aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* rtl838x: fine tune default package setPetr Štetiar2020-11-091-1/+2
| | | | | | | | | Althought most of the switches aren't routers, they can be used as such, so let's add some of the packages from the router's DEVICE_TYPE. While at it, remove swconfig package which is not needed on DSA targets. Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* rtl838x: dts: use macros for phy and switch definitionsPetr Štetiar2020-11-095-719/+170
| | | | | | | It's quite more readable, saves some tedious copy&pasting, not so error prone etc. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* rtl838x: rtl838x.dtsi: fix missing interrupt-parent for uart0Petr Štetiar2020-11-091-0/+2
| | | | | | | | Fixes following dtc warning: Warning (interrupts_property): /uart@b8002000: Missing interrupt-parent Signed-off-by: Petr Štetiar <ynezz@true.cz>
* rtl838x: rtl838x.dtsi: remove reg property from root nodePetr Štetiar2020-11-091-1/+0
| | | | | | | | Fixes following dtc warning: ../dts/rtl838x.dtsi:38.3-145.3: Warning (reg_format): /: Root node has a "reg" property Signed-off-by: Petr Štetiar <ynezz@true.cz>
* rtl838x: add support for D-Link DGS-1210-28Petr Štetiar2020-11-092-0/+344
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification ---------------------- * RTL8382M SoC, 1 MIPS 4KEc core @ 500MHz * 128MB DRAM * 32MB NOR Flash (MX25L25635E) * 24 x 10/100/1000BASE-T ports - Internal PHY with 8 ports (RTL8218B) - Two external PHYs with 8 ports each (RTL8218B) * 4 x Gigabit RJ45/SFP Combo ports - External PHY with 4 SFP ports (RTL8214FC) * Power LED * Reset button on front panel * UART (115200 8N1) via unpopulated standard 0.1" pin header marked J6 UART pinout ----------- [oooo]J3 [o]ooo|J6 | ^ ||`------ GND | | |`------- RX | | `-------- TX | `---------- Vcc (3V3) | `------------------ J3 is power input connector nearby J6 UART Boot initramfs image from U-Boot -------------------------------- 1. Press Escape key during `Hit Esc key to stop autoboot` prompt 2. Press CTRL+C keys to get into real U-Boot prompt 3. Init network with `rtk network on` command 4. Load image with `tftpboot 0x8f000000 openwrt-rtl838x-generic-d-link_dgs-1210-28-initramfs-kernel.bin` command 5. Boot the image with `bootm` command To install, upload the sysupgrade image to the OEM webpage or sysupgrade from the system running from initramfs image. It has been developed and tested on device with F1 revision. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* rtl838x: d-link_dgs-1210: refactor common family bitsPetr Štetiar2020-11-094-86/+97
| | | | | | | | So the common bits can be easily shared with other boards in the family and while at it add missing SPDX license identifiers into the DTS files and fixed alphabetic sorting of the devices in the images. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* rtl838x: clean whitespace issues in rtl8382_d-link_dgs-1210-16.dtsPetr Štetiar2020-11-091-4/+3
| | | | | | So it's tidy. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* octeon: add support for Ubiquiti EdgeRouter 4Roman Kuzmitskii2020-11-059-6/+647
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ubiquiti EdgeRouter 4 is 4 port Octeon Cavium 7130 powered router. It has internal power supply and needs c13 power cord. There are three 10/100/1000 Mbps RJ45/Copper ports and one 1000 Mbps SFP port connected directly to a SoC. SoC: Octeon Cavium 7130 (Cavium 3) Clocked at 1000Mhz Memory: 1 GiB (SK hynix H5TQ4G63CFR-RDC × 2) DDR3, clocked at 533 Mhz (1066Mhz effective) Flash: - mtd: 8 MiB (Macronix MX25L6408EMI-12G) used for uboot/eeprom - emmc: 4 GiB (SanDisk SDIN7DP2-4G) used for kernel+rootfs Leds: 1x for power status (white/blue, controllable) and 4x for ethernet and sfp ports (no control over them) Buttons: 1x Reset (from SOC) Serial: 1x RJ45 port on front panel. 