aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* realtek: allow writing to "u-boot-env2"Bjørn Mork2021-04-185-5/+0
| | | | | | | | | U-Boot uses the "bootpartition" variable stored in "u-boot-env2" to select the active system partition. Allow updates to enable system switching from OpenWrt. Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 11d24ffe961570533a4fc54a7511d30c17290623)
* realtek: rename partitions in Netgear DTSIStijn Segers2021-04-181-5/+5
| | | | | | | | | | Switch the Netgear DTSI for the Realtek target from the OEM partition naming scheme to accepted OpenWrt naming practices. A quick git grep for 'u-boot-env' e.g. in the OpenWrt tree turns up almost 500 hits whereas grepping for 'bdinfo' (the OEM equivalent) returns a meagre 14. Signed-off-by: Stijn Segers <foss@volatilesystems.org> (cherry picked from commit 1601b39b6197963e85c441a043702e022779f371)
* realtek: add ZYXEL_VERS to DEVICE_VARSAdrian Schmutzler2021-04-181-0/+2
| | | | | | | | | Otherwise, the last defined value will be set for all devices. Fixes: c6c8d597e183 ("realtek: Add generic zyxel_gs1900 image definition") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 851dadc257b7223f879a3733507e83cfcaae1af1)
* realtek: enable SerDes NWAY and SGMII negotiationBjørn Mork2021-04-182-3/+42
| | | | | | | | This allows copper SFPs to negotiate speeds lower than 1gig. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 963b2ae702510c11e912c9438fdb9222763a22d5)
* realtek: enabled Marvell and Realtek PHYsBjørn Mork2021-04-181-0/+2
| | | | | | | | | | | The rtl83xx-phy driver is necessary for proper configuration of the PHYs if U-Boot hasn't done that. 1000Base-T SFPs often contains a Marvell 88E1111 and will not work without this driver. Include it by default to support copper SFPs. Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 07bf5aaa4c12d6e7eb797b3871a7586f90a46e67)
* realtek: enable HWMON for SFP sensorsBjørn Mork2021-04-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds SFP sensors as a hwmon device, allowing readout of temperatures, DOM and other sensor readings available from the SFP. Example from a ZyXEL GS1900-10HP with a DOM capable 1000Base-SX SFP: root@gs1900-10hp:~# grep . /sys/class/hwmon/hwmon0/* /sys/class/hwmon/hwmon0/curr1_crit:90 /sys/class/hwmon/hwmon0/curr1_crit_alarm:0 /sys/class/hwmon/hwmon0/curr1_input:4 /sys/class/hwmon/hwmon0/curr1_label:bias /sys/class/hwmon/hwmon0/curr1_lcrit:0 /sys/class/hwmon/hwmon0/curr1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/curr1_max:85 /sys/class/hwmon/hwmon0/curr1_max_alarm:0 /sys/class/hwmon/hwmon0/curr1_min:0 /sys/class/hwmon/hwmon0/curr1_min_alarm:0 /sys/class/hwmon/hwmon0/in0_crit:3795 /sys/class/hwmon/hwmon0/in0_crit_alarm:0 /sys/class/hwmon/hwmon0/in0_input:3317 /sys/class/hwmon/hwmon0/in0_label:VCC /sys/class/hwmon/hwmon0/in0_lcrit:2805 /sys/class/hwmon/hwmon0/in0_lcrit_alarm:0 /sys/class/hwmon/hwmon0/in0_max:3465 /sys/class/hwmon/hwmon0/in0_max_alarm:0 /sys/class/hwmon/hwmon0/in0_min:3135 /sys/class/hwmon/hwmon0/in0_min_alarm:0 /sys/class/hwmon/hwmon0/name:sfp_p10 /sys/class/hwmon/hwmon0/power1_crit:708 /sys/class/hwmon/hwmon0/power1_crit_alarm:0 /sys/class/hwmon/hwmon0/power1_input:259 /sys/class/hwmon/hwmon0/power1_label:TX_power /sys/class/hwmon/hwmon0/power1_lcrit:89 /sys/class/hwmon/hwmon0/power1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/power1_max:501 /sys/class/hwmon/hwmon0/power1_max_alarm:0 /sys/class/hwmon/hwmon0/power1_min:126 /sys/class/hwmon/hwmon0/power1_min_alarm:0 /sys/class/hwmon/hwmon0/power2_crit:1259 /sys/class/hwmon/hwmon0/power2_crit_alarm:0 /sys/class/hwmon/hwmon0/power2_input:404 /sys/class/hwmon/hwmon0/power2_label:RX_power /sys/class/hwmon/hwmon0/power2_lcrit:6 /sys/class/hwmon/hwmon0/power2_lcrit_alarm:0 /sys/class/hwmon/hwmon0/power2_max:794 /sys/class/hwmon/hwmon0/power2_max_alarm:0 /sys/class/hwmon/hwmon0/power2_min:10 /sys/class/hwmon/hwmon0/power2_min_alarm:0 /sys/class/hwmon/hwmon0/temp1_crit:100000 /sys/class/hwmon/hwmon0/temp1_crit_alarm:0 /sys/class/hwmon/hwmon0/temp1_input:22547 /sys/class/hwmon/hwmon0/temp1_label:temperature /sys/class/hwmon/hwmon0/temp1_lcrit:-50000 /sys/class/hwmon/hwmon0/temp1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/temp1_max:85000 /sys/class/hwmon/hwmon0/temp1_max_alarm:0 /sys/class/hwmon/hwmon0/temp1_min:-40000 /sys/class/hwmon/hwmon0/temp1_min_alarm:0 /sys/class/hwmon/hwmon0/uevent:OF_NAME=sfp-p10 /sys/class/hwmon/hwmon0/uevent:OF_FULLNAME=/sfp-p10 /sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_0=sff,sfp /sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_N=1 Tested-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 2a912fb63adc3fb3a1ee746589f6df4bb02e4296)
