aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
Commit message (Collapse)AuthorAgeFilesLines
* ramips: fix path for dma-ralink and mtk-hsdmaChuanhong Guo2020-04-051-2/+4
| | | | | | | These two drivers were available in drivers/staging in 5.4. Fix driver paths for them. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: bringup dsa master on preinitChuanhong Guo2020-04-041-0/+22
| | | | | | | | DSA requires master netdev to be up before any of its slave ports. Bring it up during preinit so that the first lan port can be used on failsafe. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: disable image for mikrotik_rbm11gChuanhong Guo2020-04-041-0/+1
| | | | | | | It's unknown which switch port is used on mikrotik_rbm11g. Disable this image until someone with actual device fixes this problem. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: remove set_preinit_iface scriptChuanhong Guo2020-04-041-59/+0
| | | | | | | | | | This script isn't suitable for mt7621 anymore due to switching to DSA and it needs a different preinit script. Generic preinit logic in package/base-files has the ability to parse board.json and pick preinit iface accordingly. Just remove this script instead of moving it into subtargets. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: correct MTC WR1201 LAN ports namesRené van Dorst2020-04-041-4/+4
| | | | | | | LAN ports of MTC WR1201 are reversed, so correct their names Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: add new NAND driverDENG Qingfang2020-04-044-2/+1496
| | | | | | Add new NAND driver for MT7621 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: drop obsolete mx25l25635f dts hackDENG Qingfang2020-04-042-2/+2
| | | | | | 5.4 kernel has fixed this issue, so the hack is no longer needed. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* Revert "ramips: mt7621: disable images for gehua_ghl-r-001"DENG Qingfang2020-04-041-1/+0
| | | | | | | This reverts commit 28080d54d217fb4ab112e079f69462fee695dbf8. Support for MX25L25635F flash is fixed upstream Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: move swconfig to subtargets except for MT7621DENG Qingfang2020-04-046-7/+6
| | | | | | | As MT7621 does not use swconfig anymore, move the package swconfig to other subtargets. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: introduce 'soc_device' initializationDENG Qingfang2020-04-041-0/+89
| | | | | | | | | | | | | | | mt7621 SoC has its own 'ralink_soc_info' structure with some information about the soc itself. Pcie controller and pcie phy drivers for this soc which are still in staging git tree make uses of 'soc_device_attribute' looking for revision 'E2' in order to know if reset lines are or not inverted. This way of doing things seems to be necessary in order to make things clean and properly. Hence, introduce this 'soc_device' to be able to properly use those attributes in drivers. Also set 'data' pointer points to the struct 'ralink_soc_info' to be able to export also current soc information using this mechanism. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: fix MikroTik 750Gr3 LAN ports namesDENG Qingfang2020-04-042-4/+7
| | | | | | They are labeled as LAN2..LAN5 instead of LAN1..LAN4 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: use SoC I2C instead of bitbanged for Ubiquiti ER-X-SFPDENG Qingfang2020-04-043-13/+8
| | | | | | | The original idea of bitbanged I2C is to use i2c-gpio-custom Since i2c-gpio-custom is no longer available on 5.4, use SoC I2C instead Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: fix Ubiquiti ER-X ports names and MAC addressesDENG Qingfang2020-04-042-7/+18
| | | | | | | | | | | | | | | | | The name of each user port should be eth0..4, instead of lan1..4 and there is no WAN port. Rename them to match the official firmware. To avoid conflict with the master port (gmac0), rename it to "dsa". The official firmware assigns MAC address in this way: eth0 = label mac eth1 = label mac + 1 ... eth4 = label mac + 4 Since we have switched to DSA, it's possible to use different MAC for each port. Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: net-label supportDENG Qingfang2020-04-041-0/+34
| | | | | | Add support for renaming ethernet interfaces in DTS Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: switch kernel version to 5.4DENG Qingfang2020-04-041-0/+2
| | | | | | | After all dts and config changes, 4.14 no longer works on mt7621. Switch it to 5.4 directly. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: change default ramips_setup_interfaces configurationDENG Qingfang2020-04-041-63/+1
| | | | | | | Most of MT7621 boards have LAN1~4 and WAN, so make this as the default Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621 remove unused pinctrl groups in dtsDENG Qingfang2020-04-0412-12/+12
| | | | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [split commit, remove leftover uart3->gpio setup] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: update dts/defconfig for DSADENG Qingfang2020-04-0470-317/+1888
