aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump kernel 4.4 to version 4.4.137Hauke Mehrtens2018-06-1530-7/+32
| | | | | | | | | | | | The new option CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE was added, in this commit: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.4.y&id=ffe4bf3eb3cfa10f9ef295c08c21f4fe3bb07e21 Handle it by setting it to the opposite value CONFIG_CC_OPTIMIZE_FOR_SIZE is set to. Tested on lantiq Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump kernel 4.4 to 4.4.135 for 17.01Hauke Mehrtens2018-06-0268-282/+284
| | | | | | * Refreshed patches Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: Deactivate build of Netgear WNR2000v3Hauke Mehrtens2018-06-021-1/+2
| | | | | | | | | This devices always looses the settings after power loss, nothing is been saved. Deactivate building this image till this problem is fixed. See FS#672 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: Add support for WRT3200ACM with new NAND flashImre Kaloz2018-06-021-0/+2
| | | | | | | | Newer Linksys boards might come with a Winbond W29N02GV which can be configured in different ways. Make sure we configure it the same way as the older chips so everything keeps working. Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
* brcm47xx: add switch port mapping to Asus WL-500WMirko Parthey2018-05-291-1/+1
| | | | | | | | | | | Switch ports 0..3 are connected to external ports LAN{1..4} in sequence, switch port 4 is not used, and switch port 5 is connected to the CPU. The WAN port is attached to the CPU's second network interface; it has no connection to the internal switch. Reuse the "Dell TrueMobile 2300" entry, which describes the same mapping. Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
* apm821xx: Add default packages to NAND targetChris Blake2018-05-273-8/+9
| | | | | | | | | | This moves core router packages to the NAND target, to ensure they are applied to all images. This change is being done due to an issue found when flashing the MX60W image, which came without these when built as a multi image. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> (cherry picked from commit d1c3a9485a90fff9bf7083faba4138e14dcdae7d)
* kernel: bump kernel 4.4 to 4.4.132 for 17.01Etienne Haarsma2018-05-225-9/+9
| | | | | | | | | * Refreshed patches Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
* kernel: use accepted version of bcm47xxpart fix commitRafał Miłecki2018-05-141-1/+6
| | | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 404508001e9f2bbf09fc4c4027cf16b8720124db)
* bcm53xx: backport the first bunch of 4.18 BCM5301X patchesRafał Miłecki2018-05-1210-5/+931
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: fix and improve ALFA Network Tube2H supportPiotr Dymacz2018-05-091-1/+12
| | | | | | | | | Fix ART offset (make it universal for 8/16 MB versions of the board) and while at it, include also GPIO setup for h/w watchdog (EM6324QYSP5B). Fixes: FS#1532 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel: bump kernel 4.4 to 4.4.131 for 17.01Etienne Haarsma2018-05-078-33/+33
| | | | | | | | | * Refreshed patches Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
* kernel: add missing in6_dev_put_clear call to an ipv6 network patchFelix Fietkau2018-05-041-4/+12
| | | | | | | | | | | | | | Fixes "unregister_netdevice: waiting for lo to become free. Usage count = 1" messages which started appearing since the update to 4.4.103. That problem was exposed by upstream commit 76da0704507bb ("ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER") backported to 4.4.x branch in 2417da3f4d6bc. Fixes: 2b664499cd622 ("kernel: bump 4.4 to 4.4.103 for 17.01") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 58f7b5b96c301176d639540df4723c798af2a999)
* kernel: bump kernel 4.4 to 4.4.129 for 17.01Etienne Haarsma2018-04-3042-134/+134
| | | | | | | | | * Refreshed patches Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
* ar71xx: Ubiquiti Airmax M: add relocate-kernel to invalidate cacheMatthias Schiffer2018-04-261-0/+1
| | | | | | | | | | | | | | Some Ubiquiti U-boot versions, in particular the "U-Boot 1.1.4.2-s956 (Jun 10 2015 - 10:54:50)" found with AirOS 5.6, do not correctly flush the caches for the whole kernel address range after decompressing the kernel image, leading to hard to debug boot failures, depending on kernel version and configuration. As a workaround, prepend the relocate-kernels loader, which will invalidate the caches after moving the kernel to the correct load address. Reported-by: Andreas Ziegler <dev@andreas-ziegler.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* brcm47xx: backport upstream patches for Netgear WNR1000 V3Rafał Miłecki2018-04-236-46/+128
