aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: unify LED names on D-Link boardsGabor Juhos2012-01-3110-63/+61
| | | | SVN-Revision: 29974
* ar71xx: support for D-LINK DIR-615 rev. E4Gabor Juhos2012-01-3115-7/+428
| | | | | | | | | | | | | | | | | | | | This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> SVN-Revision: 29973
* ar71xx: add support for TP-Link TL-MR11UGabor Juhos2012-01-3114-7/+272
| | | | | | | | | | | | | | | | | | | Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> SVN-Revision: 29972
* ar71xx: compress kernel binaries in Image/Prepare stageGabor Juhos2012-01-311-2/+2
| | | | | | The lzma compressed kernel is used by one of the loaders. SVN-Revision: 29971
* ar71xx: use dynamically allocated partitions in wrt160nl_partGabor Juhos2012-01-312-5/+15
| | | | SVN-Revision: 29970
* ramips: change vlan_config for the ALFA W502U boardGabor Juhos2012-01-311-1/+1
| | | | | | This change moves the WAN port into a separate VLAN. SVN-Revision: 29969
* kernel: update linux 3.2 to 3.2.2Jonas Gorski2012-01-317-23/+13
| | | | SVN-Revision: 29967
* kernel: update linux 3.1 to 3.1.10Jonas Gorski2012-01-314-4/+4
| | | | SVN-Revision: 29966
* kernel: update linux 3.0 to 3.0.18Jonas Gorski2012-01-319-10/+10
| | | | SVN-Revision: 29965
* build 96348R imagesFlorian Fainelli2012-01-301-0/+1
| | | | SVN-Revision: 29960
* remove support for 2.6.39Florian Fainelli2012-01-3040-5202/+0
| | | | SVN-Revision: 29959
* bump to 3.0.17Florian Fainelli2012-01-301-1/+1
| | | | SVN-Revision: 29958
* add missing config symbolsFlorian Fainelli2012-01-302-0/+10
| | | | | | Thanks KanjiMonster SVN-Revision: 29955
* fix gpiommc build failure with 3.2Florian Fainelli2012-01-301-1/+2
| | | | SVN-Revision: 29954
* create a config-3.2 for upcoming changes, rebase config-default to 2.6.39Jo-Philipp Wich2012-01-302-130/+442
| | | | SVN-Revision: 29953
* add default and Sim.One profilesFlorian Fainelli2012-01-292-0/+39
| | | | SVN-Revision: 29942
* add 3.2 supportFlorian Fainelli2012-01-295-1/+1528
| | | | SVN-Revision: 29941
* add another 3.2 framebuffer symbolFlorian Fainelli2012-01-291-0/+1
| | | | SVN-Revision: 29940
* add support for 3.2 kernelFlorian Fainelli2012-01-295-1/+319
| | | | SVN-Revision: 29939
* add support for the Atheros AP113 reference boardFlorian Fainelli2012-01-2814-12/+316
| | | | | | | | | This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch SVN-Revision: 29935
* refresh 3.2 patchesFlorian Fainelli2012-01-2812-19/+20
| | | | SVN-Revision: 29934
* brcm47xx: add fix for cardbus host controllerHauke Mehrtens2012-01-272-0/+44
| | | | | | These devices have two devices on the bus, the host controller itself and the device. SVN-Revision: 29923
* ar71xx: use 64k block size for WZR-HP-AG300HGabor Juhos2012-01-271-1/+1
| | | | SVN-Revision: 29917
* ar71xx: fix sysupgrade image building of atheros boards after r29899Gabor Juhos2012-01-271-10/+10
| | | | SVN-Revision: 29916
* ar71xx: create the temporary directory before building initramfs imagesGabor Juhos2012-01-261-1/+1
| | | | | | Thanks to Florian for reporting. SVN-Revision: 29915
* ar71xx: create a profile and build images for Compex WPE72Gabor Juhos2012-01-262-0/+17
| | | | | | | | | [juhosg: remove ath9k from the the profile package list, build WPE72 image with the Default profile as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29914
* ar71xx: add support for Compex WPE72/WPE72NXGabor Juhos2012-01-2611-4/+230
