aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Expand)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.76Rui Salvaterra2021-10-3025-133/+43
* ipq40xx: detangle ath10k-board-qca4019 from ath10k-firmware-qca4019*Christian Lamparter2021-10-301-1/+1
* ath9k: OF: qca,disable-(2|5)ghz => ieee80211-freq-limitChristian Lamparter2021-10-306-8/+8
* realtek: re-enable IPv6 routingBjørn Mork2021-10-301-1/+1
* realtek: fix ZyXEL initramfs image generationBjørn Mork2021-10-301-2/+2
* bcm53xx: MR32: replace i2c-gpio with SoC's i2cChristian Lamparter2021-10-303-1/+118
* sunxi: deselect CONFIG_VIDEO_SUN6I_CSI by defaultDaniel Golle2021-10-291-0/+1
* sunxi: add CONFIG_ARM_CRYPTO Kconfig symbolDaniel Golle2021-10-291-0/+1
* sunxi: add yet another missing Kconfig symbolDaniel Golle2021-10-291-0/+1
* bcm53xx: backport patch fixing pinctrl driverRafał Miłecki2021-10-292-33/+106
* sunxi: add missing CONFIG_VIDEO_SUN4I_CSI Kconfig symbolDaniel Golle2021-10-291-0/+1
* mediatek: make sure MMC is not busy before commencing sysupgradeDaniel Golle2021-10-282-0/+2
* ipq806x: add support for Netgear Nighthawk Pro Gaming XR500Peter Geis2021-10-269-448/+545
* ramips: minew g1-c: Allow dynamic RAM sizesBruno Randolf2021-10-261-5/+0
* sunxi: switch to Kernel 5.10Paul Spooren2021-10-251-2/+2
* kernel: Add extra configuration optionsHauke Mehrtens2021-10-242-1/+7
* at91: add support for sam9x60-ek boardClaudiu Beznea2021-10-241-2/+11
* at91: enable kernel config for sam9x60Claudiu Beznea2021-10-241-2/+27
* at91: add support for sama5d27-wlsom1-ek boardClaudiu Beznea2021-10-241-0/+11
* at91: add support for sama5d2 icp boardClaudiu Beznea2021-10-241-0/+11
* at91: enable specific sam9x kernel config flagsClaudiu Beznea2021-10-241-6/+106
* at91: kernel: bump to 5.10Claudiu Beznea2021-10-2414-779/+109
* sunxi: 5.10: enable sun8i-thermalChukun Pan2021-10-242-1/+2
* kernel: 5.10: qca8k: backport qca8k_setup tidy-upMatthew Hagan2021-10-241-0/+151
* kernel: 5.10: backport qca8k cpu_port_index fix in parse_port_configMatthew Hagan2021-10-241-0/+28
* kernel: 5.10: backport qca8k feature additionsMatthew Hagan2021-10-2416-0/+1991
* kernel: 5.10: backport QCA83x PHY resume fix, DAC amplitude preferred master,...Matthew Hagan2021-10-245-2/+378
* kernel: 5.10: backport at803x QCA83xx phy support improvementsMatthew Hagan2021-10-244-2/+207
* kernel: 5.10: backport at803x internal QCA8327 PHY supportMatthew Hagan2021-10-241-0/+48
* kernel: 5.10: backport qca8k legacy mdio mapping panic fixMatthew Hagan2021-10-241-0/+80
* kernel: 5.10: backport additional qca8k fixesMatthew Hagan2021-10-245-0/+537
* kernel: 5.10: backport qca8k stability improvementsMatthew Hagan2021-10-2426-5/+2660
* kernel: 5.10: silence bogus "Missing #address-cells in interrupt provider" wa...Christian Lamparter2021-10-241-0/+28
* ath79: ag71xx: Disable napi related interrupts during probeSven Eckelmann2021-10-231-0/+6
* kernel: backport GPIO LED patch for MT7530Rosen Penev2021-10-232-3/+184
* ipq40xx: MR33: Fix LP5562 LED driver probeTan Zien2021-10-231-4/+15
* layerscape: Fix build in dtbHauke Mehrtens2021-10-2223-64/+37
* apm821xx: WNDAP6X0: add missed uci-default for compatChristian Lamparter2021-10-221-1/+3
* apm821xx: implement new LED label naming schemeChristian Lamparter2021-10-2210-122/+273
* ath79: lzma-loader: fix & re-enable per-board CONFIG_BOARD_DEVChristian Lamparter2021-10-221-2/+5
* apm821xx: MX60(W): re-enable + allow bigger future kernelsChristian Lamparter2021-10-222-8/+16
* apm821xx: MBL: HDD regulators overhaul for MBL DUOChristian Lamparter2021-10-221-2/+6
* ath79: mikrotik: use 64 KiB SPI NOR erase sectorsRoger Pueyo Centelles2021-10-221-1/+0
* bcm53xx: bridge all LAN ports on Linksys EA9500Rafał Miłecki2021-10-221-1/+1
* bcm53xx: switch to the upstream DSA-based b53 driverRafał Miłecki2021-10-215-77/+49
* bcm47xx: add kernel 5.10 supportRafał Miłecki2021-10-2121-1/+2295
* ath79: use correct USB package for DIR-505David Bauer2021-10-211-1/+1
* kernel: 5.10: backport Marvell 88E1510/2 PHY SFP supportRobert Marko2021-10-212-0/+710
* kernel: 5.10: backport 100 BaseX SFP supportRobert Marko2021-10-213-1/+97
* kernel: bump 5.10 to 5.10.75Rui Salvaterra2021-10-2117-65/+22