aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 4.4 to 4.4.167Koen Vandeputte2018-12-182-5/+5
| | | | | | | | | | | | | | | | | | | | Refreshed all patches. Removed upstreamed: - 203-MIPS-ath79-fix-restart.patch - 330-Revert-MIPS-BCM47XX-Enable-74K-Core-ExternalSync-for.patch - 051-0001-ovl-rename-is_merge-to-is_lowest.patch - 051-0002-ovl-override-creds-with-the-ones-from-the-superblock.patch - 051-0005-ovl-proper-cleanup-of-workdir.patch Altered patches: - 201-extra_optimization.patch - 304-mips_disable_fpu.patch Compile-tested on: ar71xx, cns3xxx, imx6, mpc85xx Runtime-tested on: ar71xx, cns3xxx, imx6, mpc85xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump kernel 4.4 to version 4.4.153Hauke Mehrtens2018-08-301-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump kernel 4.4 to version 4.4.147Matthias Schiffer2018-08-091-3/+3
| | | | | | | | target/linux/ar71xx/patches-4.4/103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch has been applied upstream; the two deleted brcm2708 patches have been useless even before (as the second one only reverted the first one). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: bump kernel 4.4 to version 4.4.140Hauke Mehrtens2018-07-132-30/+1
| | | | | | | | | | These two patches: target/linux/ar71xx/patches-4.4/403-mtd_fix_cfi_cmdset_0002_status_check.patch target/linux/ramips/patches-4.4/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch are replaced by upstream commit 242dbd2b3df ("mtd: cfi_cmdset_0002: Change erase functions to check chip good only") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump kernel 4.4 to version 4.4.137Hauke Mehrtens2018-06-157-0/+7
| | | | | | | | | | | | The new option CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE was added, in this commit: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.4.y&id=ffe4bf3eb3cfa10f9ef295c08c21f4fe3bb07e21 Handle it by setting it to the opposite value CONFIG_CC_OPTIMIZE_FOR_SIZE is set to. Tested on lantiq Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump kernel 4.4 to 4.4.131 for 17.01Etienne Haarsma2018-05-072-5/+5
| | | | | | | | | * Refreshed patches Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
* kernel: bump kernel 4.4 to 4.4.129 for 17.01Etienne Haarsma2018-04-302-4/+4
| | | | | | | | | * Refreshed patches Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
* Kernel: bump 4.4 to 4.4.124 for 17.01Stijn Segers2018-04-014-7/+7
| | | | | | | | | | * Refreshed patches * Removed 087-Revert-led-core-Fix-brightness-setting-when-setting-.patch (applied upstream) Compile-tested on ar71xx, ramips/mt7621, x86/64 Run-tested on ar71xx Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* kernel: update 17.01 kernel to 4.4.116Stijn Segers2018-02-202-3/+3
| | | | | | | | | | | | | | | | | | This bumps the 4.4. kernel in LEDE 17.01 to 4.4.116. More Meltdown & Spectre mitigation. * Refresh patches. * Refresh x86/config for RETPOLINE. * Deleted 8049-PCI-layerscape-Add-fsl-ls2085a-pcie-compatible-ID.patch (accepted upstream) * Deleted 8050-PCI-layerscape-Fix-MSG-TLP-drop-setting.patch (accepted upstream) * 650-pppoe_header_pad.patch does not apply anymore (code was replaced). Bumps from 4.4.113 to 4.4.115 were handled by Kevin Darbyshire-Bryant. Compile-tested on: ar71xx, ramips/mt7621, x86/64 Run-tested on: ar71xx, ramips/mt7621, x86/64 Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ramips: backport mt7530/762x switch fixesJo-Philipp Wich2018-02-151-20/+239
| | | | | | | | | | dc7a1e8555 ("ramips: fix reporting effective VLAN ID on MT7621 switches") 341b1427fc ("ramips: properly map pvid for vlans with remapped vid on mt7530/762x switches") bb4002c79d ("ramips: don't clobber vlans with remapped vid on mt7530/762x switches") Fixes FS#991, FS#1147, FS#1341 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix lenovo newifi-y1 switch and LED configChuanhong Guo2018-01-092-3/+5
