aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: abort ar40xx probe on missing PHYsDavid Bauer2019-09-251-0/+23
| | | | | | | | | | | | | The ar40xx driver currently panics in case no QCA807x PHY has been successfully probed. This happens when the external PHY is still in reset when probing the ar40xx switch driver. Note that this patch does not fix the root cause, ar40xx_probe now simply fails instead of causing a kernel panic due to a nullpointer dereference. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit e2c084cabc2b2a2fffc36aee3e48874f9862c74a)
* kernel: bump 4.14 to 4.14.146Koen Vandeputte2019-09-241-1/+1
| | | | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-14814 - CVE-2019-14815 - CVE-2019-14816 - CVE-2019-14821 Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: add disable_eap_hack sysfs attributeEtienne Champetier2019-09-231-4/+55
| | | | | | | | We are not sure if 640-bridge-only-accept-EAP-locally.patch is still needed as a first step, add disable_eap_hack sysfs config to allow to disable it Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com> (cherry picked from commit 7d542dc8047d276517b296132926e722004065e0)
* ath79: remove invalid uses of ath9k_patch_fw_mac_crcAdrian Schmutzler2019-09-221-3/+3
| | | | | | | | | | | | | Some ar9344-based devices are using ath9k_patch_fw_mac_crc, which is meant to generate a checksum, for fixing their ath9k MAC addresses. However, those do not have a checksum field, and the calculated checksum offset would be negative. This patch will use ath9k_patch_fw_mac function for those devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit f8d8b3f85d70a85d4fabc9b8ed4dbc8020be0523)
* kernel: bump 4.14 to 4.14.145Koen Vandeputte2019-09-2012-25/+25
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.144Koen Vandeputte2019-09-207-180/+97
| | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 816-pcie-support-layerscape.patch Fixes: - CVE-2019-15030 Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: add factory image for NETGEAR R6220David Bauer2019-09-161-1/+6
| | | | | | | | | | | This adds an easy-installation factory image for the NETGEAR R6220 router. The factory image can either be flashed via the vendor Web-UI or the bootloader using nmrpflash. Tested with NETGEAR V1.1.0.86 firmware. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 607dfdf211bebb5043cbc0267c1e2c3e3c2514b4)
* brcm47xx: sysupgrade: support Luxul firmware formatDan Haab2019-09-161-0/+82
| | | | | | | Allow flashing Luxul devices using vendor firmware format. Signed-off-by: Dan Haab <dan.haab@legrand.com> (cherry picked from commit 95240c4933607544ad1788c2ed19843dd96bccbb)
* bcm53xx: sysupgrade: support Luxul firmware formatDan Haab2019-09-161-0/+84
| | | | | | | | Allow flashing Luxul devices using vendor firmware format. The next step will be building proper images once they are conirmed to work. Signed-off-by: Dan Haab <dan.haab@legrand.com> (cherry picked from commit bc5db7364d1e00be5bbe5444e81c40571fbd696d)
* ar71xx: fix typo in platform_do_upgrade_compex()Rafał Miłecki2019-09-161-1/+1
| | | | | | Fixes: a71742882855 ("treewide: use new procd sysupgrade $UPGRADE_BACKUP variable") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 63d611390c4d34a838e744e278529f30f9d2cc20)
* treewide: sysupgrade: use $UPGRADE_BACKUP to check for backupRafał Miłecki2019-09-168-10/+10
| | | | | | | | Now that $UPGRADE_BACKUP is set conditionally there is no need to check the $UPGRADE_OPT_SAVE_CONFIG anymore. All conditions can be simplified. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a858db313687ddfa6ed1ddba76bd74844a7b89dc)
* ath79: fix UniFi AC LED mappingDavid Bauer2019-09-151-4/+9
| | | | | | | | | | | | The UniFi AC LED mapping is currently off. The blue/white LED are used as WiFi indicators, while the vendor firmware does not feature WiFI LEDs. Instead, the LEDs are used to indicate the devices status. Align the LED mapping to match the vendor firmware as good as possible. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 18fa749df8bd9fe292c93f60ddd3fb963a78274a)
* ar71xx: make IRQ fixes target specificKoen Vandeputte2019-09-141-0/+0
