aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/x86
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.136John Audia2022-08-141-1/+1
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 2239ead6eb63933d80e0c26dd95ba684fdd74006)
* x86: add missing Lex 3I380NX network detectionPaul Spooren2022-08-061-0/+52
| | | | | | | | | | | | | | | | | | | | The Lex 3I380NX industrial PC has 4 ethernet controllers on board which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks as CLK_CRITICAL and they will not get turned off. This commit is nearly redundant to 3d0818f5eba8 ("platform/x86: pmc_atom: Add Lex 3I380D industrial PC to critclk_systems DMI table") but for the 3I380NX device. The original vendor firmware is only available using the WaybackMachine: http://www.lex.com.tw/products/3I380NX.html Signed-off-by: Michael Schöne <michael.schoene@rhebo.com> Signed-off-by: Paul Spooren <paul.spooren@rhebo.com> (Hans broader version for more Lex Baytrail systems) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 8019410f566377d958e2bd23673d168742ab2f44)
* x86: update defconfig for 5.10.133John Audia2022-07-301-1/+7
| | | | | | | | | Add some new/missing symbols relating to speculative execution mitigations[1]. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v5.10.133&id2=v5.10.132 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 56760c0b1316a0e379ff141b895c2929f0dace8d)
* x86: 64: Add kmod-igc to default packagesHauke Mehrtens2022-06-291-1/+1
| | | | | | | | | This adds the igc driver for the Intel 2.5GBit Ethernet chip to the default packages. Fixes: #10064 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit aae3a8a254275f8be5c45d766ac7b5afb82a9fe6)
* x86: fix damaged config 5.10 refreshChristian Lamparter2022-06-272-3/+3
| | | | | | | | | | | | | Restore CONFIG_I8K + CONFIG_INTEL_INT0002_VGPIO that got removed when I refreshed the config. Each x86 target gets its own CONFIG_CRYPTO_BLAKE2S + LIB settings as only the x86_64 can use the accelerated x86 version. Also remove two extra spaces that sneaked into geode's config. Fixes: 539e60539a2f ("generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 9fc2d58bf8b37f80e8027dc55b6007e0bfa66ebe)
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-275-2/+10
| | | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 539e60539a2fde6531bd179c94bb9c7f8f490f2b)
* x86: Add support for Sophos XG 85 and XG 86 devicesRaylynn Knight2022-03-272-2/+3
| | | | | | | | | | | | | This commit builds on previous efforts to add support for Sophos devices. * Add support for Sophos XG 85 with/without wireless * Add support for Sophos XG 86 with/without wireless Tested on Sophos XG 85w rev1 and XG 86 rev 1 Signed-off-by: Raylynn Knight <rayknight@me.com> (cherry picked from commit c7bcbcd49280a79b287cc072cd0ca7de777a7ac4)
* x86: legacy: enable pata_sis driverMatthias Schiffer2022-03-101-0/+1
| | | | | | | | This driver is needed to boot from CompactFlash on the Siemens Futro S400. The device has an AMD NX1500 CPU, which seems to be unsupported by the geode subtarget, so it must use legacy. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: 5.10: allocate last level PTEs in high memoryRui Salvaterra2022-03-011-1/+1
| | | | | | | | | | Enable support for allocating user space page table entries in high memory [1], for the targets which support this feature. This saves precious low memory (permanently mapped, the only type of memory directly accessible by the kernel). [1] https://www.kernel.org/doc/html/latest/vm/highmem.html Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* x86: geode: fix package nameing kmod-crypto-ebc does not existFlorian Eckert2022-02-261-1/+1
| | | | | | | This commit fixes the package naming that was added by commit: e1e4cbde5ceb228e60fff1fc752cb90d9a7df2ab Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* x86: grub2: search for the "kernel" filesystem on all disksJax Jiang2022-02-242-11/+1
| | | | | | | | | | | | | | | | | | | Previously, grub2 was hardcoded to always look on "hd0" for the kernel. This works well when the system only had a single disk. But if there was a second disk/stick present, it may have look on the wrong drive because of enumeration races. This patch utilizes grub2 search function to look for a filesystem with the label "kernel". This works thanks to existing setup in scripts/gen_image_generic.sh. Which sets the "kernel" label on both the fat and ext4 filesystem variants. Signed-off-by: Jax Jiang <jax.jiang.007@gmail.com> Suggested-by: Alberto Bursi <bobafetthotmail@gmail.com> (MX100 WA) (word wrapped, slightly rewritten commit message, removed MX100 WA) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: fix support for Sophos SG/XG wireless productsRaylynn Knight2022-02-191-8/+8
