aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet lossGabor Juhos2014-02-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | When the RB91x device uses a GbE link the connection suffers from packet loss: root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q PING 192.168.1.254 (192.168.1.254): 65507 data bytes --- 192.168.1.254 ping statistics --- 20 packets transmitted, 9 packets received, 55% packet loss round-trip min/avg/max = 4.570/4.815/4.999 ms Using a different PLL value fixes the issue. root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q PING 192.168.1.254 (192.168.1.254): 65507 data bytes --- 192.168.1.254 ping statistics --- 100 packets transmitted, 100 packets received, 0% packet loss round-trip min/avg/max = 4.449/5.413/13.870 ms Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39642
* ar71xx: Add support for MikroTik RB951Ui-2HnDGabor Juhos2014-02-202-4/+85
| | | | | | | | | | | | | | | | | | | | | | | | I noticed that the patch at http://patchwork.openwrt.org/patch/4017/ for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been abandoned because it wasn't generated and sent to the mailing list correctly and doesn't apply as a result. I have cleaned up this patch. When testing this on real hardware, I also noticed that wireless didn't work, so this patch fixes that as well. This patch applies cleanly to SVN 39392. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Patchwork: http://patchwork.openwrt.org/patch/4773/ [juhosg: - drop the 'rb951ui_wlan_init' function and rework the code to use the recently introduced rb95x_wlan_init function instead, - fix GPIO number of the port5 LED, - rename LEDs according to the standard LED naming conventions, and use 'rb' prefix in the names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39641
* kernel/3.10: improve fq_codel hashing for 6in4 6to4 801.ad and IPIP casesGabor Juhos2014-02-203-0/+74
| | | | | | | | | | | | | This is a backport of code to improve the quality of fq_codel hashing for 3.10 for some encapsulated protocols. Not needed in 3.11 and later. Patch-by: Dave Taht <dave.taht@bufferbloat.net> Patchwork: http://patchwork.openwrt.org/patch/4902/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39640
* imx6: drop upstream rejected patchLuka Perkov2014-02-202-76/+0
| | | | | | | | http://article.gmane.org/gmane.linux.drivers.i2c/17891 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39639
* ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 boardGabor Juhos2014-02-192-0/+12
| | | | | | | | Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4850/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39637
* ar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 boardGabor Juhos2014-02-195-2/+12
| | | | | | | | | | | Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4849/ [juhosg: - use the Archer C7 specific LED setup instead of adding identical code] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39636
* ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 boardGabor Juhos2014-02-192-4/+50
| | | | | | | | | | | | Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4848/ [juhosg: - rename and refresh kernel patch, - merge the board setup code into mach-archer-c7.c and drop mach-tl-wdr49000-v2.c] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39635
* sunxi: move a lost CONFIG_CHARGER symbol to genericNicolas Thill2014-02-192-1/+1
| | | | SVN-Revision: 39634
* target/sunxi: make REGMAP built-in (used by REGULATOR)Nicolas Thill2014-02-181-0/+1
| | | | SVN-Revision: 39633
* target/uml: update READMENicolas Thill2014-02-181-1/+1
| | | | | | invoking uml is now simplier, not need to setup console & serial SVN-Revision: 39632
* kernel: refresh configs with kconfig.plGabor Juhos2014-02-183-8/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39627
* ar71xx: fix unaligned access hacks for tcp timestampsGabor Juhos2014-02-181-1/+2
| | | | | | | | | | | | This missing bit of the hack saves hugely on instruction traps on tcp connections to ar71xx based routers. Patch-by: Dave Taht <dave.taht@bufferbloat.net> Patchwork: http://patchwork.openwrt.org/patch/4905/ [juhosg: adjust subject, refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39626
