aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: danube fxs bugfix: changed compatible attribute of vmmcStefan Koch2016-10-261-1/+1
| | | | | | | | This bugfix enables FXS support on dabube based devices. Changed "compatible" attribute from "vmmc" to "vmmc-xway". The vmmc driver uses "vmmc-xway". Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* kirkwood: fix pogo_e02 LED namePaul Wassi2016-10-261-2/+4
| | | | | | | The pogo_e02's dts file has its LEDs named "pogo_e02:(...)" Fix the status-LED's name for this device. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ramips: fix PSG1218 LEDsXuefu Lin2016-10-263-5/+6
| | | | Signed-off-by: Xuefu Lin <xuefulin@gmail.com>
* ar71xx: add support for TP-Link WR802N v1Julius Schulz-Zander2016-10-2612-0/+132
| | | | | | | This patch adds support solely for version 1 of the TP-Link WR802N. It is based on Rick Pannen's patch posted on the OpenWrt devel list. Signed-off-by: Julius Schulz-Zander <julius@inet.tu-berlin.de>
* kirkwood: remove redundant code in etc/board.d/02_networkPaul Wassi2016-10-261-10/+5
| | | | | | | | Remove redundant code: merge boards/cases that share the same network configuration. Also fix the alphabetical ordering of the cases. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: Remove switch config for the MR12/MR16Chris Blake2016-10-261-2/+0
| | | | | | | These boards do not have a switch, so they should have never been added to this file in the first place. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ar71xx: add mac partition to the MR12/MR16Chris Blake2016-10-263-23/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | On the stock Meraki Firmare for the MR12/MR16, a chunk of SPI space after u-boot-env is used to store the boards Mac address. Sadly as this was removed on any device already on OpenWRT/LEDE, moving forward a new, 64k partition named "mac" will be used to store the mac address for the device (which is the minimum size). This allows users to properly set the correct MAC, without editing the ART partition (which holds the same MAC for all devices). The reason the space is taken from kernel instead of rootfs is currently kernels are only 1.3MB, so that way we can leave the current rootfs space alone for users who fully utilize the available storage space. Once this partition is added to a device, you can set your MAC doing the following: mtd erase mac echo -n -e '\x00\x18\x0a\x33\x44\x55' > /dev/mtd5 sync && reboot Where 00:18:0a:33:44:55 is your MAC address. This was tested, and confirmed working on both the MR12 and MR16. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ar71xx: Move MR12 & MR16 from legacy to genericChris Blake2016-10-263-16/+26
| | | | | | | | | | | This moves the Meraki MR12 and Meraki MR16 to the new generic target. Tested and verified working on both devices. Note that kernel/rootfs images are still generated. This is because they are used for the inital flashing process due to the fun pace at which UBoot erases/writes to SPI. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* imx6: Add ds1307 RTC to kernel for working hctosysPetr Štetiar2016-10-261-0/+2
| | | | | | | | | | | Otherwise if we use ds1307 as kernel module, hctosys fails as ds1307 is being initialized later then hctosys: [ 2.427349] hctosys: unable to open rtc device (rtc0) [ 3.714263] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 8.990061] rtc-ds1307 3-006f: rtc core: registered mcp7941x as rtc0 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kirkwood: Add RTC driver to kernel for working hctosysPaul Wassi2016-10-263-6/+6
| | | | | | | Build the RTC driver into the kernel, (and remove the optional module), in order to make hctosys working. (Currently the module is loaded after hctosys has failed previously) Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: Add support to DomyWifi DW33DJing Lin2016-10-2512-0/+235
| | | | Signed-off-by: Jing Lin <mumuqz@163.com>
* kernel: backport MIPS's ioremap_cache from 4.5Rafał Miłecki2016-10-241-0/+29
| | | | | | It's needed by (updated) bcm47xxsflash driver. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: reorder older entries in image MakefileRafał Miłecki2016-10-241-64/+63
| | | | | | Keep all entries sorted and replace tabs with spaces while at it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add fix for CVE-2016-5195Stijn Tintel2016-10-242-0/+180
| | | | | | | | | | | Add fix for CVE-2016-5195 to kernel 3.18 and 4.1. Kernel 4.4 is already fixed since version 4.4.26 which was committed in 32c28a78f798dffb983a7f00342b471e5e4ac177. Patches taken from Sasha Levin's linux-stable git tree: http://git.kernel.org/cgit/linux/kernel/git/sashal/linux-stable.git/ Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: update kernel 3.18 to version 3.18.43Stijn Tintel2016-10-2436-179/+105
