aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: convert tl-wr741nd v1/v2 to new image building code, add ↵Felix Fietkau2015-05-111-4/+68
| | | | | | | | infrastructure for building the loader Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45672
* mtd: remove the warning about read-only caused by size vs. block boundary ↵Felix Fietkau2015-05-102-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | mismatch Since the kernel/rootfs split handling was modified 2 years ago by r37283 ( https://dev.openwrt.org/changeset/37283 ) and by the subsequent checkins, users have seen rather scary mtd errors in the log at every boot. The message ends "-- forcing read-only", which looks a bit error-like. That error has been mentioned in some forum threads, when users have noticed this message instead of some actual error. [ 2.940000] 0x000000070000-0x000000ff0000 : "firmware" [ 2.970000] 2 netgear-fw partitions found on MTD device firmware [ 2.970000] 0x000000070000-0x000000188440 : "kernel" [ 2.980000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 2.990000] 0x000000188440-0x000000ff0000 : "rootfs" The patch removes the rather useless warning message. signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 45669
* ar71xx: add platform_pre_upgrade for sysupgradeFelix Fietkau2015-05-101-0/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45667
* kernel: fix regression in backtrace module info change (#19631)Felix Fietkau2015-05-102-26/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45665
* ipq806x: add pcie support to ipq806x based platformsFelix Fietkau2015-05-1012-23/+2662
| | | | | | | | | | | | | | This change adds PCIe support to IPQ806x based platforms. The driver is actually cherry-picked from the following LKML thread: *https://lwn.net/Articles/643086/ (patches 110-111) We also add here an additional fix to support multiple PCI controllers on the same platform (patch 112), and to patch the ap148 & dbs149 DTS files (patch 113). Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45663
* ipq806x: add support for zImage kernelFelix Fietkau2015-05-103-3/+5
| | | | | | | | | | | | | | | This change enable zImage+appended dtb support in ipq806x kernel options. The zImage will now be generated as part of the kernel binaries. Platforms which do not have DT support enabled in U-boot can now make use of it by generating zImage files and appending dtb to it. It is not used yet but it is done as a stepping stone for early IPQ806x platforms, which did not include DT support in U-boot. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45662
* ipq806x: fix boot freeze on zImage kernelFelix Fietkau2015-05-102-0/+144
| | | | | | | | | | | | | | | | | | | | | | | ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended on most ARM architectures. This automatically calculate ZRELADDR by masking PHYS_OFFSET with 0xf8000000. On IPQ806x though, the first ~20MB of RAM is reserved for the hardware. In newer bootloader, when DT is used, this is not a problem, we just reserve this memory in the device tree. But if the bootloader doesn't have DT support, then ATAGS have to be used. In this case, the ARM decompressor will position the kernel in this low mem, which will not be in the RAM section mapped by the bootloader, which means the kernel will freeze in the middle of the boot process trying to map the memory. As a work around, this patch allows disabling AUTO_ZRELADDR when ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders which don't support device-tree, which is the case on certain early IPQ806x based designs. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45661
* generic: add CRYPTO_DEV_QCE option to default configFelix Fietkau2015-05-102-0/+2
| | | | | | | | | | This option has been added in kernel 3.17. It shows-up only when both ARCH_QCOM and CRYPTO are enabled. So we'll disable these two by default to avoid stalling the build when these conditions are met. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45658
* ar71xx: add status led found on ew-dorin boardsLuka Perkov2015-05-102-1/+10
| | | | | | Signed-off-by: Catrinel Catrinescu <cc@80211.de> SVN-Revision: 45656
* kernel: when KALLSYMS is disabled, print module address + size for matching ↵Felix Fietkau2015-05-102-0/+76
| | | | | | | | backtrace entries Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45655
* kernel: fix pppoe disconnect issuesFelix Fietkau2015-05-093-0/+143
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45653
* kernel: backport first bcma patches from 4.2Rafał Miłecki2015-05-094-34/+74
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45652
* kernel: add accidentally left out fib trie backport patchFelix Fietkau2015-05-081-0/+52
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45650
* generic: refresh patchesLuka Perkov2015-05-081-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45648
* kirkwood: add support for the Seagate GoflexHomeLuka Perkov2015-05-087-0/+167
| | | | | | | | Add Support for the Seagate GoflexHome <http://wiki.openwrt.org/toh/seagate/goflexhome> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 45647
* ar71xx: allow mktplinkfw calls from the new image code to fail (because of ↵Felix Fietkau2015-05-081-3/+2
| | | | | | | | oversized images) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45646
* ar71xx: allow tp-link initramfs images to exceed size limitsFelix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45645
* ar71xx/image: move TPLINK-LZMA image to new build codeFelix Fietkau2015-05-081-66/+361
| | | | | | | | | | | There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties. v2: set correct DEVICE_PROFILES for all images. v2: migrate TP-LINK TL-WR710N v2 which was committed after v1. v2: split very very long line `TARGET_DEVICES +=` into smaller parts Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 45643
* ar71xx: do general formatting on wnr2000-v4Felix Fietkau2015-05-081-43/+52
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45640
* ar71xx: fix spelling, add copyright on wnr2000-v4Felix Fietkau2015-05-081-2/+3
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45639
* ar71xx: add support for Green WAN LED on wnr2000-v4Felix Fietkau2015-05-081-0/+4
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45638
* ar71xx: add support for green LAN LEDS for wnr2000-v4Felix Fietkau2015-05-081-8/+40
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45637
