | | | | | | Removed upstreamed: generic/101-Use-stddefs.h-instead-of-compiler.h.patch[1] bcm27xx/patches-5.10/950-0194-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch All patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.163&id=ddd2bb08bd99b7ee4442fbbe0f9b80236fdd71d2 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 2835df54ab84a8709057df156932497b19cda449)
* kernel: bump 5.10 to 5.10.162John Audia2023-01-281-1/+1
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 2621ddb0bef7f5f8eedc49437dfa23b66e810af6)
* kernel: mtk-bmt: fix usage of _oob_readChuanhong Guo2023-01-251-2/+8
| | | | | | | | | _oob_read returns number of bitflips on success while bbt_nand_read should return 0. Fixes: 2d49e49b18 ("mediatek: bmt: use generic mtd api") Signed-off-by: Chuanhong Guo <gch981213@gmail.com> (cherry picked from commit f183ce35b8ea2fd991ac489fb223b09a1ecb4db0)
* lantiq: xrx200: Fix wifi LED on o2 box 6431Florian Maurer2023-01-202-1/+1
| | | | | | | | Wifi LED did not work using phy0radio, which somehow slipped through in the previous testing Signed-off-by: Florian Maurer <f.maurer@outlook.de> (cherry picked from commit 2e3d1edf59109d6329a00d90b1e953261d602af5)
* lantiq-xrx200: fix wan LED on o2 box 6431Florian Maurer2023-01-061-1/+4
| | | | | | | | | | | | | The WIFI LED already worked for me with the latest openwrt 22.03 version. Wifi LED did not with an older 22.x version (in gluon - there phy0radio did nothing but phy0tpt did show activity the WAN interface has the name "wan" and not "pppoe-wan" on this device fixes #7757 (and FS#2987) Signed-off-by: Florian Maurer <f.maurer@outlook.de> (cherry picked from commit 0820d620123a03b6db6642acb6e950d22ffb030f) Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* uml: fix 5.10 buildChristian Lamparter2023-01-031-0/+32
| | | | | | | | | | | | | | the 5.10 uml build currently breaks with: /usr/bin/ld: arch/um/os-Linux/signal.o: in function `sigusr1_handler': arch/um/os-Linux/signal.c:141: undefined reference to `uml_pm_wake' But there's an upstream fix for this. Backport the fix for now but also let upstream know so it finds its way through the -stable releases. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 8bea5edf89e57c32b98620540a457441f5f8ddeb)
* kernel: Add missing kernel configuration optionsHauke Mehrtens2023-01-035-4/+3
| | | | | | | This fixes compile of the bmips target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit f620eb70f1a10385c33a9833e1c97d8c7fef0093)
* ipq40xx: sysupgrade: allow flashing Linksys factory firmwareTony Ambardar2023-01-011-0/+18
| | | | | | | | | | | | | | | | | | Allow forced flashing of a factory firmware image, after checking for the correct FIT magic header and Linksys board-specific footer. Details of the footer are already described in scripts/linksys-image.sh. This is convenient as it avoids using a TFTP server or OEM GUI, and allows restoring OEM firmware or installing a "breaking" OpenWrt update (e.g DSA migration and kernel repartition) directly from the command line. Devices supported at this time include EA6350v3, EA8300, MR8300 and WHW01. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Wyatt Martin <wawowl@gmail.com> # WHW01 Tested-by: Tony Ambardar <itugrok@yahoo.com> # EA6350v3 Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 6fc334cbdc2b1716786768c545b761b338962b43)
* kernel: remove hack patch, move kirkwood specific kmods to target modules.mkFelix Fietkau2022-12-272-23/+30
| | | | | | | | Tweaking the KCONFIG line of kmod-ata-marvell-sata makes the hack patch unnecessary Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 2e375e9b3148cfdb9b19494a25eebc2fa7b256a3)
* kernel: bump 5.10 to 5.10.161John Audia2022-12-264-4/+4
