aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* usb: Remove annoying warning about bogus URBAlexey Brodkin2016-07-051-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When USB Wi-Fi dongle based on Atheros AR9271 is connected to OHCI (USB 1.1) controller following warnings flood debug console: ------------------------>8--------------------------- usb 1-1: new full-speed USB device number 2 using ohci-platform usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d2 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d3 ]--- ... ------------------------>8--------------------------- With removed warning Wi-Fi dongle works properly. Even though this is not the best solution it gets us a working Wireless AP. Anyways new discussion was started in linux-usb mailing list to find a proper solution instead of that hack. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* linux/archs38: Disable USB 2.0Alexey Brodkin2016-07-052-2/+2
| | | | | | | | | As of today USB 2.0 (AKA EHCI) doesn't work on axs103 board and so there's no reason to build corresponding software for it. Once USB 2.0 gets fixed on axs103 thi patch might be reverted. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* lantiq: mac address setting on BTHOMEHUBV3ABen Mulvihill2016-07-051-2/+1
| | | | | | | | | | Rename uboot environment partition on BT Home Hub 3A so that mac address setting works correctly. Also, the mac address field in the ath9k calibration data is not used, and should not be referenced in the dts. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
* tools: add kernel2minor utility for Mikrotik devicesSergey Sergeev2016-07-051-2/+2
| | | | | | | | This patch adds support of Mikrotik yaffs2 filesystem image for kernel file and tools/kernel2minor package. We neede this to boot kernel through RouterBoot on new Mikrotik NOR flash devices. Signed-off-by: Sergey Sergeev <adron@yapic.net>
* ramips: fix buffalo wmr-300 lan portJohn Crispin2016-07-051-2/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: fix nand device profileJohn Crispin2016-07-054-19/+19
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix MT7621 gsw handlingJohn Crispin2016-07-051-0/+31
| | | | | | based on https://forum.openwrt.org/viewtopic.php?pid=323671#p323671 Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix mt7621 SoC detectionJohn Crispin2016-07-051-0/+11
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* bcm53xx: calculate Seama MD5 using content of kernel partitionRafał Miłecki2016-07-041-1/+1
| | | | | | | We don't want checksum to cover any part of UBI as even its part with SquashFS may be changed due to e.g. flash wearing. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* Revert "bcm53xx: use uncompressed zImages"Rafał Miłecki2016-07-041-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit b3be33f135f447d56ef9a5461e7e675d5cc35730. CFE is known to fail in some non-standard cases, e.g. when using kernel or format different that what was tested by Broadcom. This kernel change triggered some problem with booting OpenWrt kernel stored in Seama. As long as Seama checksum was covering enough data, it was working fine. We need to change it however, because calculating MD5 over part of UBI containing SquashFS is unsafe. UBI may move PEBs depending on flash wearing level which would break CFE booting the image. For some reason this kernel change was breaking CFE. Calculating MD5 over 0x47ffc0 B data or less (there is 0x40 B long header) was stopping booting process at: Starting program at 0x00008000 As our kernel is usually 0x3fffc0 B it was affected by this problem. Reverting this change fixes sysupgrade (which already uses kernel size for MD5 calculation) and will allow us to adjust "fixseama" command call on the first boot. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* ipq806x: enable ath10k firmware for 988x, 99x0 and 9984 by defaultFelix Fietkau2016-07-041-2/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix up switch settings for Sitecom WL-351 v1 002John Crispin2016-07-034-2/+93
| | | | | | | | | Pinmux for rgmii needs to be set to rgmii, not gpio. Hide the ESW switch on boot (using new rgmii esw devicetree attribute). Also add a Sitecom-specific profile, since the image needs to include the rtl8366 kernel driver. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
* x86: enable kmod-igb on 64-bit by defaultFelix Fietkau2016-07-031-1/+1
| | | | | | It is used on APU2 devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: stop relying on hexdump for image build signatureFelix Fietkau2016-07-031-1/+1
| | | | | | | Use perl to generate random number instead. See https://github.com/freifunk-gluon/gluon/issues/811 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix redundant PROFILES overrides in image makefileFelix Fietkau2016-07-021-2/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix build breakage introduced in 9e41c3f54e3cFelix Fietkau2016-07-021-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix image makefile indentation for Device/ sectionsFelix Fietkau2016-07-021-40/+40
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix build of kmod-udptunnel4 and kmod-udptunnel6Hauke Mehrtens2016-07-023-0/+33
| | | | | | | | | | The kernel config option CONFIG_NET_UDP_TUNNEL is not visible and can not directly be activated. When kmod-udptunnel4 or kmod-udptunnel6 are build these packages could be empty when no other kernel module selects CONFIG_NET_UDP_TUNNEL. Reported-by: Baptiste Jonglez <baptiste@bitsofnetworks.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: spi-rb4xx fix.Sergey Sergeev2016-07-021-1/+1