| | | | | | | | | | | Move the IRQ fix from generic to ar71xx specific. Other targets like ath79 have specific pathes to delete this code. This resulted in a build failure on ath79 Fixes: 00d48bcac08a ("ar71xx: Fix potentially missed IRQ handling during dispatch") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: fix potential IRQ misses during dispatch for qca953xKoen Vandeputte2019-09-131-0/+27
| | | | | | | | | | | | If both interrupts are set in the current implementation only the 1st will be handled and the 2nd will be skipped due to the "if else" condition. Fix this by using the same approach as done for QCA955x just below it. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 9e8c36557cc0582986862f5a36e17adf6db2b90e)
* ar71xx: Fix potentially missed IRQ handling during dispatchKoen Vandeputte2019-09-131-0/+57
| | | | | | | | | | | If both interrupts are set in the current implementation only the 1st will be handled and the 2nd will be skipped due to the "if else" condition. Fix this by using the same approach as done for QCA955x just below it. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.143Koen Vandeputte2019-09-132-291/+1
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 390-v5.3-net-sched-fix-action-ipt-crash.patch Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: extend firmware validationRafał Miłecki2019-09-121-1/+11
| | | | | | | | This provides TRX validation result to the validation JSON. It also prevents users from installing broken firmware files. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit c19b9f9a2623c110222210d04f75ace0e594c7e9)
* brcm47xx: extend firmware validationRafał Miłecki2019-09-121-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | This provides TRX validation result, so final JSON may look like: { "tests": { "fwtool_signature": true, "fwtool_device_match": true, "trx_valid": true }, "valid": true, "forceable": true } It also prevents users from installing broken firmware files, e.g.: root@OpenWrt:/# sysupgrade -F -n /tmp/TZ Image metadata not found Invalid image type. Please use firmware specific for this device. Image check failed but --force given - will update anyway! Commencing upgrade. Closing all shell sessions. Firmware image is broken and cannot be installed Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e68c1cebd1d87ce60f0646688e437e83081e2322)
* treewide: use new procd sysupgrade $UPGRADE_BACKUP variableRafał Miłecki2019-09-1219-22/+22
| | | | | | | | | | | It's a variable set by procd that should replace hardcoded /tmp/sysupgrade.tgz. This change requires the most recent procd with the commit 0f3c136 ("sysupgrade: set UPGRADE_BACKUP env variable"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 641f6b6c26cb9ab5e1198810015e5f4b2b5b34ad)
* treewide: when copying a backup file always specify dest nameRafał Miłecki2019-09-1212-12/+12
| | | | | | | | $CONF_TAR shouldn't be assumed to always point to the sysupgrade.tgz. This change makes code more generic and allows refactoring $CONF_TAR. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 62dbe361a1b1ed1506bc0387bff55eddcb619e49)
* treewide: don't hardcode "sysupgrade.tgz" file nameRafał Miłecki2019-09-1213-21/+28
| | | | | | | | | 1) Add BACKUP_FILE and use it when copying an archive to be restored after sysupgrade (on the next preinit). 2) Use CONF_TAR for copying backup prepared by the /sbin/sysupgrade Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit bf390478727ac5f4f9d6fb684de48b8150bcec67)
* Revert "ar71xx: use platform code for qca955x usb0 init"Koen Vandeputte2019-09-121-14/+0
| | | | | | | | | | | | | | | This reverts commit af91a370de2b94a37b8a87a9f95503e96dfcb744. As Piotr Dymacz pointed out: In QCA MIPS based WiSOCs, for first USB interface, device/host mode can be selected _only_ in hardware see description of 57c641ba6e QCA955x and QCA9563, second USB can be switched to device mode in software (tested and confirmed on real hardware). Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: qca955x pci init/reset fixesTomislav Požega2019-09-111-0/+120