| | | | | | | | | | Correct typo that caused network interfaces for Sophos SG/XG wireless devices to not be configured properly. Tested on Sophos SG 135wr2, Sophos XG 125wr2 and Sophos SG 105wr1 Signed-off-by: Raylynn Knight <rayknight@me.com>
* x86: geode: add kmod-crypto-ebc needed for hw accelerationPaul Fertser2022-02-191-1/+2
| | | | | | | | | | Module kmod-crypto-hw-geode provides accelerated cbc(aes) and ecb(aes) but the software implementation is also needed when AES key size isn't 128 so that the operation can fall back. Add the kmod so that it would all work as expected out of the box. Tested-by: timur_davletshin Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* x86: improve sysinfo handling of dummy valuesStefan Lippers-Hollmann2022-01-081-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Fall back to using board_vendor and board_name, if known dummy values are used for sys_vendor and product_name. Examples: To be filled by O.E.M.:To be filled by O.E.M. --> INTEL Corporation:ChiefRiver System manufacturer:System Product Name --> ASUSTeK COMPUTER INC.:P8H77-M PRO To Be Filled By O.E.M.:To Be Filled By O.E.M. --> ASRock:Q1900DC-ITX Gigabyte Technology Co., Ltd.:To be filled by O.E.M. --> Gigabyte Technology Co., Ltd.:H77M-D3H empty:empty --> TYAN Computer Corporation:TYAN Toledo i3210W/i3200R S5211 To Be Filled By O.E.M.:To Be Filled By O.E.M. --> ASRock:H77 Pro4-M Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* x86: add/improve support for Sophos SG/XG productsRaylynn Knight2021-12-292-2/+12
| | | | | | | | * Add support for Sophos SG/XG-115 r1, r2 with/without wireless * Add support for Sophos SG/XG-125 r1, r2 with/without wireless * Add wireless support for SG/XG-105 Signed-off-by: Raylynn Knight <rayknight@me.com>
* kernel: 5.10: consolidate mac80211 crypto optionsSergey Ryazanov2021-12-173-13/+0
| | | | | | | | | | | | | | | | | | | | | | Each of - CRYPTO_AEAD2 - CRYPTO_AEAD - CRYPTO_GF128MUL - CRYPTO_GHASH - CRYPTO_HASH2 - CRYPTO_HASH - CRYPTO_MANAGER2 - CRYPTO_MANAGER - CRYPTO_NULL2 either directly required for mac80211 crypto support, or directly selected by such options. Support for the mac80211 crypto was enabled in the generic config since c7182123b9 ("kernel: make cryptoapi support needed by mac80211 built-in"). So move the above options from the target configs to the generic config to make it clear why do we need them. CC: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: filter out both Clang and LLD versionsSergey Ryazanov2021-12-171-1/+0
| | | | | | | | Both CLANG_VERSION and LLD_VERISON are autogenerated runtime configuration options, so add them to the kernel configuration filter and remove from generic and per-target configs to keep configs clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* x86: remove old lzma tuning patchChristian Lamparter2021-12-111-22/+0
| | | | | | | | | | | | | | | | | | | | | Chen Minqiang reported in his GitHub PR #4733 that: With CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA=y option set, the popular x86/amd64 target's initramfs-kernel failed to boot. The cause for this boot failure is that the LZMA compression uses a the first bytes to encode the compression parameters. It does not have a fixed magic. Yes, this only works if the the existing lzma options in the upstream are not changed. This patch does away with OpenWrt special LZMA options tuning since it is rather unlikely that upstream will improve the compression algorithm detection after all this time. Even though, the tuning produced a smaller initramfs (~1.1% in a spot check). Link: <https://github.com/openwrt/openwrt/pull/4733> Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: add/improve support for Sophos SG/XG productsStan Grishin2021-12-112-4/+13
| | | | | | | | | * Better product ID for Sophos SG/XG-105 models * Add support for Sophos SG/XG-135 r1, r2 with/without wireless Signed-off-by: Stan Grishin <stangri@melmac.ca> [Changed subject to x86 - probably eaten somewhere, the PR had it] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: added support to generate VHDX imagesOldřich Jedlička2021-12-052-1/+7
| | | | | | | Added support to generate dynamic-sized VHDX images for Hyper-V. Compile-tested on x86 and run-tested on Windows 10 21H2 (Hyper-V). Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* x86: sort alphabetically default packagesAlberto Bursi2021-11-061-3/+4
