aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* kernel: Update kernel 4.9 to version 4.9.234Hauke Mehrtens2020-08-2717-44/+44
| | | | | | Compile and runtime tested on lantiq/xrx200. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Update kernel 4.14 to version 4.14.195Hauke Mehrtens2020-08-2719-49/+49
| | | | | | Compile and runtime tested on x86/64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86: Add CONFIG_EFI_CUSTOM_SSDT_OVERLAYSHauke Mehrtens2020-08-111-0/+1
| | | | | | | | | | The CONFIG_EFI_CUSTOM_SSDT_OVERLAYS option was added in kernel 4.14.188, set it for the x86/generic target. This fixes a build problem in the x86/generic target. Fixes: 35e9edc3dfef ("kernel: Update kernel 4.14 to version 4.14.193") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: fix ZyXEL NBG6616 wifi switchChristoph Krapp2020-08-111-2/+2
| | | | | | | | The device uses a rf-kill switch instead of a button. Furthermore the GPIO is active high. Signed-off-by: Christoph Krapp <achterin@googlemail.com> (cherry picked from commit 0af656e978f1adac4061516d9d2e661e101ba64c)
* ar71xx: change u-boot-env to read-write for ZyXEL NBG6616Christoph Krapp2020-08-111-1/+1
| | | | | | | | | | As the ath79 port of this device uses a combined kernel + root partition the uboot bootcmd variable needs to be changed. As using cli/luci is more convenient than opening up the case and using a uart connection, lets unlock the uboot-env partition for write access. Signed-off-by: Christoph Krapp <achterin@googlemail.com> (cherry picked from commit 982c1f6e42c5b3e0f23eedd825a317a2872aa37b)
* kernel: update kernel 4.9 to version 4.9.232Hauke Mehrtens2020-08-0815-107/+31
| | | | | | | | | 821-usb-Remove-annoying-warning-about-bogus-URB.patch does not apply any more and was also deleted in master and nobody complained. ;-) Compile and runtime tested on lantiq/xrx200. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Update kernel 4.14 to version 4.14.193Hauke Mehrtens2020-08-0811-19/+19
| | | | | | Compile and runtime tested on x86/64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: enable ethernet LED of Arduino YunSungbo Eo2020-08-021-2/+1
| | | | | | | | | Commit 05d73a2a7379 enabled GPIO on ethernet LED, but proper LED setup was not added then. This commit fixes it by reverting the change on the LED. Fixes: 05d73a2a7379 ("ar71xx: Arduino Yun board 'WLAN RST' button support") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit a5e404d1923d135d335e4ece83f87e6e891396e2)
* ar71xx: fix sysupgrade for Arduino YunSungbo Eo2020-08-021-1/+1
| | | | | | | | | | Commit bb46b635df48 changed its partition scheme, but sysupgrade image validation still uses the old format. This commit fixes it so that force flag is not needed for sysupgrade. Fixes: bb46b635df48 ("ar71xx: move Arduino Yun to generic building code") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 58dc1d0637425cfe023192466e6212009332b677)
* ramips: add kmod-usb-dwc2 to ZyXEL Keenetic imageAlexey Dobrovolsky2020-08-021-1/+2
| | | | | | | | | | | | ZyXEL Keenetic has a USB port. Thus, DWC2 USB controller driver should be in the default image for this device. Fixes: a7cbf59e0e04 ("ramips: add new device ZyXEL Keenetic as kn") Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> [fixed whitespace issue] Signed-off-by: Petr Štetiar <ynezz@true.cz> (backported from commit 0a182fcba6d9cb2cf74cae9114ea4770ef928f75) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: remove patches for USB-dwc2Alexey Dobrovolsky2020-08-021-29/+0
| | | | | | | | | | | | | | | In FS#2738 we can see that patch first introduced in e8ebcff ("ramips: add a explicit reset to dwc2") breaks USB functionality since 18.06. Thus, this patch should be removed. Removed: - 0032-USB-dwc2-add-device_reset.patch Fixes: FS#2738 Fixes: FS#2964 Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> (cherry picked from commit ab841b4393a4077a5819da1da040ab9a89e3b69d)
* ar71xx: Fix mikrotik NAND compile problemHauke Mehrtens2020-07-071-1/+1
| | | | | | | | | | | This fixes the following compile error: drivers/mtd/nand/rb91x_nand.c: In function 'rb91x_nand_remove': drivers/mtd/nand/rb91x_nand.c:445:16: error: 'rbni' undeclared (first use in this function) nand_release(&rbni->chip); Fixes: 0f07496f520c ("kernel: Update kernel 4.9 to version 4.9.229") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 66e04abbb6d0dec8642be5deb2fca4bba470f8ac)
* ar71xx: Fix mikrotik NAND compile problemHauke Mehrtens2020-07-061-1/+1
| | | | | | | | There is one closing bracket too much. Fixes: 0f07496f520c ("kernel: Update kernel 4.9 to version 4.9.229") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 014d3f593acea13ee6aa002d858f182806ed43f0)