| | | | | | | | | | | | | | | Current ar724x code does the reset only on single pci bus, and in case of qca9558 writes the wrong register (0x10 vs 0x0c). This change allows the reset of second pci bus, commonly used in Archer C7 devices, in case host controller is stuck in reset. If the resetting controller on boot can solve any other issue it can be enabled unconditionally by removing reset check before ar724x_pci_hw_init is called. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> [refreshed to apply cleanly] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 76d870871cb12fc0c170e5fd23bce568adfaae6d)
* ar71xx: enable ddr wb flush on qca955xTomislav Požega2019-09-111-0/+49
| | | | | | | | | Enable flushing of write buffers on qca955x. GPL code has 0x88 reg defined for PCI flush which is likely an error since the device freezes on boot. So use DS default value 0xA8 for PCI flush. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> (cherry picked from commit fe9e702dc94ece2a004f6db68d6fb9a94d9437cb)
* ar71xx: use platform code for qca955x usb0 initTomislav Požega2019-09-111-0/+14
| | | | | | | | Switch from ci_usb_setup to generic platform initialization of usb0 port. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> (cherry picked from commit 36a0cfd24be1cb79f221964ed2bfe12b98befff3)
* kernel: bump 4.14 to 4.4.142Koen Vandeputte2019-09-115-34/+8
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 0032-usb-host-fotg2-restart-hcd-after-port-reset.patch Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: fix ethernet MAC address of ASUS RT-AC57UAdrian Schmutzler2019-09-091-1/+1
| | | | | | | This backports the only non-cosmetic fix from 6640e1c3681b ("ramips: clean and improve MAC address setup in 02_network"). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: fix duplicate network setup for dlink, dir-615-h1Adrian Schmutzler2019-09-091-1/+0
| | | | | | | | | | | | | | | In 555ca422d1cb ("ramips: fix D-Link DIR-615 H1 switch port mapping"), port setup for dir-615-h1 was changed without removing the old one. This was working as the new one was triggered earlier than the old one. (In the meantine, changed sorting during ramips rename patches actually inversed that order.) Anyway, just remove the wrong case now. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit e35e4a996e26f17b69d200505ecea78af96a2704)
* ramips: remove duplicate case for MAC setup of freestation5Adrian Schmutzler2019-09-091-1/+0
| | | | | | | | | | | | | ARC FreeStation5 is present twice in MAC address setup. >From older commits/changes, it is not possible to reconstruct the correct choice only by reading the annotations. Thus, remove the second case and keep the first one, so behavior stays the same (as nobody seems to have complained about it). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit ad4eb2241b33b05b0942a3fa7ed2e53fb6e84386)
* mt7620: disable image generation for Nexx WT3020 (4MB)Hauke Mehrtens2019-09-081-1/+1
| | | | | | | | | Image generation is currently failing on builbots due to the following error: WARNING: Image file openwrt-19.07-snapshot-r10495-db5164d3d0-ramips-mt7620-wt3020-4M-squashfs-factory.bin is too big Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* apm821xx: Make patches apply againHauke Mehrtens2019-09-081-30/+0
| | | | | | | | This patch was applied to the upstream kernel in version 4.14.135, remove it from our patches directory. Fixes: 40379b0ec64d ("apm821xx: fix bogus key-presses on boot") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: fix AVM NAND caldata extractionDavid Bauer2019-09-081-3/+15
| | | | | | | | | | | | | | The AVM Fritz!Box 7530 (and probably other AVM IPQ4019 NAND devices) has it's caldata not stored consistently, but instead at currently 3 known possible offsets. As we get a non-zero exit code from fritz_cal_extract, simply try all three possible offsets on both bootloader partitions, until a matching caldata for each radio is found. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit a6f85b81b7efd3fa3265d70e5406275b2dc03f5f)
* kernel: net_sched: fix a NULL pointer deref in ipt actionCong Wang2019-09-082-1/+291