| | | | | | | | This includes fix for reading NVRAM content. (cherry picked from commit b1f5dd34ed84b295a67934a64d2ab309db65b65e) Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump kernel 4.4 to 4.4.126 for 17.01Stijn Segers2018-04-1432-130/+96
| | | | | | | | | * Refreshed patches Compile-tested: ar71xx, ramips/mt7621, x86/64 Run-tested: ar71xx Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* kernel: mtd: bcm47xxpart: improve handling TRX partition sizeRafał Miłecki2018-04-121-0/+65
| | | | | | | | | | | | | | | | This is important fix for flash parsing in some corner cases. In case of TRX subpartition with rootfs being aligned to the flash block size it was incorrectly registered twice. Detecting & registering it as a standalone partition was resulting in an incorrect "firmware" partition size and possibly broken sysupgrade. It wasn't noticed before because "rootfs" alignment depends on a kernel size. It can happen though - depending on the configuration and the kernel size. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f5195e72c0fcf2949f7d6296a5db081eb58f8e32)
* ar71xx: sysupgrade: improve CPE/WBS 210/510 validation, add new metadata offsetMatthias Schiffer2018-04-101-12/+20
| | | | | | | | | Previously, tplink_pharos_check_image() would accept any image with ELF magic and only non-printable data in the support-list, as in this case the while-read loop would not run at all. Add the new support-list offset and ensure an image is only accepted when the model string is actually found. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: backport commit reverting genirq patch causing regressionsRafał Miłecki2018-04-051-0/+37
| | | | | | | | | | | | | | | | | | | Switching from kernel 4.4.120 to 4.4.124 introduced a regression in the genirq code. It was caused by a commit 9d0273bb1c4b6 ("genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"). On bcm53xx it breaks serial console and results in a flood of: [ 22.078829] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio) [ 22.086432] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio) [ 22.601150] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio) [ 22.608845] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio) Later in the upstream "linux-4.4.y" branch that commit was reverted and it was followed by a 4.4.126 release. Until we switch from 4.4.124 to 4.4.126 (or newer), let's backport that reverting commit. Fixes: bed0ee7cbfaa5 ("Kernel: bump 4.4 to 4.4.124 for 17.01") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: add Luxul XAP-1500 and XWR-1750 WiFi LEDsRafał Miłecki2018-04-032-2/+88
| | | | | | (cherry picked from commit 16efb0c1c6c7702e694aef8f297b57b7c10b98c1) Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Kernel: bump 4.4 to 4.4.124 for 17.01Stijn Segers2018-04-0118-168/+140
| | | | | | | | | | * Refreshed patches * Removed 087-Revert-led-core-Fix-brightness-setting-when-setting-.patch (applied upstream) Compile-tested on ar71xx, ramips/mt7621, x86/64 Run-tested on ar71xx Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* kernel: merge a pending fix for HFSC warnings/slowdowns (fixes FS#1136)Felix Fietkau2018-03-113-3/+89
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* generic: revert broken LED core patchMatthias Schiffer2018-03-081-0/+28
| | | | | | | | | At least on some devices, LEDs don't work anymore since kernel 4.4.120. Revert the broken change. See also: https://www.spinics.net/lists/stable/msg223656.html Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: bump 4.4 to 4.4.120 for 17.01Stijn Segers2018-03-0418-68/+61
| | | | | | | | | Bump the 4.4 kernel for the 17.01 release to 4.4.120. Refresh patches. Compile-tested: ar71xx, ramips/mt7621, x86/64 Run-tested: ar71xx, x86/64 Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* x86: add preinit hook to reload microcodeZoltan HERPAI2018-03-041-0/+10
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* x86: enable microcode loading for Intel and AMDZoltan HERPAI2018-03-041-1/+4
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sunxi: disable LPAE to allow kernel to run on A13Matteo Scordino2018-02-271-22/+2
| | | | | | | | | Fixes issue FS#1355. LPAE extensions are enabled, but the A13 does not support them. The result is the boot process stopping at "Starting kernel ..." Fixes: 468735c3a2f7 ("target: sunxi: enable kvm support") Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
* bcm53xx: fix fallback code for picking status LEDRafał Miłecki2018-02-271-1/+1