* realtek: re-enable sfp driver for ZyXEL GS1900-10HPBjørn Mork2021-04-181-18/+6
| | | | | | | | | | | | | | There is no need to define a static link or a phy for the sfp ports. Using phy-mode and managed properties to describe the link to the sfp phy. We have to keep the now unconnected virtual "phys" because the switch driver uses their "phy-is-integrated" property to figure out which ports to enable as fibre ports. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit e8d391bd4650418182d96ca06ccd10d636efcbc3)
* realtek: need to handle PHY_INTERFACE_MODE_NA for sfpsBjørn Mork2021-04-181-0/+1
| | | | | | | | | | | From the validate docs in include/linux/phylink.h: When state->interface is PHY_INTERFACE_MODE_NA, phylink expects the MAC driver to return all supported link modes. Tested-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 785d830e889ba18793acf369e447d704269169af)
* realtek: fix link-state interruptBjørn Mork2021-04-181-4/+3
| | | | | | | | This bug was the root cause for the failing sfp driver. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit b8e473d18c6af2abf0d047247fdbe6d178228ac0)
* realtek: Add ZyXEL GS1900-8Hauke Mehrtens2021-04-182-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or SFP ports, but otherwise similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-8 v1.2 * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L12835F 16 MiB * RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM * Ethernet: 8x 10/100/1000 Mbit * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 8 ethernet port status LEDs (green, SoC controlled) * Buttons: 1 on-off glide switch at the back (not configurable) 1 reset button at the right side, behind the air-vent (not configurable) 1 reset button on front panel (configurable) * Power 12V 1A barrel connector * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB, towards the back. Pins are labelled: + VCC (3.3V) + TX (really RX) + RX (really TX) + GND the labelling is done from the usb2serial connector's point of view, so RX/ TX are mixed up. Serial connection parameters for both devices: 115200 8N1. Installation ------------ Instructions are identical to those for the GS1900-10HP and GS1900-8HP. * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-10HP is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot off the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit e6ba970b6ef2289a2a4d3dd6c0c158ee8d10160f)
* realtek: Add generic zyxel_gs1900 image definitionHauke Mehrtens2021-04-181-13/+13
| | | | | | | | Add a new common device definition for the Zyxel GS1900 line of switches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit c6c8d597e18300cd679bf5ea88a46ed18709da01)
* realtek: drop ethtool log noiseBjørn Mork2021-04-182-15/+15
| | | | | | | | | | | | | | Demote a number of debugging printk's to pr_debug to avoid log nosie. Several of these functions are called as a result of userspace activity. This can cause a lot of log noise when userspace does periodic polling. Most of this could probably be removed completely, but let's keep it for now since these drivers are still in development. Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit ba220ad2fd915aaed2e9c850a84078c5c5977d3e)
* ramips: mt7530 swconfig: fix race condition in register accessDENG Qingfang2021-04-181-6/+10
| | | | | | | | | | | | | | | | | The mt7530_{r,w}32 operation over MDIO uses 3 mdiobus operations and does not hold a lock, which causes a race condition when multiple threads try to access a register, they may get unexpected results. To avoid this, handle the MDIO lock manually, and use the unlocked __mdiobus_{read,write} in the critical section. This fixes the "Ghost VLAN" artifact[1] in MT7530/7621 when the VLAN operation and the swconfig LED link status poll race between each other. [1] https://forum.openwrt.org/t/mysterious-vlan-ids-on-mt7621-device/64495 Signed-off-by: DENG Qingfang <dqfext@gmail.com> (cherry picked from commit f99c9cd9c4d4c49a676d678327546fd41690fe2a)
