aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* apm821xx: backport generic HDD led-triggers for WNDR4700 and MBLChristian Lamparter2016-09-084-0/+232
| | | | | | | This patch backports the new generic HDD/SDD led-trigger from 4.8-rc1. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: detect sd-card media changes for the WNDR4700Christian Lamparter2016-09-082-1/+20
| | | | | | | | | The insertion or removal of the sd-card cannot be detected by the hardware itself. This is by design. To workaround this, for the WNDR4700 unload/load the dwc2 module in case the the special SD CARD GPIO line is low/high. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* cns3xxx: add GW2386 supportTim Harvey2016-09-081-0/+20
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* cns3xxx: add GW2394 SupportTim Harvey2016-09-081-1/+3
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: backport upstream overlayfs fixesRafał Miłecki2016-09-067-0/+749
| | | | | | | | | | | First two patches weren't marked for stable but are dependencies for laters ones. The rest of patches was marked for stable but most likely will be backported to 4.5+ only so we need to get them on our own. An important fix is eea2fb4851e9d ("ovl: proper cleanup of workdir") as it allows mounting overlayfs with dirty workdir, e.g. after power cut. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* apm821xx: add size check for initramfs kernel for the Meraki MR24Christian Lamparter2016-09-051-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Russell Senior reported an issue with the MR24 initramfs kernels: > ## Booting kernel from Legacy Image at 00c10000 ... > Image Name: POWERPC LEDE Linux-4.4.19 > Created: 2016-08-31 11:57:05 UTC > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 2155723 Bytes = 2.1 MiB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK >Wrong Ramdisk Image Format >Ramdisk image is corrupt or invalid For the MR24, the kernel is uploaded to 0x10000. The ramdisk starts at 0x200000. This leaves the kernel with just 0x1f0000 bytes = 1984kb. This patch adds a size check so the image creation script will abort instead of producing a unbootable initramfs image. A separate patch "apm821xx: Fix initramfs image for the Meraki MR24" which fixed the reported issue was submitted earlier. Cc: Russell Senior <russell@personaltelco.net> Cc: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: Fix initramfs image for the Meraki MR24riptidewave932016-09-051-1/+1
| | | | | | | When gzip is used, our kernel is too large and this causes the ramdisk to be at the wrong offset. Fix by moving to lzma. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* imx6: enable ARM crypto accelerationKoen Vandeputte2016-09-041-0/+19
|
* imx6: refresh kernel configKoen Vandeputte2016-09-041-7/+0
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* generic: add NET3380 UDC supportTim Harvey2016-09-041-0/+262
| | | | | | | | Add a patch to backport 5185c91385d73cdf79836eb8548e4726e43ae831 from Linux 4.8 adding USB2380 support to the NET2280 driver and create an OpenWrt menu option to select it as a module. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: add GW553x supportTim Harvey2016-09-045-1/+605
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Gateworks Ventana GW553x is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * small form factor (35x70mm) * 512MB DDR3 DRAM (2x32bit) (options up to 2GB) * 256MB NAND flash (4GB option) * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCI socket (with PCIe, USB, SIM) * 1x microSD socket * 1x SIM socket * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * analog CVBS video in * GPS (optional uBlox EVA-M8M) * Application headers: - 2x TTL UART (TX/RX) - 4x TTL GPIO (3x configurable as PWM) - 3x CVBS Analog video input (1x decoder with 3x selectable inputs) * Front panel connectors: * micro-HDMI audio/video out - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG See http://www.gateworks.com for more info Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* build: fix subtarget descriptionsFelix Fietkau2016-09-0421-60/+58
| | | | | | Move Target/Description above the target.mk include Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: add mem=128M to stg-212 built-in cmdline for legacy u-bootDaniel Golle2016-09-041-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: add method to extract mac_adr from legacy cmdlineDaniel Golle2016-09-042-0/+34
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: kd20: generate image compatible with stock firmwareDaniel Golle2016-09-042-6/+47
| | | | | | | | * adjust MTD partitions to match vendor's scheme * generate *factory.tar.gz image compatible with stock web-if firmware upgrade interface Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: allow booting with legacy loadersDaniel Golle2016-09-044-23/+387