| | | | | | | | Looking for a wrong LED file name was stopping this code from find any LED. This affects devices with only a red/amber power LED. Fixes: 3aaee1ba023ac ("bcm53xx: failsafe support") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update 17.01 kernel to 4.4.116Stijn Segers2018-02-2029-239/+124
| | | | | | | | | | | | | | | | | | This bumps the 4.4. kernel in LEDE 17.01 to 4.4.116. More Meltdown & Spectre mitigation. * Refresh patches. * Refresh x86/config for RETPOLINE. * Deleted 8049-PCI-layerscape-Add-fsl-ls2085a-pcie-compatible-ID.patch (accepted upstream) * Deleted 8050-PCI-layerscape-Fix-MSG-TLP-drop-setting.patch (accepted upstream) * 650-pppoe_header_pad.patch does not apply anymore (code was replaced). Bumps from 4.4.113 to 4.4.115 were handled by Kevin Darbyshire-Bryant. Compile-tested on: ar71xx, ramips/mt7621, x86/64 Run-tested on: ar71xx, ramips/mt7621, x86/64 Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* kernel: refresh patchesKoen Vandeputte2018-02-187-57/+18
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: backport raw-ip mode for newer QMI LTE modemsKoen Vandeputte2018-02-187-0/+701
| | | | | | | | | | | | | | Backport support for raw-ip mode including all known fixes afterwards. Newer LTE modems only tend to support this mode, which was only introduced in kernel 4.5. Also backport support for the Quectel EC2x LTE modem series which is a very popular device. No custom changes were needed in order to apply these patches. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: backport mt7530/762x switch fixesJo-Philipp Wich2018-02-151-20/+239
| | | | | | | | | | dc7a1e8555 ("ramips: fix reporting effective VLAN ID on MT7621 switches") 341b1427fc ("ramips: properly map pvid for vlans with remapped vid on mt7530/762x switches") bb4002c79d ("ramips: don't clobber vlans with remapped vid on mt7530/762x switches") Fixes FS#991, FS#1147, FS#1341 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: remove bs-partition ro-flag for UniFi ACDavid Bauer2018-02-111-1/+1
| | | | | | | | | | | | This removes the read-only flag from the bs (bootselect) partition on UniFi AC devices. This allows to correct the indicator from which partition the device is booting its kernel from. See also: - https://github.com/freifunk-gluon/gluon/issues/1301 - https://bugs.lede-project.org/index.php?do=details&task_id=662 Signed-off-by: David Bauer <mail@david-bauer.net>
* ar71xx: /lib/ar71xx.sh: add model detection for TP-Link TL-WR810NMatthias Schiffer2018-02-031-0/+3
| | | | | | Properly report the revision in /tmp/sysinfo/model. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: bump 4.4 to 4.4.112 for 17.01Kevin Darbyshire-Bryant2018-01-2212-165/+19
| | | | | | | | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: target/linux/generic/patches-4.4/030-2-smsc75xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch target/linux/generic/patches-4.4/030-3-cx82310_eth-use-skb_cow_head-to-deal-with-cloned-skb.patch target/linux/generic/patches-4.4/030-4-sr9700-use-skb_cow_head-to-deal-with-cloned-skbs.patch target/linux/generic/patches-4.4/030-5-lan78xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch CVEs completely or partially addressed: CVE-2017-5715 CVE-2017-5753 CVE-2017-17741 CVE-2017-1000410 Compile-tested: ar71xx Archer C7 v2 Run-tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 4.4 to 4.4.111 for 17.01Kevin Darbyshire-Bryant2018-01-172-3/+3
| | | | | | | | Refresh patches Tested-on: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ar71xx: Netgear WNR2000v4: do not include USB packages [17.01]Stijn Segers2018-01-131-1/+0
| | | | | | | | | The Netgear WNR2000v4 does not have a USB port. Hence, including USB packages into the default images is useless. It looks like the WNR2000v4 definition in master is OK. v2 fixes the silly typo in the patch title (WNR2000v4 instead of WNR200v4) Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ramips: fix lenovo newifi-y1 switch and LED configChuanhong Guo2018-01-092-3/+5
| | | | | | | | | | | | | | There are 3 ethernet ports on Y1. LAN1 on port1, LAN2 on port0 and WAN on port4. Use a standalone switch configuration to match this and use the switch trigger so that LAN LED could indicate the connetction status for both lan ports correctly. This patch also drop the internet led configuration, because there is a WAN led for port4 and eth0.2 isn't always used as WAN. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: firewrt: indicate boot status via LEDMathias Kresin2018-01-091-0/+1
