aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* generic: ar8216: register the switch from the probe routineGabor Juhos2013-02-141-17/+12
| | | | | | | | | | | | | | | | | Currently the switch gets registered when an ethernet driver connects to a PHY of the switch. This method does not work with the ethernet drivers which are connecting to the PHY from their ndo_open callback. With those ethernet drivers, the driver tries to register the switch each time when the etherned device is opened and this causes a deadlock. Move the switch registration into the probe routine to fix this problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35602
* x86: update config-3.7 for x86 (turn off CONFIG_GPIO_ICH)Florian Fainelli2013-02-141-0/+1
| | | | | | | Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35601
* brcm47xx: if the cpuport of the switch is port 8 assume vlan0ports: "1 2 3 4 ↵Hauke Mehrtens2013-02-141-16/+8
| | | | | | 8" and vlan0ports: "0 8" SVN-Revision: 35597
* mpc85xx: enable swconfig and the ar8216 driverGabor Juhos2013-02-131-0/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35592
* mpc85xx: enable the squashfs driverGabor Juhos2013-02-131-1/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35591
* mpc85xx: enable XZ_DEC_BCJ and XZ_DEC_POWERPC supportGabor Juhos2013-02-131-0/+2
| | | | | | | | | | | | | | | | | Squashfs is unable to decompress some blocks without that: [ 199.494500] SQUASHFS error: xz_dec_run error, data probably corrupt [ 199.500910] SQUASHFS error: squashfs_read_data failed to read block 0xbff26 [ 199.508016] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.514440] SQUASHFS error: Unable to read page, block bff26, size 153f8 [ 199.521311] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.527724] SQUASHFS error: Unable to read page, block bff26, size 153f8 [ 199.534594] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.541009] SQUASHFS error: Unable to read page, block bff26, size 153f8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35590
* ar71xx: fix factory image creation for dir-825-c1Gabor Juhos2013-02-131-1/+1
| | | | | | | Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35589
* ar71xx: fix switch-config for dir-825-c1Gabor Juhos2013-02-131-7/+1
| | | | | | | Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35588
* brcm47xx: configure vlan correctly on some recent devices.Hauke Mehrtens2013-02-131-1/+4
| | | | SVN-Revision: 35587
* brcm47xx: add some more fixes to bgmacHauke Mehrtens2013-02-121-7/+35
| | | | | | Thank you Rafał Miłecki and Nathan Hintz SVN-Revision: 35574
* brcm47xx: update tg3 to the version send upstreamHauke Mehrtens2013-02-121-114/+63
| | | | SVN-Revision: 35573
* mvebu: remove boards suffixLuka Perkov2013-02-121-2/+2
| | | | SVN-Revision: 35572
* kernel: update linux 3.7 to 3.7.7Gabor Juhos2013-02-1217-17/+17
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35571
* ar71xx: add script for automatic switch name migrationGabor Juhos2013-02-111-0/+106
| | | | | | | | Thanks to Jonas Gorski for the help. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35567
* ar71xx: allow unknown multicast frames to pass to the CPU on AR934xFelix Fietkau2013-02-111-2/+4
| | | | SVN-Revision: 35564
* ar8216: remove superfluous code from ar8216_config_initGabor Juhos2013-02-111-12/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35562
* ar71xx: use switchX names in network configurationGabor Juhos2013-02-111-34/+34
| | | | | | | | | | | | Accessing the AR8xxx switches via the name of the attached ethernet device is not possible since r35560. Change the uci-defaults script to use switchX names in switch configurations. Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35561
* generic: ar8216: don't use ethernet device name in register_switchGabor Juhos2013-02-111-3/+4
| | | | | | | | | | The switches are accessed via an MDIO bus. Set the alias to the name of the MDIO bus, and show that in the message along with the name of the switch switch device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35560
* generic: ar8216: reuse the private data from ar8216_probeGabor Juhos2013-02-111-33/+40
| | | | | | | | | | | The private data of the switch is already allocated in ar8216_priv, assign that to each PHY on the same MDIO bus. Also remove the redundant code from ar8216_config_init. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35559
* generic: ar8216: use phydev instead of pdev everywhereGabor Juhos2013-02-111-33/+33
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35555
* generic: ar8216: use pr_* macros for kernel messagesGabor Juhos2013-02-111-8/+7
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35554
* generic: ar8216: fix PHY features setupGabor Juhos2013-02-111-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | Sujith says: This commit breaks the WAN port on my AP96 - DHCP fails. Reverting it fixes the issue. commit b67cc3a0cdd02973610d4d5a63226d1c44841e94 Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Fri Feb 8 09:13:18 2013 +0000 generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73 This change restores the previous behaviour and moves the code into the ar8216_probe function. Reported-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Sujith Manoharan <sujith@msujith.org> SVN-Revision: 35549
* generic: ar8216: add ar8xxx_probe_switch helperGabor Juhos2013-02-101-31/+42
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35547
* generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stopGabor Juhos2013-02-101-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35546
* generic: ar8216: free mib counters from ar8xxx_freeGabor Juhos2013-02-101-4/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35545
* generic: ar8216: add ar8xxx_free helperGabor Juhos2013-02-101-6/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35544
* generic: ar8216: add ar8xxx_create{,mii} helpersGabor Juhos2013-02-101-14/+33
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35543
* generic: ar8216: remove redundant phy address checkGabor Juhos2013-02-101-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35542
* generic: ar8216: only set phy_ptr if packet mangling is usedGabor Juhos2013-02-101-2/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35541
* generic: ar8216: add defines for the AR8316 POSTRIP registerGabor Juhos2013-02-102-2/+32
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35539
* generic: ar8216: don't probe the chip multiple timesGabor Juhos2013-02-101-8/+8
