aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi
Commit message (Collapse)AuthorAgeFilesLines
* kernel: Set CONFIG_FRAME_WARN depending on targetHauke Mehrtens2023-06-021-1/+0
| | | | | | | | | This set the CONFIG_FRAME_WARN option depending on some target settings. It will use the default from the upstream kernel and not the hard coded value of 1024 now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 16a20512d852f6ecebf8c57cd7fa2572a06a9d0b)
* treewide: remove files for building 5.10 kernelNick Hainke2023-05-123-134/+0
| | | | | | | | | | | All targets are bumped to 5.15. Remove the old 5.10 patches, configs and files using: find target/linux -iname '*-5.10' -exec rm -r {} \; Further, remove the 5.10 include. Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: fix handling of CONFIG_DYNAMIC_DEBUGTony Ambardar2023-05-031-1/+0
| | | | | | | | | | Since CONFIG_DYNAMIC_DEBUG is already managed via the KERNEL_DYNAMIC_DEBUG setting in Config-kernel.in (default N), remove or disable it in target configs which unconditionally enable it, along with the related setting CONFIG_DYNAMIC_DEBUG_CORE. This saves several KB in the kernels for ipq40xx, ipq806x, filogic, mt7622, qoriq, and sunxi. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* sunxi: enable CONFIG_NVMEM_SYSFSJan-Niklas Burfeind2023-02-262-1/+1
| | | | | | | | | | in both the stable and the testing kernel h2+/h3/h5 devices have a Secure ID that can be read from `/sys/bus/nvmem/devices/sunxi-sid0/nvmem`. Enabling CONFIG_NVMEM_SYSFS grants sysfs access from userspace. Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* treewide: replace wpad-basic-wolfssl defaultRosen Penev2023-02-042-8/+8
| | | | | | | The newly merged mbedtls backend is smaller and has fewer ABI related issues than the wolfSSL one. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* sunxi: switch to kernel 5.15Stijn Tintel2023-01-0912-1253/+1
| | | | | | | | | The testing kernel has been available since early 2022, and is running fine for several people. Let's switch to it by default. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Karl Palsson <karlp@etactica.com> Tested-by: Jan-Niklas Burfeind <openwrt@aiyionpri.me>
* sunxi: ensure NanoPi R1 has unique MAC addressJan-Niklas Burfeind2022-12-251-0/+25
| | | | | | | | | | | | | | | | | | | | Ensure the MAC address for all NanoPi R1 boards is assigned uniquely for each board. The vendor ships the device in two variants; one with and one without eMMC; but both without static mac-addresses. In order to assign both board types unique MAC addresses, fall back on the same method used for the NanoPi R2S and R4S in case the EEPROM chip is not present by generating the board MAC from the SD card CID. [0] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R1#Hardware_Spec Similar too and based on: commit b5675f500daf ("rockchip: ensure NanoPi R4S has unique MAC address") Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* sunxi: fix board_name for MarsBoard A10Chukun Pan2022-12-171-9/+10
| | | | | | | The compatible in the device tree is "haoyu,a10-marsboard", modify the board_name to keep it consistent. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* sunxi: fix typo in device packages for MarsBoard A10Chukun Pan2022-12-171-2/+2
| | | | | | | | The kmod prefix for sound-soc-sunxi is missing, fix it. Also add kmod-sound-core as dependence. Fixes: 6a35659 ("sunxi: Added profile for HAOYU Electronics Marsboard A10") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* sunxi: fix sunxi-ir kconfig and descriptionChukun Pan2022-12-121-2/+3
| | | | | | | | | | | Removed a20 in description, since it only works for a10, a13 and a31. Also refreshed kernel config. Fixes: #10466 Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (moved fixes, refreshed, added CONFIG_DVB_USB=n) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* sunxi: modules: remove useless AddDepends/rtcChukun Pan2022-12-121-4/+2