* ar71xx: fix amber WAN LED setting for wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45636
* ar71xx: make WLAN button RFKILL on wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | | | | Users will now be provided with the inherent wifi toggle functionality of /etc/rc.button/rfkill Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45635
* ar71xx: set all buttons to be active_low on wnr2000-v4Felix Fietkau2015-05-081-0/+3
| | | | | | | | | Originally pressing a button would trigger a release state and vice-versa, as observed from hotplug.d. Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45634
* ar71xx: fix ethernet on wnr2000-v4Felix Fietkau2015-05-081-22/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Most people report broken ethernet with upstream. Last year, user "franz.flasch" authored a working mach-file. His patch is outdated so I modernized it. Original patch and user commentary on page 1: https://forum.openwrt.org/viewtopic.php?pid=260861#p260861 I have figured out what the critical differences are between the two that caused upstream ethernet to break. 1) Both ath79_init_mac() functions calls must be invocated before any GMAC init 2) must init GMAC0 before GMAC1 That was enough to get upstream to function, but I wanted to enjoy my confidence having tested franz's patch for a week sucessfully, so I put his whole function in, which only features more differences in order of function calls. An expert should consider these changes, which could pose potential bugs/issues: 1) No longer using the flag AR934X_ETH_CFG_SW_PHY_SWAP in the ath79_setup_ar934x_eth_cfg() call. 2) Possible consequence of no longer explicitly setting ethernet duplex/speed. Review: With this patch, my ethernet and wireless works. Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45633
* ar71xx: track the correct WAN interface on wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45632
* ar71xx: fix LAN portmasks on wnr2000-v4Felix Fietkau2015-05-081-4/+4
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45631
* ar71xx: use a common naming scheme for LEDS on wnr2000-v4Felix Fietkau2015-05-082-16/+16
| | | | | | | | | It is common that the router provider be used rather than product name. One can see this in target/linux/ar71xx/base-files/etc/uci-defaults/01_leds Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45630
* mvebu: add xhci phy supportImre Kaloz2015-05-082-0/+94
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 45629
* ar71xx: make art partition read only on 16MB ew-dorin boardLuka Perkov2015-05-081-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45627
* ar71xx: fix 82_patch_ath10kFelix Fietkau2015-05-081-2/+2
| | | | | | | | It has been broken since the new ath10k firmware introduced in r44656. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 45624
* kernel: backport upstream usbnet fix (fixes #19455)Felix Fietkau2015-05-061-0/+107
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45621
* brcm47xx: fix regression in NVRAM support for WGT634URafał Miłecki2015-05-062-4/+4
| | | | | | | | | | We were calculating wrong offset, NVRAM wasn't found and OpenWrt didn't boot. Fixes: 9019803 ("brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)") Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45618
* generic/4.0: update to 4.0.1Imre Kaloz2015-05-031-6/+6
| | | | | | | | | Also refresh one patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 45601
* mpc85xx: replace WDR4900 uci-defaults ethernet MAC address hack with DTS entryImre Kaloz2015-05-032-3/+2
| | | | | | | | | This also changes the MAC address to one of the adresses actually used by the stock firmware on one of the ethernet interfaces. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 45599
* mpc85xx: gianfar: add mtd-mac-address supportImre Kaloz2015-05-031-0/+19
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 45598
* mpc85xx: move newly created files from patch files to files directoryImre Kaloz2015-05-035-585/+525
| | | | | | | | This will make these files much more maintainable. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 45597
* The ability to read MAC addresses from MTD is useful for other targets ↵Imre Kaloz2015-05-032-4/+2
| | | | | | | | besides ramips and lantiq as well. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 45596
* ar71xx: fix leds and gpio on wpj344Luka Perkov2015-04-291-15/+13
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45589
* ar71xx: fix sysupgrade for compex-wpj344Luka Perkov2015-04-291-1/+1
| | | | | | | | Moved board to the right magic case. Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 45588
* kernel: disable INET_LRO by defaultJonas Gorski2015-04-286-6/+0
| | | | | | | | | | | | INET_LRO deprecated and there are exactly two drivers using it, neither being included in any of the targets enabling INET_LRO. At the same time both drivers needing it select it. So just disable it for everyone. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45584
* brcm63xx: fix bcm6348 ext irqc compatible nameJonas Gorski2015-04-271-1/+1
| | | | | | | | | This was a remnant of an old version. Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45583
* brcm63xx: fix bcm3368.dtsi typo.Jonas Gorski2015-04-271-2/+2
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45582
* kernel: implement RENAME_EXCHANGE support for jffs2 - overlayfs requires itFelix Fietkau2015-04-252-0/+116
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45580
* bcm53xx: sort ports from NVRAM entries before matching themRafał Miłecki2015-04-241-5/+7
| | | | | | | | Some devices have unsorted ports which may lead to broken config. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45575
* netlogic: copy initramfs image to $(BIN_DIR)Florian Fainelli2015-04-231-0/+4
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 45574
* kernel: backport rest of bgmac patches to 4.0Rafał Miłecki2015-04-2311-0/+824
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45573
* kernel: backport few bgmac patches to 4.0Rafał Miłecki2015-04-235-39/+605
| | | | | | | | | I still need to test following patch before backporting: bgmac: leave interrupts disabled as long as there is work to do Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45571
* brcm47xx: add patches for kernel 4.0Rafał Miłecki2015-04-2332-0/+3562
| | | | SVN-Revision: 45570
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 02:26:59 +0000