aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add support for TP-LINK CPE210/220/510/520John Crispin2014-11-2610-7/+256
| | | | | | | | | | This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These devices are very similar to the Ubiquiti NanoStations, but with better specs: faster CPU, more RAM, 2x2 MIMO. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 43385
* Netgear R6100 supportImre Kaloz2014-11-2613-4/+232
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43382
* brcm63xx: uci-defaults: network: move DSL-274x1 F1 to right sectionJonas Gorski2014-11-251-1/+1
| | | | | | | | | | The cpu port is at 8, not 5. Fixes #18406. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 43379
* brcm63xx: unify dt image generationJonas Gorski2014-11-251-117/+66
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43378
* brcm63xx: move rsa signature to additional optionsJonas Gorski2014-11-251-47/+42
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43377
* brcm63xx: fix image generationJonas Gorski2014-11-251-0/+1
| | | | | | | | This fixes build issues introduced on r43361. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43376
* rename overlayfs' symbolImre Kaloz2014-11-241-1/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43375
* ralink: fix pci reset patchJohn Crispin2014-11-241-3/+11
| | | | | | | | sorry, forgot to make target/update before commiting the last patch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43374
* mpc85xx: fix missing dts target for kernel 3.14John Crispin2014-11-242-1/+88
| | | | | | | | | | With kernel 3.14 dts target p1010rdb was renamed to p1010rdb-pa. To maintain compatibility define p1010rdb-pa as new standard and copy p1010rdb.dts to p1010rdb-pa.dts under 3.10. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43371
* ralink: add proper reset of pci coreJohn Crispin2014-11-241-0/+29
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43370
* imx6: make the default config bootable on ventanaJohn Crispin2014-11-241-3/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43369
* add initial 3.18 supportImre Kaloz2014-11-245-0/+1012
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43366
* brcm63xx: do not build images for unsupported routersJonas Gorski2014-11-241-14/+0
| | | | | | | | | | If there is no board support in the kernel, it does not make sense to build images for devices. So drop any images for board ids for which there are nc corresponding board_info structs in the kernel. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 43364
* brcm63xx: refresh patchesJonas Gorski2014-11-2419-31/+31
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43363
* brcm63xx: Add DT support for SPW303VJonas Gorski2014-11-244-18/+82
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43362
* brcm63xx: Add DT support for DV-201AMRJonas Gorski2014-11-245-12/+74
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43361
* brcm63xx: Add DT support for RG100AJonas Gorski2014-11-244-13/+50
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43360
* brcm63xx: Add DT support for A226G/MJonas Gorski2014-11-246-18/+116
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43359
* brcm63xx: Add DT support for AGPF-S0Jonas Gorski2014-11-243-3/+48
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43358
* update .18 support for -rc6Imre Kaloz2014-11-249-40/+48
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43357
* ar8216: Fix issue with autoneg being disabled under 3.14, revert 43332Felix Fietkau2014-11-241-2/+47
| | | | | | | | | | Patch reverts 43332 which seems to cause issues with VLAN functionality. Add a specific check to check whether ANEG is still enabled and re-enable it if necessary. Disable generic phy soft reset for kernel >=3.16. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43356
* arm64: add ARM 64-bits targetFlorian Fainelli2014-11-246-0/+362
| | | | | | | | | | This target can be emulated using ARM's Foundation_V8 simulator software or qemu-system-aarch64 using the command-line described in the README file. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43355
* ar71xx: merge changes from 3.10 that were forgotten for 3.14Felix Fietkau2014-11-2319-29/+153
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43347
* ar71xx: remove linux 3.10 supportFelix Fietkau2014-11-23119-9491/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43344
* ar71xx: switch to linux 3.14Felix Fietkau2014-11-231-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43343
* brcm63xx: move board compatible strings into a tableJonas Gorski2014-11-2262-398/+490
| | | | | | | | | | Move compatible strings from board structs into separate table. This allows for several board compatibles to match to the same board in case e.g. only the flash size / partitions differ. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 43341
* sunxi: add config for 3.18Zoltan Herpai2014-11-211-0/+529
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 43338
* sunxi: add initial 3.18 supportZoltan Herpai2014-11-2118-0/+3863
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 43337
* brcm47xx: add support for Netgear WGR614 V10Rafał Miłecki2014-11-205-0/+238
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43336
* ar8216: Use generic hw_init from ar8236 for ar8216 tooFelix Fietkau2014-11-201-13/+7
| | | | | | | | | | We should make sure that also for ar8216 hw gets initialized. For ar8216 hw_init is a dummy currently. The hw_init used for ar8236 should be generic enough to be usable with ar8216 too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43334
* ar8216: simplify PHY fixup/initFelix Fietkau2014-11-201-19/+10
| | | | | | | | | | Move the PHY fixup call to the PHY init loop. Use ar8xxx_has_gige in the PHY init instead of passing the gigE capability via function parameter. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43333
* ar8216: use genphy_config_aneg also for PHY 0Felix Fietkau2014-11-191-10/+1