| | | | | | | | | AddDepends/rtc has been removed in commit 3da7fe6, same here. Fixes: 3da7fe6 ("kernel: remove useless AddDepends/rtc abstraction") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (RTC_SUPPORT - though this is implied by the TARGET_sunxi) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic configAleksander Jan Bajkowski2022-10-212-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Endianness depends on CPU architecture. CONFIG_CPU_(BIG/LITTLE)_ENDIAN should be enabled on target or subtarget based on SoC architecture. Fixes warning: $ make kernel_oldconfig CONFIG_TARGET=subtarget ... .config:1008:warning: override: CPU_LITTLE_ENDIAN changes choice state .... Summary: - ARC - only the CONFIG_CPU_BIG_ENDIAN symbol is defined for this architeture. If it is disabled then the processor operates in LITTLE_ENDIAN mode (default), - ARM32 - CONFIG_CPU_LITTLE_ENDIAN symbol available since kernel 5.19. This option should be enabled after OpenWRT moves to kernel 6.x. After refreshing the kernel, the symbol disappears, - ARM64 - enabled CONFIG_CPU_LITTLE_ENDIAN, - MIPS - enabled relevant symbols, - POWERPC - enabled CONFIG_CPU_BIG_ENDIAN, - UML - Symbols are not defined for this architecture, - X86 - always little endian. Symbols are not defined for this architecture. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: bump 5.10 to 5.10.137Petr Štetiar2022-08-232-2/+2
| | | | | | | | | | Removed following upstreamed patch: * bcm53xx: 081-next-ARM_dts_BCM53015-add-mr26.patch All other patches automagically rebased. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: Activate CONFIG_GPIOLIB in generic configurationHauke Mehrtens2022-08-102-2/+0
| | | | | | | | All targets expect the malta target already activate the CONFIG_GPIOLIB option. Move it to generic kernel configuration and also activate it for malta. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-246-0/+12
| | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* sunxi/cortexa53: enable armv8-CE crypto algorithmsEneas U de Queiroz2022-06-042-0/+20
| | | | | | | This enables armv8 crypto extensions version of AES, GHASH, SHA1, and CRC T10 algorithms in the kernel. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* sunxi/cortexa53: refresh kernel 5.15 configEneas U de Queiroz2022-06-041-8/+6
| | | | | | | | | This is result of a make kernel_oldconfig CONFIG_TARGET=subtarget. One new option popped up: Support for the Allwinner H616 CCU (SUN50I_H616_CCU) [Y/n/?] (NEW) n Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: move some symbols to generic configAleksander Jan Bajkowski2022-04-093-14/+0
| | | | | | | | | | | | | | | | | | | This commit add some enabled symbols to generic config. LTO is only supported by clang compiler and therefore should be disabled in the generic config instead of duplicating this symbol in each target. CONFIG_LTO_NONE do this job. The second group of symbols is enabled by the options available in the generic config and is therefore added here: * CONFIG_AF_UNIX_OOB is selected by CONFIG_NET && CONFIG_UNIX, * CONFIG_BINARY_PRINTF is selected by CONFIG_BPF_SYSCALL, * CONFIG_NET_SOCK_MSG is selected by CONFIG_BPF_SYSCALL && CONFIG_NET. The other symbols are disabled and should be in the generic config. This commit also removes these symbols from subtargets. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* sunxi: update config for 5.15Petr Štetiar2022-03-291-6/+21
| | | | | | Refresh kernel config with `make kernel_oldconfig` make target. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: refresh kernel 5.15 patchesPetr Štetiar2022-03-291-1/+1
| | | | | | So the patches apply cleanly. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: rebase sun50i-h5-nanopi-r1s-h5.dts onto 5.15Petr Štetiar2022-03-291-8/+8
