aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
Commit message (Collapse)AuthorAgeFilesLines
* Revert "ramips: Fix WiFi after 5f7396ebef09b224edf08b0bda113613a42f0928"John Crispin2018-06-0121-0/+82
| | | | | | This reverts commit 8ccdf809c0de567cfb781f38ce1c897b04cbeb78. Signed-off-by: John Crispin <john@phrozen.org>
* ramips: Use generic board detect for GnuBee devicesRosen Penev2018-05-306-9/+6
| | | | | | | | | | | | This is a port of an old commit from mkresin's tree: 09260cdf3e9332978c2a474a58e93a6f2b55f4a8 This has the potential to break sysupgrade but it should be fine as there is no stable release of LEDE or OpenWrt that support these devices. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 9685f3978795727ac99d5d20a4af16c808b1e24b)
* ramips: Fix WiFi after 5f7396ebef09b224edf08b0bda113613a42f0928Rosen Penev2018-05-3021-82/+0
| | | | | | | | | | | | | | That commit exposed a bug in the DTS files used by mt7621 where the wrong reg value for pcie1 (and potentially pcie2) was being used. This was causing WiFi failures for interfaces in pcie1. eg. 2.4GHz working but not 5GHz. As all of these dts entries are already specified in mt7621.dtsi, remove them. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 02f815d1907cdd7e042415a2b4a749c819087168)
* ramips: Fix up GnuBee PC1 DTS file a littleRosen Penev2018-05-241-7/+1
| | | | | | | | | There's nothing connected to i2c on this board, so remove it. Also edited the gpio group to match the PC2 as they're the same. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 8c818fa1f0507b0e17aa3ebf051439c9c65f78f3)
* ramips: change wifi led trigger for Archer C50v3David Bauer2018-05-241-2/+2
| | | | | | | | | This commit alters the TP-Link Archer C50v3 LED settings to use the phy trigger instead of the netdev one. This way the WiFi status is displayed even if the wifi interface name is altered. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit ce91c85e01050cb19c89c9a19369a56a94619e7f)
* ramips: fix Archer C50v3 LED mappingDavid Bauer2018-05-241-4/+4
| | | | | | | | This commit fixes the wrong LED mapping of the Archer C50 v3. Commit was tested with an EU device. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 35d00d9a41ac369fd4be4e37998043f11ce80906)
* kernel: enable THIN_ARCHIVES by defaultSergey Ryazanov2018-05-244-4/+0
| | | | | | | | | THIN_ARCHIVES option is enabled by default in the kernel configuration and no one target config disables it. So enable it by default and remove this symbol from target specific configs to keep them light. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit 67a3cdcbb05559549985a189eabaf2df92559ed7)
* kernel: enable FUTEX_PI by defaultSergey Ryazanov2018-05-244-4/+0
| | | | | | | | | | New FUTEX_PI configuration symbol enabled if FUTEX and RT_MUTEX symbols are enabled. Both of these symbols are enabled by default in the generic config, so enable FUTEX_PI by default too to keep platform specific configs minimal. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit bdc2b58c4bccb50242af853dc80b50f9324b841c)
* kernel: enable EXPORTFS by defaultSergey Ryazanov2018-05-244-4/+0
| | | | | | | | | OVERLAY_FS config symbol selects EXPORTFS since 4.12 kernel, we have OVERLAY_FS enabled by default, so enable EXPORTFS in the generic config of 4.14 and remove this option from platform specific configs. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit a08b0d0c3149060f1585ad3ea2ea3edfde71bce4)
* kernel: disable DRM_LIB_RANDOM by defaultSergey Ryazanov2018-05-244-4/+0
| | | | | | | | DRM_LIB_RANDOM config symbol selected only by DRM_DEBUG_MM_SELFTEST which is disable by default, so disable DRM_LIB_RANDOM by default too. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit 978543a246c6badb5e5e1c2430211e01f005af27)
* kernel: disable DMA_{NOOP|VIRT}_OPS by defaultSergey Ryazanov2018-05-244-8/+0
| | | | | | | | These options do not used by any supported arch, so disable them by default to make arch configs a bit more clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit ead26e9db649a508ba93e7e8193ada70322620b1)
* kernel: disable ARCH_WANTS_THP_SWAP by defaultSergey Ryazanov2018-05-244-4/+0
| | | | | | | | | Only one arch (x86_64) enables this option. So disable ARCH_WANTS_THP_SWAP by default and remove referencies to it from all configs (except x86_64) to make them clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit f928c338ad6c8215a5fe280473e37786157a2d05)
* ramips: add support for YUKAI Engineering Inc. BOCCOYuheiOKAWA2018-05-245-0/+174
| | | | | | | | | | | | | | BOCCO is a communication robot provided by YUKAI Engineering Inc. SoC: MT7620A MEM: 256MB Flash: 8MB NAND: 512MB (non support) Include Sound DAC and AMP. No Wired Ethernet. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> (cherry picked from commit d91953cb5351f1ab3e75ae9e2d9622f754d518ed)