| | | | | | | | In new kernels we should use clk_prepare_enable instead of clk_enable since clk_enable does not make proper initialization that leads to rise WARN_ON messages and not working spi bus on the device. Signed-off-by: Sergey Sergeev <adron@yapic.net>
* ar71xx: prevent spurious ethernet resets from dma hang check false positivesFelix Fietkau2016-07-022-6/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: Fix ipv6 mc snooping if bridge has no ipv6 addressdaniel2016-06-301-0/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a backport for current LEDE 4.4 Kernels. It is already upstream, for linux-next and stable. The initial commit message is below: The bridge is falsly dropping ipv6 mulitcast packets if there is: 1. No ipv6 address assigned on the brigde. 2. No external mld querier present. 3. The internal querier enabled. When the bridge fails to build mld queries, because it has no ipv6 address, it slilently returns, but keeps the local querier enabled. This specific case causes confusing packet loss. Ipv6 multicast snooping can only work if: a) An external querier is present OR b) The bridge has an ipv6 address an is capable of sending own queries Otherwise it has to forward/flood the ipv6 multicast traffic, because snooping cannot work. This patch fixes the issue by adding a flag to the bridge struct that indicates that there is currently no ipv6 address assinged to the bridge and returns a false state for the local querier in __br_multicast_querier_exists(). Special thanks to Linus Lüssing. Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
* ar71xx: seama: fix making factory imagesYousong Zhou2016-06-303-58/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | rootfs part needs to be aligned to erase block size which is passed as the 6th argument to Image/Build/Seama and is now 65536 since commit commit 5119ee9 "ar71xx: fix bogus hardcoded kernel image size for Seama images (fixes #20585)", but $(($(6) - 64)) still assumes that the argument is a limit on kernel partition size, i.e. 1310720, so the generated factory image is wrong in that the kernel will fail to find the rootfs (FlySpray link at [1]) This patch will workaround it with the following steps 1. Calculate the required space for seama header and META data in step 5 2. Pre-padding 64 bytes to lzma-compressed loader 3. Generate correctly padded image-$(2).tmp 4. Strip out the padding 5. Seal it with seama utility While at it convert seama to new build method [1] FS#35 - mynet-n750 factory images don't find root partition, https://bugs.lede-project.org/index.php?do=details&task_id=35 Reported-by: Steven Haigh <netwiz@crc.id.au> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: unify indentation with 2 whitespacesYousong Zhou2016-06-301-112/+112
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: remove duplicate IMAGES definitionYousong Zhou2016-06-301-1/+0
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: hiwifi-hc6361: move packages selection to generic.mkYousong Zhou2016-06-302-14/+9
| | | | | | | Remove kmod-crypto-deflate and kmod-ledtrig-gpio as the device works the same by default without them Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ramips: disable the WP pin on the SDK mmc driverJohn Crispin2016-06-301-0/+21
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix pinmux typoJohn Crispin2016-06-301-0/+77
| | | | | Reported-by: Joy Kicer <joykicer@gmail.com> Signed-off-by: John Crispin <john@phrozen.org>
* kernel: Add option to make using filesystem ACL support the defaultDaniel Dickinson2016-06-303-1/+10
| | | | | | | This adds a configuration options that allows to make filesystem ACL support the default in the kernel, except for old nfs. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
* ramips: set correct LAN/WAN MAC addresses on DIR-860L B1Matthias Schiffer2016-06-301-0/+4
| | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Jo-Philipp Wich <jo@mein.io>
* ramips: add button support and make LEDs known to userspace for DIR-860L B1Matthias Schiffer2016-06-303-0/+16
| | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix fixseama call on first bootMatthias Schiffer2016-06-301-3/+3
| | | | | | | | | | | | | Commit "kernel: mtdsplit: calculate kernel partition precisely for Seama" changed the kernel partition to only contain the kernel itself and not the Seama header. Adjust the fixseama call to match what is used on brcm53xx. This fixes failing to boot a second time after flashing the factory image on the affected devices. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: further legacy image build fixesJo-Philipp Wich2016-06-271-1/+6
| | | | | | | - Add missing macro to trigger the generation of 64k padded squashfs images - Revert Zcomax image generation to use the prepared 64k squashfs image Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "lantiq: enable SMP for XRX200"Felix Fietkau2016-06-271-19/+0
| | | | | | | | | This reverts commit cc3bfdb62f941dff3e2983591c78b6d39ca8d88a. Apparently the ethernet driver is not SMP safe, as reported in https://bugs.lede-project.org/index.php?do=details&task_id=27 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: disable pdata->use_flow_control for QCA9558Felix Fietkau2016-06-271-1/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: rename ethernet pdata->builtin_switch to use_flow_controlFelix Fietkau2016-06-273-8/+8
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: merge profiles into image building codeJo-Philipp Wich2016-06-2759-2503/+959
| | | | | | | | | | | - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: fix missing break in ubi auto-mounting patchHauke Mehrtens2016-06-273-4/+7
| | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Jo-Philipp Wich <jo@mein.io>
* kernel: remove igb: Fix Null-pointer dereference patchHauke Mehrtens2016-06-263-120/+0
| | | | | | | This patch is already included in the Linux mainline kernel since v3.15, remove it from LEDE, see the lines directly before this patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: remove full cache flush in fuse_copy_do() for MIPSHauke Mehrtens2016-06-264-97/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch was introduced in commit r16412 for the brcm47xx target only and then moved to generic in commit r32395. It was initially added because of ticket #5186 and should fix some problems with fuse file systems and MIPS caches. The commit comment in r32395 says that this a generic problem in MIPS CPUs, but does not name any specifics about that. There was a fix added to kernel 2.6.21 in commit commit 7575a49f20 "[MIPS] Implement flush_anon_page()." that should fix this problem, but that was already available before both commits were done to OpenWrt. I just tested fuse with ntfs.3g without this patch on a BCM4704 (BMIPS3300 V0.6) SoC and haven't seen any problems. Someone reported that removing this patch improves some fuse operations by 5 times on some modern MIPS cores. My test was only a simple "dd if=/dev/zero of=/mnt/zero bs=5000" to an USB stick. This patch removes the patch to OpenWrt, because I assume that it is not needed any more and Felix, the orginal author, also thinks so. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: remove one of two patches deactivating broken vdso support on mipsHauke Mehrtens2016-06-261-9/+0
| | | | | | | The patch target/linux/generic/patches-4.4/206-mips-disable-vdso.patch should be sufficient. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update to version 4.4.14Hauke Mehrtens2016-06-2646-1052/+559
| | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14 Some manual changes to target/linux/generic/patches-4.4/610- netfilter_match_bypass_default_checks.patch were needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "ar71xx: prevent spurious ethernet resets from dma hang check false ↵Felix Fietkau2016-06-262-6/+5
| | | | | | positives" This reverts commit 3d58d7f053eae83b59baf5c8b8a58da78653f605.
* ar71xx: prevent spurious ethernet resets from dma hang check false positivesFelix Fietkau2016-06-262-5/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: enable flow control for ethernet MACs with built-in switchFelix Fietkau2016-06-263-1/+11
| | | | | | | | Should fix LAN speed issues on some devices. This is an updated version of the previously reverted commit with the same name. It improves the check for MACs connected to a built-in switch Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "ar71xx: fix legacy image building"John Crispin2016-06-2359-938/+2492
| | | | | | | | | | | | | | This reverts commit 59e98b27c93d282edb62fad756fd1c1e587c067f. and Revert "ar71xx: merge profiles into image building code" This reverts commit 636089ead6864364798ac988299429d171051c0e. these are still causing issues Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: fix legacy image buildingJo-Philipp Wich2016-06-241-20/+14
| | | | | | | | | | | | | | | | | | After the conversion from legacy device profiles to the newer profile information embedded in the image building code, the legacy recipes got triggered twice with different eval depths, leading to shell syntax errors when processing certain images. The double processing was caused by the remaining Image/Build macro in legacy.mk which serves as main entry point for the new style image build code in conjunction with the newly introduced LegacyDevice/* macros which caused the legacy image build fallback code to kick in. In order to fix the issue, rework all legacy macros to work under the legacy image build wrapper and remove the Image/Build macro of legacy.mk to prevent legacy profiles getting executed in the context of the new build code. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: merge profiles into image building codeJohn Crispin2016-06-2259-2472/+924
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: add suport for ZBT APE522IIRoger Pueyo Centelles2016-06-226-0/+161
| | | | | | | | | The ZBT APE522II is a dual-radio outdoor CPE based on the MT7620a SoC. It has 64 MB RAM, 8 MB flash, 2 Fast Ethernet ports via internal switch (one with 802.3af 48V PoE support), a 802.11b/g/n SoC 2.4 GHz radio and an 802.11a/n/ac MT7612E-based 5 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ipq806x: enable ieee80211 phy hotplug and patch macaddressAdrian Panella2016-06-221-0/+23
| | | | | | | | Calibration data for QCA99x0 in this device has bogus macaddress. The data cannot be modified directly, as it breaks checksum control. Instead change the macaddress from phy add hotplug event. Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* squashfs4: use upstream xz compression header formatHauke Mehrtens2016-06-223-75/+0
| | | | | | | | | | | | | | | | | In the upstream kernel and the upstream squashfs4 tools the xz compression header looks the following: struct disk_comp_opts { __le32 dictionary_size; __le32 flags; }; We added some other members and also moved some existing members. Place the members which are already in upstream header at the same position as in that kernel and add our own at the end. The kernel should not have a problem when there are some additional members and just ignore them. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>