aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
Commit message (Collapse)AuthorAgeFilesLines
* ramips: fix lzma-loader for buffalo_WSR_600DHPHaoan Li2023-04-231-0/+1
| | | | | | | | This fixes a well known "LZMA ERROR 1" error, reported previously on numerous of similar devices. Fixes: #11919 Signed-off-by: Haoan Li <lihaoan1001@163.com>
* generic: 5.15: replace ramips AR8033 fiber patch with 5.18 patchesDaniel Kestrel2023-04-221-184/+0
| | | | | | | | | | | | A patch was added in kernel 5.4 to support the fiber operation of AR8033 with ramips devices. In kernel 5.18 similar enhancements were added to the kernel. Those patches are required for other fiber based devices but when added, build fails for ramips targets. This commit removes the ramips patch and adds the kernel 5.18 ones. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de> [ split commit,refresh patch and improve commit message ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.10: replace ramips AR8033 fiber patch with 5.18 patchesDaniel Kestrel2023-04-221-184/+0
| | | | | | | | | | | | A patch was added in kernel 5.4 to support the fiber operation of AR8033 with ramips devices. In kernel 5.18 similar enhancements were added to the kernel. Those patches are required for other fiber based devices but when added, build fails for ramips targets. This commit removes the ramips patch and adds the kernel 5.18 ones. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de> [ split commit, refresh patch and improve commit title ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: MSG1500 X.00: switch to mac-address-ascii dtsChukun Pan2023-04-213-17/+30
| | | | | | | | The Config partition of some machines is special, and the openwrt script cannot read the protest_lan_mac correctly. This problem can be solved by reading the mac address (ascii) in dts. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ramips: add Xiaomi RA75 red signal ledOleksandr Zharov2023-04-171-0/+11
| | | | | | | | | | | | | | | | | RA75 has 5 physical LEDs under 2 indicators, mixed with light pipes: Indicator "System": GPIO0: blue GPIO2: amber Indicator "Signal": GPIO44: blue GPIO37: amber GPIO46: red All except GPIO46 were already added by Jo Deisenhofer. GPIO46 is used for UART1 by default, so it needs additional pin control change in devicetree to be operational. Verified on my RA75. Signed-off-by: Oleksandr Zharov <alex.zeed@gmail.com>
* ramips: sercomm-payload: use pide-file argumentÁlvaro Fernández Rojas2023-04-091-1/+1
| | | | | | | Instead of passing an array of hex bytes for the Sercomm PID we can now use the --pid-file parameter. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 5.10 to 5.10.177John Audia2023-04-083-8/+8
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: lower re305-v3 spi-max-frequencyJoe Mullally2023-04-081-1/+1
| | | | | | | | | | | | | Fix flash I/O instability observed in newer devices with cFeon QH64A-104HIP (detected as en25qh64). Ref: https://forum.openwrt.org/t/support-for-tp-link-re305-v3/75893/91 Reported-by: Dimitri Souza <dimitri.souza@gmail.com> Tested-by: Dimitri Souza <dimitri.souza@gmail.com> Signed-off-by: Joe Mullally <jwmullally@gmail.com> [alter commit-message - target master] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: define remapping-range for DAP-X1860David Bauer2023-04-081-0/+7
| | | | | | | | | Prevent the BBT translation layer from remapping the UBI used for storing rootfs. Explicitly define the number of blocks reserved for remapping. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for OrayBox X1Bin We2023-04-024-0/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for OrayBox X1. It is a 802.11n router, based on MediaTek MT7628N. Specifications: SoC: MediaTek MT7628N (580MHz) RAM: 64 MiB Flash: 16 MiB NOR (Winbond W25Q128JVSIQ) Wireless: 802.11b/g/n 2x2 2.4GHz (Built In) Ethernet: 1x 100Mbps only USB: 1x USB Type-A 2.0 Host Port Button: 1x "Reset" button LED: 1x Blue LED + 1x Red LED + 1x White LED Power: 5V Micro-USB input Manufacturer Page: https://pgy.oray.com/router/x1.html/parameter Flash Layout: 0x000000000000-0x000000030000 : "u-boot" 0x000000030000-0x000000040000 : "kpanic" 0x000000040000-0x000000050000 : "factory" 0x000000050000-0x000000fe0000 : "firmware" 0x000000fe0000-0x000000ff0000 : "bdinfo" 0x000000ff0000-0x000001000000 : "reserve" Install via SSH: Original firmware is based on OpenWRT, but SSH is not start by default, You should enable it first 1. Login into web admin (10.168.1.1), default password is 'admin' 2. Open the following link, and the result should be {"code":0}; SSH is now started, username is root, password is same as web admin password http://10.168.1.1/cgi-bin/oraybox?_api=ssh_set&enabled=1 4. You can flash firmware via mtd: mtd write /tmp/firmware_image.bin firmware Signed-off-by: Bin We <me@udp.pw>