115200 baud, 8N1 (from SoC) USB: 1x USB3.0 on front panel (from SoC) MII: 1x QSGMII from SoC is used PHY: 1x Vitesse VSC8504 of which 4x ports is used All physical port numbers are properly mapped inside OS and named by lanX instead of ethX. There is also special purpose four(4) loopX ports available. That loopX ports are currently hardcoded by linux kernel and exact use case of them is currently unknown. We leave them to the linux kernel and octeon board defaults. All four (4) physical ports are connected to the same QSGMII. vsc8504 is used for phys and only 4, 5, 6 and 7 phys are used. Phy mapping: - Phy5 is connected to physical eth0 port - Phy6 is connected to physical eth1 port - Phy7 is connected to physical eth2 port - Phy4 is connected to physical eth3 port Why this device needs external dts: - faster boot time since need to initialize less device tree nodes. - to add actual indication with LED about boot/failure/upgrade. i.e. user could know when to enter failsafe mode or if upgrade is done - reset button support so user can reset their device in case off failure - sfp port indication in dmesg with information about sfp module it also indicates when module inserted or removed Octeon quirks: - There is no port status available before it interface brought up - SFP port can not be tied to actual phy due to octeon-ethernet state and currently we can only get reports a about SFP state in dmesg How to flash the firmware: - copy openwrt-octeon-ubnt_edgerouter-4-initramfs-kernel.bin and openwrt-octeon-ubnt_edgerouter-4-squashfs-sysupgrade.tar to USB flash drive that is formatted to vfat/fat32 - connect USB flash drive to edgerouter 4 front USB port - connect serial cable using front RJ45 port (115200 baud, 8N1) - connect power to cable to edgerouter 4 - connect terminal to the console to see uboot boot process - interrupt boot by pressing button(s) on your keyboard to log in to the uboot - detect usb connected flash drives by typing to the console: usb start - after drive is detected load initramfs+kernel to the memory by typing: fatload usb 0:1 0x20000000 openwrt-octeon-ubnt_edgerouter-4-initramfs-kernel.bin - after initramfs+kernel is loaded to the memory load it by typing: bootoctlinux 0 numcores=4 endbootargs mem=0 - boot process should finish and you will be greeted with console after pressing enter - create directory to mount usb flash drive to by typing: mkdir /tmp/sda - mount flash drive to that directory by typing: mount /dev/sda1 /tmp/sda - flash firmware to router internal storage by typing: sysupgrade /tmp/sda/openwrt-octeon-ubnt_edgerouter-4-squashfs-sysupgrade.tar - device will reboot and after it gets up you will have edgerouter 4 running openwrt Reviewed-by: Johannes Kimmel <fff@bareminimum.eu> Tested-by: Johannes Kimmel <fff@bareminimum.eu> Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
* octeon: honor disabled sgmii device tree nodesRoman Kuzmitskii2020-11-051-0/+27
| | | | | | | | | | | | adds patch to octeon ethernet driver that lets sgmii interface device tree node to be disabled and that disabled interface won't be unnecessarily initialized. It solves the problem with octeon boards that have 8 sgmii or more ports initialized but have nothing connected to them. Tested-by: Johannes Kimmel <fff@bareminimum.eu> Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
* octeon: implement interface rename by label from device treeRoman Kuzmitskii2020-11-051-0/+38
| | | | | | | | adds patch to octeon ethernet driver that to rename interface name by label from device tree Tested-by: Johannes Kimmel <fff@bareminimum.eu> Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
* generic: add support for vsc8504 phyRoman Kuzmitskii2020-11-051-0/+57
| | | | | | | | | | adds support for vsc8504 phy. patch have use on 5.4 kernel and has to be dropped after since phy is supported by CONFIG_MICROSEMI_PHY on newer LTS kernels. Tested-by: Johannes Kimmel <fff@bareminimum.eu> Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
* ath79: streamline image-generation for OCEDO boardsDavid Bauer2020-11-051-6/+0
| | | | | | | | Use the default sysupgrade generation procedure provided by the target. The previously generated images had the rootfs not aligned to an eraseblock. Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: remove unused config symbolsDavid Bauer2020-11-041-2/+0
| | | | | | | | Remove MDIO and I2C bitbangig support from the kernel. These functionalities are currently not used by any board in the target. Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: fix NanoPi R2S GMAC clock nameDavid Bauer2020-11-041-0/+27
| | | | | | | | | | This commit fixes the name for the GMAC clock to gmac_clkin, as this is the name of the clock provided by the rk3328-clk driver. Without this commit, the GMAC will not work in TX direction. Suggested-by: Tobias Waldvogel <tobias.waldvogel@gmail.com> Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: fix kernel oops in `mt7621_nfc_write_page_hwecc`Anton Ryzhov2020-11-041-4/+6