| | | | | | | | | | | | | | There are 3 ethernet ports on Y1. LAN1 on port1, LAN2 on port0 and WAN on port4. Use a standalone switch configuration to match this and use the switch trigger so that LAN LED could indicate the connetction status for both lan ports correctly. This patch also drop the internet led configuration, because there is a WAN led for port4 and eth0.2 isn't always used as WAN. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: firewrt: indicate boot status via LEDMathias Kresin2018-01-091-0/+1
| | | | | | | Add the Firefly FireWRT gree power LED to diag.sh to indicate the boot status via the power LED. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix widora neo diag ledMathias Kresin2017-12-291-2/+4
| | | | | | | The diag LED is named widora:orange:wifi and can't be derived from the boardname. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.4 to 4.4.107Etienne Haarsma2017-12-237-8/+8
| | | | | | | | | | | | | Bump 4.4 to 4.4.107 and refreshed all patches. Made the following patch for Mediatek and Oxnas compatible with kernel 4.4.107: 0072-mtd-backport-v4.7-0day-patches-from-Boris.patch Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com> Reviewed-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Rosen Penev <rosenp@gmail.com>
* ramips: support jumbo frame on mt7621 up to 2kMichael Lee2017-12-134-17/+32
| | | | | Signed-off-by: Michael Lee <igvtee@gmail.com> (cherry picked from commit eee09bfe01e8cc2db1501f82dde7b9b6bb424faf)
* kernel: bump 4.4 to 4.4.103 for 17.01Etienne Haarsma2017-12-124-66/+2
| | | | | | | | | | | | | Refreshed all patches. Removed upstream ramips patches: 0101-MIPS-ralink-Fix-MT7628-pinmux.patch 0102--MIPS-ralink-Fix-typo-in-mt7628-pinmux-function.patch Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
* ramips: backport MT7628 pinmux fixesMathias Kresin2017-11-274-2/+66
| | | | | | | | | | | | According to the datasheet the REFCLK pin is shared with GPIO#37 and the PERST pin is shared with GPIO#36. While at it fix a typo inside the pinmux setup code. The function is called refclk and not reclk. Update device tree source files accordingly. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add missing reset button for Nexx WT1520INAGAKI Hiroshi2017-11-271-9/+15
| | | | | | | | | | | | | This commit adds missing the GPIO key used as reset button. Nexx WT1520 has a GPIO key for factory reset, but it's not defined in WT1520.dtsi and cannot use it. Drop the UART (full) from the device tree source file, it was never used for this board. Adjust the kernel bootargs accordingly. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [add note about dropped UART (full) to the commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.4 to 4.4.102Etienne Haarsma2017-11-263-15/+3
| | | | | | | | | | | | Refreshed all patches. Removed upstream ramips patch: 0063-set-CM_GCR_BASE_CMDEFTGT_MEM-according-to-datasheet.patch Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com> Tested-by: Stijn Segers <francesco.borromini@inventati.org>
* ramips: fix Planex CS-QR10 device packagesMathias Kresin2017-11-221-1/+3
| | | | | | | | | Add kmod-sound-core, it is a dependency of kmod-sound-mt7620 and will not be autoselected. Remove kmod-i2c-core, it will be autoselected by kmod-i2c-ralink. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix DCH-M225 supportMathias Kresin2017-11-222-2/+7
| | | | | | | | | | | | | | Setting the pins of the uartf group to gpio+i2s at the time the i2c driver loads is to late for the WPS gpio button. The gpio-keys driver fails to load since the pin used by the WPS button is not yet set to GPIO. The WPS button with the rfkill keycode is essential for this wifi only board. Add the missing sound and i2c kernel modules corresponding to the device nodes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix Youku-YK1 supportEdmunt Pienkowsky2017-10-274-5/+6
| | | | | | | | | | | | | | | | | | | | | | Remove the ephy-pins from the ethernet device tree node. The ephy-pins are useed to controll the ePHY LEDs and this board doesn't have these. Instead one of the ePHY pins is used in GPIO mode to control the WAN LED. Use the switch LED trigger to control the WAN LED. Move the power LED handling to diag.sh to show the boot status via this LED. Add the missing kernel packages for USB and microSD card reader to the default package selection. Fix the maximum image size value. The board has a 32MByte flash chip. Fixes: FS#1055 Signed-off-by: Edmunt Pienkowsky <roed@onet.eu> [make the commit message more verbose, remove GPIO pinmux for pins not used as GPIOs] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix default usb support for nexx wt3020-8MAlberto Bursi2017-10-241-0/+1