| | | | | | | | | | Refresh patches for all targets supporting 3.18 and not marked broken. Compile-tested on all targets using 3.18 and not marked broken. Changes to generic/610-netfilter_match_bypass_default_checks.patch based on 84d489f64f3b382d5544e342f66d8806e94e85d3. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: update kernel 4.1 to version 4.1.34Stijn Tintel2016-10-2441-218/+118
| | | | | | | | | | | | Refresh patches for all targets supporting 4.1 and not marked broken. Compile-tested on all targets using 4.1 and not marked broken. Changes to generic/610-netfilter_match_bypass_default_checks.patch based on 84d489f64f3b382d5544e342f66d8806e94e85d3. Changes to generic/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch based on a90ee92337d60fd14b6431adcda9929b955f3408. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* brcm47xx: bump kernel to 4.4Rafał Miłecki2016-10-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernel 4.4 was ready for brcm47xx for almost a year now but I kept postponing the bump due to problems with Linksys WRT300N v1.0. OpenWrt and LEDE with 4.4 were hanging at the booting with the: > Starting program at 0x80001000 (the last CFE message). This was a permanent state, "make distclean" wasn't helping, I spent hours debugging this and I was reliably reproducing the issue every time. I also reported it on linux-mips ML in the thread: > BCM4704 stopped booting with 4.4 (due to vmlinux size?) After ~month I started working on WRT300N again. I got hangs as expected every time I switched from 4.1 to 4.4. I started experimenting with: 1) TRX content (I tried dropping rootfs partition) 2) BZ_TEXT_START of lzma-loader 3) Flashing other variants of image: lzma compressed kernel (without a loader), gzip compressed one, uncompressed one. At some point I got rootfs-less image booting and after that I couldn't reproduce problem anymore, even with a complete firmware. It seems like hardware was in some locked/unstable state that got magically fixed. I have LEDE working now, tested it even with "make distclean", it seems we can bump kernel now. I'll keep testing it on WRT300N for some time. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: build also TRX image for Linksys WRT300N V1Rafał Miłecki2016-10-241-0/+1
| | | | | | | Linksys WRT300N V1 has pretty bugged CFE bootloader (it crashes in a lot of situations) that doesn't accept .bin image. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: open code Makefile entries for all devicesRafał Miłecki2016-10-241-115/+527
| | | | | | | If we want to use some of new features like per device rootfs we will need this to specify them there. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mvebu: add support for the Linksys WRT3200ACM (Rango)Imre Kaloz2016-10-2411-16/+491
| | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mvebu: add missing status LEDs for Linksys WRT1200AC and WRT1900ACv2Imre Kaloz2016-10-241-1/+8
| | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
* kernel: update kernel 4.4 to version 4.4.27Álvaro Fernández Rojas2016-10-231-2/+2
| | | | | | | Refresh patches for all targets that support kernel 4.4. compile/run-tested on brcm2708/bcm2710 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm53xx: include b43 in Tenda AC9 imageRafał Miłecki2016-10-201-1/+1
| | | | | | There is some (poor?) support for BCM43217 in b43. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lantiq: enable cpu temp driver for all vr9 boardsMathias Kresin2016-10-196-20/+4
| | | | | | | Only present on v1.2 vr9 SoCs but the driver takes care to not load on boards having a v1.1 SoC. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix thermal sensors driverMathias Kresin2016-10-191-5/+21
| | | | | | | | | | | | | | | | | | | | Read the temperature including the decimale place from the CGU_GPHY1_CR register. Decrement the temperature read from the register by 38.0 degree celsius. The temperature range of the sensor is -38.0 to +154 °C and the register value 0 is equal to -38.0 °C. This fixes the report of unrealistic temperatures as seen on all tested boards. Give the SoC a few milliseconds to get the first temperature value. On some rare occasions there is no temperature value in the register when read the first time after activation. This leads to a reported temperature of -38.0 °C on boot. Only version 1.2 of the vr9 SoC has a temperature sensor. Add a check to make sure the driver doesn't load on v1.1 vr9 SoCs. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: Sanitize device tree filesAndreas Eberlein2016-10-1956-656/+668
| | | | | | | | | | The device tree file of ARV752DPW uses numbers/hex values for gpio states and input event codes. This cleans it up and uses the available macros from header files. This way the functions are easier to read and comprehend. Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de> [sanitize all device tree files] Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: Fix buttons for ARV752DPWAndreas Eberlein2016-10-191-5/+5