| | | | | | | | | | `mt7621_nfc_write_page_hwecc` may be called with `buf=NULL`, but `mt7621_nfc_check_empty_page` always tries to read it. That caused Oops: `Unable to handle kernel paging request at virtual address 00000000` Fixes: FS#3416 Signed-off-by: Anton Ryzhov <anton@ryzhov.me>
* ath79: remove redundant setup of wmac for ubnt WA devicesAdrian Schmutzler2020-11-033-18/+0
| | | | | | | | | | | Several Ubiquiti WA devices set up &wmac again in their DTS files, although this is already done in ar9342_ubnt_wa.dtsi. Fixes: fa3c2676ab0c ("ath79: Add support for Ubiquiti Nanostation AC") Fixes: cf5a1abe46fc ("ath79: define 2.4GHz radio for nanostation ac loco") Fixes: 09804da80a99 ("ath79: define 2.4GHz radio for litebeam ac gen2") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: create DTSI files for ubnt WA 1-/2-port devicesNick Hainke2020-11-038-176/+76
| | | | | | | | | | The ar9342 Ubiquiti WA devices appear to only have two different network setups, based on the number of ethernet ports. Create DTSI files for them to consolidate duplicate definitions. Signed-off-by: Nick Hainke <vincent@systemli.org> [rephrase commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix nanobeam ac ethernet interfaceNick Hainke2020-11-031-3/+2
| | | | | | | | | | | | | | | | | | | | | | In 4.14 the delays were not cleared, so setting "rgmii" as phy-mode did not affect delays set by the bootloader. With 5.4 kernel the situation changed and the ethernet interface stopped working. "rgmii" requires rx and tx delays depending on the hardware circuit and wiring. The mac or the phy can add these delays. - "rgmii": delays are controlled by the mac - "rgmii-id": delays are controlled by the phy More Information in Linux Kernel Tree: Documentation/devicetree/bindings/net/ethernet-controller.yaml "rgmii" should be the preferred mode, which allows the mac layer to turn off the dealys completely if they are not needed. However, the delays are not set correctly, which causes the ethernet interface to be broken. Just taking the ethernetpart from the litebeam ac gen2 will fix the issue. Explained-by: David Bauer <mail@david-bauer.net> Signed-off-by: Nick Hainke <vincent@systemli.org>
* rtl838x: remove the swconfig setup from the board.d codeJohn Crispin2020-11-031-49/+3
| | | | | | the code currently sets up uci for swconfig which we do not use. Signed-off-by: John Crispin <john@phrozen.org>
* kernel: add disabled CONFIG_IP6_NF_TARGET_MASQUERADEAdrian Schmutzler2020-11-021-0/+1
| | | | | | | | | | | | | | | | | | | In kernel commit adf82accc5f5 ("netfilter: x_tables: merge ip and ipv6 masquerade modules") the config symbols IP_NF_TARGET_MASQUERADE and IP6_NF_TARGET_MASQUERADE have been demoted to simple backwards- compat options for NETFILTER_XT_TARGET_MASQUERADE. In netfilter.mk, this has already been updated in OpenWrt commit d1592306cc07 ("netfilter.mk: use CONFIG_NETFILTER_XT_TARGET_MASQUERADE"), having us use the new config symbol. However, enabling IP_NF_NAT or IP6_NF_NAT still makes the relevant legacy options selectable, so we need to disable them in generic config (and forget about them afterwards). Since CONFIG_IP_NF_TARGET_MASQUERADE is already present there, this just adds the missing CONFIG_IP6_NF_TARGET_MASQUERADE. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: drop obsolete symbol CONFIG_NF_NAT_IPV6Adrian Schmutzler2020-11-021-1/+0
| | | | | | | | | | | Kernel has removed the symbols CONFIG_NF_NAT_IPV4 and CONFIG_NF_NAT_IPV6 in favor of CONFIG_NF_NAT in commit 3bf195ae6037 ("netfilter: nat: merge nf_nat_ipv4,6 into nat core"). This drops the obsolete symbol CONFIG_NF_NAT_IPV6 from generic config-5.4. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: ubnt-unifi: make u-boot-env partition read-onlyLech Perczak2020-11-021-0/+1
| | | | | | | | | This partition isn't normally modified during boot process. Make it read-only to prevent accidental overwrite. If needed this can be overriden with installing kmod-mtd-rw; the same way as for installing modified U-boot. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: ubnt-xm: make u-boot-env partition read-onlyLech Perczak2020-11-021-0/+1