* kernel: bump 4.14 to 4.14.43 for 18.06Koen Vandeputte2018-05-243-16/+10
| | | | | | | | | | | | | | | | | | | | | Refreshed all patches Dropped upstreamed patches: 522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch 523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch 525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch 527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch updated patches: 524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch 030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718 Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* Revert "ramips: mmc: Sync with staging drivers"John Crispin2018-05-155-2693/+3418
| | | | | | This reverts commit 2d401925b9bdf34de800fff57f593a3665de2a6a. Signed-off-by: John Crispin <john@phrozen.org>
* staging: mt7621-eth: fix return value check in mt7621_gsw_probe()Wei Yongjun2018-05-153-6/+6
| | | | | | | | | | In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: f079b6406348 ("staging: mt7621-eth: add gigabit switch driver (GSW)") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* staging: mt7621-eth: fix return value check in mtk_connect_phy_node()Wei Yongjun2018-05-151-2/+2
| | | | | | | | | | In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: e3cbf478f846 ("staging: mt7621-eth: add the drivers core files") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* staging: mt7621-eth: fix return value check in mtk_probe()Wei Yongjun2018-05-151-1/+1
| | | | | | | | | | In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: e3cbf478f846 ("staging: mt7621-eth: add the drivers core files") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: pci: sync with staging driverRosen Penev2018-05-151-168/+150
| | | | | | | | | | This is an amagalmation of two upstream commits dealing with whitespace and dead code removal. I'm synching instead of having two separate commits as they go out of order compared to previous commits here. Tested on GnuBee PC1. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: mmc: Sync with staging driversRosen Penev2018-05-155-3418/+2693
| | | | | | | | | | | | | Mostly whitespace cleanups. Some unneeded code was removed. MMC init was also moved to the probe function as in 6069bdd0871a20b5adce8d2f677946e05a2da609 The cleanup commits are over 100, making it hard to do them individually. Tested on GnuBee PC1 with an SD card being used as swap. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: Add i2c support for mt7620nMatthias Badaire2018-05-151-0/+23
| | | | | | I2c is supported on mt7620n like on mt7620a when checking the datasheet Signed-off-by: Matthias Badaire <mbadaire@gmail.com>
* ramips: remove unnecessary resource details.NeilBrown2018-05-141-15/+2
| | | | | | | | These resources are extracted from devicetree, so they aren't needed here. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: remove conditional compilation.NeilBrown2018-05-141-58/+8
| | | | | | | | | | | | | Code currently defines: and then compiles code only if they are defined. We might want to disable some of these via devicetree one day, but for now just remove the #defines and the conditions - all the code for different ports is easy to identify. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: improve interrupt mappingNeilBrown2018-05-142-69/+14
| | | | | | | | | | | | | | As the Interrupts for the PCI adapters are listed in devicetree we shouldn't need to have them explicit in the code. The simplest way to do this is to use of_irq_parse_and_map_pci() and specify an interrupt-map which identifies the different PCI hosts by bus/slot numbers. This has the advantage that the hwirq number are mapped to virq numbers for us, so the ugly hack can go. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: Remove redundant owner assignmentChristian Lütke-Stetzkamp2018-05-141-1/+0
| | | | | | | | | Remove the owner assignment form the platform driver as platform_driver_register() already initializes the owner. Found using coccinelle. Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: Move PCI driver to files directoryRosen Penev2018-05-142-842/+837
| | | | | | This will make it easier to port upstream code. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: move mtk-mmc init to probe function to avoid breaking NAND flashFelix Fietkau2018-05-081-36/+28
| | | | | | | The driver messes with the pin control settings - MMC and NAND are mutually exclusive Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: clean up the mt7621 nand flash driver hacks, add support for the ↵Felix Fietkau2018-05-083-79/+37
| | | | | | xiaomi mir3g flash chip Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add support for mqmaker witi 512mb versionDavide Ammirata2018-05-079-17/+49