| | | | | | | | The GPIO for reset switch is wrong in definition. Further the key codes for the two additional buttons are ineffective. Both is fixed here. Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
* lantiq: use new build code for DGN3500Mathias Kresin2016-10-191-99/+36
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: drop lzma-loaderMathias Kresin2016-10-1924-2792/+0
| | | | | | It isn't used any more. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: rework VG3503J imageMathias Kresin2016-10-193-79/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new image build code and remove the lzma loader. The lzma loader was used to cheat the signature validation of the bootloader and I found another way to do this. To migrate boards already using LEDE/OpenWrt to the new image the following steps need to be done once: VR9 # run reset_uboot_config VR9 # reset VR9 # setenv ethaddr AA:BB:CC:DD:EE:FF VR9 # setenv preboot ping 1.1.1.1\;bootm 0xb001f000 VR9 # saveenv VR9 # tftp 0x81000000 lede-lantiq-xrx200-VG3503J-squashfs-sysupgrade.bin VR9 # erase 0xb0020000 $(filesize) VR9 # cp.b 0x81000000 0xb0020000 $(filesize) The mac address is printed on the label at the bottom of the case. The following steps are need to be done during first install: VR9 # setenv preboot ping 1.1.1.1\;bootm 0xb001f000 VR9 # saveenv VR9 # tftp 0x81000000 lede-lantiq-xrx200-VG3503J-squashfs-sysupgrade.bin VR9 # erase 0xb0020000 $(filesize) VR9 # cp.b 0x81000000 0xb0020000 $(filesize) The image uses the uImage firmware splitter now instead of hardcoded kernel and rootfs partitions. The firmware partition size was extended to use flash space that was reserved for partitions required only by the ECI firmware. Due to the changes an upgrade to a later LEDE revision from a running LEDE is supported now. A default switch config was added and the device uses the same MAC addresses as the ECI firmware now instead of the same for all VG3503J. Signed-off-by: Mathias Kresin <dev@kresin.me>
* bcm53xx: include usbport trigger for devices with USBRafał Miłecki2016-10-191-0/+1
| | | | | | | We don't have any code for enabling it automatically yet but it allows adding entries manually to the /etc/config/system. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: drop usbdev LED triggerRafał Miłecki2016-10-199-472/+5
| | | | | | It was LEDE's trigger that was replaced by upstream usbport one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* switch to the new usbport LED triggerRafał Miłecki2016-10-1927-134/+134
| | | | | | | This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: add back end-of-UBI marker for a few factory images (FS#228)Felix Fietkau2016-10-181-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Add support to TP-Link EAP120Henryk Heisig2016-10-1810-1/+168
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ar71xx: set EU region code for TP-Link TL-WA901ND v4Matthias Schiffer2016-10-151-0/+1
| | | | | | | | | | | | | There is no US firmware for the TL-WA901ND v4 yet, so we'll just unconditionally set the EU region for now. This makes LEDE flashable on these devices again. The format of the region string is slightly different from the one used on the Archer C7 that is generated by mktplinkfw (the second half of the region string is missing), but it's similar enough to make it work. Tested-by: Jannis Pinter <jannis@pinterjann.is> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: add support for Planex VR500.YuheiOKAWA2016-10-157-1/+112
| | | | | | | | | | | | SOC: MT7621A RAM: 256MiB NOR: MX25L51245G Non Wireless Router. Issue: soft reboot problem. SPI Flash do not exit 4byte address mode. Signed-off-by: Yuhei Okawa <tochiro.srchack@gmail.com>
* imx6: inittab: Use login.sh wrapper so we can configure console passwordPetr Štetiar2016-10-151-2/+2
| | | | | | | | In dc92917 there was introduced login.sh wrapper which allows configuration of console passwords via UCI system ttylogin config option. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ar71xx: add support for the Airtight C-60Christian Lamparter2016-10-1513-14/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Airtight C-60. SOC: Atheros AR9344 rev 2 (CPU:560.000MHz) RAM: 128 MiB NOR: MX25L3205D 4MiB NAND: ST Micro NAND 32MiB 3,3V 8-bit SW-NET: AR8327N (2 Ports) WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC) WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip The switch is setup for an accesspoint: LAN1: (gigabit) is the wan-port. LAN2: (fast ethernet) is bridged with the br-lan. Flashing Guide (via initramfs): 1. Connect a PC to the serial port of the C-60. power up the C-60. Enter u-boot command prompt: #> nand erase #> setenv bootcmd "bootm 0x9f060000" #> saveenv #> setenv ipaddr 192.168.1.1 #> setenv netmask 255.255.255.0 #> setenv serverip 192.168.1.100 #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin #> tftpboot #> bootm 2. Wait for the C-60 to boot LEDE. On the root prompt. Enter: # ubiformat /dev/mtd4 # ubiattach -p /dev/mtd4 3. After that copy the sysupgrade.tar onto the router and run: # sysupgrade sysupgrade.tar to flash the image. Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided a C-60 unit and he helped with debugging the switch, LEDs and platfrom support. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* generic: ar8216: improve ar8xxx_is_possible checkChristian Lamparter2016-10-151-6/+6
| | | | | | | | | | | | | | | | | The commit "generic: ar8216: add sanity check to ar8216_probe" (774da6c7a40320a320b28d71291c0e61fcf7bc8a) stated that PHY IDs should be checked at address 0-4. However, the PHY 4 was never check by the loop. This patch extends the check to be similar to the Atheors SDK. It tries all 4 ports and skips unconnected PHYs if necessary. If it cannot find any familiar PHYs, it will prevent the phy driver from initializing. This patch is necessary for the C-60. It doesn't have a PHY at port 3, so this caused the check in ar8xxx_is_possible to fail. As a result, the ethernet ports on the C-60 didn't work. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq806x: C2600: change leds colour nameHenryk Heisig2016-10-152-13/+12
| | | | Signed-off-by: Henryk Heisig hyniu@o2.pl
* ipq806x: add support for indicating the boot and upgrade state using four ledsHenryk Heisig2016-10-155-15/+54
| | | | Signed-off-by: Henryk Heisig hyniu@o2.pl
* lantiq: use wpad-mini for WBMR boardsMathias Kresin2016-10-152-20/+2
| | | | | | | | | | The WBMR boards are the only ones in the whole tree selecting the wpad and hostapd-utils package by default. Remove the wps uci-default script as well, there is no obvious reason why the wps config need to be set only for this board. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ARV452CQW keysMathias Kresin2016-10-151-1/+1
| | | | | | Fix the typo in the gpio-keys-polled compatible string. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use rfkill for wps button on wlan only boardsMathias Kresin2016-10-157-29/+8
| | | | | | | | | | | | | All of the touched boards don't have an ethernet port. Allow to use the wps button on these boards to enable the wireless radio after boot. The force enabled wireless for the DCH-M225 is removed. It is reckless to bring up an unencrypted wireless network by default these days. Using the wps button to bring up the radio seam to me the better approach. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use rootfs splitter and new image build code for BR-6475NDMathias Kresin2016-10-152-43/+11
| | | | | | | Use the edimax uImage splitter instead of the fixed size rootfs partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: move edimax images to the new build codeMathias Kresin2016-10-153-32/+37
| | | | | | | | | | | | | | | | Images installed via TFTP recovery or the Edimax webinterface of the 3g-6200n(l) are writting with the edimax header to flash. Use only one image type for these boards. The migration to the factory only images need to be done via TFTP recovery. Use the same start address for the 3g-6200n(l) factory images as the stock firmware images. Thanks to Jan Dostrasil for reporting all the issues of the 3g-6200nl and the patient testing of all changes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: mtdsplit_uimage: fix Edimax parserMathias Kresin2016-10-151-13/+7
| | | | | | | | | | | | | | According to the author the code was added to in preparation for adding support for a new board. The patch for the board was never send and the code never really tested. The edimax header starting with the edimax magic is put in front of the uImage header. There is no special uImage header used. Means, default magic and the type field is set to kernel as usual. Signed-off-by: Mathias Kresin <dev@kresin.me> edimax parser fix
* kernel: mtdsplit_uimage: fix rootfs offsetMathias Kresin2016-10-151-1/+1
| | | | | | | | The return value of the find_header function need to be added to the uimage_size, otherwise mtd_find_rootfs_from() might search for a rootfs within a custom header and fails. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: improve edimax 6200n/nl supportMathias Kresin2016-10-154-12/+20
| | | | | | | | | | Assign the reset functionality to the wps/reset buttons. Use the wlan switch of the 6200n to enable/disable wlan. Add the internet led of the 6200nl and use the led for boot status indication Signed-off-by: Mathias Kresin <dev@kresin.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 06:56:28 +0000