* ramips: mt7621: add migration script for WLAN PCI pathsFelix Baumann2023-04-011-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI paths of the WLAN devices have changed between kernel 5.10 and 5.15; migrate config so existing wifi-iface definitions don't break. This is implemented as a hotplug handler rather than a uci-defaults script as the migration script must run before the 10-wifi-detect hotplug handler. based on b452af23a8602ebf7bfb0eb084383ecd595face5 migration was forgotten when device trees were adjusted in 688697889c9ceb9d2d8d413d1abcc5fa7edb402b c77913be5be5f11a0f20dba1b45b96470099e8a8 fixes #9374 affected devices: Netgear R6220 Netgear WAC104 Netgear WNDR3700 v5 Zbtlink ZBT-WE1326 Wiflyer WF3526-P Arcadyan WE420223-99 Beeline Smartbox Flash (Arcadyan WG443223) MTS WG430223 (Arcadyan WG430223) Tested-by: Maximilian Baumgartner <aufhaxer@googlemail.com> Tested-by: Mikhail Zhilkin <csharper2005@gmail.com> Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* ramips: Add support for CJ-Hello HYC-G920Muhammad AL-Qadhy2023-04-012-0/+206
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hanyang Digitech Co., Ltd. MSIP-CMM-HYD-HYC-G920 CJ-Hello HYC-G920 SoC : MediaTek MT7621AT RAM : 256M (SK hynix H5TQ2G63FFR) FLASH : 16MB (Winbond W25Q128BV) WiFi : MediaTek MT7602EN bgn 2SS WiFi : MediaTek MT7612EN nac 2SS BTN : Reset LED : - Power RED - WAN Green - LAN {1-4} - WiFi 2.4 GHz Blue - WiFi 5 GHz Blue - USB Green **For MT7621 stage1 DDR Test** UART : J4 GND - 3V3 - TX - RX - GND / 57600-8N1 ``` MT7621 stage1 code 10:33:55 (ASIC) CPU=500000000 HZ BUS=166666666 HZ ``` **For u boot environment** UART : J4 GND - 3V3 - TX - RX - GND / 115200-8N1 **UART Menu** ``` Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. ``` **Steps** Press 4: Entr boot command line interface. On the pormpt enter. `setenv firmware_size 0xf60000` Then enter. `saveenv` Then enter. `reset` **Device will reboot** Set your IP 192.168.100.100/24 Connect your lan cable to wan port. **On the UART Menu** Press 2: Load system code then write to Flash via TFTP. Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N) **enter** `Y` Please Input new ones /or Ctrl-C to discard Input device IP (192.168.100.55) ==:`192.168.100.55` Input server IP (192.168.100.100) ==:`192.168.100.100` Input Linux Kernel filename () ==:`openwrt-22.03.0-ramips-mt7621-hanyang_hyc-g920-squashfs-sysupgrade.bin` After uploading firmware image, device will boot Openwrt. Signed-off-by: Muhammad AL-Qadhy <m.ismael@gmail.com>
* ramips: mt7621: remove set-affinity scriptRosen Penev2023-04-011-19/+0
| | | | | | | | | | | | From https://github.com/openwrt/openwrt/pull/12280#issuecomment-1489279860 On Ethernet and WLAN, NAPI is threaded for all queues. This means that the processing work is not stuck on the CPU that fired the IRQ. Under heavy load, IRQs get disabled anyway, so it should not matter at all which CPUs the IRQs fire on. Basic testing indicates this to be true. There's no speedup or slowdown. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: mt7621: ASUS RT-AX53U add NMBM, nest firmwareFelix Baumann2023-04-011-7/+26
| | | | | | | | | | | | Nests kernel and ubi into firmware partition in-order to be compatible with OEM firmware. This allows restoring oem firmware from a backup of firmware2. Add jffs2 partition which is present in the oem firmware. Add support for mediatek NMBM (wear leveling on newer mediatek devices). Exclude UBI partition from NMBM management. Continues PR #10685. Tested-by: Felix Baumann <felix.bau@gmx.de> Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* kernel: bump 5.15 to 5.15.105John Audia2023-04-013-8/+8
| | | | | | | | | | | | | | | | | | | Manually rebased: Removed upstreamed: backport-5.15/743-v6.3-0005-net-dsa-b53-mmap-fix-device-tree-support.patch[1] backport-5.15/743-v6.3-0006-net-dsa-tag_brcm-legacy-fix-daisy-chained-switches.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.105&id=9bbb3d3f218f1cf51f57a43cf8fd63b05be1b821 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.105&id=48f52431af9980582b6faa32ff8b581edb10486c Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: Refresh patchesHauke Mehrtens2023-03-291-2/+2
