aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add kernel support for EnGenius EPG5000.John Crispin2015-06-183-0/+218
| | | | | | | | Signed-off-by: Christian Beier <cb@shoutrlabs.com> Backport of r46047 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46057 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TL-WR720N-v4.John Crispin2015-06-184-6/+13
| | | | | | | | | | | | The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch were tested by "Wong min <alpha080@gmail.com>". Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Backport of r46046 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46056 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for compex wpj531John Crispin2015-06-189-6/+179
| | | | | | | | | | | | | tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize erase 0x9f680000 +1 cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Christian Mehlis <christian@m3hlis.de> Backport of r46045 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add Support for the Bitmain Antminer S1John Crispin2015-06-189-1/+176
| | | | | | | | | | | | | This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: James Hilliard <james.hilliard1@gmail.com> Backport of r46044 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46054 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add Support for the Linksys RE6500John Crispin2015-06-188-1/+148
| | | | | | | | | | | | This patch adds support for the Linksys RE6500 Range Extender http://wiki.openwrt.org/toh/linksys/re6500 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Backport of r46043 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46053 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for the D-Link DCS-930 B1John Crispin2015-06-188-0/+130
| | | | | | | | | | http://wiki.openwrt.org/toh/d-link/dcs-930l Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Backport of r46042 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46052 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for PandoraBox PBR-M1John Crispin2015-06-188-1/+191
| | | | | | | | | | | This patch is for PandoraBox PBR-M1 which is based on mt7621, all the features work fine, including rtc, leds, button, usb3.0, etc. Signed-off-by: tymon <banglang.huang@foxmail.com> Backport of r46041 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46051 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix a bug in the cevt code on mt7620John Crispin2015-06-181-0/+14
| | | | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> Backport of r46038 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46039 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix hw id of tl-wr710n image (#19902)Felix Fietkau2015-06-181-1/+1
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46032 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46033 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: x86/64: enable VirtIO block and console supportJo-Philipp Wich2015-06-171-2/+2
| | | | | | | | | | This is required to use x86/64 in KVM containers with VirtIO disks Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> Backport of r46017 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46018 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb493g: fix gpio-mdio accesses under loadJonas Gorski2015-06-171-0/+61
| | | | | | | | | | | | | | | | | | | It seems that there are maximum timings for mdio accesses that can be hit when the system is under load and the thread is scheduled during a read or write access. Since there is no way of knowing if this happens as there is not even a parity bit, try to work around it by disabling interrupts during any gpio-mdio accesses. Performance impact seems to be neglectable, as mdio accesses are not that often. Hopefully fixes #19500. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Backport of r46012. git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46016 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.18 to 3.18.16Jonas Gorski2015-06-1744-334/+125
| | | | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16 Signed-off-by: Jonas Gorski <jogo@openwrt.org> Backport of r46011. git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46015 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config symbolFelix Fietkau2015-06-171-0/+1
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46007 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46009 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: use USB patches sent upstream by HaukeRafał Miłecki2015-06-168-162/+383
| | | | | | | | | | | | | | | | | This stabilizes USB support. The old patch was handling initialization in a different order that was causing some problems with few USB 3.0 devices. Some weren't detected, some were working unstable, sometimes USB 3.0 could hang the whole controller. A still known issue (but not a regression) is controller hang triggered by connecting USB 1.1 device when not having OHCI controller enabled (kmod-usb-ohci). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Backport of r45997 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@45998 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config symbol (#19870)Felix Fietkau2015-06-151-0/+1
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r45992 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@45993 3c298f89-4303-0410-b956-a3cf2f4a3e73