| | | | | | So the patch can be applied on top of 5.15 kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: enable 5.15 as testing kernelPetr Štetiar2022-03-291-0/+1
| | | | | | | So anyone interested can help with new kernel version integration and testing. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: copy config and patches from 5.10 to 5.15Petr Štetiar2022-03-2911-0/+874
| | | | | | | | | | | | So the upcoming changes needed for 5.15 can be reviewed easily. Removed following upstreamed patches: * 062-add-sun8i-h3-zeropi-support.patch * 100-sunxi-h3-add-support-for-nanopi-r1.patch * 101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: cortexa7: fix ethernet link detection on a20-olinuxino-lime2Petr Štetiar2022-03-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | a20-olinuxino-lime2 is currently having hard time with link detection of certain 1000Mbit partners due to usage of generic PHY driver, probably due to following missing workaround introduced in upstream in commit 3aed3e2a143c ("net: phy: micrel: add Asym Pause workaround"): The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric Pause capability is set. This issue is described in a Silicon Errata (DS80000691D or DS80000692D), which advises to always disable the capability. This patch implements the workaround by defining a KSZ9031 specific get_feature callback to force the Asymmetric Pause capability bit to be cleared. This fixes issues where the link would not come up at boot time, or when the Asym Pause bit was set later on. As a20-olinuxino-lime2 has Micrel KSZ9031RNXCC-TR Gigabit PHY since revision H, so we need to use Micrel PHY driver on those devices. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: delete Linux 5.4 config and patchesDaniel Golle2022-03-2119-2003/+0
| | | | | | | | As the upcoming release will be based on Linux 5.10 only, remove all kernel configuration as well as patches for Linux 5.4. There were no targets still actively using Linux 5.4. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-012-2/+2
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* sunix: fix typo in kmod-ata-corePaul Spooren2022-02-181-1/+1
| | | | | | | There was a missing `k` in the package name. s/mod-ata-core/kmod-ata-core Signed-off-by: Paul Spooren <mail@aparcar.org>
* sunxi: make use of 'rootfs-part' featureDaniel Golle2022-01-231-1/+1
| | | | | | | Use 'rootfs-part' feature instead of referencing the TARGET_sunxi in Config-images.in. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.89Rui Salvaterra2022-01-031-32/+0
| | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0186-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch [1] sunxi/patches-5.10/103-arm64-dts-allwinner-orangepi-zero-plus-fix-PHY-mo.patch [2] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.89&id=ba696b470839d70c6b8290c1f798bac7fb2a584c [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.89&id=93a957bbf46ceb224b959de61fe85cfc6f71b6c7 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* sunxi: Use rtl8723bu-firmware instead of rtl8723bs-firmwareHauke Mehrtens2021-12-271-4/+4
| | | | | | | | The firmware for the rtl8723bs chip is now included in the rtl8723bu-firmware package. Fixes: 397dfe4a97e6 ("linux-firmware: Update to version 20121216") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: 5.10: consolidate mac80211 crypto optionsSergey Ryazanov2021-12-171-2/+0
| | | | | | | | | | | | | | | | | | | | | | Each of - CRYPTO_AEAD2 - CRYPTO_AEAD - CRYPTO_GF128MUL - CRYPTO_GHASH - CRYPTO_HASH2 - CRYPTO_HASH - CRYPTO_MANAGER2 - CRYPTO_MANAGER - CRYPTO_NULL2 either directly required for mac80211 crypto support, or directly selected by such options. Support for the mac80211 crypto was enabled in the generic config since c7182123b9 ("kernel: make cryptoapi support needed by mac80211 built-in"). So move the above options from the target configs to the generic config to make it clear why do we need them. CC: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: filter out both Clang and LLD versionsSergey Ryazanov2021-12-171-1/+0