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 59254010077c9086afee8a8b4c490943d6749065)
* ath79: image: don't depend on other COMPILE targetsAlexander Couzens2022-12-221-1/+1
| | | | | | | | | | A device COMPILE target should not depend on another COMPILE. Otherwise race condition may happen. The loader is very small. Compiling it twice shouldn't have a huge impact. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> (cherry picked from commit 17c6fb1054e3dde8fa573195acaac42a5edf0942)
* sunxi: fix typo in device packages for MarsBoard A10Chukun Pan2022-12-221-2/+2
| | | | | | | | | The kmod prefix for sound-soc-sunxi is missing, fix it. Also add kmod-sound-core as dependence. Fixes: 6a35659 ("sunxi: Added profile for HAOYU Electronics Marsboard A10") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit 7bcf6b54fc819c26fc2cea32c464e87614cc2d26)
* lantiq: vr9: include usb driver for fritz 7430Tony Butler2022-12-221-1/+2
| | | | | | | | | | | Reported by user: missing driver for USB; add to image definition https://github.com/openwrt/openwrt/issues/11326 Resolves: #11326 Signed-off-by: Tony Butler <spudz76@gmail.com> Acked-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit 9a1ab8aa0398f93360bf54d81bcd332cd413c03f)
* generic: add support for EON EN25QX128A spi nor flashChristian Marangi2022-12-162-0/+42
| | | | | | | | | | Add support for EON EN25QX128A spi nor flash with no flags as it does support SFDP parsing. Fixes: #9442 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Tested-by: Szabolcs Hubai <szab.hu@gmail.com> [ramips/mt7621: xiaomi_mi-router-4a-gigabit] (cherry picked from commit d7876daf6552a9f39bd5e0bf50b554e9406ec275)
* kernel: bump 5.10 to 5.10.159John Audia2022-12-156-39/+9
| | | | | | | | | | | | | | | | Removed upstreamed: backport-5.10/888-v6.1-ca8210-Fix-crash-by-zero-initializing-data.patch[1] All patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.159&id=0a8e66e375736ea12c11f0ef238ba2a8efec460b Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 90120a1552ba5e55c4a03aca1920831116ab50a9)
* kernel: bump 5.10 to 5.10.158John Audia2022-12-1511-17/+17
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 6801c460b6a72e324c6fc24bc5c14ff3afceb139)
* kernel: bump 5.10 to 5.10.157John Audia2022-12-1520-50/+56
| | | | | | | | | | | | | | | | Manually rebased: backport-5.10/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch hack-5.10/645-netfilter-connmark-introduce-set-dscpmark.patch Removed upstreamed: pending-5.10/706-netfilter-nf_flow_table-add-missing-locking.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.157&id=b8e494240e69f91517256adcd6fda62d0671772d Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 7b7d8fe60de3fd5d45b7c817aef001cd85ee1533)
* kernel: add symbol in generic config for 5.10.157John Audia2022-12-151-0/+1
| | | | | | | Add CONFIG_INET_TABLE_PERTURB_ORDER=16 to generic config Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit f83a8329a33ee19060c9e28771434309ef55915d)
* kernel: further cleanup of xfrm[4|6]_mode*Martin Schiller2022-12-151-4/+0
| | | | | | | | | | In my commit da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") I missed a few default config options and description entries. Those should be gone as well. Fixes: da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") Signed-off-by: Martin Schiller <ms@dev.tdt.de> (cherry picked from commit 1e028ac51e4d033cc1a8a06850ca8c6469206761)
* kernel: remove handling of xfrm[4|6]_mode_* modulesMartin Schiller2022-12-151-3/+0