| | | | | | | | | | | | | | | | | | | | | The net pointer in struct xt_tgdtor_param is not explicitly initialized therefore is still NULL when dereferencing it. So we have to find a way to pass the correct net pointer to ipt_destroy_target(). The best way I find is just saving the net pointer inside the per netns struct tcf_idrinfo, which could make this patch smaller. Fixes: 0c66dc1ea3f0 ("netfilter: conntrack: register hooks in netns when needed by ruleset") Reported-and-tested-by: Tony Ambardar <itugrok@xxxxxxxxx> Cc: Jamal Hadi Salim <jhs@xxxxxxxxxxxx> Cc: Jiri Pirko <jiri@xxxxxxxxxxx> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> [Backport for kernel v4.19 and v4.14] [Bug Link: https://bugzilla.kernel.org/show_bug.cgi?id=204681] Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 7735cce0c5c306bd9eea20ca2805e4a492c02be9)
* mvebu: sysupgrade: don't use $ARGV in platform_check_image()Rafał Miłecki2019-09-071-1/+1
| | | | | | | | | | sysupgrade passes image path to platform_check_image() as an argument so it can be simply accessed using $1 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 76e43c82b55518b794ac24f9acfb3888c638f99b) [rmilecki: dropping ARGV without this change broke sysupgrade] Fixes: 6ac62c4b6cae ("base-files: don't set ARGV and ARGC")
* treewide: sysupgrade: don't use $ARGV in platform_do_upgrade()Rafał Miłecki2019-09-0715-43/+43
| | | | | | | | | | stage2 passes image path to platform_do_upgrade() as an argument so it can be simply accessed using $1 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8b4bc7abe073489a3595eeb2d81818852319c148) [rmilecki: dropping ARGV without this change broke sysupgrade] Fixes: 6ac62c4b6cae ("base-files: don't set ARGV and ARGC")
* ath79: correct OCEDO Ursus phy-mode propertyDavid Bauer2019-09-071-1/+3
| | | | | | | | | | This fixes the previously incorrect phy-mode for the OCEDO Ursus GMAC0. See 62abbd587dc9 ("ath79: correct various phy-mode properties") for more details. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 7b137e9df920926dbd92f12450d9955c2759c92b)
* ramips: fix network setup for various NETGEAR boardsDavid Bauer2019-09-071-11/+6
| | | | | | | | | | | | | | | | | There are currently the following issues present for the Netgear R6220, R6350 and WNDR3700 v5: - LAN and WAN MAC-addresses are inverted - WAN MAC-address is off. It are +2 compared to the LAN MAC-address (R6350 only) - Switchport order is inverted in LuCi This commit fixes both these issues by assigning correct MAC-addresses to LAN and WAN interfaces and defining the switchports with the correct labels. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 13937a16d40693df67d3d39faa3a80644bdb7abf)
* ramips: use phy trigger for various Netgear boardsDavid Bauer2019-09-073-1/+2
| | | | | | | | | | This commit switches the default trigger for the WiFi LED from a netdev trigger on "wlan0" to a wireless-phy based trigger. THis allows the LED to work, even when the wireless interface is not named "wlan0" without modifiying the LED settings. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit fa46c9b208fe3833f085e9f6ddf7c492b16f6c34)
* ramips: disable badblock shifting for MT7621 NANDDavid Bauer2019-09-071-1/+1
| | | | | | | | | | | | | | | | | | The MediaTek MT7621 NAND driver currently intransparently shifts NAND pages when a block is marked as bad. Because of this, offsets for e.g. caldata and MAC-addresses seem to be off. This is, howeer, not a task for the mtd NAND driver, as the flash translation layer is tasked with this. This patch disables this badblock shifting. This fix was originally proposed by Jo-Philipp Wich at https://bugs.openwrt.org/index.php?do=details&task_id=1926 Fixes FS#1926 ("MTD partition offset not correctly mapped when bad eraseblocks present") Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 527832e54bf3bc4d699a145ae66f34230246f0a9)
* treewide: fix invalid UPGRADE_OPT_SAVE_CONFIG spellingsRafał Miłecki2019-09-065-7/+7
| | | | | | | | That was a result of accidentally running "sed" twice on some files. Fixes: 9b9412d55cca ("treewide: replace remaining (not working now) $SAVE_CONFIG uses") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1078de96e315f3cc2675b2c5935009e8c6159ad4)
* treewide: replace remaining (not working now) $SAVE_CONFIG usesRafał Miłecki2019-09-068-10/+10
| | | | | | | | This var has been replaced by the $UPGRADE_OPT_UPGRADE_OPT_SAVE_CONFIG Fixes: f25d164aca80 ("base-files: pass "save_config" option to the "sysupgrade" method") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 5797fe84a3b508483f7d82e177157c1bf2f342d9)