| | | | | | | | | This partition isn't normally modified during boot process. Make it read-only to prevent accidental overwrite. If needed this can be overriden with installing kmod-mtd-rw; the same way as for installing modified U-boot. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: bump 5.4 to 5.4.74John Audia2020-11-0210-124/+18
| | | | | | | | | | | | | | | | | | | Removed upstreamed patches: mvebu/patches-5.4 409-phy-marvell-comphy-Convert-internal-SMCC-firmware-re.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86_64 Run-tested: ipq806x/R7800, x86_64, lantiq/Easybox 904 xDSL No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64 build/run] [added lantiq test report] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* x86: fix touching bootloader "upgraded" markYousong Zhou2020-11-021-1/+1
| | | | | | | | | | | | | | The mount point is "/tmp/boot", the path in the boot partition is "/boot/grub/upgraded". Origin of this mark b9c1cf16 ("x86: add preinit hook for bootloader upgrade") Fixes 32f675ca ("x86: fix grub-bios-setup fail during sysupgrade") Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3140 Reported-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ipq40xx: enable RX hash / CTAG TX offloading for single-phyDavid Bauer2020-11-011-0/+9
| | | | | | | | | | | | This re-enables offloading features disabled by commit 9da2b567605b ("ipq40xx: fix ethernet vlan double tagging"). Single-PHY devices use port-based VLANs on the switch, therefore no S-TAG magic is involved here. Re-enabling these features restores throughput back to 950 Mbit/s. Reported-by: Jannis Pinter <jannis@pinterjann.is> Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: use correct firmware name for UniFi APDavid Bauer2020-11-011-3/+3
| | | | | | | | | The Ubiquiti UniFi AP does not have a AHB connected radio but a PCI one. Also the EEPROM ist only 0x440 bytes of length. Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net> Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net> Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: remove AT803X config symbol from subtargetsDavid Bauer2020-11-012-2/+0
| | | | | | | The AT803X_PHY kernel config symbol is already enabled target-wide. SO it does not have to be enabled for individual subtargets. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: drop upstreamed patchDavid Bauer2020-11-011-24/+0
| | | | | | | | | | | Patch was upstreamed a long time ago (over 2 years) as commit a08227a206b8d ("MIPS: ath79: select the PINCTRL subsystem"). When porting this patch to a newer kernel, nobody noticed we now patch a Broadcom platform. This is clearly not intended. So drop this patch and pretend nothing ever happened. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 5.4 to 5.4.73John Audia2020-11-01114-405/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed patches: generic/pending-5.4 445-mtd-spinand-gigadevice-Only-one-dummy-byte-in-QUA.patch 446-mtd-spinand-gigadevice-Add-QE-Bit.patch pistachio/patches-5.4 150-pwm-img-Fix-null-pointer-access-in-probe.patch Manually rebased: layerscape/patches-5.4 801-audio-0011-Revert-ASoC-fsl_sai-add-of_match-data.patch 801-audio-0039-MLK-16224-6-ASoC-fsl_sai-fix-DSD-suspend-resume.patch 801-audio-0073-MLK-21957-3-ASoC-fsl_sai-add-bitcount-and-timestamp-.patch 820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, mvebu (mamba, rango), x86_64, ramips/mt7621 Run-tested: ipq806x/R7800, mvebu (mamba, rango), x86_64, ramips (RT-AC57U) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [alter 820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: remove obsolete kernel version switches for 4.19Adrian Schmutzler2020-10-3010-272/+2
| | | | | | | This removes unneeded kernel version switches from the targets after kernel 4.19 has been dropped. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: remove support for kernel 4.19Adrian Schmutzler2020-10-30526-104563/+0
| | | | | | | We use 5.4 on all targets by default, and 4.19 has never been released in a stable version. There is no reason to keep it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: disable edgerouter imageJohannes Kimmel2020-10-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | This patch disables the image for edgerouter devices by default, since it isn't able to boot at the moment. Currently the edgerouter image won't boot. Current kernels have an option CONFIG_CAVIUM_CN63XXP1 that needs to be enabled for this chip. If the kernel was compiled without this option, following message is displayed and the machine reboots: [ 36.778028] Kernel panic - not syncing: OCTEON II DCache prefetch workaround not in place (cfa0000c). [ 36.778028] Please build kernel with proper options (CONFIG_CAVIUM_CN63XXP1). [ 36.794398] Rebooting in 1 seconds.. This was last confirmed on 2020-10-29. The description of this option states, that enabling it will possibly cause performance issues on other chips. Signed-off-by: Johannes Kimmel <fff@bareminimum.eu>