| | | | | | | | | | | | | | | | For kernel versions before 5.2, the required IPsec modes have to be enabled explicitly (they are built-in for newer kernels). Commit 1556ed155a9a ("kernel: mode_beet mode_transport mode_tunnel xfram modules") tried to handle this, but it does not really work. Since we don't support these kernel versions anymore and the code is also broken, let's remove it. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [Remove old generic config options too] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit da5c45f4d8864a82378b4a04c0516cb98a718cfa)
* kernel: remove CONFIG_MMC_BLOCK_BOUNCETomas Lara2022-12-151-1/+0
| | | | | | | | CONFIG_MMC_BLOCK_BOUNCE was removed in kernel v4.13-rc1 https://github.com/torvalds/linux/commit/c3dccb74be28a345a2ebcc224e41b774529b8b8f Signed-off-by: Tomas Lara <tl849670@gmail.com> (cherry picked from commit 24307b035143bc710268590850e595e1fad86f08)
* ath79: fix Teltonika RUT230 v1 MAC assignmentDavid Bauer2022-12-121-2/+2
| | | | | | | | | | The MAC-Address setup for the Teltonika RUT230 v1 was swapped for the LAN / WAN ports. Also the Label-MAC was assigned incorrect, as the WiFi MAC is printed on the case as part of the SSID, however only the LAN MAC-Address is designated as a MAC-Address. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 4c0919839d77ca33a6305116e2ff67234fb07514)
* ramips: add support for Wavlink WS-WN572HP3 4GJan-Niklas Burfeind2022-12-093-0/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wavlink WS-WN572HP3 4G is an 802.11ac dual-band outdoor router with LTE support. Specifications; * Soc: MT7621DAT * RAM: 128MiB * Flash: NOR 16MiB GD-25Q128ESIG3 * Wi-Fi: * MT7613BEN: 5GHz * MT7603EN: 2.4GHz * Ethernet: 2x 1GbE * USB: None - only used internally * LTE Modem: Quectel EC200T-EU * UART: 115200 baud * LEDs: * 7 blue at the front * 1 Power * 2 LAN / WAN * 1 Status * 3 RSSI (annotated 4G) * 1 green at the bottom (4G LED) * Buttons: 1 reset button Installation: * press and hold the reset button while powering on the device * keep it pressed for ten seconds * connect to 192.168.10.1 via webbrowser (chromium/chrome works, at least Firefox 106.0.3 does not) * upload the sysupgrade image, confirm the checksum, wait 2 minutes until the device reboots Revert to stock firmware: * same as installation but use the recovery image for WL-WN572HP3 Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit dce66899bf243d78689afcc693340b891bbf4c2d)
* realtek: update GPIO bindings for DGS-1210-10PJan-Niklas Burfeind2022-12-091-4/+26
| | | | | | | | | | | | | | | | | add three missing LEDs - PoE-Max - Link/Act - PoE add two missing buttons - mode - reset The last was dropped in commit 61a3d0075b15 ("realtek: update GPIO bindings in the dts files in dts-5.10") Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> (cherry picked from commit dbc93d280c9d05733e7b45a76ec1a05b77c376a5)
* ramips: mt7621: enable lzma-loader for ZyXEL WAP6805Bjørn Mork2022-12-061-1/+2
| | | | | | | | Fixing "Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover". Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 8719f73fa2beddb259013801ca912b96fbc83543)
* ramips: mt7621: enable lzma-loader for netis WF2881Joonhyuk Song2022-12-061-1/+2
| | | | | | | Fixes boot loader LZMA decompression issues (LZMA ERROR 1) Signed-off-by: Joonhyuk Song <thenoface303@gmail.com> (cherry picked from commit 25ede5170d5fbfd233ba21f7a294ec3a2ddeb635)
* kernel: ca8210: Fix crash by zero initializing dataHauke Mehrtens2022-12-061-0/+30
| | | | | | | This fixes crashes at bootup on pistachio. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 48025b8ac9c62ead241ea1daf1092993fb94aeac)
* bcm4908: Refresh kernel patchesHauke Mehrtens2022-12-061-24/+2430