| | | | | | | | Both CLANG_VERSION and LLD_VERISON are autogenerated runtime configuration options, so add them to the kernel configuration filter and remove from generic and per-target configs to keep configs clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* sunxi: update nanopi neo air that use brcmfmac43430a0Michel Promonet2021-12-021-1/+1
| | | | | | | | Update wifi firmware used for nanopi neo air, with cypress-firmware-43430-sdio there is no wifi detected, as brcmfmac-firmware-43430a0-sdio allow to acces to wifi. Signed-off-by: Michel Promonet <michel.promonet@free.fr>
* kernel: Deactivate B53 symbols in generic configurationHauke Mehrtens2021-11-292-8/+0
| | | | | | | | | Deactivate all the symbols of the B53 DSA driver in the generic kernel configuration. Multiple targets are now using this drivers and they only need some of the options. This fixes the bcm4908 build which didn't deactivate all of the options. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: remove kmod-rtc-sunxi for unsupported devicesChukun Pan2021-11-291-10/+10
| | | | | | | | | | | | | | | | From driver source: { .compatible = "allwinner,sun4i-a10-rtc", .data = &data_year_param[0] }, { .compatible = "allwinner,sun7i-a20-rtc", .data = &data_year_param[1] }, The rtc-sunxi module only supports allwinner a10 and a20 SoCs, other SoCs in the cortexa7 and cortexa53 subtarget using the CONFIG_RTC_DRV_SUN6I driver which is compiled into the kernel binary, so remove this package for these unsupported devices. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* sunxi: build kernel with sun6i-rtc driverDaniel Golle2021-11-212-0/+2
| | | | | | | | | | | | | | | | | sun6i-rtc cannot be built as a module and the hardware is only present in some of the sunxi SoCs, see driver source: { .compatible = "allwinner,sun6i-a31-rtc" }, { .compatible = "allwinner,sun8i-a23-rtc" }, { .compatible = "allwinner,sun8i-h3-rtc" }, { .compatible = "allwinner,sun8i-r40-rtc" }, { .compatible = "allwinner,sun8i-v3-rtc" }, { .compatible = "allwinner,sun50i-h5-rtc" }, { .compatible = "allwinner,sun50i-h6-rtc" }, Set CONFIG_RTC_DRV_SUN6I=y in kernel config file for cortexa7 and cortexa53 subtargets which covers all of the above. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "sunxi: add rtc-sun6i driver package"Daniel Golle2021-11-211-18/+0
| | | | | | | sun6i-rtc is a builtin_platform_driver and cannot be built as a module. Hence this reverts commit e178d9a5494747a9b6ea34f2fc9e798b4b1ecc16. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add rtc-sun6i driver packageZhao Yu2021-11-201-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | AP6212 wifi need wifi_pwrseq, but from OrangePi Lite 2 dts : wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc 1>; clock-names = "ext_clock"; reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ post-power-on-delay-ms = <200>; }; this pwrseq need rtc clock, or kernel won't find this device. but now rtc-sunxi.c only support A10/A20. Orangepi Lite 2 use H6 ,from rtc-sun6i.c show compatible is { .compatible = "allwinner,sun6i-a31-rtc" }, { .compatible = "allwinner,sun8i-a23-rtc" }, { .compatible = "allwinner,sun8i-h3-rtc" }, { .compatible = "allwinner,sun8i-r40-rtc" }, { .compatible = "allwinner,sun8i-v3-rtc" }, { .compatible = "allwinner,sun50i-h5-rtc" }, { .compatible = "allwinner,sun50i-h6-rtc" }, So it need this to let kernel find this mmc wifi device. As suggested by hauke, let it build as package. Signed-off-by: Zhao Yu <574249312@qq.com>
* sunxi: 5.10: Orange Pi Zero Plus: Fix networkingRobert Marko2021-11-191-0/+32