| | | | | | | Add the Firefly FireWRT gree power LED to diag.sh to indicate the boot status via the power LED. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ag71xx: Fix rx ring buffer stall on small packets flood on qca956x and qca953x.Vittorio Gambaletta2018-01-093-1/+22
| | | | | | Backported from Code Aurora QSDK Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
* ar71xx: QCA956X: add missing registerHenryk Heisig2018-01-096-4/+66
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* mvebu: fix mvneta build with Linux 4.4.110Jo-Philipp Wich2018-01-089-54/+65
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 4.4.109 added pp->link, pp->duplex and pp->speed setters to mvneta_port_disable() which the mvneta patchset failed to patch out after rebasing, leading to the following build error: CC drivers/net/ethernet/marvell/mvneta.o drivers/net/ethernet/marvell/mvneta.c: In function 'mvneta_port_disable': drivers/net/ethernet/marvell/mvneta.c:1199:4: error: 'struct mvneta_port' has no member named 'link' pp->link = 0; ^ drivers/net/ethernet/marvell/mvneta.c:1200:4: error: 'struct mvneta_port' has no member named 'duplex' pp->duplex = -1; ^ drivers/net/ethernet/marvell/mvneta.c:1201:4: error: 'struct mvneta_port' has no member named 'speed' pp->speed = 0; ^ Fix the issue by rebasing 134-net-mvneta-convert-to-phylink.patch to remove these struct member accesses as well. Fixes: 7f5a040359 ("kernel: update kernel 4.4 to version 4.4.110") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: update kernel 4.4 to version 4.4.110Hauke Mehrtens2018-01-0736-146/+147
| | | | | | This fixes: CVE-2017-5754 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm47xx: relocate the stack in loaderHauke Mehrtens2018-01-062-2/+4
| | | | | | | | | | | By default we are reusing the stack provided by CFE, like it is intended by CFE. On my WRT54GS it is located at 0x8043BF30, so a big kernel image could overwrite it. Relocate it to a different memory region which is still under the 8MB RAM, but in the higher area. We only need this memory region for the stack of the loader, Linux will set up this for its own. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm47xx: relocate loader to higher addressHauke Mehrtens2018-01-061-1/+1
| | | | | | | | | | | | | | | | | | | | | The boot process on a WRT54GL works the following way: 1. CFE gets loaded by the boot rom from flash 2. CFE loads the loader from the flash and gzip uncompresses it 3. CFE starts the loader 4. The loader stores the FW arguments and relocates itself to BZ_TEXT_START (now 0x80600000) 5. The loader reads the Linux image from flash 6. The loader lzma decompresses the Linux image to LOADADDR (0x80001000) 7. The loader executes the uncompress Linux image at LOADADDR The BZ_TEXT_START was set to 0x80400000 before. When the kernel gets uncompressed and is bigger than BZ_TEXT_START - LOADADDR it overwrote the loader which was currently uncompressing it and made the board crash. Increase the BZ_TEXT_START my 2 MB to have more space for the kernel. Even on 16MB RAM devices the memory goes till 0x80FFFFFF so this should not be a problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm47xx: image: build firmware for Asus WL-500g DeluxeRafał Miłecki2018-01-021-0/+8
| | | | | | | | It's a device based on BCM5365P (0x5365 package 0x00). This SoC has USB 1.1 controller but device has two USB 2.0 parts. They are handled by PCI-based controllers: 1106:3038 UHCI and 1106:3104 EHCI. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 4.4 to 4.4.108 for 17.01Kevin Darbyshire-Bryant2017-12-302-3/+3
| | | | | | Refresh patches. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ramips: fix widora neo diag ledMathias Kresin2017-12-291-2/+4
| | | | | | | The diag LED is named widora:orange:wifi and can't be derived from the boardname. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.4 to 4.4.107Etienne Haarsma2017-12-2324-82/+82
| | | | | | | | | | | | | Bump 4.4 to 4.4.107 and refreshed all patches. Made the following patch for Mediatek and Oxnas compatible with kernel 4.4.107: 0072-mtd-backport-v4.7-0day-patches-from-Boris.patch Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com> Reviewed-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Rosen Penev <rosenp@gmail.com>
* brcm47xx: remove target specific network preinit configJo-Philipp Wich2017-12-132-32/+0
| | | | | | | | | | The generic preinit code is now able to setup network and switch vlan settings from the /etc/board.json file, therefor drop the target specific code. Fixes FS#790. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 833c500cb2985e9b76a1aae3b6a577977eee5457)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 20:52:50 +0000