| | | | | | | Refresh the ramips kernel patches. Fixes: 7472476aef26 ("kernel: fix mtk_eth_soc throughput regressions on gigabit PHY ports") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* generic: mtk_eth_soc: switch to external PCS driverDaniel Golle2023-03-271-2/+2
| | | | | | Backport patch to make use of the new PCS driver in mtk_eth_soc. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: backport some phylink helper functionsDaniel Golle2023-03-271-1/+1
| | | | | | | | | | | | | | It isn't feasible to literally backport all upstream phylink_pcs changes down to Linux 5.15: It's just too many patches, and many downstream drivers and hacks are likely to break. We are too close to branching off to risk this, and it's also just too much work. Instead just add helper functions used by modern PCS drivers while keeping the original functions instact as well. While this may add a kilobyte or two of extra kernel size, it has the advantage that we get the best of both worlds: None of the existing codepaths are touched, but yet we have the option to backport singular improvements to Ethernet drivers where needed. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: add support for Keenetic Lite III rev. AAlexey Bartenev2023-03-274-0/+163
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | General specification: SoC Type: MediaTek MT7620N (580MHz) ROM: 8 MB SPI-NOR (W25Q64FV) RAM: 64 MB DDR (EM6AB160TSD-5G) Switch: MediaTek MT7530 Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4) Wireless: 2.4 GHz (MediaTek RT5390): b/g/n Buttons: 3 button (POWER, RESET, WPS) Slide switch: 4 position (BASE, ADAPTER, BOOSTER, ACCESS POINT) Bootloader: U-Boot 1.1.3 Power: 9 VDC, 0.6 A MAC in stock: |- + | | LAN | RF-EEPROM + 0x04 | | WLAN | RF-EEPROM + 0x04 | | WAN | RF-EEPROM + 0x28 | OEM easy installation 1. Use a PC to browse to http://my.keenetic.net. 2. Go to the System section and open the Files tab. 3. Under the Files tab, there will be a list of system files. Click on the Firmware file. 4. When a modal window appears, click on the Choose File button and upload the firmware image. 5. Wait for the router to flash and reboot. OEM installation using the TFTP method 1. Download the latest firmware image and rename it to klite3_recovery.bin. 2. Set up a Tftp server on a PC (e.g. Tftpd32) and place the firmware image to the root directory of the server. 3. Power off the router and use a twisted pair cable to connect the PC to any of the router's LAN ports. 4. Configure the network adapter of the PC to use IP address 192.168.1.2 and subnet mask 255.255.255.0. 5. Power up the router while holding the reset button pressed. 6. Wait approximately for 5 seconds and then release the reset button. 7. The router should download the firmware via TFTP and complete flashing in a few minutes. After flashing is complete, use the PC to browse to http://192.168.1.1 or ssh to proceed with the configuration. Signed-off-by: Alexey Bartenev <41exey@proton.me>
* ramips: mt7621: enable unused PCIe port to fix potential boot failureShiji Yang2023-03-264-16/+0
| | | | | | | | | | | | | One user reported that his SIMAX1800T couldn't boot like the others. After debugging, I found that this was caused by the disabled PCIe port. I cannot reproduce this issue on my SIMAX1800T. But when I disabled pcie2 on the ASUS RT-AC57U, I got the same result. It seems that disabling these unused PCIe ports on some mt7621 revisions will cause PCIe to fail to initialize. So we'd better to re-enable them on all related mt7621 devices. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix 5g mac for TOTOLINK X5000RChuanhong Guo2023-03-261-0/+4
| | | | | | | | | There's no valid mac address for the second band in the eeprom. The vendor fw uses 2.4G mac + 4 as the mac for 5G radio. Do the same in our firmware. Fixes: 23be410b3d ("ramips: add support for TOTOLINK X5000R") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: bump 5.15 to 5.15.103John Audia2023-03-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: backport-5.15/704-15-v5.19-net-mtk_eth_soc-move-MAC_MCR-setting-to-mac_finish.patch Removed upstreamed: backport-5.15/060-v6.0-01-tools-build-Add-feature-test-for-init_disassemble_in.patch[1] backport-5.15/060-v6.0-02-tools-include-add-dis-asm-compat.h-to-handle-version.patch[2] backport-5.15/060-v6.0-03-tools-perf-Fix-compilation-error-with-new-binutils.patch[3] backport-5.15/060-v6.0-04-tools-bpf_jit_disasm-Fix-compilation-error-with-new-.patch[4] backport-5.15/060-v6.0-05-tools-bpftool-Fix-compilation-error-with-new-binutil.patch[5] pending-5.15/733-02-net-ethernet-mtk_eth_soc-fix-RX-data-corruption-issu.patch[6] bcm47xx/patches-5.15/170-bgmac-fix-initial-chip-reset-to-support-BCM5358.patch[7] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=51b99dc38c1a053e2e732d7f9e2740e343ae7eae 