| | | | | | | | | sorting alphabetically default packages and placing them on their own line. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> [fixed whitespaces before tab, double whitespaces] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: enable kmod-tg3 on 64-bit by defaultAlberto Bursi2021-11-061-1/+2
| | | | | | | | | | | | | Gigabit ethernet adapters using BCM5719/5720 chipset are common on servers and as easy/cheap to get as Intel based ones. Usually found in 2-port and 4-port cards. Also some devices recently added to x86_64 target like the Meraki MX100 use this chipset for 8 of their 12 integrated ports. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* kernel: bump 5.10 to 5.10.73Rui Salvaterra2021-10-212-18/+5
| | | | | | Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* x86/64: enable MMIO_CMDLINE_DEVICES for firecracker supportPaul Spooren2021-10-121-0/+1
| | | | | | | | | | | | | This Kernel option allows to run OpenWrt witin a `firecracker` micro VM. Firecracker is a KVM-based tool for superfast booting VMs on x86_64 and aarch64. It makes rootfs available to the guest as a virtio-mmio device and passes its address via the kernel cmdline. A kernel without CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES will not recognize the rootfs virtio-mmio device. Suggested-by: Packet Please <pktpls@systemli.org> Signed-off-by: Paul Spooren <mail@aparcar.org>
* Revert "gpio-cdev: add nu801 userspace driver"Christian Lamparter2021-10-102-2/+2
| | | | | | | | | | | This reverts commit f536f5ebddd9c532a08ac4a9be3ef0c02f7bfeb8. As Hauke commented, this causes builder failures on 5.4 kernels. This revert includes changes to the mx100 kernel modules dependency as well as the uci led definitions. Tested-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: add support for Meraki MX100Chris Blake2021-10-106-0/+369
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit will add support for the Meraki MX100 in OpenWRT. Specs: * CPU: Intel Xeon E3-1200 Series 1.5GHz 2C/4T * Memory: 4GB DDR3 1600 ECC * Storage: 1GB USB NAND, 1TB SATA HDD * Wireless: None * Wired: 10x 1Gb RJ45, 2x 1Gb SFP UART: The UART header is named CONN11 and is found in the center of the mainboard. The pinout from Pin 1 (marked with a black triangle) to pin 4 is below: Pin 1: VCC Pin 2: TX Pin 3: RX Pin 4: GND Note that VCC is not required for UART on this device. Booting: 1. Flash/burn one of the images from this repo to a flash drive. 2. Take the top off the MX100, and unplug the SATA cable from the HDD. 3. Hook up UART to the MX100, plug in the USB drive, and then power up the device. 4. At the BIOS prompt, quickly press F7 and then scroll to the Save & Exit tab. 5. Scroll down to Boot Override, and select the UEFI entry for your jumpdrive. Note: UEFI booting will fail if the SATA cable for the HDD is plugged in. The issue is explained under the Flashing instructions. Flashing: 1. Ensure the MX100 is powered down, and not plugged into power. 2. Take the top off the MX100, and unplug the SATA cable from the HDD. 3. Using the Mini USB female port found by the SATA port on the motherboard, flash one of the images to the system. Example: `dd if=image of=/dev/sdb conv=fdatasync` where sdb is the USB device for the MX100's NAND. 4. Unplug the Mini USB, hook up UART to the MX100, and then power up the device. 5. At the BIOS prompt, quickly press F7 and then scroll to the Boot tab. 6. Change the boot order and set UEFI: USB DISK 2.0 as first, and USB DISK 2.0 as second. Disable the other boot options. 7. Go to Save & Exit, and then select Save Changes and Reset Note that OpenWRT will fail to boot in UEFI mode when the SATA hard drive is plugged in. To fix this, boot with the SATA disk unplugged and then run the following command: `sed -i "s|hd0,gpt1|hd1,gpt1|g" boot/grub/grub.cfg` Once the above is ran, OpenWRT will boot when the HDD is plugged into SATA. The reason this happens is the UEFI implementation for the MX100 will always set anything on SATA to HD0 instead of the onboard USB storage, so we have to accomidate it since OpenWRT's GRUB does not support detecting a boot disk via UUID. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: remove obsolete Kernel 5.4Paul Spooren2021-10-0210-2009/+0
| | | | | | | With the upgrade to Kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: use device vendor/model variableMoritz Warning2021-09-234-5/+10
| | | | | | | | Remove use of DEVICE_TITLE in favor of the DEVICE_VENDOR and DEVICE_MODEL as used by all other targets. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* x86: switch to kernel 5.10Paul Spooren2021-09-081-2/+1