| | | | | | | | | | | update dts and network/LED configuration for DSA driver. sysupgrade from images prior to this commit with config preserved will cause broken ethernet setup. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> Acked-by: Jo-Philipp Wich <jo@mein.io> [split commit] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: backport GPIO driver fixDENG Qingfang2020-04-042-0/+118
| | | | | | Backport 2 patches from linux-next to fix mt7621 GPIO driver Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: update PCIe node in dtsiDENG Qingfang2020-04-041-14/+29
| | | | | | Update PCIe node in dtsi to match the new driver Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: backport PCIe driver fixes from staging-testDENG Qingfang2020-04-0420-0/+1730
| | | | | | Backport mt7621-pci/mt7621-pci-phy fixes from staging-test Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: update pinctrl nodesDENG Qingfang2020-04-0466-156/+156
| | | | | | Upstream GPIO driver uses "groups" "function" properties Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: convert GPIO dts refsDENG Qingfang2020-04-0470-374/+374
| | | | | | | The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: replace gpio/eth nodes in mt7621.dtsiDENG Qingfang2020-04-041-42/+94
| | | | | | | There's different gpio and ethernet drivers upstream for mt7621. Update these two nodes to match upstream dt bindings. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: refresh kernel configDENG Qingfang2020-04-041-52/+68
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: refresh patchesDENG Qingfang2020-04-0444-9770/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed/solved elsewhere upstream: - 0001-MIPS-ralink-Add-rt3352-SPI_CS1-pinmux.patch - 0002-MIPS-pci-rt2880-set-pci-controller-of_node.patch - 0004-MIPS-ralink-add-MT7621-pcie-driver.patch - 0009-PCI-MIPS-enable-PCIe-on-MT7688.patch - 0025-pinctrl-ralink-add-pinctrl-driver.patch - 0028-GPIO-ralink-add-mt7621-gpio-controller.patch - 0043-spi-add-mt7621-support.patch - 0045-i2c-add-mt7621-driver.patch - 0047-DMA-ralink-add-rt2880-dma-engine.patch - 0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch - 0054-mtd-spi-nor-w25q256-respect-default-mode.patch - 0099-pci-mt7620.patch - 304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch Removed because of the new NAND driver: - 0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch - 0039-mtd-add-mt7621-nand-support.patch - 0040-nand-hack.patch Remove patch that no longer applies (needs rework): - 0034-NET-multi-phy-support.patch Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mtk-mmc: set correct DMA maskDENG Qingfang2020-04-041-1/+1
| | | | | | | | | | | Since commit f8c55dc ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") changed MIPS dma handling, the mmc driver fails because it doesn't have a dma mask is set. So set the correct dma mask. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: move MTK MMC driver to files directoryDENG Qingfang2020-04-047-0/+0
| | | | | | | Move MTK MMC driver from "files-4.14" to "files" so kernel 5.4 can use it Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: copy patches and kernel config to 5.4DENG Qingfang2020-04-0450-0/+14495
| | | | | | Copy patches and kernel config to 5.4 for ramips Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: Deactivate NETGEAR WNCE2001 by defaultHauke Mehrtens2020-03-291-0/+1
| | | | | | | | | The root file system is getting too big for this device and this breaks the ramips/rt305x build. Do not build images for this board by default to fix this problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: omit IMAGE_SIZE argument from check-sizeSungbo Eo2020-03-218-74/+74
| | | | | | | | | Now that check-size uses IMAGE_SIZE by default, we can skip the argument from image recipes to reduce redundancy. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: gather DEVICE_VARS into one placeSungbo Eo2020-03-211-2/+1
| | | | | | | | | | | Place DEVICE_VARS assignments at the top of the file or above Device/Default to make them easier to find. For ramips, remove redundant values already present in parent file. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: do not add metadata to factory imagesMathias Kresin2020-03-171-2/+2
| | | | | | | The image metadata are openwrt specific and not required for factory images. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: remove maintainer variable from targetsPetr Štetiar2020-03-161-1/+0
| | | | | | | | | | | | | There is no such role as target maintainer anymore, one should always send corresponding changes for the review and anyone from the commiters is allowed to merge them or eventually use the hand break and NACK them. Lets make it clear, that it is solely a community doing the maintenance tasks. Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel: make kmod-i2c-core selected by dependent modulesSungbo Eo2020-03-132-12/+12
| | | | | | | | | | | | | | | | | | Currently kmod-i2c-* will not get into images unless kmod-i2c-core is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-hwmon-lm75 - kmod-i2c-gpio - kmod-i2c-gpio-custom - kmod-i2c-mux - kmod-i2c-ralink Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for TOTOLINK A3Sungbo Eo2020-03-133-2/+49