* kernel: Update kernel 4.9 to version 4.9.229Hauke Mehrtens2020-07-0535-76/+72
| | | | | | | | | | Fixes: - CVE-2020-10757 Run tested: ar71xx Build tested: ar71xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Update kernel 4.14 to version 4.14.187Hauke Mehrtens2020-07-0538-135/+78
| | | | | | | | | | Fixes: - CVE-2020-10757 Run tested: x86 Build tested: x86 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm63xx: a226m-fwb: fix linux partition offsetDaniel González Cabanelas2020-06-151-4/+4
| | | | | | | | | | | | | | | | | | | The Pirelli A226M-FWB has a wrong linux partition offset, caused by a copy-paste error. As of result of this, OpenWrt is currently broken in this unit. Fix it. While at it, also use generic node names and fix the addresses there as well. Fixes: a27d59bb4274 ("brcm63xx: switch to new partition layout specification") Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> [also fix/update node names, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit d64d5ed1425f4397d093c8777ca03f70ff1ee90c)
* ipq40xx: essedma: Disable TCP segmentation offload for IPv6Sven Eckelmann2020-06-131-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | It was noticed that the the whole MAC can hang when transferring data from one ar40xx port (WAN ports) to the CPU and from the CPU back to another ar40xx port (LAN ports). The CPU was doing only NATing in that process. Usually, the problem first starts with a simple data corruption: $ wget https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/debian-10.4.0-amd64-netinst.iso -O /dev/null ... Connecting to saimei.ftp.acc.umu.se (saimei.ftp.acc.umu.se)|2001:6b0:19::138|:443... connected. ... Read error at byte 48807936/352321536 (Decryption has failed.). Retrying. But after a short while, the whole MAC will stop to react. No traffic can be transported anymore from the CPU port from/to the AR40xx PHY/switch and the MAC has to be resetted. The whole problem can be avoided by disabling the TSO for IPv6 for this ethernet MAC driver. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: John Crispin <john@phrozen.org> (backported from commit 678569505623e50bbbbc344c7e820fb315b79ede, with updated commit message) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: drop non-existant ralink,port-map for Ravpower WD03Adrian Schmutzler2020-05-191-1/+0
| | | | | | | | | | | The property "ralink,port-map" has been obsolete long before this device was added, and the device is a one-port anyway. Just remove it. Fixes: 5ef79af4f80f ("ramips: add support for Ravpower WD03") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit c00b2df6c8e421ea7aa96f53178dc85db99f2305)
* bcm63xx: mask interrupts on initÁlvaro Fernández Rojas2020-05-181-0/+12
| | | | | | | | Fixes BCM6348/BCM6358 hangs while booting: https://bugs.openwrt.org/index.php?do=details&task_id=2202 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 13c33f3f121ca6fe2ab1f80e04cf2d4f2cd6abec)
* bcm63xx: ext_intc: fix warningÁlvaro Fernández Rojas2020-05-181-0/+28
| | | | | | | | | | | | | | | | | | In file included from ./arch/mips/include/asm/io.h:34, from ./arch/mips/include/asm/mmiowb.h:5, from ./include/linux/spinlock.h:60, from ./include/linux/irq.h:14, from drivers/irqchip/irq-bcm6345-ext.c:10: drivers/irqchip/irq-bcm6345-ext.c: In function 'bcm6345_ext_intc_of_init': ./arch/mips/include/asm/mach-bcm63xx/ioremap.h:48:9: warning: 'base' may be used uninitialized in this function [-Wmaybe-uninitialized] return is_bcm63xx_internal_registers((unsigned long)addr); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/irqchip/irq-bcm6345-ext.c:255:16: note: 'base' was declared here void __iomem *base; ^~~~ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 29c3bb5f413f0962971c66e6516b8409a78e0135)
* bcm63xx: periph_intc: fix warningÁlvaro Fernández Rojas2020-05-181-0/+20
| | | | | | | | | | drivers/irqchip/irq-bcm6345-periph.c: In function 'bcm6345_periph_irq_handle': drivers/irqchip/irq-bcm6345-periph.c:55:21: warning: 'block' may be used uninitialized in this function [-Wmaybe-uninitialized] struct intc_block *block; ^~~~~ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit f2f2cf07a61e9c170ab8d65e1e054f0131a84e2a)
* bcm63xx: redboot: fix warningÁlvaro Fernández Rojas2020-05-181-1/+1
| | | | | | | | | | drivers/mtd/parsers/redboot.c: In function 'parse_redboot_partitions': drivers/mtd/parsers/redboot.c:194:59: warning: suggest parentheses around '-' in operand of '&' [-Wparentheses] fis_origin = (buf[i].flash_base & (master->size << 1) - 1); ~~~~~~~~~~~~~~~~~~~~^~~ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit f314cbe54be4d90e748e18ae5e9fb00d5fd31c91)