| | | | | | | Seems to be working fine in QEMU and the wild. Signed-off-by: Paul Spooren <mail@aparcar.org> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: move two symbols to the generic kconfigsRui Salvaterra2021-08-294-8/+0
| | | | | | | CONFIG_RCU_{NEED_SEGCBLIST,STALL_COMMON} are set basically everywhere. Move them to the generic kconfigs. And resort the generic kconfigs while at it. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.142John Audia2021-08-211-1/+1
| | | | | | | | | | | | | | | Removed upstreamed: hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.60Rui Salvaterra2021-08-211-1/+1
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: add various missing config symbolsDavid Bauer2021-08-105-3/+2
| | | | | | Fixes commit 91a52f22a13d ("treewide: backport support for nvmem on non platform devices") Signed-off-by: David Bauer <mail@david-bauer.net>
* x86: include kmod-fs-vfat by default in generic imagesDaniel Golle2021-07-202-2/+2
| | | | | | | | | As x86/64 and x86/generic may be using UEFI, mounting the FAT-32 /boot is necessary in order not to loose configuration files accross sysupgrades. Include kmod-fs-vfat by default to make sure /boot can always be mounted. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: kernel: set NR_CPUS to 512Edgar Su2021-07-182-4/+4
| | | | | | | | | | NR_CPUS limits the number of CPUs supported to 8. This makes total sense on hardware-restircted platforms, but not on x86_64, where CPUs with more than 8 cores can be easily acquired and with less physical limitaions. see also: https://forum.openwrt.org/t/x86-64-8-cpu-limitation-on-vanilla-release/100946 Signed-off-by: Edgar Su <sjs333@outlook.com>
* x86: add upgrade support to diag.shChris Blake2021-06-101-0/+4
| | | | | | | | | Similar to how this is done in the diag.sh found in the base-files package, we should blink our status LED (if we have one) during the upgrade process. This follows the same blink pattern as seen at ./package/base-files/files/etc/diag.sh#L36 Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: add Roqos Core RC10 ethernet interfacesTomasz Maciej Nowak2021-06-061-0/+3
| | | | | | | | | | | | | | | | | | | eth0 -> single NIC (i211at) eth1 -> single NIC (i211at) -> 4-port unmanaged switch (BCM53125U) Notes UART is exposed on J4 connector, pinout starting from pin marked 1: 1. GND, 2. NC?, 3. NC?, 4. RX, 5. TX, 6. NC? baud: 115200, parity: none, flow control: none The board is setup by coreboot with UEFI. To enter setup screen hold ESC key on boot. The 5-LED multicolor matrix is attached on first I2C device named "Synopsys DesignWare I2C adapter" at address 0x60. Controlling values are stored in /opt/roqos/etc/rcLED.conf of original firmware. Remember to backup the original firmware, there are no downloadable copies. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* x86: kernel: enable Fusion-MPT SAS driverMark Carroll2021-06-062-0/+2
| | | | | | | Compile in MPT SAS driver required to mount rootfs on some VMWare systems (e.g. required for 1&1 IONOS). Signed-off-by: Mark Carroll <git@markcarroll.net>
* treewide: switch the timer frequency to 100 HzRui Salvaterra2021-04-211-2/+0
| | | | | | | | Some targets select HZ=100, others HZ=250. There's no reason to select a higher timer frequency (and 100 Hz are available in every architecture), so change all targets to 100 Hz. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* x86: amd-xgbe: add missing dependencies on 5.10Chuanhong Guo2021-04-181-1/+1
| | | | | | | | | fix the following build error when building with test kernel: Package kmod-amd-xgbe is missing dependencies for the following libraries: mdio_devres.ko Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* x86/64: Add support for AMD SOC Ethernet controllerZheng Bao2021-04-172-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature is already supported in kernel. Add definition and configuration in Makefile of OpenWRT. It is tested on board Dibbler with processor V1605B. Dmesg is as below. -------------------------------------------- [ 0.317122] smpboot: CPU0: AMD Ryzen Embedded V1605B with Radeon Vega Gfx (family: 0x17, model: 0x11, stepping: 0x0) [ 8.227270] libphy: amd-xgbe-mii: probed [ 8.228189] amd-xgbe 0000:02:00.1 eth0: net device enabled [ 8.228999] libphy: amd-xgbe-mii: probed [ 8.229921] amd-xgbe 0000:02:00.2 eth1: net device enabled ..... [ 11.760869] br-lan: port 1(eth0) entered blocking state [ 11.761365] br-lan: port 1(eth0) entered disabled state [ 11.762019] device eth0 entered promiscuous mode [ 11.785285] 8021q: adding VLAN 0 to HW filter on device eth1 [ 16.881431] amd-xgbe 0000:02:00.1 eth0: Link is Up - 1Gbps/Full - flow control off [ 16.882108] br-lan: port 1(eth0) entered blocking state [ 16.882583] br-lan: port 1(eth0) entered forwarding state [ 16.883249] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready ----------------------------------------------- Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