| | | | | | | | | | | This patch adds support for Compex WPE72 bare board and Compex WPE72NX Indoor Access Point. [juhosg: add support to 3.2 as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29912
* generic: add WPE72 ID to myloader.hGabor Juhos2012-01-261-0/+1
| | | | | | Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29911
* ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boardsGabor Juhos2012-01-2611-0/+212
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 29910
* ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and ↵Gabor Juhos2012-01-255-4/+7
| | | | | | | | | | | | | | | | | | | | | modify LED behaviour This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29905
* ar71xx: TL-MR3020: fix GPIO polarity for button and switchGabor Juhos2012-01-252-6/+6
| | | | | | | | | | This patch fixes the GPIO polarity for the button and the sliding switch. The buttons are not active low. "Pressed" and "Released" events are wrong without the patch. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29904
* ar71xx: use the lzma loader on the Planex boardsGabor Juhos2012-01-241-3/+20
| | | | SVN-Revision: 29900
* ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImageGabor Juhos2012-01-241-12/+12
| | | | SVN-Revision: 29899
* ar71xx: fix the AP/Router LED definitons on MZK-W300NHGabor Juhos2012-01-242-16/+12
| | | | SVN-Revision: 29897
* ar71xx: preset WLAN LED config on MZK-W300NHGabor Juhos2012-01-241-0/+4
| | | | SVN-Revision: 29896
* ar71xx: remove hardcoded MTD layout from planex filesGabor Juhos2012-01-244-164/+4
| | | | SVN-Revision: 29895
* ar71xx: pass mtdlayout to Planex boards via command lineGabor Juhos2012-01-241-1/+2
| | | | SVN-Revision: 29894
* ar71xx: remove an unused header fileGabor Juhos2012-01-241-24/+0
| | | | SVN-Revision: 29893
* ramips: generate sysupgrade image for the ALL0256NGabor Juhos2012-01-241-0/+5
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29884
* ramips: add user-space support for ALL0256NGabor Juhos2012-01-246-1/+20
| | | | | | | | This adds uci-defaults and sysupgrade support for the ALL0256N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29883
* ramips: add kernel support for ALL0256NGabor Juhos2012-01-245-0/+136
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29882
* ar71xx: nuke fs_all variable in image/MakefileGabor Juhos2012-01-241-2/+0
| | | | SVN-Revision: 29880
* ar71xx: create interim kernel files in a separate dirGabor Juhos2012-01-241-66/+68
| | | | | | This reduces the size of the ImageBuilder tarball a lot. SVN-Revision: 29879
* ar71xx: prebuild all loaders in Image/Prepare stageGabor Juhos2012-01-241-2/+20
| | | | SVN-Revision: 29878
* ramips: scripts updatesGabor Juhos2012-01-236-23/+47
| | | | | | | | | | | | | | | | | | | | | | | | In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871
* ar71xx: 3.2: fix build errors if PCI is not enabledGabor Juhos2012-01-232-1/+19
| | | | SVN-Revision: 29870
* ar71xx: fix compiler warning if PCI is not enabledGabor Juhos2012-01-231-1/+1
| | | | SVN-Revision: 29869
* ar71xx: add initial support for 3.2Gabor Juhos2012-01-22200-0/+25484
| | | | | | | | | | | | | | | Tested on the following boards: ALFA AP96 TL-MR3220 v1 TL-WR1043ND v1 TL-WR2543ND v1 TL-WR703N v1 TL-WR741ND v1 TL-WR741ND v4 WNDR3700 v1 WZR-HP-G300NH SVN-Revision: 29868
* ar71xx: move arch specific files to files-2.6.39Gabor Juhos2012-01-22121-0/+0
| | | | SVN-Revision: 29867
* ar71xx: build ALFA AP96 images with default profile as wellGabor Juhos2012-01-221-0/+1
| | | | SVN-Revision: 29866
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 06:52:27 +0000