aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/x86
Commit message (Collapse)AuthorAgeFilesLines
* x86: Fix xen serial console by removing conflicting PATA driverBaptiste Jonglez2017-07-162-2/+0
| | | | | | | | | | | | | | | | | | | | | The Xen serial console has been broken since the xen_domu subtarget was merged in the generic x86 subtarget (commits 1d6879ee and 371b382a). The reason for the broken serial console seems to be an IRQ conflict between the serial console driver and the PATA_LEGACY driver: [ 1.330125] genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (platform[pata_legacy.4]) [ 1.330134] hvc_open: request_irq failed with rc -16. [ 1.330148] Warning: unable to open an initial console. Just drop the PATA_LEGACY driver from the x86/generic and x86_64 subtargets, since this driver is marked experimental and only supports very old ISA devices anyway. It is still included in the x86/legacy subtarget where it rightfully belongs. Fixes: FS#787 Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* x86/64: add xen DomU supportBaptiste Jonglez2017-07-162-1/+68
| | | | | | | | | | Xen support for x86/generic was added in 1d6879ee. This commit also enables it for x86/64. This was successfully tested with Xen 4.5, although the serial console is broken in the same way as x86/generic (see FS#787) Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* x86: Move USB support from subtargets to target configBaptiste Jonglez2017-07-165-38/+11
| | | | | | | | | All x86 subtargets enable USB support, so it makes sense to enable it in the target config instead, to avoid duplication. Also refresh subtarget configs accordingly. Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* x86: Refresh subtargets kernel configBaptiste Jonglez2017-07-164-72/+10
| | | | | | | | | | | | | | | | | This was done by simply running `make kernel_menuconfig CONFIG_TARGET=subtarget` and then saving without changing any option. Most of the removed options can be explained because they are already present in the target config or in the generic 4.9 config: - PAE-related options, enabled by default on x86 by 961c0eac - LZO-related options, enabled by default since 4.9 As far as I understand the build system, this shouldn't have any user-visible impact, because the build system already merges the various kernel configs during build. Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* x86: Drop stray subtarget "epia"Baptiste Jonglez2017-07-161-213/+0
| | | | | | | | | This subtarget was added by 961c0eac, probably by mistake. It does not contain anything beside a kernel config. Acked-by: Daniel Golle <daniel@makrotopia.org> Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* treewide: use only board_name function to get nameMathias Kresin2017-07-152-6/+2
| | | | | | | | | | | | Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree compatible string directly. Always use the board_name function to get the board name. The admswconfig package still reads /proc/cpuinfo directly. The code looks somehow broken and the whole adm5120 which uses this package looks unmaintained. Leave it as it is for now. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: populate boardname and model earlierMathias Kresin2017-07-151-0/+0
| | | | | | | | | | | | | For targets using the generic board detection and board specific settings in diag.sh, the board name is still unset at the time the set_state() provided by diag.sh is called by 10_indicate_preinit. Change the execution order to ensure the boardname is populated before required the first time. Do the target specific board detection as early as possible, directly followed by the generic one to allow a seamless switch to the generic function for populating /tmp/sysinfo/. Signed-off-by: Mathias Kresin <dev@kresin.me>
* scripts/gen_image_generic.sh: move from x86/imageStijn Tintel2017-07-142-38/+1
| | | | | | The script can also be useful for other targets. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* build: enable gzipping of images on x86 even if ext4 is disabledFelix Fietkau2017-07-061-4/+2
| | | | | | | There is lots of padding between the boot partition and the rootfs, so gzipping is helpful here Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: cleanup CONFIG_SCHED_HRTICKStijn Tintel2017-06-291-1/+0
| | | | | | | Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the generic config in b47fd7656336162360ebf66147326763ddae3f8d. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: disable CONFIG_SG_POOL by defaultSergey Ryazanov2017-06-071-0/+1
| | | | | | | | CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last one is disabled by default then disable CONFIG_SG_POOL by default too. And explicitly enable it only for platforms that use CONFIG_SCSI. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* x86: include USB HID by defaultLucian Cristian2017-06-071-0/+3
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* Add missing APU1 reference to x86 board.dKristian Evensen2017-06-062-2/+2
| | | | | | | | | | | | x86 board.d only contains a case for the APU2, not the APU1. This causes, for example, network configuration not to be created correctly. Even though the APU1 seems to reaching EOL, there a still a lot of them out there. The APU1 and APU2 is configured in the same way and this patch should also be considered for stable, as the error also exists there. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
* x86: disable X2APIC support for legacy subtargetsJo-Philipp Wich2017-06-022-0/+2