| | | | | | | | | | Refresh the kernel patches for this target. No manual changes. Fixes: 45ac906c641 ("bcm4908: update DTS files with the latest changes") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit b97e5ac785960c13199239dd4821dd53f3801da3) [ dropped 5.15 change not present in 22.03 ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mvebu: disable also wrt32x due to broken switchHannu Nyman2022-12-061-1/+0
| | | | | | | | | | | | | | | | | | | | WRT32x has identical hardware as WRT3200ACM, so handle the devices identically. Reference to: * FCC approval: WRT32x is a new name for WRT3200ACM hardware https://fccid.io/Q87-WRT3200ACM#Grant-TCB-5 FCC IDENTIFIER: | Q87-WRT3200ACM C2PC: - Adding a new model name: WRT32X; * Linux switch definition: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=2716777b4f21649fb907b4a4fb96e1c8d0a5ec16 MV88E6176 is mostly compatible to MV88E6352 and is documented in the same functional specification. Add support for it. Fixes: a0bae2fef8 "mvebu: cortexa9: disable devices using broken mv88e6176 switch" Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* mvebu: cortexa9: disable devices using broken mv88e6176 switchPetr Štetiar2022-12-051-0/+4
| | | | | | | | | | | | | | | | | | | Several users have reported, that devices using mv88e6176 switch are seriously broken, basically turning that switch into a hub. Until fixed those devices should be disabled. I've used TOH with "Switch 88E6176" filter, which provided me with the following list of likely affected devices: * Linksys WRT1200AC v1/v2, WRT1900AC v1/v2 * SolidRun ClearFog Pro * Turris Omnia That device list more or less corresponds with the list of devices mentioned in the linked bug reports. References: https://github.com/openwrt/openwrt/issues/11077 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: expand rootfs for DIR-825-B1 with unused spaceAlan Luck2022-12-031-6/+21
| | | | | | | | | | | Expand currently unused flash space to roofs for DIR-825-B1 by using the same flash space as the old ar71xx big image without moving the caldata. With some testing this partition is use by the OEM firmware but if changed is regenerated which allows reverting to OEM firmware Signed-off-by: Alan Luck <luckyhome2008@gmail.com> (cherry picked from commit aca8bb5cc332f0ffdf4249e76b0a56716f98bef0)
* kernel: update U-Boot nvmem driver to v6.2 release versionRafał Miłecki2022-12-013-0/+168
| | | | | | | | | | Backport queued patches that 1. Fix CRC32 calculation for redundant images 2. Fix CRC32 on big-endian 3. Fix parting images with Broadcom header Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 797177ad85cbf92b5c1e270751eaca9eb4f34f30)
* bcm4908: update DTS files with the latest changesRafał Miłecki2022-12-018-8/+298
| | | | | | | | The most affecting change is move of files from bcm4908/ to the bcmbca/. That required updating few paths. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 45ac906c6415cebd12281088da6b06668c057f0a)
* bcm4908: fix Asus GT-AX6000 imageRafał Miłecki2022-12-014-3/+66
| | | | | | | | 1. Include Linux DTB 2. Add 50991 variant (seems to differ by 1 PHY we don't support yet) Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit b8f8c6f2dd8d47216117cb5b78184531ab21dddd)
* bcm4908: use upstream patches for Asus GT-AC5300 LEDsRafał Miłecki2022-12-013-3/+12
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d51e990ff81ad0335294749e8d2fc8e69ceb9179)
* layerscape: Fix SPI-NOR issues with vendor patchesPawel Dembicki2022-11-294-0/+130