| | | | | | | | | | | | | | | | Orange Pi Zero Plus uses a Realtek RTL8211E RGMII Gigabit PHY, but its currently set to plain RGMII mode meaning that it doesn't introduce delays. With this setup, TX packets are completely lost and changing the mode to RGMII-ID so the PHY will add delays internally fixes the issue. It looks like this got broken in 5.10 as the PHY RGMII config got fixed due to datasheet being available and a lot of boards got broken by that. This has already been sent upstream and received multiple reviews. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: Set some options in generic configurationHauke Mehrtens2021-11-021-1/+0
| | | | | | | Add CONFIG_USB_ETH and CONFIG_PWM_JZ4740 to generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Nanopi R1S H5: enable LAN LED configurationChukun Pan2021-10-302-0/+60
| | | | | | This enables the LEDs on the LAN interfaces. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* sunxi: add support for FriendlyARM NanoPi R1S H5Chukun Pan2021-10-309-19/+587
| | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: CPU: Allwinner H5, Quad-core Cortex-A53 DDR3 RAM: 512MB Network: 10/100/1000M Ethernet x 2 USB Host: Type-A x 1 MicroSD Slot x 1 MicroUSB: for power input Debug Serial Port: 3Pin pin-header LED: WAN, LAN, SYS KEY: Reset Power Supply: DC 5V/2A Installation: Write the image to SD Card with dd. Note: 1. OpenWrt currently does not support LED_FUNCTION, change back to the previous practice (Consistent with NanoPi R1). 2. Since the upstream commit https://github.com/torvalds/linux/bbc4d71 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), we need to change the phy-mode from rgmii to rgmii-id. So set phy-mode for 5.4 and 5.10 respectively. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* sunxi: deselect CONFIG_VIDEO_SUN6I_CSI by defaultDaniel Golle2021-10-291-0/+1
| | | | | | | | Deselect CONFIG_VIDEO_SUN6I_CSI Kconfig symbol for now. If anyone wants to use CSI (camera interface) they should package the kernel module. After this change, sunxi targets build again. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add CONFIG_ARM_CRYPTO Kconfig symbolDaniel Golle2021-10-291-0/+1
| | | | | | | And another missing symbol... Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add yet another missing Kconfig symbolDaniel Golle2021-10-291-0/+1
| | | | | | Set CONFIG_CRYPTO_CRCT10DIF_ARM_CE=y for sunxi targets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add missing CONFIG_VIDEO_SUN4I_CSI Kconfig symbolDaniel Golle2021-10-291-0/+1
| | | | | | | Simply disable this for now, if anyone wants to use CSI feel free to package it as a kernel module package. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: switch to Kernel 5.10Paul Spooren2021-10-251-2/+2
| | | | | | | | Compile tested and run tested on Pine64+. Acked-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Paul Spooren <mail@aparcar.org>
* sunxi: 5.10: enable sun8i-thermalChukun Pan2021-10-242-1/+2
| | | | | | | | | | | | Enable the sun8i-thermal driver to allow reading the temperature of the SoC. As suggested by mans0n, disable this driver in the a8 subtarget because it does not support yet. Tested on NanoPi R1S H5. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: Deactivate some ARM64 errata workaroundsHauke Mehrtens2021-10-032-8/+0
| | | | | | | | | | | This deactivates the following workarounds for erratas in ARM64 CPUS: CONFIG_ARM64_ERRATUM_1165522: Cortex-A76 cores (r0p0, r1p0, r2p0) CONFIG_ARM64_ERRATUM_1286807: Cortex-A76 cores (r0p0 to r3p0) CONFIG_ARM64_ERRATUM_1418040: Cortex-A76/Neoverse-N1 cores (r0p0 to r3p1) CONFIG_CAVIUM_TX2_ERRATUM_219: Cavium ThunderX2 CONFIG_FUJITSU_ERRATUM_010001: Fujitsu-A64FX Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Refresh kernel 5.10 configurationHauke Mehrtens2021-10-033-115/+18
| | | | | | | | The cortex53 subtarget was missing multiple config options and the other targets just defined some options which are not needed. Fixes: 83672f506d95 ("sunxi: add testing Linux 5.10") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 08:52:52 +0000