* bcm63xx: bcm6362: fix pinctrl bugÁlvaro Fernández Rojas2020-05-181-0/+11
| | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit ee6bf7e865510ff1e0645b08bec65f8212ed70d4)
* bcm63xx: refresh kernel configÁlvaro Fernández Rojas2020-05-181-0/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 4.14 to 4.14.180Koen Vandeputte2020-05-126-16/+16
| | | | | | | | | | | | | Refreshed all patches. Fixed: - CVE-2020-12114 - CVE-2020-11669 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.223Koen Vandeputte2020-05-126-13/+13
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2020-12114 Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: remove unnecessary DEVICE_PACKAGES for Belkin F7C027Sungbo Eo2020-04-271-1/+0
| | | | | | | | kmod-usb-dwc2 and kmod-usb-ledtrig-usbport are not target default packages, and Belkin F7C027 does not have a USB port anyway. Just drop it. Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 1dedad2a00d8519d4892b8529b5f2fffcb768220)
* oxnas: move service file to correct placeSungbo Eo2020-04-271-0/+0
| | | | | | | | This service file has been misplaced from the very beginning. Fixes: dcc34574efba ("oxnas: bring in new oxnas target") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 01961f163d927d6b44097f48a67bbc5b4c63eaf7)
* kernel: bump 4.14 to 4.14.176Koen Vandeputte2020-04-1627-258/+77
| | | | | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 0001-net-thunderx-workaround-BGX-TX-Underflow-issue.patch - 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch Fixes: - CVE-2020-8647 - CVE-2020-8648 (potentially) - CVE-2020-8649 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.219Koen Vandeputte2020-04-1618-70/+70
| | | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 0026-NET-multi-phy-support.patch Fixes: - CVE-2020-8647 - CVE-2020-8648 (Potentially) - CVE-2020-8649 Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: add missing symbol for Kernel 4.14Koen Vandeputte2020-04-151-0/+1
| | | | | | | | | | | Reported by Buildbot: x86 instruction decoder selftest (X86_DECODER_SELFTEST) [N/y/?] (NEW) aborted! Fixes: 4eba86820fd3 ("kernel: bump 4.14 to 4.14.169") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [rebased onto 18.06] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: use full 8MB flash on ZyXEL KeeneticAlexey Dobrovolsky2020-04-122-2/+2
| | | | | | | | | | | | | | | | | ZyXEL Keenetic has 8MB flash, but OpenWrt uses only 4MB. This commit fixes the problem. WikiDevi page [1] says that ZyXEL Keenetic has FLA1: 8 MiB, there is an article with specs [2] (in Russian). [1] https://wikidevi.wi-cat.ru/ZyXEL_Keenetic [2] https://3dnews.ru/608774/page-2.html Fixes: FS#2487 Fixes: a7cbf59e0e04 ("ramips: add new device ZyXEL Keenetic as kn") Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> (cherry picked from commit fea232ae8feb6af780fd4fa78ebe9231778bf75a)
* Revert "ar71xx: use status led for GL.iNet GL-AR750S"Adrian Schmutzler2020-03-261-1/+0
| | | | | | | | This reverts commit c3c6cc95eeadf5230d77d5afabc9a9e0b4887ee5. The GL.iNet GL-AR750S is not supported in 18.06. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: use status led for GL.iNet GL-AR750SJan Alexander2020-03-261-0/+1
| | | | | | | | | | | | | Use power led for device status. The status led behavior has already been fixed in af28d8a539fe ("ath79: add support for GL.iNet GL-AR750S") when porting the device to ath79. This fixes it for ar71xx as well. Signed-off-by: Jan Alexander <jan@nalx.net> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit d394c354ee0e8660f876889f6293803c581cbf85)
* ar71xx: fix port order on TP-Link Archer C60 v1/v2Adrian Schmutzler2020-03-141-6/+2
| | | | | | | | | | The labels on the LAN ports of the TP-Link Archer C60 v1/v2 are actually inverted compared to the ports of the internal switch. Add this information to 02_network. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 14a07fa1f000f962d55bf53cfe9b128448b1f11f)
* ar71xx: remove wrong MAC address adjustment for Archer C60 v2Adrian Schmutzler2020-03-141-2/+1
| | | | | | | | | | | | The adjustment of the MAC address for Archer C60 v2 in 10_fix_wifi_mac is broken since a "mac" partition is not set up for this device on ar71xx. Instead, the MAC address is already patched correctly in 11-ath10k-caldata. Remove the useless adjustment. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit cbdc91902466dd113b9680566abb2eb2f8022dd4)
* ar71xx: fix swapped LAN/WAN MAC address for Archer C60 v1/v2Adrian Schmutzler2020-03-142-5/+5