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=451c9d7b16169645ed291ebb2ca9844caa088f2d 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=97f005c0bdbaf656a7808586d234965385a06c58 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=1c27fab243333821375e4d63128d60093fdbe149 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=4441a90091931fd81607567961dc122f24f735bb 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=2adc29350a5b4669544566f71f208d2abaec60ab 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=04bfc5bcdfc0fdb73587487c71b04d63807ae15a Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: add support for Mercusys MR70XDavid Bauer2023-03-243-4/+183
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware ======== - SoC: MediaTek MT7621AT (880MHz, Duel-Core) - RAM: DDR3 128MB - Flash: Winbond W25Q128JV (SPI-NOR 16MB) - WiFi: MediaTek MT7915D (2.4GHz, 5GHz, DBDC) - Ethernet: MediaTek MT7530 (WAN x1, LAN x3, SoC) - UART: >TX RX GND 3v3 (115200 8N1, J1) Do not connect 3v3. TX is marked with an arrow. Installation ============ Flash factory image. This can be done using stock web ui. Revert to stock firmware ======================== Flash stock firmware via OEM Web UI Recovery mode. Web UI Recovery method ====================== 1. Unplug the router 2. Plug in and hold reset button 5~10 secs 3. Set your computer IP address manually to 192.168.1.x / 255.255.255.0 4. Flash image with web browser to 192.168.1.1 Co-authored-by: Robert Senderek <robert.senderek@10g.pl> Co-authored-by: Yoonji Park <koreapyj@dcmys.kr> Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: mt7621: enable lzma-loader for AFOUNDRY EW1200Tony Butler2023-03-221-0/+1
| | | | | | | | | Fixes boot loader LZMA decompression issues (LZMA ERROR 1) As reported in issue #12208 Reported-by: Raúl M. <raul.m@sparkedhost.com> Tested-by: Raúl M. <raul.m@sparkedhost.com> Signed-off-by: Tony Butler <spudz76@gmail.com>
* ramips: fix Archer AX23 WiFi MAC address conflictDavid Bauer2023-03-211-4/+1
| | | | | | | | | | The original claim about conflicting MAC addresses is wrong. mac80211 does increment the first octet and sets the LA bit. This means our "workaround" actually leads to the issue while incrementing the last octet is safe. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: cudy wr1300v2 reduce SPI freq to 40000000Óscar García Amor2023-03-201-2/+1
| | | | | | | | | Cases have been reported in which certain devices do not boot correctly or have errors. After various tests by users who have such errors it has been concluded that the SPI frequency should be reduced to 40Mhz, at this speed it appears that all devices work correctly. Signed-off-by: Óscar García Amor <ogarcia@connectical.com>
* kernel: bump 5.10 to 5.10.175John Audia2023-03-201-2/+2
| | | | | | | | | | | | | | Manually rebased: backport-5.10/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch Removed upstreamed: bcm47xx/patches-5.10/170-bgmac-fix-initial-chip-reset-to-support-BCM5358.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.175&id=cbf11ff3708ff163387da924f80a47ce7c721e9b Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.173John Audia2023-03-202-11/+10
| | | | | | | | | Manually rebased: ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.100John Audia2023-03-182-13/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.15/950-0421-Support-RPi-DPI-interface-in-mode6-for-18-bit-color.patch bcm27xx/patches-5.15/950-0706-media-i2c-imx219-Scale-the-pixel-clock-rate-for-the-.patch ramips/patches-5.15/810-uvc-add-iPassion-iP2970-support.patch Removed upstreamed: bcm27xx/patches-5.15/950-0707-drm-vc4-For-DPI-MEDIA_BUS_FMT_RGB565_1X16-is-mode-1-.patch[1] bcm27xx/patches-5.15/950-0596-drm-vc4-dpi-Add-option-for-inverting-pixel-clock-and.patch[2] ipq807x/0006-v5.16-arm64-dts-qcom-Fix-IPQ8074-PCIe-PHY-nodes.patch [3] ipq807x/0034-v6.1-arm64-dts-qcom-ipq8074-fix-PCIe-PHY-serdes-size.patch [4] ipq807x/0103-arm64-dts-qcom-ipq8074-fix-Gen2-PCIe-QMP-PHY.patch [5] ipq807x/0104-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-QMP-PHY.patch [6] ipq807x/0105-arm64-dts-qcom-ipq8074-correct-Gen2-PCIe-ranges.patch [7] ipq807x/0108-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-node.patch [8] ipq807x/0109-arm64-dts-qcom-ipq8074-correct-PCIe-QMP-PHY-output-c.patch [9] ipq807x/0132-arm64-dts-qcom-ipq8074-correct-USB3-QMP-PHY-s-clock-.patch [10] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.99&id=d2991e6b30020e286f2dd9d3b4f43548c547caa6 