| | | | | | | | It is only needed when the private data is allocated. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35538
* generic: ar8216: add sanity check to ar8216_probeGabor Juhos2013-02-101-0/+41
| | | | | | | | | Verify that the mdio bus has PHY devices with a supported PHY ID at address 0-4. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35537
* generic: ar8216: skip probe on unused PHY addressesGabor Juhos2013-02-101-0/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35536
* ar71xx: register the micro sd card reader on RB493GJonas Gorski2013-02-101-0/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35535
* generic: b53: fix reverted error check in probeJonas Gorski2013-02-101-1/+1
| | | | | | | | | | | | b53_switch_detect returns value returned by b53_read8, which is 0 for success. So fail (and return error) only if b53_switch_detect returned something else than 0. This fixes supported and advertising being zeros for MDIO access. Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35534
* bcm63xx: handle huawei nvram layoutJonas Gorski2013-02-108-10/+108
| | | | | | | | | Use a different length for calculating the nvram checksum on hauwei boards. Fixes boot on HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35533
* generic: ar8216: move sleep out of the loopGabor Juhos2013-02-091-1/+2
| | | | | | | | | | It is enough to sleep once after ANEG is enabled on all PHYs. This reduces boot time on boards with AR8316 switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35532
* ar71xx: Routerboard 751 Mac Address Offset FixGabor Juhos2013-02-081-2/+10
| | | | | | | | | | | | | | | We utilize many Routerboard 751's and discovered that our latest batch of RB751's would not initialize the wireless radio. We have determined Mikrotik has changed where the mac address was located inside hardconfig. As such we utilize "routerboot_find_tag" to find the location of the mac address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous by machine manufacturing date. The newer batch of RB751's that we received had a RB751_MAC_ADDRESS_OFFSET 0x10. Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35519
* generic: ar8216: simplify phy features setupGabor Juhos2013-02-081-11/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35518
* generic: ar8216: don't use mdio bus specific functions in ar8216_id_chipGabor Juhos2013-02-081-8/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35517
* generic: ar8216: use inline function to convert swdev to ar8216Gabor Juhos2013-02-071-15/+19
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35514
* generic: ar8216: add mii_bus field to struct ar8216_privGabor Juhos2013-02-071-11/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35513
* generic: mvswitch: add detach callbackGabor Juhos2013-02-071-1/+12
| | | | | | | | | | | Use the detach callback to disable packet mangling to avoid possible NULL pointer dereference. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35512
* generic: ar8216: add detach callbackGabor Juhos2013-02-071-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code uses the 'remove' callback to disable packet mangle on the underlying ethernet device. However the attached_dev is always NULL when the 'remove' callback is called by phylib, and this causes NULL pointer dereference, like this: [ 475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac [ 475.310000] Oops[#1]: [ 475.310000] Cpu 0 [ 475.310000] $ 0 : 00000000 00000000 00000000 00000001 [ 475.310000] $ 4 : 828dde00 00000005 828dde08 ffffffff [ 475.310000] $ 8 : 00380081 00380081 82902a40 00000001 [ 475.310000] $12 : 00000037 00370081 00000001 00000000 [ 475.310000] $16 : 82865000 828dde08 828dde00 00000001 [ 475.310000] $20 : 00000080 00460000 00000002 77151448 [ 475.310000] $24 : 00000000 801abfd4 [ 475.310000] $28 : 82cc2000 82cc3d58 0053c3c4 801c7eac [ 475.310000] Hi : 00000007 [ 475.310000] Lo : 00000004 [ 475.310000] epc : 801cdcf0 ar8216_remove+0x1c/0x94 [ 475.310000] Tainted: G O [ 475.310000] ra : 801c7eac phy_remove+0x4c/0x6c [ 475.310000] Status: 1000cc03 KERNEL EXL IE [ 475.310000] Cause : 00800008 [ 475.310000] BadVA : 000000f0 [ 475.310000] PrId : 00019750 (MIPS 74Kc) [ 475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80 211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440) [ 475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8 82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94 00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000 83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000 00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000 ... [ 475.310000] Call Trace: [ 475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94 [ 475.310000] [<801c7eac>] phy_remove+0x4c/0x6c [ 475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0 [ 475.310000] [<801ad7fc>] device_release_driver+0x28/0x40 [ 475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c [ 475.310000] [<801aac44>] device_del+0x110/0x170 [ 475.310000] [<801aacb8>] device_unregister+0x14/0x28 [ 475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70 [ 475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx] [ 475.310000] [ 475.310000] Code: 1200001c 8c82017c ac800128 <8c4500f0> 3c03ffdf 3463ffff 00a31824 ac4300f0 ac4000e0 Add a detach callback and disable packet mangling in that to fix the problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35511
* generic: add detach callback to struct phy_driverGabor Juhos2013-02-078-4/+112
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35510
* brcm47xx: fix name of kmod-ocf-ubsec-ssbHauke Mehrtens2013-02-061-1/+1
| | | | | | | | This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb. Thank you Manuel Munz <freifunk@somakoma.de> for the patch. SVN-Revision: 35509
* brcm47xx: bgmac: make it possible to set the devices into promisc mode when ↵Hauke Mehrtens2013-02-062-0/+206
| | | | | | | | it is already up This fixes #12927. SVN-Revision: 35507
* remove support for 3.6 kernelFlorian Fainelli2013-02-05117-14251/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35506
* make default version 3.7.6Florian Fainelli2013-02-051-1/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35505
* remove superfluous calls to /lib/brcm63xx.shFlorian Fainelli2013-02-053-6/+1
| | | | | | | | | | The first preinit script 03_do_brcm63xx.sh does the right job of exporting variables for the other subsequent preinit scripts to use them. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35504
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 23:26:36 +0000