| | | | | | | | | | | | | | | | | | | | The MAC addresses for lan/wan are swapped compared to the vendor firmware. This adjusts to vendor configuration, which is: lan *:7b label wan *:7c label+1 2.4g *:7b label 5g *:7a label-1 Only one address is stored in <&mac 0x8>, corresponding to the label. This has been checked on revisions v1, v2 and v3. Since ar71xx calculates the ath10k MAC address based on the ethernet addresses, the number there is adjusted, too. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 14eb54938b525d4c2d2847a6fad7670ed944650c)
* ar71xx: ew-dorin, fix the trigger level for WPS buttonopenwrt-18.06Catrinel Catrinescu2020-03-111-1/+1
| | | | | | | | | | Because the WPS button had the wrong trigger level, the failsafe mode was triggered quite often, after this commit: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=27f3f493de Signed-off-by: Catrinel Catrinescu <cc@80211.de> (cherry picked from commit 3e03b7ac4ada4966d058871d0a1f67f1f0f408d4)
* kernel: backport out-of-memory fix for non-Ethernet devicesRafał Miłecki2020-03-111-0/+71
| | | | | | | | Doing up & down on non-Ethernet devices (e.g. monitor mode interface) was consuming memory. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ec8e8e2ef0826d82b4dfbd567a073b31dc27b764)
* kernel: bump 4.14 to 4.14.172Koen Vandeputte2020-03-099-13/+13
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.215Koen Vandeputte2020-03-095-22/+22
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.171Koen Vandeputte2020-02-2413-30/+25
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2013-1798 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.214Koen Vandeputte2020-02-249-18/+18
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2013-1798 Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: add support for GD25D05 SPI NORKoen Vandeputte2020-02-041-0/+29
| | | | | | | | | | | | | | | | | | | | | | This chip is used on newer RB912UAG-5HPnD r2 boards: Before: [ 0.642553] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 10 [ 0.649381] NAND flash driver for the RouterBOARD 91x series After: [ 0.641714] m25p80 spi0.0: found gd25d05, expected m25p80 [ 0.649916] m25p80 spi0.0: gd25d05 (64 Kbytes) [ 0.655122] Creating 4 MTD partitions on "spi0.0": [ 0.660164] 0x000000000000-0x00000000c000 : "routerboot" [ 0.667782] 0x00000000c000-0x00000000d000 : "hard_config" [ 0.675073] 0x00000000d000-0x00000000e000 : "bios" [ 0.682613] 0x00000000e000-0x00000000f000 : "soft_config" [ 0.690304] NAND flash driver for the RouterBOARD 91x series Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.169Koen Vandeputte2020-02-04101-367/+328
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-14896 - CVE-2019-14897 Remove upstreamed: - 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch Altered patches: - 102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch - 105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch - 106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch - 108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch - 207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch - 350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch - 356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch - 390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch - 391-MIPS-BCM63XX-do-not-register-uart.patch - 392-MIPS-BCM63XX-remove-leds-and-buttons.patch - 416-BCM63XX-add-a-fixup-for-ath9k-devices.patch - 422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch - Compile-tested on: brcm63xx, cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.212Koen Vandeputte2020-02-0411-52/+52
| | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-14896 - CVE-2019-14897 Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.167Koen Vandeputte2020-01-241-1/+1
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.211Koen Vandeputte2020-01-246-9/+9
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kirkwood: fix HDD LED labels for Zyxel NSA325 in 01_ledsStephan Knauss2020-01-211-2/+2
| | | | | | | | | | Change the LED labels for hdd1/hdd2 in 01_leds to match their counterpart in DTS. Signed-off-by: Stephan Knauss <openwrt@stephans-server.de> [improve commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit fbf297be38a93b9ca1119e5aaffecd2299087aa5)
* brcm47xx: fix switch port order for Netgear WN2500RP V1Walter Sonius2020-01-211-0/+5
| | | | | | | | | | | | | | The Netgear WN2500RP V1 switch0 already works for LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: 4 / 3 / 2 / 1 WAN port is absent on this device and therefore removed from switch config. Signed-off-by: Walter Sonius <walterav1984@gmail.com> [move block to maintain alphabetic sorting] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 098cbc68ee23db589ed6f0d081fe26cc385462f2)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 07:55:46 +0000