| | | | | | | | | | | | Splitted out the dts file and create the new dts for the 256 MByte RAM and the 512 MB RAM version. Migrate both versions to the common board detection. The install the 512 MByte Version on a board running the 256 MByte image, a forceful sysupgrade with the -F flag is required. Signed-off-by: Davide Ammirata <list@davidea.it>
* ramips: add support for Ravpower WD03Matthias Badaire2018-05-074-0/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RavPower WD03 is a battery powered SD card reader and a USB port. Specifications: SOC: MediaTek MT7620N BATTERY: 6000mah WLAN: 802.11bgn LAN: 1x 10/100 Mbps Ethernet USB: 1x USB 2.0 (Type-A) RAM: PM Tech PMD708416CTR-5CN 32 MB FLASH: Holtek HT66F40 - 8 MB Flash LED: Power button and 4 leds to indicate power level of the battery (could not get control of that) INPUT: Power, reset button OTHER: USB SD-Card reader with card detect on GPIO#42 Tested and working: - Ethernet - 2.4 GHz WiFi (Correct MAC-address) - installation from tftp - OpenWRT sysupgrade (Preserving and non-preserving) - LEDs - Buttons Installation: - Download the sysupgrade image - Place it in the root of a clean TFTP server running on your computer. - Rename the image to "kernel" — be sure there is no file extension. - Plug the WD03 into your computer via ethernet. - Set your computer to use 10.10.10.254 as its IP address. - With your WD03 shut down, hold down the power button until the first white LED lights up. - Push and hold the reset button and release the power button. Continue holding the reset button for 30 seconds or until it begins searching for files on your TFTP server, whichever comes first. - The WD03 (10.10.10.128) will look for your computer at 10.10.10.254 and install the kernel file. Once it has finished installation of the kernel file, it will search for a (nonexistent) rootfs file — when it begins searching for this file, shut down the WD03 by holding the power button normally. - Start up your WD03 normally. Signed-off-by: Matthias Badaire <mbadaire@gmail.com>
* ramips: disable spi full duplex on mt7621John Crispin2018-05-051-6/+18
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix mt7628 eval board pinmuxMathias Kresin2018-04-251-1/+1
| | | | | | | | | There is no pinmux group "jtag" for mt7628 and the pinmux driver fails to load due to the use of the not existing group. Fixes: FS#1515 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: create image for mt7628 evb boardMathias Kresin2018-04-231-0/+1
| | | | | | | The image for the EVB board got lost with the merge of the mt7628 and mt7688 subtargets. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use patch-dtb for F5D8235 V1Tobias Wolf2018-04-231-3/+1
| | | | | | | | | | The old DTB method (OWRTDTB) is not recognized by the boot process anymore with 4.9/4.14. This patch reuses KERNEL_DTB to get a valid DTB applied to the kernel image. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
* build: consolidate fake uImage header build commandsMathias Kresin2018-04-201-2/+2
| | | | | | | | | | | Merge the two existing functions and use a parameter for the type header field. It updates the syntax of the former mpc85xx fake ramdisk header command to be compatible with mkimage from u-boot 2018.03 and fixes the build error spotted by the build bot. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix locking issues in the ethernet driverFelix Fietkau2018-04-171-2/+3
| | | | | | | The stats update needs to protect against being interrupted by a tasklet The u64 stats seqlock needs to be initialized Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mt7620: fix double use of pinsMathias Kresin2018-04-173-6/+0
| | | | | | | | | The pins are used as (LED) GPIOs and can't be used at the same time as hardware controlled ephy (LED) pins. Fixes: FS#1500 Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.14 to 4.14.34Stijn Tintel2018-04-162-6/+6
| | | | | | | | | | | | | Refresh patches. Update patches that no longer apply: - backport/313-netfilter-remove-defensive-check-on-malformed-packet.patch - pending/642-net-8021q-support-hardware-flow-table-offload.patch Compile-tested: x86/64. Runtime-tested: x86/64. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: remove broken and bogus spinlock in the SPI driverFelix Fietkau2018-04-141-4/+1
| | | | | | Based on patch by Neil Brown Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add missing unlock in fe_phy_link_adjustFelix Fietkau2018-04-141-0/+1
| | | | | | Based on patch by Neil Brown Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix usb phy compatible string (should fix FS#1489)Felix Fietkau2018-04-131-1/+1