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/gpu/drm/vc4/vc4_dpi.c?h=v5.15.100&id=8e04aaffb6de5f1ae61de7b671c1531172ccf429 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=a55a645aa303a3f7ec37db69822d5420657626da 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=d9df682bcea57fa25f37bbf17eae56fa05662635 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=7e6eeb5fb3aa9e5feffdb6e137dcc06f5f6410e1 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=e88204931d9a60634cd50bbc679f045439c4b91d 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=1563af0f28afd3b6d64ac79a2aecced3969c90bf 8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=feb8c71f015d416f1afe90e1f62cf51e47376c67 9. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=69c7a270357a7d50ffd3471b14c60250041200e3 10. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=dd3d021ae5471d98adf81f1e897431c8657d0a18 Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3 Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> Tested-by: Robert Marko <robimarko@gmail.com> #ipq807x/Dynalink WRX36 Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x/ax3600, x86_64/FW-7543B, ath79/tl-wdr3600, ipq806x/g10, ipq806x/nbg6817
* uencrypt: add support for mbedtlsEneas U de Queiroz2023-03-171-2/+2
| | | | | | | | | | | | | | This commit includes some additional changes: - better handling of iv and keys in openssl/wolfssl variants - fix compiler warnings and whitespace - build all 3 variants as separate packages - adjust the new package name in targets' DEVICE_PACKAGES - remove PKG_FLAGS:=nonshared [Beeline SmartBox Flash - OK] Tested-by: Mikhail Zhilkin <csharper2005@gmail.com> [after test: replaced a hardcoded IV size of 16 by cipher_info->iv_size] Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* ramips: add support for TP-Link Archer AX23 v1David Bauer2023-03-154-0/+223
| | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: MediaTek MT7621 DAT RAM: 128MB DDR3 (integrated) FLASH: 16MB SPI-NOR () WiFi: MediaTek MT7905 + MT7975 (2.4 / 5 DBDC) 802.11ax SERIAL: 115200 8N1 LEDs - (3V3 - GND - RX - TX) - ETH ports Installation ------------ Upload the factory image using the Web-UI. Web-Recovery ------------ The router supports a HTTP recovery mode by holding the reset-button when powering on. The interface is reachable at 192.168.0.1 and supports installation using the factory image. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for SNR-CPE-ME2-SFPAleksey Nasibulin2023-03-083-0/+235
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SNR-CPE-ME2-SFP is a wireless router with SFP cage manufactured by SNR/NAG company. Specification: - SoC: MediaTek MT7621A - CPU: 880MHz - Flash: 16 MB (GD25Q127CSIG) - RAM: 256 MB - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7615DN) - Ethernet: 4x 10/100/1000 Mbps - SFP cage (using RTL8211FS-CG) - USB 3.0 port - Power: 12 VDC, 2 A Flash instruction via TFTP: 1. Boot SNR-CPE-ME2 to recovery mode (press reset button and power on device, hold button for ~10 seconds) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing 4. Do sysupgrade using web-interface MAC Addresses(stock) -------------------- +----------+------------------+-------------------+ | use | address | example | +----------+------------------+-------------------+ | Device | label | 6A:C4:DD:xx:xx:28 | | Ethernet | + 1 | 6A:C4:DD:xx:xx:29 | | 2g | + 2 | 6A:C4:DD:xx:xx:2A | | 5g | + 3 | 6A:C4:DD:xx:xx:2B | +----------+------------------+-------------------+ Notes: - Reading sfp eeprom is not supported [1] (driver issue). Stock image has the same situation. References: 1. https://forum.openwrt.org/t/mt7621-and-reading-sfp-eeprom/152249 Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
* ramips: mt7621: TP-Link EAP235/615-Wall: add poe passthrough gpio definitionsAndré Fonseca2023-03-041-0/+4
| | | | | | | | | Add the missing definitions for the PoE passthrough functionality. The relevant pin is already being exported, but it is missing from the initial board configuration file. With this change, the user is now able to toggle the PoE passthorough functionality via the uci cli Signed-off-by: André Fonseca <mail@andrefonseca.pt>
* ramips: fix wrong pcie port number for Arcadyan WE420223-99Mikhail Zhilkin2023-03-041-1/+1
| | | | | | | | | | | | | Wrong pcie port number for WLAN causes missing 5g WLAN interface with 5.15 kernel on Arcadyan WE420223-99 (KPN Experia WiFi). This changes port from pcie0 to pcie1. [1.331556] mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & CLK) [1.345299] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [1.359116] mt7621-pci 1e140000.pcie: PCIE1 enabled Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: add support for D-Link Dir-853 A1Hang Zhou2023-03-044-0/+232