* ath79: fix 10 Mbit PLL data for UniFi ACDavid Bauer2021-04-181-0/+2
| | | | | | | | Fix the PLL register value for 10 Mbit/s link modes on the UniFi AC Lite / Mesh / LR. Otherwise, 10 Mbit/s links do not transfer data. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 956407292dc5fd41f2d8c7cc7e9ec77eb6444c1e)
* ath79: fix 10 Mbit PLL data for TP-Link EAP2xxDavid Bauer2021-04-181-0/+1
| | | | | | | | | | | | Fix the PLL register value for 10 Mbit/s link modes on TP-Link EAP boards using a AR8033 SGMII PHY. Otherwise, 10 Mbit/s links do not transfer data. Reported-by: Tom Herbers <freifunk@tomherbers.de> Tested-by: Tom Herbers <freifunk@tomherbers.de> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit bbff6239e2ea273388f4ca0f8586945ff5f36271)
* ramips: reduce spi-max-frequency for Xiaomi MI Router 4AGDavid Bentham2021-04-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Reduce spi-max-frequency for Xiaomi MI Router 4AG model Xiaomi MI Router 4AG MTD uses two flash chips (no specific on router versions when produced from factory) - GD25Q128C and W25Q128BV. These flash chips are capable of high frequency, but due to poor board design or manufacture process. We are seeing the following errors in the linux kernel bootup: `spi-nor spi0.0: unrecognized JEDEC id bytes: cc 60 1c cc 60 1c spi-nor: probe of spi0.0 failed with error -2` This causes the partitions not to be detected `VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6` Then creates a bootloop and a bricked router. The solution to limit this race condition is to reduce the frequency from 80 mhz to 50 mhz. Signed-off-by: David Bentham <db260179@gmail.com> (cherry picked from commit 17e690017d76c49070bc99d6a376b1926259c5ff)
* mvebu: armada 370: dts: fix the crypto engineDaniel González Cabanelas2021-04-182-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The crypto engine in Armada 370 SoCs is currently broken. It can be checked installing the required packages for testing openssl with hw acceleration: opkg install openssl-util opkg install kmod-cryptodev opkg install libopenssl-devcrypto After configuring /etc/ssl/openssl.cnf to let openssl use the crypto engine for digest operations, and performing some checksums.. md5sum 10M-file.bin openssl md5 10M-file.bin ...we can see they don't match. There might be an alignment or size constraint issue caused by the idle-sram area. Use the whole crypto sram and disable the idle-sram area to fix it. Also disable the idle support by adding the broken-idle property to prevent accessing the disabled idle-sram. We don't care about disabling the idle support since it is already broken in Armada 370 causing a huge performance loss because it disables permanently the L2 cache. This was reported in the Openwrt forum and elsewhere by Debian users with different board models. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit 2e1ebe96c61424d0829bb1c8b5ec44aaa8bea8af)
* mvebu: Fix sysupgrade for GL.iNet GL-MV1000Sven Eckelmann2021-04-181-0/+3
| | | | | | | | | | | | The GL.iNet GL-MV1000 is booting from eMMC and the images for it are in theory sysupgrade compatible. But the platform upgrade scripts were not adjusted to select the mmcblock device as upgrade target. This resulted in a failed sysupgrade because the mtd device (NOR flash) was instead tried to be modified by the sysupgrade script. Fixes: 050c24f05c85 ("mvebu: add support for GL.iNet GL-MV1000") Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit 07e5e03711d55f94db738446ef9eddc8163b53a6)
* ramips: Fix booting on MTC WR1201René van Dorst2021-04-181-0/+1
| | | | | | | | | This fixes the dreaded "lzma error 1" also reported on similar devices Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3057 Fixes: FS#3057 Signed-off-by: René van Dorst <opensource@vdorst.com> (cherry picked from commit 12f3d1466ad783fded1747fa2ee521a9bea1ff73)
* ramips: Fix booting on MQmaker WiTi boardDaniel Engberg2021-04-181-0/+1
| | | | | | | | | This fixes the dreaded "lzma error 1" also reported on similar devices Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3057 Fixes: FS#3057 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> (cherry picked from commit e83f7e5d76ebf74aa0a1f686d2941950fa5f22e2)