* ar71xx: WNR2200: fix mounting root fs problemGabor Juhos2014-02-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Solves ticket #14356 <https://dev.openwrt.org/ticket/14356> Without this patch, UART output will show only 4 partitions: [ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.750000] Creating 4 MTD partitions on "spi0.0": [ 0.750000] 0x000000000000-0x000000050000 : "u-boot" [ 0.760000] 0x000000050000-0x000000070000 : "u-boot-env" [ 0.770000] 0x000000070000-0x0000007f0000 : "firmware" [ 0.790000] 0x0000007f0000-0x000000800000 : "art" and then linux complains :VFS: Cannot open root device "(null)" With this patch, UART out will show 7 partitions: [ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.750000] Creating 4 MTD partitions on "spi0.0": [ 0.750000] 0x000000000000-0x000000040000 : "u-boot" [ 0.760000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.770000] 0x000000050000-0x0000007f0000 : "firmware" [ 0.780000] 2 netgear-fw partitions found on MTD device firmware [ 0.780000] 0x000000050000-0x00000014b440 : "kernel" [ 0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.800000] 0x00000014b440-0x0000007f0000 : "rootfs" [ 0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.820000] mtd: device 4 (rootfs) set to be root filesystem [ 0.830000] 1 squashfs-split partitions found on MTD device rootfs [ 0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data" [ 0.840000] 0x0000007f0000-0x000000800000 : "art" This patch is tested against r39502 of trunk. Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw> Patchwork: http://patchwork.openwrt.org/patch/4870/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39625
* ralink: add support for na930John Crispin2014-02-187-1/+181
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39611
* ralink: add gpio_uartf mux groupJohn Crispin2014-02-181-0/+6
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39610
* ralink: fix the gpio mode mappingJohn Crispin2014-02-181-0/+35
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39609
* 3.13: revert r39601 as the symbol is already thereZoltan Herpai2014-02-171-1/+0
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39602
* 3.13: add missing NF_TABLES symbol - until someone packages itZoltan Herpai2014-02-171-0/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39601
* 3.13: add missing symbolZoltan Herpai2014-02-171-0/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39600
* kirkwood: dockstar: remove sata from packagesLuka Perkov2014-02-161-1/+0
| | | | | | | | The dockstar doesn't have any sata ports. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 39596
* kirkwood: add support for Seagate GoFlexNetLuka Perkov2014-02-162-0/+20
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 39595
* kirkwood: update support for dockstarLuka Perkov2014-02-152-3/+35
| | | | | | | | | | | | | | | | The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0xfe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> Tested-by: Alexander Couzens <lynxis@fe80.eu> CC: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39593
* kirkwood: update support for ib62x0Luka Perkov2014-02-151-11/+15
| | | | | | | | | | | | | | | | The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0xfe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> Tested-by: Luka Perkov <luka@openwrt.org> CC: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39592
* kirkwood: update support for iconnectLuka Perkov2014-02-154-19/+62
| | | | | | | | | | | | | | | | | | Previous patch was pushed due to false user report. While at it fix alphabetic ordering. The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0x1fe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> CC: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39591
* kernel: rtl8306: update reset functionLuka Perkov2014-02-151-7/+2
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 39589
* lantiq: fix typo in pinctl driverLuka Perkov2014-02-151-0/+32
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 39588
* lantiq: fix PCI problems on ARV4510PWLuka Perkov2014-02-151-1/+5
| | | | | | | | | Some ARV4510PW units seem to have unstable PCI due to missing pull-up resistors. This patch makes sure that the GPIO lines are driven properly. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 39587
* use the default package setImre Kaloz2014-02-141-2/+0
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39584
* ar71xx: fix mtdpartsize macro in image Makefile (#14961)Jo-Philipp Wich2014-02-131-1/+1
| | | | | | | | | | | | | The mtdpartsize macro triggers shell errors on various Linux distributions when the partname argument $(1) does not appear within the partmap $(2). Change the sed pattern to only emit anything if a successful substitution occured and only evaluate the arithmetic expression if something was printed by the sed program. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 39583
* upgrade 3.13 targets to 3.13.2, refresh patchesImre Kaloz2014-02-13107-805/+203
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org SVN-Revision: 39582
* upgrade 3.12 to 3.12.10Imre Kaloz2014-02-1312-147/+164
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39581
* change image generation logicImre Kaloz2014-02-131-8/+8
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39580
* handle some CONFIG_TARGET_ROOTFS_INCLUDE_ fooImre Kaloz2014-02-121-1/+12
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39578
* copy initramfs zImage to the bin dir as wellImre Kaloz2014-02-121-1/+4