* kernel: Move CONFIG_USERIO to generic configHauke Mehrtens2021-03-272-2/+0
| | | | | | | | The CONFIG_USERIO option is unset in multiple target configurations. On the sunxi target it is activated. Move the kernel configuration option to the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86/base-files: add support for Sophos SG/XG-105Stan Grishin2021-03-262-0/+11
| | | | | | | This adds detection of the Sophos SG-105 and Sophos XG-105 models and assignment of ethernet ports these models have to LAN/WAN. Signed-off-by: Stan Grishin <stangri@melmac.net>
* kernel: drop apu2 reboot patchKevin Darbyshire-Bryant2021-03-242-38/+0
| | | | | | | | | | | | | | | | | | | | | | This patch really annoys me, either it needs to go upstream or be dropped, so it's going to be dropped here. Checking drivers/platform/x86/pcengines-apuv2.c it also appears to be incomplete since it mentions different dmi board names depending on bios version. /* APU2 w/ legacy BIOS < 4.0.8 */ is 'APU2' /* APU2 w/ legacy BIOS >= 4.0.8 */ is 'apu2' /* APU2 w/ mainline BIOS */ is 'PC Engines apu2' So the patch, if applicable at all, only 'works' for legacy BIOS >= 4.0.8 My APU2 on mainline BIOS reboots fine without this patch. So let's see if anyone screams and when they do question why legacy bios. If patch DOES need to be re-introduced then it needs to go upstream first. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 5.10 to 5.10.24Kevin Darbyshire-Bryant2021-03-241-1/+1
| | | | | | | | Straightforward refresh of patches using update_kernel. Run tested: x86_64 (apu2) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: add missing config symbols, fix typosTony Ambardar2021-03-194-7/+0
| | | | | | | | | | Update 5.10 generic config to add missing options prompting during builds, when setting CONFIG_ALL_KMODS. Refresh the x86 subtargets to drop symbols added to the generic config. Also fix a typo in 5.4/5.10 generic configs: "CONFIG_CONFIG_KVM_AMD_SEV". Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: move some disabled symbols to genericAleksander Jan Bajkowski2021-03-194-8/+0
| | | | | | Move some disabled symbols found in armvirt target to generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* x86/legacy: fix subtarget CPU for kernel 5.10Tony Ambardar2021-03-151-0/+5
| | | | | | | | | | | | The 5.10 target config defined a baseline i686 CPU aligned to the 32-bit generic subtarget. However, the legacy subtarget arch wasn't set to the older 586MMX, defaulting instead to the i686. Explicitly set the subtarget arch and refresh the subtarget config, as done already with the old geode subtarget. Fixes: 8391781389 ("x86: support kernel 5.10") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* x86: support kernel 5.10Tony Ambardar2021-03-1411-1/+1890
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add linux 5.10 as testing kernel, copy generic/subtarget configs and target patches from 5.4. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: update target patches for kernel 5.10 Refresh all patches while also dropping: 800-hwmon-w83627ehf-dont-claim-nct677x.patch which is now upstreamed as: 3207408ab4cb ("hwmon: (w83627ehf) remove nct6775 and nct6776 support") Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: refresh 5.10 target config Refresh config using "make kernel_oldconfig". Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: refresh and test all subtarget configs Refresh configs using "make kernel_oldconfig CONFIG_TARGET=subtarget". Build and run-tested using QEMU: x86/64, x86/legacy, x86/generic. Build-tested only: x86/geode. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [squashed commits] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 5.4 to 5.4.105John Audia2021-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Removed upstreamed generic-backports: 830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch 831-v5.9-usbip-tools-fix-build-error-for-multiple-definition.patch 755-v5.8-net-dsa-add-GRO-support-via-gro_cells.patch Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64] [squash patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>