aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* generic: nuke 2.6.33 specific stuff, is not used by any platformGabor Juhos2010-12-17173-53906/+0
| | | | SVN-Revision: 24644
* ar71xx: UBNT Secondary MAC address duplicate fixGabor Juhos2010-12-171-2/+13
| | | | | | | | | | | | | There is Secondary MAC address duplicate problem with some UBNT RouterStation and RouterStation Pro HW batches as Primary MAC addresses are not increased by 2 per device in board data. Fix is to use 'Locally Administrated bit' for Secondary MAC address instead of increasing Primary MAC addresses by 1 which could overlap with other device Primary MAC address. Signed-off-by: Kestutis Barkauskas<keba@devint.net> SVN-Revision: 24643
* ar71xx: populate LED configuration for WZR-HP-G300NHGabor Juhos2010-12-171-0/+30
| | | | | | | | Signed-off-by: Dave Lichterman <laviddichterman@gmail.com> [nand-disk trigger has been removed - juhosg] SVN-Revision: 24642
* brcm47xx: add ssb debug option.Hauke Mehrtens2010-12-163-0/+3
| | | | | | | | | This fixes a problem with wrt350n. It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS" Thank you sn9 for fixing this problem. SVN-Revision: 24626
* brcm47xx: add some missing pci ID for tg3 driverHauke Mehrtens2010-12-162-0/+94
| | | | | | | | | Broadcom removed these pci id, but at least the wrt350n has a Ethernet controller with a pci id of 14e4:1676 Thank you sn9 for fixing this problem. SVN-Revision: 24625
* brcm47xx: this patch went upstreamHauke Mehrtens2010-12-161-50/+0
| | | | SVN-Revision: 24624
* ar71xx: add wlan led for the TL-WR941NDGabor Juhos2010-12-152-0/+27
| | | | SVN-Revision: 24612
* ar71xx: UBNT M-Series MAC address fixGabor Juhos2010-12-151-3/+4
| | | | | | | | | UBNT M-Series devices have 2 MAC addresses in board data. Fix is to use both entries from board data instead of one entry. Signed-off-by: Kestutis Barkauskas<keba@devint.net> SVN-Revision: 24611
* revert r24604Imre Kaloz2010-12-152-221/+223
| | | | SVN-Revision: 24605
* target/linux: clean up non generic & obsolete kernel options for 2.6.36, 2.6.37Alexandros C. Couloumbis2010-12-152-223/+221
| | | | SVN-Revision: 24604
* ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boardsGabor Juhos2010-12-141-3/+16
| | | | SVN-Revision: 24569
* ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boardsGabor Juhos2010-12-142-0/+15
| | | | SVN-Revision: 24568
* * make the usb gpio configurable * 105-header_xway.patch has a corrupt line ↵John Crispin2010-12-142-37/+20
| | | | | | count in it SVN-Revision: 24564
* ramips: remove 2.6.3[24] supportGabor Juhos2010-12-1416-1174/+0
| | | | SVN-Revision: 24562
* ramips: switch to 2.6.36Gabor Juhos2010-12-141-2/+2
| | | | SVN-Revision: 24561
* ramips: handle OTG interrupt on the RT305x SoCGabor Juhos2010-12-141-0/+3
| | | | SVN-Revision: 24560
* bump kernel version, add MAINTAINER entryImre Kaloz2010-12-141-1/+2
| | | | SVN-Revision: 24559
* add plemininary ultrasparc supportImre Kaloz2010-12-143-0/+231
| | | | SVN-Revision: 24558
* Update package selectionHamish Guthrie2010-12-131-3/+5
| | | | SVN-Revision: 24544
* enable mach support for OpenRD Base and OpenRD Client (#8417), spare the restJo-Philipp Wich2010-12-131-2/+2
| | | | SVN-Revision: 24541
* base-files: use shutdown instead of stop when the system goes down (patch by ↵Felix Fietkau2010-12-139-9/+9
| | | | | | tripolar) SVN-Revision: 24540
* adds new lantiq kernel. once the codebase is fully tested and know to be ↵John Crispin2010-12-1232-0/+31530
| | | | | | working on all the devices previously supported by ifxmips, we will drop ifxmips support. SVN-Revision: 24526
* kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update ↵Hauke Mehrtens2010-12-1131-33/+33
| | | | | | kenrel 2.6.36.1 to 2.6.36.2 SVN-Revision: 24486