* ramips: rt305x: use lzma-loader for ZyXEL Keenetic Lite rev.BSzabolcs Hubai2021-04-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes boot loader LZMA decompression issue, reported by GitHub user KOLANICH at [0]. The reported LZMA ERROR has date of 2020-07-20, soon after the device support landed: Ralink UBoot Version: 3.5.2.4_ZyXEL .... 3: System Boot system code via Flash. Image Name: MIPS OpenWrt Linux-4.14.187 Created: 2020-07-20 3:39:11 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1472250 Bytes = 1.4 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover [0] https://github.com/openwrt/openwrt/commit/fea232ae8feb6af780fd4fa78ebe9231778bf75a#commitcomment-45016560 Fixes: 4dc9ad4af8c921494d20b303b6772fc6b5af3a69 ("ramips: add support for ZyXEL Keenetic Lite Rev.B") Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com> (cherry picked from commit dd3c1ad8ee9ee361285cb9142bdcb35bc3a30ac7)
* bcm53xx: add pending TRX patch for "firmware" partitionRafał Miłecki2021-04-161-0/+43
| | | | | | | | This fixes partitioning on Linksys EA9500. With this change only the currently used firmware MTD partition gets parsed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a3c7633ddcd4fac9ec8935e5be9249c011bfec14)
* gemini,layerscape,oxnas: don't disable option CONFIG_BPF_SYSCALLTony Ambardar2021-04-164-4/+0
| | | | | | | | | | Respect the generic kernel config setting, which is "enabled" tree-wide, as previously done for sunxi. Ref: 247ef4d98bab ("sunxi: enable CONFIG_BPF_SYSCALL and CONFIG_EMBEDDED") Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 41948c9c1b80e39f2fd2771f42e62e209347b0bf) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath79: mikrotik: enable 2nd USB on RouterBOARD 922UAGS-5HPacDKoen Vandeputte2021-04-121-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RB922 boards have 2 separate USB controllers: - 1 is connected to Slot Type A - 1 is connected to the mini PCIe port Enable the 2nd one too. Before: [ 5.339304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.355053] SCSI subsystem initialized [ 5.364184] ehci-fsl: Freescale EHCI Host controller driver [ 5.372377] ehci-platform: EHCI generic platform driver [ 5.378053] ehci-platform 1b000000.usb: EHCI Host Controller [ 5.383861] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 [ 5.391932] ehci-platform 1b000000.usb: irq 14, io mem 0x1b000000 [ 5.410730] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 [ 5.417739] hub 1-0:1.0: USB hub found [ 5.422280] hub 1-0:1.0: 1 port detected [ 5.434007] usbcore: registered new interface driver usb-storage After: [ 5.342988] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.358687] SCSI subsystem initialized [ 5.367813] ehci-fsl: Freescale EHCI Host controller driver [ 5.375998] ehci-platform: EHCI generic platform driver [ 5.381695] ehci-platform 1b000000.usb: EHCI Host Controller [ 5.387507] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 [ 5.395571] ehci-platform 1b000000.usb: irq 14, io mem 0x1b000000 [ 5.416050] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 [ 5.423089] hub 1-0:1.0: USB hub found [ 5.427578] hub 1-0:1.0: 1 port detected [ 5.432432] ehci-platform 1b400000.usb: EHCI Host Controller [ 5.438254] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2 [ 5.446325] ehci-platform 1b400000.usb: irq 15, io mem 0x1b400000 [ 5.468049] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00 [ 5.475082] hub 2-0:1.0: USB hub found [ 5.479574] hub 2-0:1.0: 1 port detected [ 5.491305] usbcore: registered new interface driver usb-storage Fixes: 8f93c05a59 ("ath79: add support for MikroTik RouterBOARD 922UAGS-5HPacD") Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com> (cherry picked from commit 172fa3bc7544ce940ce724d682d66109a3e14a11)
* kernel: bump 5.4 to 5.4.111Hauke Mehrtens2021-04-1173-248/+248
| | | | | | | | | | | | | | | | | | | | | Refreshed all patches. The following patches were manually changed: * 610-netfilter_match_bypass_default_checks.patch * 611-netfilter_match_bypass_default_table.patch * 802-can-0002-can-rx-offload-fix-long-lines.patch * 802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch * 802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch * 802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch * 802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch * 802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch The can-dev.ko model was moved in the upstream kernel. Compile-tested on: x86/64, armvirt/64, ath79/generic Runtime-tested on: x86/64, armvirt/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: move some disabled symbols to genericAleksander Jan Bajkowski2021-04-1126-66/+12