| | | | | | | | | | | | | | | | | | | | | | | | | TOTOLINK A3 is a clone of ipTIME A3. The only difference is the model name. Specifications: - SoC: MT7628AN - RAM: DDR2 64MB - Flash: SPI NOR 8MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7612EN - Ethernet: 3x 10/100Mbps - Switch: SoC internal Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Tested on device by JasonHCH <hsuan670629@gmail.com> Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: make kmod-ata-core selected by dependent modulesupstreamless-old-masterSungbo Eo2020-03-111-21/+20
| | | | | | | | | | | | | | | | Currently kmod-ata-* will not get into images unless kmod-ata-core is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-ata-ahci - kmod-ata-ahci-mtk - kmod-ata-sunxi While at it, use AddDepends/ata for kmod-ata-pdc202xx-old. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* build: image: move IMAGE_SIZE to image.mkSungbo Eo2020-03-111-1/+1
| | | | | | | | | | IMAGE_SIZE is widely used in many targets. Declare it in the default template to clean up redundant code. This also prevents deriving IMAGE_SIZE unintentionally from the previously defined device. While at it, remove duplicate KERNEL_SIZE declaration. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add support for Ubiquiti UniFi nanoHDDavid Bauer2020-03-103-1/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: MediaTek MT7621AT WiFi: MediaTek MT7603 bgn 2T2R MediaTek MT7615 ac 4T4R Flash: 32M SPI (Macronix MX25L25635F) RAM: 128M DDR3 (Winbond W631GG6KB) LED: Dome (Blue / White) BTN: Reset Installation ------------ These instructions were written for firmware version v3.9.27. Downgrade if necessary. 1. Copy the OpenWrt sysupgrade image to the devices /tmp folder via scp. On factory defaults, user and password is "ubnt" at 192.168.1.20/24. 2. Write the bootselect flag. Otherwise, the device might boot from the wrong partition. Verify the mtd partition used in the command below is the one labled "bs" in /proc/mtd (as this might change in the future). > dd if=/dev/zero bs=1 count=1 of=/dev/mtd4 3. Write the OpenWrt sysupgrade to the mtd partitions labled "kernel0" and "kernel1". > dd if=/tmp/openwrt-sysupgrade.bin of=/dev/mtdblock6 > dd if=/tmp/openwrt-sysupgrade.bin of=/dev/mtdblock7 4. Reboot or powercycle the device. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for TP-Link RE210 v1Christoph Krapp2020-03-095-89/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: MediaTek MT7620A RAM: 64MB FLASH: 8MB SPI WLAN: 2G: MediaTek MT7620A 5G: MediaTek MT7610EN ETH: 1x 10/100/1000M (Atheros AR8035) LED: RSSI (orange/green) WiFi 2G (green) WiFi 5G (green) Power (green) System (red / green) BTN: Power Reset LED WPS Serial ------ P1 - Tx P2 - Rx P3 - GND P4 - VCC Pin 4 is the one closest to the LAN port. MAC overview ------------ WAN *:4c uboot 0x1fc00 2.4 *:4c uboot 0x1fc00 5 *:4e uboot 0x1fc00 +2 Installation ------------ Web interface: It is possible to upgrade to OpenWrt via the web interface. However, the OEM firmware upgrade file is required and a tool to fix the MD5 sum of the header. This procedure overwrites U-Boot and there is not failsafe / recovery mode present! To prepare an image, you need to take the header and U-Boot (i.e. 0x200 + 0x20000 bytes) from an OEM firmware file and attach the factory image to it. Then fix the header MD5Sum1. Serial/TFTP: You can use initramfs for booting via RAM or flash the image directly. Additional Notes: If the web interface upgrade fails, you have to open your device and attach serial console. Since the web upgrade overwrites the boot loader, you might also brick your device. In order to flash back to stock, the first header and U-Boot needs to be stripped from the original firmware. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [change rssi LED labels] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: increase spi-max-frequency to 50 MHz for D-Link DIR-810LAdrian Schmutzler2020-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Read times drop when increasing frequency to 25 MHz and 50 MHz, but not in between or for further increase. So, use 50 MHz as the lowest frequency with the fastest speed. Test results (thanks to Roger): The device reports a mx25l6405d flash chip. I tried all the maximum values in the devices' datasheet (Table 10. AC CHARACTERISTICS). All of them worked with and without "m25p,fast-read": > 10 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 1m 33.00s user 0m 0.01s sys 1m 7.56s > 25 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 34.42s user 0m 0.02s sys 0m 23.58s > 25 MHz, fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 34.45s user 0m 0.02s sys 0m 23.59s > 33 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 34.39s user 0m 0.00s sys 0m 23.60s > 33 MHz, fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 34.46s user 0m 0.01s sys 0m 23.62s > 50 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.81s user 0m 0.01s sys 0m 18.25s > 50 MHz, fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.84s user 0m 0.00s sys 0m 18.25s > 66 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.80s user 0m 0.01s sys 0m 18.23s > 66 MHz, fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.80s user 0m 0.02s sys 0m 18.23s > 86 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.84s user 0m 0.01s sys 0m 18.24s > 86 MHz, fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.80s user 0m 0.02s sys 0m 18.23s Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ramips: fix and tidy up DTS for D-Link DIR-810LAdrian Schmutzler2020-03-051-8/+10