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * SoC: MT7621AT * RAM: 256MB (NT5CC64M16GP-DI) * Flash: 16MB NOR SPI flash (GD25Q127CSIG, using GD25Q128C driver) * WiFi: MT7615DN (2.4GHz+5Ghz) with DBDC * Ethernet: 4x1000M LAN, 1x 1000M WAN * LEDs: Power Blue+Orange,Wan Blue+Orange,WPS Blue,"2.4G"Blue, "5G" Blue, USB Blue * Buttons: Reset,WPS, Wifi * Serial interface: on board but not populated, pinout (from the DC jack side to the WAN port side) is "3.3V Input Output Gnd". Baud rate is 57600, settings are 8 data bits, no parity bit, one stop bit, and no flow control. Stock flash layout: ``` GD25Q128C(c8 40180000) (16384 Kbytes) mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 Creating 7 MTD partitions on "raspi": 0x000000000000-0x000001000000 : "ALL" 0x000000000000-0x000000030000 : "Bootloader" 0x000000030000-0x000000040000 : "Config" 0x000000040000-0x000000050000 : "Factory" 0x000000050000-0x000000060000 : "Config2" 0x000000060000-0x000000fb0000 : "Kernel" 0x000000fb0000-0x000001000000 : "Private" ``` The kernel partition will be replaced with the OpenWrt image, the other partitions are left untouched. "Config2" seems to be the config storage used by the stock firmware. "Private" is a 320kB empty JFFS2 partition that comes with the stock firmware. One can get a larger space for OpenWrt by merging it with "Kernel". OpenWrt flash layout: ``` 0x000000000000-0x000000030000 : "u-boot" 0x000000030000-0x000000040000 : "u-boot-env" 0x000000040000-0x000000050000 : "factory" 0x000000050000-0x000000060000 : "config2_stock" 0x000000060000-0x000000fb0000 : "firmware" 0x000000fb0000-0x000001000000 : "private_stock" ``` The OpenWrt image must have 96 bytes of padding in the header. MAC addresses on OEM firmware: | | location on the flash | notes | |------ |----------------------- |---------- | | lan (eth2) | factory + 0xe000 | on label | | wan (eth3) | factory + 0xe006 | | | 2.4g (rax0) | not on flash | lan + 1 | | 5g (ra0) | not on flash | lan + 2 | Mac addresses of the 2.4g and 5g interface are stored as ASCII strings in the u-boot-env partition, but they are not used. OpenWrt calculates Wifi Mac addresses based on the LAN Mac. Flash and test instructions: Flash the encrypted image (available in the OpenWrt forum) through the stock D-Dink web interface. 1. Open the case, and solder the 4-pin header near the WAN port. 2. Connect it to a USB-UART TTL (3.3V) adapter, no need to connect VCC. 3. Open a terminal emulator (e.g. `screen /dev/ttyUSB0` on linux) with the settings mentioned above. 4. Setup a TFTP server on your PC that can serve `xxx-ramips-mt7621-dlink_dir-853-a1-initramfs-kernel.bin`. 5. Connect any LAN port to your PC and set a static IPv4 address to 192.168.0.101 (netmask 255.255.255.0). 6. Power on the device and keeps pressing 1 until you see the prompt. 7. Use default IP addresses and enter the file name accordingly, then hit enter. 8. Wait until it boots to OpenWrt, the default IP address is 192.168.1.1, you need to change your PC network adapter to use DHCP in order to access LUCI. 9. So far, the OpenWrt runs in RAM and the flash contents are not touched. You can try OpenWrt without having to overwrite the stock firmware, a reboot clears all changes. 10. Optionally, backup the stock firmware (the "firmware" partition) in Luci. 11. To permantly install OpenWrt to the device , click on "System -> Backup/Flash Firmware" in Luci and flash `xxx-ramips-mt7621-dlink_dir-853-a1-squashfs-sysupgrade.bin` Known problems: * WLAN0 defaults to 5G after a fresh installation, to enable 2.4G network, you need to config it manually in LUCI. * If you see jffs2 related warnings/errors after updating from the stock web interface, you need to do a reset in LUCI. The error will be gone after a cold reboot. Signed-off-by: Hang Zhou <929513338qq@gmail.com>
* mt7621: move uboot-envtools to DEFAULT_PACKAGESBjørn Mork2023-03-012-178/+194
| | | | | | | | | Several devices depend on fw_printenv during sysupgrade. Make sure it always is present in all images, including initramfs images built by the buildbots. Fixes: 2449a632084b ("ramips: mt7621: Add support for ZyXEL NR7101") Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ramips: rt5350: enable lzma-loader for ALLNET ALL5003Sergio Paracuellos2023-03-011-0/+1