* treewide: sysupgrade: pass "save_partitions" option to the "sysupgrade" methodRafał Miłecki2019-09-047-7/+7
| | | | | | | | This explicitly lets stage2 know if partitions should be preserved. No more "touch /tmp/sysupgrade.always.overwrite.bootdisk.partmap" hack. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit b6f4cd57e19a8cfcd9ff52582b65164ce6213c3d)
* mvebu: sysupgrade: drop platform_copy_config_sdcard() argumentRafał Miłecki2019-09-041-1/+1
| | | | | | | | That function doesn't take any arguments so don't pass anything when calling it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 670ce65a44db4263ee21a3fce962c47378ef042b)
* bcm53xx: sysupgrade: call nand_do_upgrade() from platform_do_upgrade()Rafał Miłecki2019-09-041-17/+12
| | | | | | | | | | | | Calling nand_do_upgrade() from platform_pre_upgrade() was obsoleted in the commit 30f61a34b4cf ("base-files: always use staged sysupgrade"). This change brings bcm53xx in sync with other targets and allows dropping backward compatibility code. It shouldn't change any user visible behavior. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ccf8a8e8633ccfd94fda233b06055ac42e4c9fd5)
* gemini: Fix up DNS-313 compatible stringLinus Walleij2019-09-042-1/+22
| | | | | | | | | | | It's a simple typo in the DNS file, which was pretty serious. No scripts were working properly. Fix it up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [integrate upstream patch into openwrt target] (cherry picked from commit 5470e928d08fd4cca99cf77ccee72e4fee444d27)
* apm821xx: fix bogus key-presses on bootChristian Lamparter2019-09-041-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | "There are often transient line events when the system is powered up and initialized and it is often necessary for the gpio_chip driver to clear any interrupt flags in hardware before setting up the gpio chip, especially the irqchip portions of it." <http://lists.infradead.org/pipermail/openwrt-devel/2019-June/017630.html> This patch adds a fix for the APM821XX's interrupt controller to clear any bogus pending toggled interrupts that happens on various APM821XX boards on boot. The patch also changes the debouce-interval from the default 5ms debounce interval to 60ms all around. The default setting caused on occasions that the button state became stuck in a pressed state, even though the button was released. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (backported from commit 971f31bedcad0a954a4a4e79140346cc896d352e)
* ath79: Merge cases in 11-ath10k-caldataAdrian Schmutzler2019-09-041-5/+2
| | | | | | | Cosmetical patch that just merges two cases. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 28baaaae82155e7fc695789dd0a807cc2f298be8)
* gemini: Fix MAC address assignment for DIR-685Linus Walleij2019-09-041-0/+15
| | | | | | | | | | | | The DIR-685 has the MAC addresses in the RedBoot code just like DNS-313. Check some magic numbers to determine that the MAC address is where we want it and extract it from RedBoot. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [replaced ifconfig with ip, ! -z = -n, added string quotes] (cherry picked from commit 86098ea87e8ef4051da5f3a1d7f75737e36df512)
* gemini: Make a per-board case for ethernet MACLinus Walleij2019-09-041-12/+16
| | | | | | | | | The DNS-313 isn't the only special board so let's bite the bullet and create a case ladder in preparation for DIR-685. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed] (cherry picked from commit 38d85d2c9fd9a3fd061fb56823821834dd720516)
* gemini: Use library functions to assign MAC addressLinus Walleij2019-09-041-12/+20
| | | | | | | | | | | | | | | | | | | This simplifies the ethernet address extraction script by using standard library functions to locate the MTD partitions and extract ethernet address from a binary offset location in the flash. Furthermore, the aging ifconfig is replaced by the ip tool, which will now assign the MAC addresses. Suggested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [ifconfig replacement, use -n instead of ! -z, -n requires string to be quoted within the test brackets, drop prepended "x" in check, add quotes, make local variables local, kill whitespaces] (cherry picked from commit cd6c3535cd2c7779a8d65f792c36082ee3822c11)