| | | | | | | | | | | | | | | | | Kernel 3.14 introduced a switch reset in phy_init_hw in drivers/net/phy causing BMCR_ANENABLE to get cleared. Due to the fact that ar8xxx_phy_config_aneg does nothing for PHY 0 autonegatiation support remains disabled. This can cause ports to operate at 10MBit/half-duplex only. Fix this by calling genphy_config_aneg for PHY 0 too as genphy_config_aneg sets BMCR_ANENABLE if it's not yet set. Fixes: ticket 17800 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43332
* ar8216: factor out PHY init code into a generic functionFelix Fietkau2014-11-191-41/+25
| | | | | | | | | | PHY init code in the switch-specific hw_init functions is mainly identical. Factor it out into a generic ar8xxx_phy_init function. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43331
* ar8216: introduce fixup_phys callback in ar8xxx_chipFelix Fietkau2014-11-191-2/+13
| | | | | | | | | Move phy fixup code from the chip-specific hw_init functions into a fixup_phys callback. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43330
* ar8216: after a switch reset poll until BCMR_RESET is clearedFelix Fietkau2014-11-191-3/+29
| | | | | | | | | | | | Currently there is a fixed 1000ms wait time after the switch was reset. Most if not all switches need much less time to perform a reset. Therefore replace the fixed wait time with polling for BMCR_RESET to be cleared. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43329
* ar8216: introduce global constant for number of PHYsFelix Fietkau2014-11-192-4/+5
| | | | | | | | | | All supported switches have 5 PHYs. Currently partially 5 is hardcoded and partially switch-specific constants exist. Replace them with a global constant. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43328
* brcm47xx: mtd: bcm47xxpart: lower minimal blocksize to 4Ki (from 64Ki)Rafał Miłecki2014-11-192-0/+86
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43322
* ixp4xx: Don't overwrite memory in wg302v1_fixup()John Crispin2014-11-191-12/+12
| | | | | | | | | | | | | | | | wg302v1_fixup() looks for the ATAG_CMDLINE atag, it doesn't find it and so it takes the last atag in the list and overwrites non allocated memory. The side effects are corrupted vital data and a kernel that doesn't boot. More details here https://dev.openwrt.org/ticket/18356 The fix appends the fixup to the command line and updates the atag only when it finds it. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> SVN-Revision: 43320
* gemini: add basic nas4220 board supportJohn Crispin2014-11-196-2/+76
| | | | | | | | | | | | Few notes: - redboot partitions are unusable - redboot declares only 16M of RAM, hence the mem arg in cmdline and separate kernel config - boots fine but only ethernet works for now - split wiliboard and raidsonic boards into different subtargets Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 43319
* mpc85xx: add 3.14 kernel support for mpc85xx platformJohn Crispin2014-11-199-0/+1236
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds 3.14 kernel support for the mpc85xx platform. Works fine here with a TL-WDR4900 which seems to be the only supported device using this platform. There might be differences depending on HW version, therefore I'd ask others to test too. Changes to 3.10 missing config options added to 3.14 config file patch 001: rebased patch 100: rebased patch 110: rebased patch 120: rebased patch 130: rebased patch 140: minor adjustment patch 200: removed, change went upstream patch 210: rebased patch 220: removed, change went upstream patch 750: new, fixes an issue with ethernet port autoneg being disabled due to changes in kernel phy handling Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43308
* ar71xx: Added support for D-link DHP-1565 rev. A1John Crispin2014-11-1911-0/+234
| | | | | | Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> SVN-Revision: 43307
* ar71xx: fix switch configuration in Ubiquiti UAP ProJohn Crispin2014-11-191-2/+3
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 43306
* ralink: various fixes to the wm8960 setup codeJohn Crispin2014-11-191-127/+221
| | | | | | | | | still no sound but the codec is properly detected now, powers up and i can hear noise on the speakers. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43305
* ralink: make the dmaengine driver compile under 3.14John Crispin2014-11-191-35/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43304
* ralink: fix tx vlan offload and hardware statusJohn Crispin2014-11-192-27/+40
| | | | | | | | | | | | | hardware status and tx vlan offload support on all targets except rt5350. so i modify the IS_ENABLE condition only for mt7621. support mt7621 hardware status reference by SDK. but i don't have mt7621. if not work just set mt7621 FE_REG_FE_COUNTER_BASE to 0 to let software count. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43303
* ralink: support netconsoleJohn Crispin2014-11-191-0/+15
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43302
* ralink: improve tx vlan offloadJohn Crispin2014-11-192-0/+55
| | | | | | | | | | | hardware tx vlan offload only support max 16 vids now use add/delete vlan interface to update vlan id table when duplicate vlan id index detect. disable hardware tx vlan offload support. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43301
* ralink: merge the mt7620a/n subtargetsJohn Crispin2014-11-1912-239/+44
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43300
* ralink: set ralink_soc on mt7621John Crispin2014-11-171-12/+24
| | | | | | | | sdhci failed to init because of this Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43293
* ralink: fix pcie resetJohn Crispin2014-11-172-11/+21
| | | | | | | | | some old mt7620a uboots dont reset the pcie core properly. work around this issue in the kernel driver. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43292
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 02:10:56 +0000