| | | | | | | Move some disabled symbols found in armvirt target to generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> (cherry picked from commit 12e942b1fdda874542e0a4e6ea892969fedab975)
* sunxi: disable LPAE on cortexa8Zoltan HERPAI2021-04-111-0/+2
| | | | | | | LPAE should be disabled as the Cortex-A8 cores don't support it, and the kernel will crash on boot if it's enabled. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* kernel: DSA roaming fix for Marvell mv88e6xxxDENG Qingfang2021-04-1015-0/+1180
| | | | | | | | | | | | | | | | | | | | | | | | | | Marvell mv88e6xxx switch series cannot perform MAC learning from CPU-injected (FROM_CPU) DSA frames, which results in 2 issues. - excessive flooding, due to the fact that DSA treats those addresses as unknown - the risk of stale routes, which can lead to temporary packet loss Backport those patch series from netdev mailing list, which solve these issues by adding and clearing static entries to the switch's FDB. Add a hack patch to set default VID to 1 in port_fdb_{add,del}. Otherwise the static entries will be added to the switch's private FDB if VLAN filtering disabled, which will not work. The switch may generate an "ATU violation" warning when a client moves from the CPU port to a switch port because the static ATU entry added by DSA core still points to the CPU port. DSA core will then clear the static entry so it is not fatal. Disable the warning so it will not confuse users. Link: https://lore.kernel.org/netdev/20210106095136.224739-1-olteanv@gmail.com/ Link: https://lore.kernel.org/netdev/20210116012515.3152-1-tobias@waldekranz.com/ Ref: https://gitlab.nic.cz/turris/turris-build/-/issues/165 Signed-off-by: DENG Qingfang <dqfext@gmail.com> (cherry picked from commit 920eaab1d8179035d0ae1047e75cf9a50da6a6eb)
* x86/base-files: add support for Sophos SG/XG-105Stan Grishin2021-04-102-0/+11
| | | | | | | | This adds detection of the Sophos SG-105 and Sophos XG-105 models and assignment of ethernet ports these models have to LAN/WAN. Signed-off-by: Stan Grishin <stangri@melmac.net> (cherry picked from commit 64eaf633ff7f9280e04e65ae290eb8b65dd9e021)
* kernel: 5.4: import wireguard backportJason A. Donenfeld2021-04-10132-32/+63296
| | | | | | | | | | | | | | | | | | | | | | | | | | Rather than using the clunky, old, slower wireguard-linux-compat out of tree module, this commit does a patch-by-patch backport of upstream's wireguard to 5.4. This specific backport is in widespread use, being part of SUSE's enterprise kernel, Oracle's enterprise kernel, Google's Android kernel, Gentoo's distro kernel, and probably more I've forgotten about. It's definately the "more proper" way of adding wireguard to a kernel than the ugly compat.h hell of the wireguard-linux-compat repo. And most importantly for OpenWRT, it allows using the same module configuration code for 5.10 as for 5.4, with no need for bifurcation. These patches are from the backport tree which is maintained in the open here: https://git.zx2c4.com/wireguard-linux/log/?h=backport-5.4.y I'll be sending PRs to update this as needed. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> (cherry picked from commit 3888fa78802354ab7bbd19b7d061fd80a16ce06b) (cherry picked from commit d54072587146dd0db9bb52b513234d944edabda3) (cherry picked from commit 196f3d586f11d96ba4ab60068cfb12420bcd20fd) (cherry picked from commit 3500fd7938a6d0c0e320295f0aa2fa34b1ebc08d) (cherry picked from commit 23b801d3ba57e34cc609ea40982c7fbed08164e9) (cherry picked from commit 0c0cb97da7f5cc06919449131dd57ed805f8f78d) (cherry picked from commit 2a27f6f90a430342cdbe84806e8b10acff446a2d) Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* zynq: Enable CONFIG_KERNEL_MODE_NEONIlya Lipnitskiy2021-04-101-1/+0