| | | | | | | | | Explicitely disable X2APIC support on legacy targets since the targeted processor types do not support it anyway there. Fixes FS#285. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: sysupgrade: explicitly rescan disk after writing partition tableMatthias Schiffer2017-05-291-0/+6
| | | | | | | This should ensure that the kernel partition can be mounted in platform_copy_config when its size has changed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* x86: sysupgrade: refactor platform_do_upgradeMatthias Schiffer2017-05-291-33/+36
| | | | | | | By returning early when no upgrade device can be found and handling the SAVE_PARTITIONS=0 case differently, we can get rid of two levels of if. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* x86: sysupgrade: move partition table change check to platform_check_imageMatthias Schiffer2017-05-291-4/+25
| | | | | | | The staged sysupgrade will prevent us from using ask_bool in platform_do_upgrade; therefore, the check is moved to platform_check_image. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* x86: fix build of geode targetHauke Mehrtens2017-05-271-0/+1
| | | | | | The build bot complained that the OLPC option was not set. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86/legacy: disable PAE againDaniel Golle2017-05-251-1/+1
| | | | | | | | | | | commit 961c0eacea ('x86: fix lifting kernel CPU requirements and always enable PAE') broke some older geode boards such as Soekris net4826. Hence disable PAE on x86/legacy again in order to still support those very old non-PAE capable CPUs. Fixes FS#773 - PAE broke Soekris net4826 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86_64: add drivers for Xeon controller hub based GPIOPhilip Prindeville2017-05-251-2/+4
| | | | | | | These drivers are in many reference-design Xeon, iCore, or Atom64 based server boards. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: update kernel 4.9 to 4.9.29Koen Vandeputte2017-05-211-4/+2
| | | | | | | | | | | | | - Refresh all patches - Removed upstreamed - Adapted 1 Compile tested on: bcm53xx, cns3xxx, imx6, lantiq Run tested on: cns3xxx & imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [update from 4.9.28 to 4.9.29] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add hwmon for W83627EHF and familyPhilip Prindeville2017-05-171-0/+32
| | | | | | | | Remove support for NCT6775/6 from W83627EHF driver so the NCT6775 driver will still be used for those chips. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* x86: fix lifting kernel CPU requirements and always enable PAEDaniel Golle2017-05-053-10/+243
| | | | | | | | | commit 89878f60f4 x86: lift kernel minimum CPU requirement to Pentium MMX caused kconfig havoc. Fix this and make sure PAE is enabled even on legacy CPUs as the minimum required CPU has been Pentium MMX for a while now and hence PAE is supported even on the x86_legacy target. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86/legacy: add missing config symbolJo-Philipp Wich2017-05-051-0/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: lift kernel minimum CPU requirement to Pentium MMXDaniel Golle2017-05-053-3/+3
| | | | | | | Anything older than that isn't supported since commit f4f8f4a180366, hence also switch to Pentium MMX when building the kernel. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: generic: use HIGHMEM64G instead of HIGHMEM4GDaniel Golle2017-05-051-1/+2
| | | | | | | | commit 4b4f73937371 switched on HIGHMEM4G which implicitely disabled PAE and hence also NX and other useful and security-relevant features. Re-enable PAE by switching to HIGHMEM64G. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: keep /boot mounted for kexecDaniel Golle2017-05-051-4/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: enable 4G high memory support for generic (32bit) subtargetJo-Philipp Wich2017-04-272-4/+8
| | | | | | | | | This is required to fully support a number of 32bit x86 systems equipped with more than one GB ram, e.g. certain Atom CPU machines. Ref: https://forum.lede-project.org/t/17-01-1-x86-doesnt-detect-all-of-the-ram/3295 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: allow specifying flow-control to grub on serial consolePhilip Prindeville2017-04-031-2/+2
| | | | | | | On the more sophisticated (i.e. deeper FIFO) serial controllers, flow-control might be needed to avoid dropping output. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* x86: enable ACPI support for the Geode subtargetFelix Fietkau2017-03-221-1/+60
| | | | | | | Most or all newer Geode device have ACPI hardware support Should fix FS#577 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: image: drop duplicated copy of bzImage into vmlinuzRafał Miłecki2017-03-161-1/+0
| | | | | | It's already done once few lines earlier in the Image/Build/iso. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: Add intel_idle driver to x86_64 buildMichael Marley2017-03-141-0/+1
| | | | | | | | | This driver supports CPU-specific idle features on recent Intel processors. It does not conflict with the ACPI idle driver and that driver will continue to be used for unsupported and non-Intel processors. Signed-off-by: Michael Marley <michael@michaelmarley.com>
* kernel: Add coretemp driver to x86_64 buildMichael Marley2017-03-141-0/+1
| | | | | | | | The x86_64 build already has the k10temp driver for AMD processors built in, so this patch adds the coretemp driver for the same functionality on Intel processors. Signed-off-by: Michael Marley <michael@michaelmarley.com>