| | | | | | | | | | | | | This patch addresses several issues for D-Link DIR-810L: - add correct button codes - harmonize button node names - use generic flash@0 - remove unused pin groups from state_default - improve sorting of properties Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ramips: fix partition offset for D-Link DIR-810LAdrian Schmutzler2020-03-051-2/+2
| | | | | | | | | | | | | | The Jffs2 partition for the D-Link DIR-810L is currently off by 0x10000. Apply the correct offset based on the other partitions' size/offset and the information about stock OS from the Wiki. This is just based on the named information and _not_ verified on device. Fixes: 36e3424fa520 ("ramips: add support for dir810l and asus rp-n53") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ramips: add support for NETGEAR R6700v2/AC2400Adrian Schmutzler2020-03-045-0/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: MediaTek MT7621AT RAM: 256M DDR3 FLASH: 128M NAND WiFi: MediaTek MT7615N an+ac MediaTek MT7615N bgn ETH: MediaTek MT7621AT BTN: 1x Connect (WPS), 1x WLAN, 1x Reset LED: Power (white/amber), WAN(white/amber), 2.4G(white), 5G(white), USB(white) , GuestWifi(white) 4x LAN(white/amber), Wifi Button(white), WPS Button(white) Installation: Login to netgear webinterface and flash factory.img Based on a discontinued GitHub Pull Request by kuyokushin <codenamezero@protonmail.com> https://github.com/openwrt/openwrt/pull/2545 NOTE: Netgear R6700 v2 have five clones: R6900 v2, R7450, Nighthawk AC2400, Nighthawk AC2100 and already added R6800. Rest of them should be really easy supportable. Image for R6700v2 should work perfectly with them. Please refer: https://github.com/openwrt/openwrt/pull/2614 Tested-by: Víctor Gibrán <victorgibranmz@hotmail.com> [R6700v2] Tested-by: John Landrum <jl31m10@yahoo.com> [AC2400] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [add guest led to mt7621_netgear_r6700-v2.dts end edit commit message] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ramips: mt7621: add support for Netgear R6800Pawel Dembicki2020-03-047-0/+272
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear R6800, aka Netgear AC1900 and R6800-100PES. Specification: - SoC: MediaTek MT7621AT (880 MHz) - Flash: 128 MiB NAND - RAM: 256 MiB - Wireless: MediaTek MT7615EN b/g/n , MediaTek MT7615EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - USB 2.0 - USB 3.0 - Serial baud rate of Bootloader and factory firmware: 57600 Known issues: - Device has 3 wifi LEDs: Wifi 5Ghz, Wifi 2.4Ghz and Wifi on/off. Wifi on/off is not used. Installation: - apply factory image via stock web-gui. Back to stock: - nmrpflash can be used to recover to the stock Netgear firmware. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ramips: mt7530: more detailed output for unexpected etag_ctrlYousong Zhou2020-03-031-1/+2
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ramips: mt7530: remove redundant global attrs for port mirroringYousong Zhou2020-03-031-88/+0
| | | | | | | | | | | | | | | | | | | | Global attributes enable_mirror_tx/enable_mirror_rx depend on runtime value of another global attribute mirror_source_port which just resides in the memory The same functionality can be achieved by directly setting port attribute of the same names. E.g. the following two groups of commands achieve the same thing swconfig dev switch0 set mirror_source_port 3 swconfig dev switch0 set enable_mirror_tx 1 swconfig dev switch0 set mirror_source_port 4 swconfig dev switch0 set enable_mirror_tx 1 swconfig dev switch0 port 3 set enable_mirror_tx 1 swconfig dev switch0 port 4 set enable_mirror_tx 1 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ramips: mt7620: disable images for Netgear 2700Petr Štetiar2020-03-021-0/+1
| | | | | | Because openwrt-ramips-mt7620-netgear_ex2700-squashfs-factory.bin is too big. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: bump 4.14 to 4.14.171Koen Vandeputte2020-02-245-14/+14
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2013-1798 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: move includes to DTSI for mt7628an_tplink_8m*Adrian Schmutzler2020-02-2213-33/+6
| | | | | | | | | | All devices inherited from mt7628an_tplink_8m.dtsi and mt7628an_tplink_8m-split-uboot.dtsi contain the same additional includes in the DTS files. Move them to the DTSI files instead. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 06:34:03 +0000