* remove broken targetsFelix Fietkau2015-06-1487-20317/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@45977 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove linux 4.0Felix Fietkau2015-06-14317-48198/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@45975 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: return limit as number of processed frames when re-scheduling NAPI pollFelix Fietkau2015-06-141-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45971 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: Fix problem with AR8337 MAC swap handlingFelix Fietkau2015-06-146-4/+10
| | | | | | | | | | | | | | | | | | | | | AR8337 supports a configuration bit to swap MAC0 and MAC6. Currently this is set in general if an AR8337 is detected and causes issues with devices using an AR8334 (internally an AR8337, just less chip pins). And it might even cause issues with AR8337-based devices with different board designs. Swapping the MAC's however isn't needed for AR8337 in general. It's just needed in case of certain board designs (affected devices seem to be based on Atheros reference board AP135/136-010). Therefore this configuration bit should be moved to platform data. The patch includes the needed changes to the device initialization code of affected devices. Hopefully I didn't miss any .. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45970 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add pll_1000 value for eth0 to Ubiquiti Rocket M XWFelix Fietkau2015-06-141-1/+2
| | | | | | | | | | This patch adds the pll_1000 value for eth0 interface. This makes the Rocket M XW image compatible with other Ubiquiti devices with similar hardware with a Gigabit Ethernet port. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45965 3c298f89-4303-0410-b956-a3cf2f4a3e73
* oxnas: change file extension of u-boot+initramfs imageFelix Fietkau2015-06-141-1/+1
| | | | | | | | | | The *u-boot-initramfs* images are not ITB/FIT images but are rather supposed to be loaded to RAM and jumped-into. To avoid confusion, change the file extension from itb to bin. Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45963 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix mac offset in firmware fileFelix Fietkau2015-06-141-1/+1
| | | | | | | | | In new firmware-4.bin (for ath10k) mac offset is 0x114 (276), not 0x118 (280). This also closes #19751, bug introduced in #45624 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45958 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix 100/10mbps ethernet link issues on mynet range extenderFelix Fietkau2015-06-142-4/+69
| | | | | | | | | | | | | | | | | | The mynet range extender hardware is suffering from ethernet link loss when booting with a recent openwrt image. This only happens on 100mbps links, with 1Gbps speed the link was fine. The cause of the problem is that the AR8035 PHY (aka F1E) requires turning on and off the special TX delay setting depending on the speed of the link. The 10mbps mode only needed the proper pll value, which was extracted from the vendor code. Reported-by: Pascal Paradis Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45954 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: fix A4001N image padding sizeJonas Gorski2015-06-111-1/+1
| | | | | | | | | | | | When r42245 moved A4001N to DT based detection the image padding size was accidentally increased from 4 to 8 MiB. This made images unflashable on these devices. Fixes #19836. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45945 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: update NVRAM driver to MIPS version from upstream-sfrRafał Miłecki2015-06-101-21/+16
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45943 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: backport BCM47XX patches (NVRAM & BCMA_HOST_PCI)Rafał Miłecki2015-06-1010-12/+354
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45942 3c298f89-4303-0410-b956-a3cf2f4a3e73
* b53: fix memory out of bounds access on 64 bit targetsJonas Gorski2015-06-101-2/+2
| | | | | | | | | | | | | On device reset the sizes for the vlan and port tables were wrongly calculated based on the pointer size instead of the struct size. This causes buffer overruns on 64 bit targets, resulting in panics. Fix this by dereferencing the pointers. Reported-by: Fedor Konstantinov <blmink@mink.su> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45938 3c298f89-4303-0410-b956-a3cf2f4a3e73
* b53: widen stp state mask to 3 bits (instead of 2)Jonas Gorski2015-06-101-1/+1
| | | | | | | | | | | | | | | At least on my b53 chip, the mask is 3 bits wide, and because of this some STP states are not set properly and discarded when read. Maybe for some other chips it makes sense to have just 2 bits width, but I don't have other versions around to test/validate. If that's the case then maybe we could add another STP state mask. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45937 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix Power LED handling for WHR-300HP2, WHR-600D, WHR-1166DFelix Fietkau2015-06-081-3/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45930 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport config-related bcma patches from 4.2Rafał Miłecki2015-06-082-0/+98
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45927 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: backport the latest 4.2 ARM BCM5302X patchesRafał Miłecki2015-06-0711-75/+391