| | | | | | | | | | | | | | | | | | | | | For some reason LS1012A and LS1046A devboards don't work well with Spansion SPI NOR flash. It cause read and write errors like: [ 27.285887] jffs2: Newly-erased block contained word 0xc20031985 at offset 0x025ae000 [ 27.468922] jffs2: Newly-erased block contained word 0x0 at offset 0x02573000 [ 27.502615] jffs2: Newly-erased block contained word 0xe723f41e5823f110 at offset 0x02572000 [ 27.541550] jffs2: Newly-erased block contained word 0x1a7d266ee6 at offset 0x02571000 [ 27.577195] jffs2: Newly-erased block contained word 0x5d000bae8d52fec6 at offset 0x02570000 [ 27.611800] jffs2: Newly-erased block contained word 0x63515aee63515a4b at offset 0x0256f000 [ 27.651749] jffs2: Newly-erased block contained word 0xc20031985 at offset 0x0256e000 [ 27.825593] jffs2: Newly-erased block contained word 0xc20031985 at offset 0x0252e000 NXP have found workarround and applied in their vendor kernel version. They force 1x tx and 1x rx lines in qspi. That method fix issues. This patch ports patches from NXP LSDK tree. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (cherry picked from commit 2e4fe289ceb02139e6f1cf8dcae31ad14efba52c)
* ipq40xx: luma_wrtq-acn329: swap ethernet MAC addressesTomasz Maciej Nowak2022-11-271-0/+5
| | | | | | | Adjust them according to OEM firmware. Fixes: e24635710c7e (" ipq40xx: add support for Luma Home WRTQ-329ACN") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: mikrotik: use OpenWrt loader for initram imageJohn Thomson2022-11-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Return to using the OpenWrt kernel loader to decompress and load kernel initram image. Continue to use the vmlinuz kernel for squashfs. Mikrotik's bootloader RouterBOOT on some ath79 devices is failing to boot the current initram, due to the size of the initram image. On the ath79 wAP-ac: a 5.7MiB initram image would fail to boot After this change: a 6.6MiB initram image successfully loads This partially reverts commit e91344776b9ba7c864be88d915c9c0df0eb790dd. An alternative of using RouterBOOT's capability of loading an initrd ELF section was investigated, but the OpenWrt kernel loader allows larger image. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> (cherry picked from commit 62b72eafe49d2eecd3692691152ed86a0327fcb0) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Fixes: #9954
* ath79: fix MAC address assigment for TP-Link TL-WR740N/TL-WR741ND v4Will Moss2022-11-271-3/+2
| | | | | | | | On TP-Link TL-WR740N/TL-WR741ND v4 LAN MAC address (eth1 in DTS) is main device MAC address, so do not increment it. WAN MAC is LAN MAC + 1. Signed-off-by: Will Moss <willormos@gmail.com> (cherry picked from commit 288b0004bfa981e3dbb8678ee3289509c3930217)
* ath79: D-Link DIR-825 B1 add factory.bin recipeWill Moss2022-11-271-4/+6
| | | | | | | | | | | - Bring back factory.bin image which was missing after porting device to ath79 target - Use default sysupgrade.bin image recipe - Adjust max image size according to new firmware partition size after "ath79: expand rootfs for DIR-825-B1 with unused space (aca8bb5)" changes - Remove support of upgrading from version 19.07, because partition size changes mentioned above Signed-off-by: Will Moss <willormos@gmail.com> (cherry picked from commit a58146d452c50387256d4a616c055ddf3248496f)
* ath79: disable image building for Ubiquiti EdgeSwitch 8XPRoger Pueyo Centelles2022-11-271-0/+1
| | | | | | | | | | | The downstream OpenWrt driver for the BCM53128 switch ceased to work, rendering the 8 LAN ports of the device unusable. This commit disables image building while the problem is being solved. See issue #10374 for more details. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit 5a1d7d8c1b422827673b13a034473683f5af3d6f)
* lantiq: add 6.1 tag to upstream patchAleksander Jan Bajkowski2022-11-271-2/+3
| | | | | | | | Add 6.1 tag to upstream patch now that 6.1 got tagged. This permits to track patch in a better way and directly drop them on kernel bump. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit 802ca492d85e6f6af05676518889d4de50697477)