| | | | | | | In the new USB phy driver, it checks the compatible string before attempting to iomap its mem resource and do the extra PHY init Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: rename pwm kernel moduleMathias Kresin2018-04-081-5/+5
| | | | | | | | | | | | | | With kernel 4.14 the OpenWrt specific module name collides with the upstream added module for Mediatek ARM Socs. During addition of preliminary support for kernel 4.14, the config symbol used by the out of tree driver was already renamed but the ramips kernel package wasn't updated. Fix the build error by updating the config and kernel module name for the kernel package. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for Zorlik ZL5900V2Vianney le Clément de Saint-Marcq2018-04-086-1/+109
| | | | | | | | | | | | | | | | | | | | | | | | The Zorlik ZL5900V2 is an unbranded clone of HAME MPR-A1/2. It is marketed as "3G Wi-Fi Router". Only the PCB has the model name "ZL5900V2" printed on it. Specifications: - Ralink RT5350F (360 MHz) - 32 MB RAM - 8 MB Flash - 802.11bgn 1T1R - 1x 10/100 Mbps Ethernet - 1x USB 2.0 (Type-A) - 5200 mAh battery The ramdisk image (not the squashfs sysupgrade image) can be flashed through the web interface (named "GoAhead") of the factory firmware. However, as the factory firmware does not cleanly unmount the rootfs before flashing, the device may hang instead of rebooting after successful write. Power cycling the device gets you in OpenWrt where the squashfs image may be flashed through normal sysupgrade procedure. Signed-off-by: Vianney le Clément de Saint-Marcq <code@quartic.eu>
* ramips: add support for the YouHua WR1200JSZheng Qian2018-04-086-1/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | YouHua tech WR1200JS is an AC1200 router with 5 1Gb ports (4 Lan, 1 Wan) and 1 USB 2.0 port. Devices is base on MediaTek MT7621AT + MT7603E + MT7612E. Specification: - MT7612AT (880 MHz) - 128 MB of RAM - 16 MB of FLASH (SPI NOR) - 5x 10/100/1000 Mbps Ethernet - 2T2R 2.4 GHz (MT7603E) - 2T2R 5 GHz (MT7612E) - 1x USB 2.0 - 10x LED (Power 2G 5G WPS Internet LAN4-1 USB) - 3x button (reset wifi wps) - DC jack for main power input (12V) Installation: 1.) Press reset key 5 sec and restore the factory default 2.) Login webUI and change username to root and set a new password 3.) Visit http://192.168.2.254/adm/telnetd.shtml and turn on the telnet service 4.) Copy openwrt-ramips-mt7621-youhua_wr1200js-initramfs-kernel.bin to a usb pan 5.) Plug the usb pan to the router, telnet to the router and login by root 6.) cd /media/sda1 and check the initramfs file is there 7.) exec command: mtd_write write openwrt-ramips-mt7621-youhua_wr1200js-initramfs-kernel.bin Kernel 8.) reboot and visit 192.168.1.1 Signed-off-by: Zheng Qian <sotux82@gmail.com>
* ramips: add dwr-512 jboot firmware configurationGiuseppe Lippolis2018-04-085-15/+19
| | | | | | | | | | | | | | | | | | | | | The previous fw version require the replacement of the stock bootloader with u-boot. This prevent an easy stock restore of the original fw. Now a proper fw util has been developed to manage the stock jboot bootloader. Therefore make sense have a fw image for the stock bootloader. The old fw configuration (u-boot) is not compatible with the new one and will not be supported anymore. So at the end 2 image can be generated: 1) factory image with jboot bootloader openwrt-ramips-rt305x-dwr-512-b-squashfs-factory.bin 2) sysupgrade image with jboot bootloader openwrt-ramips-rt305x-dwr-512-b-squashfs-sysupgrade.bin Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ramips: fix usbphy DT nodes on linux 4.14Vianney le Clément de Saint-Marcq2018-04-077-25/+34
| | | | | | | | | | | | | | The Ralink USB PHY driver merged into mainline has a slightly different device tree binding than the patch that was used with linux 4.9. The new driver requires a `ralink,sysctl` node pointing to the `syscon` node. This patch also sets `#phy-cells` to 0, as recommended by the mainline documentation [1]. [1] Documentation/devicetree/bindings/phy/ralink-usb-phy.txt Signed-off-by: Vianney le Clément de Saint-Marcq <code@quartic.eu>
* ramips: add U-Boot env support for ALFA Network AC1200RMPiotr Dymacz2018-04-062-2/+7
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: image: drop redundant SUPPORTED_DEVICESPiotr Dymacz2018-04-062-2/+0
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: fix build error caused by missing ifdef guard in hwnat codeJohn Crispin2018-04-061-1/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: implement hardware NAT offload for MT7621John Crispin2018-04-068-3/+985
| | | | | | | | | | Supports IPv4 flow offloading on MT7621 for Routing, SNAT and DNAT Supported are regular ethernet->ethernet connections, including one 802.1q VLAN and/or PPPoE encapsulation Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 05:59:51 +0000