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39577
* generate ubifs imagesImre Kaloz2014-02-123-1/+18
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39576
* imx6: drop 3.12 supportLuka Perkov2014-02-1220-4074/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39574
* imx6: add initial 3.13 supportLuka Perkov2014-02-1210-0/+3042
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39573
* mvebu: enable NAND controller supportLuka Perkov2014-02-111-0/+4
| | | | | | Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> SVN-Revision: 39569
* mvebu: add support for the Armada XP GP board (DB-MV784MP-GP)Luka Perkov2014-02-112-1/+4
| | | | | | | | | | | | | | | | | | | | This Armada XP GP board from Marvell comes with: * 2GB DDR3 DIMM * 1GB NAND flash (8-bit interface) * 16MB NOR flash (16-bot interrface) * 16MB SPI flash * SDIO module * 3 PCIe * 1 SATA link * 2 USB EHCI * 1 internal SSD * 4 Ethernet Gigabit * 1 RS232 port over USB Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> SVN-Revision: 39568
* mvebu: update kernel configLuka Perkov2014-02-111-5/+12
| | | | | | | | | | | | The config-3.10 doesn't specify the configuration of the backported PCI features, and the Marvell EBU Device Bus Controller, this will prevent a clean compile. This patch enables these features to archive a clean compile without having to specify the state of these configuration after starting to compile. Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> SVN-Revision: 39567
* mvebu: backport mainline patches from kernel 3.13Luka Perkov2014-02-1176-0/+6776
| | | | | | | | | | | | | | | | | This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.12, and Linux v3.13. This work mainly covers: * Finishes work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c) between the PXA family, and the Armada family. * timer initialization update, and access function for the Armada family. * Generic IRQ handling backporting. * Some bug fixes. Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> CC: Luka Perkov <luka@openwrt.org> SVN-Revision: 39566
* mvebu: backport mainline patches from kernel 3.12Luka Perkov2014-02-1174-0/+8337
| | | | | | | | | | | | | | | | | | This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12. This work mainly covers: * Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c) between the PXA family,and the Armada family. * Further updates to the mvebu MBus. * Work and ground work for enabling MSI on the Armada family. * some phy / mdio bus initialization related work. * Device tree binding documentation update. Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> CC: Luka Perkov <luka@openwrt.org> SVN-Revision: 39565
* mvebu: backport mainline patches from kernel 3.11Luka Perkov2014-02-1147-0/+5206
| | | | | | | | | | | | | | | | | | | | | This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.10, and Linux v3.11. This work mainly covers: * Enabling USB storage, and PCI to mvebu_defconfig. * Add support for NOR flash. * Some PCI device tree related updates, and bus parsing. * Adding Armada XP & 370 PCI driver, and update some clock gating specifics. * Introduce Marvell EBU Device Bus driver. * Enaling USB in the armada*.dts. * Enabling, and updating the mvebu-mbus. * Some SATA and Ethernet related fixes. Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> CC: Luka Perkov <luka@openwrt.org> SVN-Revision: 39564
* kernel: fix kmod-usb-net-smsc95xxHauke Mehrtens2014-02-101-15/+0
| | | | | | | | | | smsc95xx.ko depends on crc16.ko on kernel >= 3.8 There was an additional kmod-usb-net-smsc95xx definition in the mxs target code which conflicted with the one in the common area. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39562
* keep initramfs the default for usImre Kaloz2014-02-101-0/+25
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39561
* don't build in usb stuffImre Kaloz2014-02-101-15/+0
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39557
* additional musb fixupsImre Kaloz2014-02-091-17/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39554
* move some omap24xx modules to the generic MakefileImre Kaloz2014-02-091-37/+0
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39543
* kernel: XHCI PCI quirks for kernel 3.12 and 3.13Hauke Mehrtens2014-02-082-21/+16
| | | | | | | | | | This adds empty definitions for the PCI quirks functions when they should not be included in the kernel. This is based on a patch by Daniel <daniel@makrotopia.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39534
* kernel: fix bridge compilation on kernel 3.13Hauke Mehrtens2014-02-081-1/+1
| | | | | | | | | | The int brnf_call_ebtables in the header should be extern, otherwise every object file gets its own int and they will conflict when linking the binary. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39533
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 01:15:45 +0000