* x86: image: drop unneeded grub callRafał Miłecki2017-03-121-1/+0
| | | | | | | It appears there isn't any Image/Build/grub/* define so this step looks redundant. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* x86: image: drop unused ROOTDELAY variableRafał Miłecki2017-03-121-2/+0
| | | | | | | It's unused since commit 742700719303 ("x86: remove the olpc subtarget, it has been unmaintained for a long time"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: enable hwmon-k10temp in the x86/64 kernel config instead of packaging itFelix Fietkau2017-02-261-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86_64: Add support for EFI framebuffer (FS#515)Alif M. Ahmad2017-02-211-1/+2
| | | | | | | | | | | | | | | CONFIG_FB_EFI and CONFIG_FB_SIMPLE are needed to display console text on EFI framebuffer. CONFIG_FB_EFI is needed when the kernel is directly launched via EFI shell or EFI startup.nsh script. CONFIG_FB_SIMPLE is needed when launching the kernel via grub2 efi. In this case, grub2 has prepared a gfxterm framebuffer and the kernel just need to use the already prepared grub's gfxterm framebuffer to display console text. Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* x86: Add Geos profile for Geode subtargetDavid Woodhouse2017-02-173-0/+44
| | | | | | | | | | This makes the Geode images actually useful again. The Geos profile should include the relevant hardware for that board, and the Default profile adds the via-rhine adapter which seems to have been present in the net5501 and alix targets killed in commit 9e0759ea265 ("x86: merge all geode based subtargets into one"). Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: Add board configs for the PC Engines APU2Chris Blake2017-02-152-0/+8
| | | | | | | | This adds the default LED and network settings for the PC Engines APU2 when running under the x86 target. [dwmw2: Change Ethernet port setup] Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: Enable DIAG LED on GeosDavid Woodhouse2017-02-152-1/+79
| | | | | | | | | Based on a patch from Chris Blake <chrisrblake93@gmail.com>, except let's do it by using the LED configuration instead of hard-coding it for each board type. And try using /bin/board_detect to do the default behaviour, on the first boot where the config hasn't yet been generated. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: Move Traverse Geos configs into x86 base-filesChris Blake2017-02-152-0/+0
| | | | | | | | | | This change moves the files in 657418d to the root of the x86 target. This is done in preperation for adding more devices under other subtargets. CC: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: Add configuration back for Traverse GeosDavid Woodhouse2017-02-112-0/+45
| | | | | | | | When we merged all the Geode boards into one generic target, the default network and LED configuration was lost. Put it back. Fixes: 9e0759ea2653 ("x86: merge all geode based subtargets into one") Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: remove linux 4.4 supportFelix Fietkau2017-02-077-692/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: switch to Linux 4.9Felix Fietkau2017-02-078-43/+599
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Kernel: bump to 4.4.44Stijn Segers2017-01-274-29/+13
| | | | | | | | Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64. .44 has been run-tested on the 17.01 branch here on ar71xx and mt7621. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* x86/64: Enable GPIO sysfs & GPIO LED supportChris Blake2017-01-271-0/+9
| | | | | | | | The following changes enables GPIO sysfs as well as the LEDS_GPIO option within the kernel. This is required to enable LEDs over a GPIO interface. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: fix sysupgrades on disks with 4k block sizeFelix Fietkau2017-01-251-9/+2
| | | | | | | Even when the disk uses 4k blocks, the partition table still uses units of 512 byte sectors. Always use ibs=512 for the offsets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: unify CPU_TYPE for legacy and geodeFelix Fietkau2017-01-241-2/+0
| | | | | | | | | | According to some reports, -march=pentium-mmx is a better choice for older Geode CPUs than -march=geode anyway. Bump the minimum architecture of the legacy target from i486 to pentium-mmx. Anything older is not worth supporting anyway. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: add kernel module for sp5100_tco watchdogChris Blake2017-01-161-0/+15
| | | | | | | | | | | This change adds the sp5100_tco driver as a kernel module for the x86 target. Specifically, this can be used by the PCEngines APU2/APU3. The reason for having this as a kernel module is to allow users to load/unload it on demand, as the I2C interface on the APU2/APU3 will not work while this module is loaded. More info can be found on GitHub at https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736 Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: Add sp5100_tco AMD patchesChris Blake2017-01-164-0/+217
| | | | | | | | | | | | | | This adds the following patches to the x86 target: sp5100_tco: Add AMD Mullins platform support sp5100_tco: Add AMD Carrizo platform support sp5100_tco: fix the device check for SB800 and later chipsets watchdog: sp5100_tco: properly check for new register layouts With these added, the sp5100_tco driver can then be used on newer AMD platforms, such as the PCEngines APU2/APU3 boards. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 12:43:18 +0000