| | | | | | | | | This flag is set on all other platforms. And Zynq 7000 SoC does have NEON support: https://www.xilinx.com/support/documentation/application_notes/xapp1206-boost-sw-performance-zynq7soc-w-neon.pdf Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> (cherry picked from commit 7d00f632b7b245bcf25783797308325aa255b020)
* bcm4908: enable Netgear R8000P bootloader imageRafał Miłecki2021-04-081-2/+2
| | | | | | | | | | | | | | | | | | | This enables building BCM4908 "raw" image that can be flashed using bootloader web UI. It requires serial console access & stopping booting by the "Press any key to stop auto run". It's easy to build vendor like CHK image but it can't be safely flashed using vendor UI at this point. Netgear implements method called "NAND incremental flashing" that doesn't seem to flash bootfs partition as provided. Above method seems to update vmlinux.lz without updating 94908.dtb. It prevents OpenWrt kernel from booting due to incomplete DTB file. Full Netgear R8000P support can be enabled after finding a way to make vendor firmware flash OpenWrt firmware including the 94908.dtb update. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d92a9c97bf3700e90af1d3c9157502af660365c0)
* bcm4908: enable target & Asus GT-AC5300 imageRafał Miłecki2021-04-082-1/+3
| | | | | | | | | | OpenWrt was succesfully tested on the GT-AC5300 model. It's possible to: 1. Install OpenWrt using vendor UI 2. Perform UBI aware sysupgrade 3. Install vendor firmware using OpenWrt sysupgrade Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 5e78cb9b85a045f436abf6a03aa5c774d30e1090)
* firmware-utils: bcm4908img: convert into a packageRafał Miłecki2021-04-081-1/+3
| | | | | | | | | | | bcm4908img is a tool managing BCM4908 platform images. It's used for creating them as well as checking, modifying and extracting data from. It's required by both: host (for building firmware images) and target (for sysupgrade purposes). Make it a host/target package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9b4fc4cae9fa0cd0cd9060e1c9d33320c3249ced)
* bcm4908: fix Netgear R8000P imageRafał Miłecki2021-04-081-2/+5
| | | | | | | Use vendor format to allow flashing using Negear UI. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f2c8c62d98f2137d8af896e56d5e29759cf48715)
* bcm4908: add sysupgrade supportRafał Miłecki2021-04-081-0/+213
| | | | | | | | | | | It supports flashing OpenWrt images (bootfs & UBI upgrade) as well as vendor images (whole MTD partition write). Upgrading cferom is unsupported. It requires copying device specific data (like MAC) to target image before flashing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a6a0b252baa6c19dfc62611ea910b56527ce4fa5)
* bcm4908: pad firmware image bootfs JFFS2 partition to 8 MiBRafał Miłecki2021-04-081-1/+1
| | | | | | | | | | This way MTD "bootfs" partition will be always 8+ MiB. This should be enough for any custom / future firmware to fit its bootfs (e.g. big kernel) without having to repertition whole flash. That way we can preserve UBI and its erase counters during sysupgrade. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ca9b1f15c424d68af0f372c37c8eee81b36ee7e1)
* bcm4908: rename bootfs dummy file to the 1-openwrtRafał Miłecki2021-04-081-1/+1
| | | | | | | | | | | | | The purpose of that dummy file is to make CFE work properly with OpenWrt bootfs. CFE for some reason ignores JFFS2 files with ino 0. Rename it to 1-openwrt so: 1. It's consistent with bcm63xx 2. It's OpenWrt specific so sysupgrade can distinguish it from vendor images Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 880c8b44223c9cbce3dd14da78c33676c6f1a8a6)
* bcm4908: enable JFFS2 supportRafał Miłecki2021-04-081-1/+0
| | | | | | | It's needed for accessing JFFS2 bootfs partition. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 180c4635265b4907221a62b3068ac89447cd83d7)
* bcm4908: backport DT patch adding Ethernet MAC addressRafał Miłecki2021-04-081-0/+82
| | | | | | | | This tells OS (Linux) where from MAC should be read (bootloader MTD partition). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1cc5eb45d5192b41d97d5da58c34353f4c3240f9)
* kernel: create bootfs partition when parsing on BCM4908Rafał Miłecki2021-04-081-5/+9
| | | | | | | | | It's helpful for accessing booting data (DTS, kernel, etc.). It has to be used carefully as CFE's JFFS2 support is quite dumb. It doesn't recognize deleted files and has problems handling 0 inode. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 6dd727ac24fa36ac3f23e9a5cf6781a7d1c6b797)