* kernel: move kmod-i2c-bcm-iproc to I2C menuDaniel Golle2020-10-301-1/+1
| | | | | | | | A typo resulted in that module having it's own menu. Move it into the I2C menu as it was most likely intended. Fixes: 1291274335 ("kernel: package bcm53xx i2c module") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: mikrotik: use vmlinuz (zBoot ELF)John Thomson2020-10-292-3/+5
| | | | | | | | | | | - minimal built initramfs: 10MB vmlinux ELF -> 6MB vmlinuz - ~5 seconds for kernel decompression, which was equivalent to the additional time to load the uncompressed ELF from SPI NOR. - Removes requirement for lzma-loader, which may have been causing some image builds to fail to boot on Mikrotik mt7621. Suggested-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* mt7621: mikrotik: use vmlinuz (zBoot ELF)John Thomson2020-10-292-2/+5
| | | | | | | | | | | | - minimal built initramfs: 11MB vmlinux ELF -> 4.5MB vmlinuz - ~5 seconds for kernel decompression, which was equivalent to the additional time to load the uncompressed ELF from SPI NOR. - Removes requirement for lzma-loader, which may have been causing some image builds to fail to boot on Mikrotik mt7621. Fixes: FS#3354 Suggested-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* kernel: mips: zboot: put appended dtb into a sectionChuanhong Guo2020-10-291-0/+36
| | | | | | | | | | | | This will make a separated section for dtb appear in ELF, and we can then use objcopy to patch a dtb into vmlinuz when RAW_APPENDED_DTB is set in kernel config. command to patch a dtb: objcopy --set-section-flags=.appended_dtb=alloc,contents \ --update-section=.appended_dtb=<target>.dtb vmlinuz vmlinuz-dtb Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: add linux zboot supportChuanhong Guo2020-10-291-0/+26
| | | | | | | | linux-mips has zboot code which can create a self-extracting kernel image. This allows enabling kernel zboot support for ramips targets. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: add support for Wavlink WL-WN530HG4Nuno Goncalves2020-10-273-2/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | Same hardware as Phicomm K2G but different flash layout. Specification: - SoC: MediaTek MT7620A - Flash: 8 MB - RAM: 64 MB - Ethernet: 4 FE ports and 1 GE port (RTL8211F on port 5) - Wireless radio: MT7620 for 2.4G and MT7612E for 5G, both equipped with external PA. - UART: 1 x UART on PCB - 57600 8N1 Flash instruction: To avoid requiring UART for TFTP a dual flash procedure is suggested to install the squashfs image: 1. Rename openwrt-ramips-mt7620-wavlink_wl-wn530hg4-initramfs-kernel.bin to WN530HG4-WAVLINK. 2. Flash this file with the factory web interface. 3. With OpenWRT now running use standard sysupgrade to install the squashfs image. Signed-off-by: Nuno Goncalves <nunojpg@gmail.com> [remove dts-v1, remove model from LED labels, wrap commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* malta: relocate CPU_TYPE setting to subtarget makefilesTony Ambardar2020-10-273-1/+2
| | | | | | | Move CPU_TYPE:=24kc (32-bit) from the top-level target makefile to the be/le subtarget makefiles, which is consistent with the 64-bit subtargets. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* lantiq: add support for AVM FRITZ!Box 7430Leon Maurice Adam2020-10-275-3/+294
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: - SoC: Lantiq VRX 220 - CPU: 2x MIPS 34Kc 500 MHz - RAM: 128 MiB 250 MHz - Flash: 128 MiB NAND - Ethernet: Built-in Fast Ethernet switch, 4 ports used - Wifi: Atheros AR9381-AL1A b/g/n with 2 pcb/internal and 1 external antennas - USB: 1x USB 2.0 - DSL: Built-in A/VDSL2 modem - DECT: Dialog SC14441 - LEDs: 1 two-color, 4 one-color - Buttons: 1x DECT, 1x WIFI - Telephone connectors: 1 FXS port via TAE or RJ11 connector With the exception of FXS/DECT everything works (there are no drivers for AVM's FXS or DECT implementation), DSL is yet untested. Installation: Boot up the device and wait a few seconds. Run the eva_ramboot.py script in