| | | | | | | Fixes the boot loader LZMA decompression issue: LZMA ERROR 1 - must RESET board to recover Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
* treewide: remove label = "cpu" from DSA dt-bindingArınç ÜNAL2023-02-261-1/+0
| | | | | | | This is not used by the DSA dt-binding, so remove it from all devicetrees. Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9cc115d8d6f73dd260de1609182f3645844d6907 Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* ramips: Alternative name Asus RT-AC750L for Asus RT-AC1200V2Karl Chan2023-02-261-0/+2
| | | | | | | | The Asus RT-AC750L is identical to the already supported Asus RT-AC1200V2. Use the ALT0 buildroot tags to show both devices. Reference : https://forum.openwrt.org/t/asus-rt-ac750l-is-the-same-as-rt-ac1200-v2/151783 Signed-off-by: Karl Chan <exkc@exkc.moe>
* ramips: correct the PCIe port number for some mt7621 devicesFelix Baumann2023-02-252-2/+2
| | | | | | | | | | | | | | | | | | | | MT7621 uses a new PCIe driver in the 5.15+ kernel. Allocating wrong PCIe port will cause the PCIe NIC to not work properly. This commit fixes the wrong port numbers on Netgear R6220, WAC104 and WNDR3700 v5. According to bootlog, MT7612E (5GHz) is connected to pcie0, and MT7603E (2GHz) is connected to pcie2: [2.758986] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) [2.772862] mt7621-pci 1e140000.pcie: PCIE0 enabled [2.782579] mt7621-pci 1e140000.pcie: PCIE2 enabled ... [3.009151] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000 [3.125715] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000 Tested-by: Maximilian Baumgartner <aufhaxer@googlemail.com> Signed-off-by: Shiji Yang <yangshiji66@qq.com> [felix.bau@gmx.de: adjust commit message for Netgear devices] Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* ramips: add alternative device name for Wiflyer WF3526-PShiji Yang2023-02-191-0/+2
| | | | | | | | | Wiflyer WF3526-P and Zbtlink ZBT-WE1326 have the same circuit design. Installing the misunderstading firmware of ZBT-WE3526 will cause Wi-Fi not work due to allocate the wrong pcie port. Add alternative name to help users easily build or download the correct firmware. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: correct the PCIe port number for Zbtlink ZBT-WE1326Shiji Yang2023-02-191-2/+2
| | | | | | | | | | | | | | | | | MT7621 gets a new PCIe driver in the 5.15+ kernel. Allocating wrong PCIe port will cause the PCIe NIC to not work properly. This commit fixes the wrong port numbers on Zbtlink ZBT-WE1326. According to the bootlog, MT7612E (5 GHz) is connected to pcie1, and MT7603E (2 GHz) is connected to pcie2: [4.197658] mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & CLK) [4.204609] mt7621-pci 1e140000.pcie: PCIE1 enabled [4.209476] mt7621-pci 1e140000.pcie: PCIE2 enabled ... [4.307988] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000 [4.367206] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add support for Huasifei WS1208V2Arınç ÜNAL2023-02-183-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The Huasifei WS1208V2 is an AC1200 router featuring 5 Ethernet ports with a Quectel RM520N-GL cellular modem which supports QMI and MBIM modes. Specifications: - MT7621AT, 256 MiB RAM, 16 MiB SPI Flash - MT7603EN 2.4 GHz & MT7612EN 5 GHz WLAN - Quectel RM520N-GL Cellular Modem - 2 WLAN & 4 Cellular Antennas - 5 Gigabit Ethernet Ports - 1 USB 2.0 port - 1 PCI-E Slot - 1 M.2 slot - 1 SIM card slot - 1 SD card slot Installation: - Install sysupgrade image via ROOter OS. TFTP Recovery: - Connect to serial console. - Boot initramfs image by choosing option 1 when U-Boot prompts. - Install sysupgrade image via OpenWrt. Link: https://www.huasifei.com/a/Products/5G%20CPE/240.html Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* ramips: add label MAC address for EPG600 and ESR600Michael Pratt2023-02-181-0/+1
| | | | | | | set label mac for the current ESR600 and new EPG600 using the board.d scripts Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ramips: add support for Senao Engenius EPG600Michael Pratt2023-02-183-0/+245