* bcm4908: backport the latest bcm_sf2 commitsRafał Miłecki2021-04-086-111/+210
| | | | | | | | 1. CFP support for BCM4908 2. Upstream RGMII regs fix Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a49fd9db0a2bfad8ea9a09f32fadbd3cc7e46205)
* bcm4908: backport DTS patch with Ethernet TX IRQRafał Miłecki2021-04-082-1/+31
| | | | | | | It allows bcm4908_enet Linux driver to work more efficiently. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 13d9904acdd24e002aab3d6c3dd7879826b54008)
* bcm53xx: enhance support for Linksys EA9500Vivek Unune2021-04-084-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add leds and configs 2. Add network configs 3. Add script to clear partial boot flag 4. Hack to use port 5 as cpu port as port 8 connected to eth2 wont pass any frames 5. Enable EA9500 image generation Hardware Info: - Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz - Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125 - DDR3 RAM - 256 MB - Flash - 128 MB (Toshiba TC58BVG0S3HTA00) - 2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC - Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4) - 5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC - Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch - Ports - 8 Ports, 1 WAN Ports - Antennas - 8 Antennas - Serial Port - @j6 [GND,TX,RX] (VCC NC) 115200 8n1 Flashing Instructions: 1. Connect a USB-TTL table to J6 on the router as well as a ethernet cable to a lan port and your PC. 2. Power-on the router. 3. Use putty or a serial port program to view the terminal. Hit Ctrl+C and interrupt the CFE terminal terminal. 4. Setup a TFTP server on your local machine at setup you local IP to 192.168.1.2 5. Start the TFTP Server 6. Run following commands at the CFE terminal flash -noheader 192.168.1.2:/openwrt.trx nflash0.trx flash -noheader 192.168.1.2:/openwrt.trx nflash0.trx2 nvram set bootpartition=0 && nvram set partialboots=0 && nvram commit 7. Reboot router to be presented by OpenWrt Note: Only installation method via serial cable is supported at the moment. The trx firmware has to be flashed to both the partitions using following commands from CFE prompt. This will cover US and Non-US variants. Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 209c5918b511d9e406a094ba246a985b640e519f)
* bcm53xx: use upstream Linksys EA9500 fixesRafał Miłecki2021-04-082-1/+30
| | | | | | | One fix was accepted, one was added. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 22369ad7887e98bdb9d1999f221dfcd5fbb2f389)
* bcm53xx: fix Linksys EA9500 partitionsRafał Miłecki2021-04-081-0/+58
| | | | | | | Use proper DT binding. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f8669c174ee17bbb8d59f901d639f57449dcf751)
* bcm53xx: backport Linksys Panamera (EA9500) patchesVivek Unune2021-04-085-2/+230
| | | | | | | | | | | | | | | | | These patches have been already accepted. 302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch had to be updated. [rmilecki: use actual upstream accepted patches replace v5.10 with v5.11 to match actual upstream kernel recover dropped part of the pinctrl compatible patch update filenames refresh patches] Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 39ed2265dde1bc8817f9dc6ba053268bb6939ae6)
* kernel: backport 5.13 mtd partitioning changesRafał Miłecki2021-04-0814-27/+324
| | | | | | | | | 1. Use upstream accepted NVMEM patches 2. Minor fix for BCM4908 partitioning 3. Support for Linksys firmware partitions on Northstar Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3fd0a4222b6efbfbdb560c5b13e899ecda627494)
* generic: add missing symbolsDavid Bauer2021-04-031-0/+1
| | | | | Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 55ed4bf6d7bf80b705d015c3b73f772db485ba9c)
* ath79: fix label_mac for NEC Aterm WG1200CRINAGAKI Hiroshi2021-04-021-2/+6
| | | | | | | | | | | On NEC Aterm WG1200CR, the MAC address for WAN is printed in the label on the case, not LAN. This patch fixes this issue. Fixes: 50fdc0374b ("ath79: provide label MAC address") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> (cherry picked from commit e2331fb5491e52e3e21ab18b58d064b344e093e5)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 21:39:27 +0000