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ar71xx: fix ethernet driver fast reset issue causing tx timeoutsFelix Fietkau2016-09-031-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix legacy initramfs imagesFelix Fietkau2016-09-031-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: use ptgen instead of fdisk to make the clearfog image script more ↵Felix Fietkau2016-09-021-55/+17
| | | | | | portable Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: add sdcard image creation scriptJosua Mayer2016-09-023-2/+153
| | | | | | | | | | | | | | | | Added gen_mvebu_sdcard_img.sh to facilitate creating an fixed-size sdcard image, adding the bootloader and populating it with actual data. Added the required rules for creating a 4GB sdcard image according to this layout: p0: boot (fat32) p1: rootfs (squashfs) p2: rootfs_data (ext4) This should be generic to any mvebu boards that can boot from block storage. Added the new sdcard image to the Clearfog image profile. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* mvebu: clearfog: require uboot-mvebu-clearfogJosua Mayer2016-09-022-1/+2
| | | | | | | | | The u-boot variant for the clearfog is provided by the uboot-mvebu-clearfog, and not by the generic uboot-mvebu packae. Make sure the clearfog variant is selected when building for it. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: disable EOF markers on UBIFelix Fietkau2016-08-311-0/+1
| | | | | | The boot loader does not recognize them and might mess up the volume Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: enable fpu for all subtargetsFelix Fietkau2016-08-302-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: add fpu to featuresJosua Mayer2016-08-301-1/+1
| | | | | | | This triggers HAS_FPU=y, and unsets CONFIG_SOFT_FLOAT. Considering all mvebu boards have an fpu, this is the desirable behaviour. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: enable ARM crypto accelerationFelix Fietkau2016-08-301-0/+19
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: enable NEON supportFelix Fietkau2016-08-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: make MMC driver for Clearfog builtinJosua Mayer2016-08-301-0/+5
| | | | | | | | microSD is the primary boot media for the Clearfog Pro board, and should work unconditionally. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* mvebu: refresh kernel configFelix Fietkau2016-08-301-5/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: spi-nor: add support for ESMT_f25l32qa and ESMT_f25l64qaFelix Fietkau2016-08-303-2/+23
| | | | | | | | Add Support for the ESMT_F25L32QA and ESMT_F25L64QA. These are 4MB and 8MB SPI NOR Chips from Elite Semiconductor Memory Technology Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: make serial port sysrq-disable patch more generic (FS#112)Felix Fietkau2016-08-293-25/+26
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: generate US- and EU-specific images for the Archer C7 v2Matthias Schiffer2016-08-281-1/+3
| | | | | | | | | | | | TP-Link has started providing US- and EU-specific stock firmwares that only allow upgrading to firmwares with the same region code. Provide factory images for both these regions. To avoid confusing users outside these regions, we still provide a "universal" factory.bin without a region code, although flashing either of the US and EU images would work as well. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* arc770: Introduce images for SD-cardsAlexey Brodkin2016-08-288-73/+102
| | | | | | | | | | | | | | | | | | | Historically on ARC we started from initramfs-based images because: a) It was much easier to debug especially when toolchain and other components were changing quite dynamically b) It was our usual approach for embedded Linux But now with ARC port of Lede/OpenWRT getting more stable and mature we're ready for more real-life scenarios with FS permanently stored on SD-card. This essentially benefits from ability to setup devices that survive reboots with all settings and extra packages kept in place. Still we keep an ability to build images with initramfs. This allows us to use storage-less simulators for testing still. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org> Cc: Jo-Philipp Wich <jo@mein.io>
* arc770: Remove MMC kernel modules, they are built-in nowAlexey Brodkin2016-08-282-2/+2
| | | | | | | | If we want to boot from SD-card we need to have corresponding drivers already built-in so there's no point in having these modules. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* arc770: Update kernel configurationAlexey Brodkin2016-08-281-1/+9