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45922 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: refresh kernel configRafał Miłecki2015-06-071-3/+1
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45921 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: move a symbol from the ipq806x config to generic to prevent it from ↵Felix Fietkau2015-06-073-1/+2
| | | | | | | | being nuked by make kernel_oldconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45920 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove NAND flash related kmod-* packagesFelix Fietkau2015-06-071-18/+0
| | | | | | | | | | | They are useless, as the platform already selects the right options for NAND support. The main reason for removing them is the fact that it makes kernel configs more annoying to maintain on platforms that provide NAND drivers but disable them (e.g. ramips) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45919 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add missing symbolJohn Crispin2015-06-071-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45918 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: refresh kernel configRafał Miłecki2015-06-061-0/+1
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45916 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: fallback to default_do_upgrade if NAND upgrade failsRafał Miłecki2015-06-061-0/+12
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45915 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sysupgrade: drop useless shift in platform.shRafał Miłecki2015-06-061-1/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45914 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: sysupgrade: drop useless shift in platform.shRafał Miłecki2015-06-061-1/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45913 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: extract TRX from image on the flyRafał Miłecki2015-06-061-13/+14
| | | | | | | | | Extracting TRX to separated file in /tmp/ just wastes some RAM while we can just pass a proper extracting command to the default_do_upgrade. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45912 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sysupgrade: extract TRX partitions directly from vendor imageRafał Miłecki2015-06-061-3/+5
| | | | | | | | | Extracting full TRX out of vendor format is not needed as otrx supports passing TRX offset. This saves some RAM during sysupgrade. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45911 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: update NVRAM driver to support getting contentsRafał Miłecki2015-06-052-15/+60
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45907 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: backport MIPS BCM47XX changes queued for 4.2Rafał Miłecki2015-06-0524-23/+1407
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45906 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix AR71XX_MODEL for TP-Link TL-WA830RE v1John Crispin2015-06-051-0/+4
| | | | | | | | | The v1 identifies as v10 internally. As there is no TL-WA830RE v10, add a workaround to avoid confusing users. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45903 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for RT5350F-OLinuXino V2John Crispin2015-06-057-0/+237
| | | | | | | | | | | Version 2 : White spaces and alphabetical order problems fixed Support for Olimex RT5350F-OLinuXino Boards, tested with RT5350F-OLinuXino and RT5350F-OLinuXino-EVB boards. More Info : https://www.olimex.com/Products/OLinuXino/RT5350F/RT5350F-OLinuXino/open-source-hardware Signed-off-by: Dimitar Gamishev HeHoPMaJIeH <gamishev@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45902 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: extract TRX from image on the flyJohn Crispin2015-06-051-7/+8
| | | | | | | | | | Extracting TRX to separated file in /tmp/ requires extra RAM which may not be available on some chepaer devices. Instead of that lets pass a proper extracting command to the default_do_upgrade. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45901 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: Backport gpio-stp-xway to fix the highest bits of the PHY LEDsJohn Crispin2015-06-051-0/+25
| | | | | | This fixes the LAN2 LED on Arcadyan VGV7510KW22. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45899 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431)John Crispin2015-06-058-0/+388
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45897 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: improve tx clean up and add fe_tx_ring structFelix Fietkau2015-06-053-70/+83
| | | | | | | | | | if there is any new tx need to clean up. do it in next napi poll. collect tx related members to fe_tx_ring struct. for better cache usage and more readable. Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45895 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: change ethernet napi interrupt sequenceFelix Fietkau2015-06-051-5/+4
| | | | | | | | | | when open device. first ready napi software rx. then enable hardware interrupt. final start software tx queue to send data. Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45894 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 06:35:15 +0000