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCC ID: A8J-EPG600 Engenius EPG600 is an indoor wireless router with 1 Gb ethernet switch, dual-band wireless, internal antenna plates, USB, and phone lines (not supported) this board is a Senao device: the hardware is equivalent to EnGenius ESR600 (except for phone lines) the software is Senao SDK which is based on openwrt and uboot which uses the legacy Senao header with Vendor / Product IDs to verify the firmware upgrade image. **Specification:** - MT7620 SOC MIPS 24kec, 2.4 GHz WMAC, 2x2 - RT5592N WLAN PCI chip, 5 GHz, 2x2 - QCA8337N Gb SW RGMII GbE, SW P0 -- SOC P5, 5 LEDs - 40 MHz clock - 16 MB FLASH MX25L12845EMI-10G - 64 MB RAM NT5TU32M16 - UART console J2, populated - USB 2.0 port direct to SOC - 6 GPIO LEDs power, 2G, 5G, wps2g, wps5g, line - 3 buttons reset, wps, "reg" (registeration) - 4 antennas internal omni-directional plates NOT YET SUPPORTED: VoIP - Si3050-FT + Si3019-FT Voice DAA, SPI control, PCM data - Phone Ports "TEL", "LINE" RJ11, 4P2C (2 pins) **MAC addresses:** MAC address labeled as MAC ADDRESS MACs present in both wifi cal data and uboot environment eth0.1/phy1 ---- *:82 rf 0x4 phy0 ---- *:83 factory 0x4 eth0.2 MAC *:b8 "wanaddr" **Installation:** Method 1: Firmware upgrade page: (if you cannot access the APs webpage) factory reset with the reset button connect ethernet to a computer OEM webpage at 192.168.0.1 username and password 'admin' Navigate to gear icon, "Device Management", "Tools" select the factory.dlf image Upload and verify checksum Method 2: Serial to upload initramfs: Follow directions for TFTP recovery upload and boot initramfs and do a sysupgrade **TFTP recovery:** Requires UART serial console, reset button does nothing rename initramfs-kernel.bin to 'uImageEPG600' make available on TFTP server at 192.168.99.8 power board, interrupt boot with "4" execute `tftpboot` and `bootm` (with the load address) **Return to OEM:** Images from OEM are provided, but not compatible with openwrt sysupgrade. So it must be modified. Alternatively, back up all mtd partitions before flashing **Note on switch registers:** The necessary registers needed for the QCA8337 switch can be read from interrupted boot (tftpboot, bootm) by using the following lines in the switch driver ar8327.c in the function 'ar8327_hw_config_of' where 'qca,ar8327-initvals' is parsed from DTS before the new register values are written: pr_info("0x04 %08x\n", ar8xxx_read(priv, AR8327_REG_PAD0_MODE)); pr_info("0x08 %08x\n", ar8xxx_read(priv, AR8327_REG_PAD5_MODE)); pr_info("0x0c %08x\n", ar8xxx_read(priv, AR8327_REG_PAD6_MODE)); pr_info("0x10 %08x\n", ar8xxx_read(priv, AR8327_REG_POWER_ON_STRAP)); Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ramips: mt7620: split gsw hw_init to mac_init, ephy_initMichael Pratt2023-02-181-16/+24
| | | | | | | | | | | | | | | | | | | in order for the option ephy-disable to work without also needing ephy-base option, we have to skip all the lines that write to mdio addresses that assume those addresses do not have an external switch. Otherwise, ephy ports will be disabled in hardware, but register writes still happen as if they are enabled. Split the functions so that other things are done first, and ephy port setup can be skipped with a simple "return". Tested on Engenius EPG600 (MT7620A ver:2 eco:3) with QCA8337 external switch Ref: cc6fd6fbb505 ("ramips: mt7620: add ephy-disable option to switch driver") Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ramips: fix the name of ASUS AX54 because it has dupilcated twiceKarl Chan2023-02-181-5/+3
| | | | | | The name of ASUS AX54 has dupilcated in the DEVICE_ALT0_VENDOR/DEVICE_ALT0_MODEL Signed-off-by: Karl Chan <exkc@exkc.moe>
* ramips: backport mt7621 PCIs initialization delay patchShiji Yang2023-02-182-0/+104
| | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need to delay phy port initialization after calling the mt7621_pcie_init_port() driver function to get into reliable boots for both warm and hard resets. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: Switch default kernel to 5.15Rodrigo B. de Sousa Martins2023-02-171-2/+1
| | | | | | | | | | | | | I tested kernel 5.15 on my device for several times without any problems. In my tests, 5.15 kernel has performance improvements such MGLRU. Finally, initial kernel 6.1 support is imminent. All ramips subtargets have 5.15 as testing kernel. So, it's time to change. Tested on my Archer C6 v3.2 (mt7621) Signed-off-by: Rodrigo B. de Sousa Martins <rodrigo.sousa.577@gmail.com> [reformat commit subject and message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: fix wrong pcie port number for Arcadyan devicesMikhail Zhilkin2023-02-171-1/+1
| | | | | | | | | | | Wrong pcie port number for WLAN causes missing 5g WLAN interface with 5.15 kernel. This changes port from pcie0 to pcie1 in dtsi. [1.166330] mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & CLK) [1.180073] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [1.193889] mt7621-pci 1e140000.pcie: PCIE1 enabled Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-26 16:05:49 +0000