| | | | | | | | | | | | | | Now when we're switching to FS on SD-card it's necessary to have full stack of MMC block & FC drivers built-in otherwise kernel won't be able to mount FS with needed modules. Also we enable parsing of input parameters passed to the kernel by U-Boot. Otherwise kernel won't know where to look for command line and what's worse device tree blob (we had to disable this by default for cases when kernel is loaded by JTAG and core registers may have undefined state lading to kernel going bonkers). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* arc770: Reduce generalizationAlexey Brodkin2016-08-281-25/+13
| | | | | | | | | | | | | | As support of ARC 770 in OpenWRT/Lede matures we don't need debug-only output binaries any longer, so purging vmlinux for AXS10x boards. As for uImage for nSIM it makes completely no sense because there's no way to run U-Boot on nSIM. So we remove add_arcYYY_XXX scripts making code more compact and cleaner. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* bcm53xx: use the latest 6th version of ILP clock driver patchRafał Miłecki2016-08-262-44/+67
| | | | | | It still wasn't accepted, so don't switch to 0xx prefix yet. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport clk *_hw_* API for registering struct clk_hwRafał Miłecki2016-08-262-0/+416
| | | | | | | Drivers have been modified to use it and new ones have to be written this way, so we need it for backporting code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: disable flow control to the built-in switch on AR934xFelix Fietkau2016-08-251-1/+0
| | | | | | | It apparently causes a regression on some devices if the ethernet cable is plugged in while booting. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix ath5k EEPROM loadingMathias Kresin2016-08-241-9/+27
| | | | | | | | | | With 12fe4b579801ea812b64fc7e689716cd39c895ec I switched the ath5k eeprom extraction to an alternate code path. Unfortunately this code seams to be broken since ages and broke the ath5k EEPROM extraction. Reported-by: Mohammed Berdai <mohammed.berdai@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> Acked-by: John Crispin <john@phrozen.org>
* linux/arc*: disable MAC frame filter in DW GMACAlexey Brodkin2016-08-242-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | DW GMAC on ARC SDP boards doesn't enter promiscuous mode if Ethernet PHY haven't got established link. Good examples are auto-negotiation in progress or disconnected cable. We do see Linux kernel sets GMAC's MAC filter register properly but GMAC's hardware doesn't accept new settings. We believe it is a hardware issue, most probably problem of integration of DW GMAC and PHY on the board. As a work-around we completely disable frame filtering in GMAC hardware (once and for good) which forces GMAC to enter promiscuous mode with the first write to MAC filter register. That gives us working bridge that consists of eth0 and wlan0 (USB Wi-Fi dongle). I.e. we finally have working "Dumb AP" setup made of ARC AXS10x boards. Given that hack is quite dirty (in loaded wired networks this will effectively load CPU with junk packets even if user doesn't need promisc mode) and there's no indication any other boards with DW GMAC suffer from the same issue we're patching only kernel for ARC boards. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org>, Cc: Felix Fietkau <nbd@nbd.name>
* ipq806x: fix ipq8065 s2a/s2b regulator frequency (fixes ethernet performance)Roman Yeryomin2016-08-241-2/+2
| | | | Signed-off-by: Roman Yeryomin <roman@advem.lv>
* ipq806x: Archer C2600: Renaming LED accordance with the standardCezary Jackiewicz2016-08-243-20/+20
| | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
* ipq806x: enable ondemand governorJohn Crispin2016-08-241-1/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: backport patch for specifying USB ports/devices in DTRafał Miłecki2016-08-242-0/+287
| | | | | | | | This allows referencing USB ports/devices that are always present in a device. This applies to some internal devices, root hub ports and internal USB hubs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: rename R7800 device tree file, merge R7500v2 dts additionJo-Philipp Wich2016-08-244-13/+4
| | | | | | | The R7800 is an IPQ8065, so rename its dts file to reflect that fact. Also fold the R7500v2 dts addition into the existing 800-devicetree.patch. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* realview: rename config-default to config-4.4Stijn Tintel2016-08-241-0/+0
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* rb532: rename config-default to config 4.1Stijn Tintel2016-08-241-0/+0
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* orion: rename config-default to config-3.18Stijn Tintel2016-08-241-0/+0
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* gemini: rename config-default to config-4.4Stijn Tintel2016-08-241-0/+0
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* arm64: rename config-default to config-4.4Stijn Tintel2016-08-241-0/+0
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>