* ar71xx: add missing files for the JA76PF boardGabor Juhos2010-12-102-0/+122
| | | | SVN-Revision: 24444
* Fixed Comtrend CT536_CT5621 board settings. These boards are based on the ↵Daniel Dickinson2010-12-104-1/+82
| | | | | | 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. SVN-Revision: 24442
* ar71xx: add support for the jjPlus JA79PFGabor Juhos2010-12-1011-2/+38
| | | | | | Patch-by: Cezary Jackiewicz SVN-Revision: 24440
* ar71xx: add support for the TP-LINK TL-MR3220 v1 boardGabor Juhos2010-12-1013-44/+91
| | | | SVN-Revision: 24439
* ar71xx: add default network configuration file for the TL-MR3420Gabor Juhos2010-12-101-0/+24
| | | | SVN-Revision: 24437
* ar71xx: do not throw compile errors if the nbg460n uboot is not selectedFelix Fietkau2010-12-101-2/+4
| | | | SVN-Revision: 24426
* ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as wellGabor Juhos2010-12-102-2/+5
| | | | SVN-Revision: 24421
* ar71xx: add nbg460n image generationGabor Juhos2010-12-107-2/+84
| | | | | | | | This adds image generation for NBG460N/550N/550NH boards. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> SVN-Revision: 24419
* linux/generic: update & refresh 2.6.36 & 2.6.37. (closes #8324)Alexandros C. Couloumbis2010-12-0811-80/+55
| | | | SVN-Revision: 24370
* add optimization to Freescale targetsImre Kaloz2010-12-082-0/+2
| | | | SVN-Revision: 24341
* ramips: ramips_esw: add more definitionsGabor Juhos2010-12-081-3/+49
| | | | SVN-Revision: 24340
* ramips: ramips_esw: add helper function to set pvidGabor Juhos2010-12-081-1/+17
| | | | SVN-Revision: 24339
* ramips: ramips_esw: add helper function to set vlan membersGabor Juhos2010-12-081-1/+31
| | | | SVN-Revision: 24338
* ramips: ramips_esw: add helper function to set VLAN idGabor Juhos2010-12-081-2/+17
| | | | SVN-Revision: 24337
* ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} functionGabor Juhos2010-12-081-0/+23
| | | | SVN-Revision: 24336
* ramips: ramips_esw: use rt305x_esw prefix in function namesGabor Juhos2010-12-081-33/+33
| | | | SVN-Revision: 24335
* ramips: ramips_esw: coding style cleanupGabor Juhos2010-12-081-24/+31
| | | | SVN-Revision: 24334
* ramips: ramips_esw: add defines for switch register offsetsGabor Juhos2010-12-081-24/+52
| | | | SVN-Revision: 24333
* ramips: ramips_esw: don't touch GPIO_PURPOSE registerGabor Juhos2010-12-081-20/+0
| | | | | | It must have been set by the board initialization code. SVN-Revision: 24332
* ramips: ramips_esw: convert it to be a platform driverGabor Juhos2010-12-085-13/+134
| | | | SVN-Revision: 24331
* ramips: ramips_esw: move hardware initialization into a separate functionGabor Juhos2010-12-081-8/+14
| | | | SVN-Revision: 24330
* ramips: ramips_esw: use a private structure for the functionsGabor Juhos2010-12-081-36/+43
| | | | SVN-Revision: 24329
* ethernet driver fixup for ppc4xxImre Kaloz2010-12-081-0/+26
| | | | SVN-Revision: 24328
* Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going ↵Daniel Dickinson2010-12-081-2/+2
| | | | | | away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. SVN-Revision: 24316
* Profiles: Make buttons and led modules included by default so that failsafe ↵Daniel Dickinson2010-12-082-4/+3
| | | | | | will work in the case of builds for releases. SVN-Revision: 24315
* Profiles: Move wpad-mini to the profiles that use it, rather than default ↵Daniel Dickinson2010-12-085-5/+5
| | | | | | for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile SVN-Revision: 24314
* flash_chips: Added Macronix MX29LV640T Flash Chip support previously ↵Daniel Dickinson2010-12-073-0/+90
| | | | | | mistakenly added to brcm63xx. Thanks blunoise. SVN-Revision: 24313
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 07:55:00 +0000