scripts/flashing/ to load the initramfs image on the device: $ ./scripts/flashing/eva_ramboot.py 192.168.178.1 <path to your initramfs image> If the script fails to reach the device, maybe try 169.254.120.1. Wait until booting is complete. You should now be able to reach your device under the default ip address 192.168.1.1. Before flashing, check if linux_fs_start is not set to 1 in the tffs partition: $ fritz_tffs_nand -d /dev/mtd1 -n linux_fs_start If linux_fs_start is 1, you will need to reset it to 0, either by FTP, upgrading FritzOS or doing a recovery. Now you should be able to flash the device using sysupgrade. Signed-off-by: Leon Maurice Adam <leon.adam@aol.de> Acked-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> [drop BOARD_NAME, use wpad-basic-wolfssl, drop 4.19, drop dts-v1, remove model prefix from LED names] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: fix indent in vr9_avm_fritz7412.dtsAdrian Schmutzler2020-10-271-1/+1
| | | | | | Indent should be tabs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: reorganize board patches into fewer filesAdrian Schmutzler2020-10-2675-4067/+2730
| | | | | | | | | | | | | | | At the moment, bcm63xx creates one patch for each board to add to board_bcm963xx.c. While this is not really helpful to get an overview in the first place, it is particularly painful if you want to change something for an early file and have to refresh all the later patches accordingly. Since it does not look like these board patches are upstreamed either, this commit consolidates all board additions into one patch per "board". By this, both adding and editing boards should become much simpler, and we drop about 1300 lines of "code" from patches as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: enable upgrade from ar71xx for Qxwlan devicesAdrian Schmutzler2020-10-262-0/+14
| | | | | | | This supports upgrade from ar71xx for the recently added Qxwlan devices E1700AC v2, E558 v2, E750A v4 and E750G v8. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: use dedicated function to move config backupRoman Kuzmitskii2020-10-261-8/+14
| | | | | | | | | | | | | | All octeon devices use the same or a very similar way to backup and restore configuration. We expect to have more devices added and in order to stop repeating ourselves move the logic to a separate function. While at it, add a few checks. Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com> [commit message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix block protection clearingNick Hainke2020-10-261-0/+28
| | | | | | | | | | | | | | | The block protection bits of macronix do not match the implementation. The chip has 3 BP bits. Bit 5 is actually the third BP but here the 5th bit is SR_TB. Therefore the patch adds SR_TB to the mask. In the 4.19er kernel the whole register was simply set to 0. The wrong implementation did not remove the block protection. This led to jffs2 errors in the form of: "jffs2: Newly-erased block contained word 0x19852003 at offset 0x..." This caused inconsistent memory and other errors. Suggested-by: David Bauer <mail@david-bauer.net> Signed-off-by: Nick Hainke <vincent@systemli.org>
* layerscape: several kernel fix-ups from NXP linux factoryYangbo Lu2020-10-263-0/+146
| | | | | | | | | | | | | NXP linux factory unifies one linux kernel for i.MX, Layerscape and S32 platforms. It provides a common code base for their SDKs. Add several kernel patches for bug fix from linux factory last release. Git: https://source.codeaurora.org/external/qoriq/qoriq-components/linux Tag: LTS-5.4.47-20200828 Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update kernel to LSDK-20.04-V5.4-update-290520Biwen Li2020-10-262-0/+274
| | | | | | | | | | | Update kernel from LSDK-20.04-V5.4 to LSDK-20.04-V5.4-update-290520. Only two patches added for Layerscape. LSDK kernel link https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: harmonize wrapping for IMAGE/* definitionsAdrian Schmutzler2020-10-262-3/+6
| | | | | | Always keep the first line empty for multi-line IMAGE/* definitions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: create shared definitions for sdboot devicesAdrian Schmutzler2020-10-262-24/+21
| | | | | | | This moves a few shared variables for SD-Boot devices into common definitions in order to reduce duplicate code. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 19:24:01 +0000