| | | | | | | the nexx wt3020-8M has a usb 2.0 port, add usb 2.0 support packages to its default package list. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ramips: fix compile warning in MT7621 NAND driverFelix Fietkau2017-10-161-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix typo in MT7621 NAND driverFelix Fietkau2017-10-161-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: sync with version 878456caf60d from masterFelix Fietkau2017-10-1330-48/+34
| | | | | | | Backport required DT changes from commit dabdd123c90c. Significantly improves stability and performance for MT76x2 and MT7603 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mt7620: do not pad sysupgrade Archer imagesThibaut VARENE2017-10-041-3/+3
| | | | | | | | | | | | | | | | The current makefile unnecessarily pads sysupgrade image for Archer devices. This has three implications: 1. higher risk of OOM when uploading the binary image to the device 2. much slower upgrade due to time wasted erasing and writing padding 3. grows image beyond available flash size if metadata are appended This is already fixed in master, albeit in a completely different way (the whole target have been reworked) Fixes: FS#1025, FS#1039 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* kernel: update 4.4 to 4.4.89Hauke Mehrtens2017-09-301-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: fix hg255d LED status supportDavid Yang2017-09-131-0/+1
| | | | | | | | Use the green power LED for boot status indication. Source: https://my.oschina.net/osbin/blog/278782 Para 3 Signed-off-by: David Yang <mmyangfl@gmail.com>
* kernel: update 4.4 to 4.4.83Kevin Darbyshire-Bryant2017-08-172-7/+7
| | | | | | | | | | | | | | | Refresh patches. Minor update 704-phy-no-genphy-soft-reset.patch which was partially accepted upstream. Compile-tested on ar71xx. Runtime-tested on ar71xx. Fixes the following vulnerabilities: - CVE-2017-7533 (4.4.80) - CVE-2017-1000111 (4.4.82) - CVE-2017-1000112 (4.4.82) Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* ramips: fix WHR-1166D WAN portMathias Kresin2017-08-111-1/+1
| | | | | | | | | | | | By adding the ICPlus IP1001 phy driver an already set RGMII delay mode is reset during driver load. Set the rgmii rx delay to fix corrupt/no packages in case the WAN port negotiates to 1000MBit. Fixes: FS#670 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: ArcherC50v1: fix wlan2g MAC addressThibaut VARENE2017-08-061-0/+2
| | | | | | | | | | By default the wlan eprom contains the generic ralink MAC which is not the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses are decremented from the ethernet MAC. This patch fixes the MAC address for wlan2g in line with OFW. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: fix Omnima MiniEMBWiFi imageMathias Kresin2017-08-021-0/+1
| | | | | | | Reference the Omnima MiniEMBWiFi device tree source file in the image build code. Otherwise the dts of the image processed before is used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: build HuaWei HG255D imageMathias Kresin2017-08-021-0/+7
| | | | | | | The code to build an image was disabled some time ago for unknown reasons albeit the image looks fine. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add missing partitionsMathias Kresin2017-08-022-9/+57
| | | | | | The partitions were lost during migration to device tree. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ralink: fix rcu_sched stalls on mt7621John Crispin2017-08-011-0/+98
| | | | | | | | | | there were 2 bugs *) core1 came up with a bad bogo mips, looks like the clock needed time to stabilize *) HPT frequency was not set making r4k timers not come up properly Backport of 9551d91b1d6 "ralink: fix rcu_sched stalls on mt7621". Signed-off-by: John Crispin <john@phrozen.org>
* ramips: Archer C50v1: fix power ledThibaut VARENE2017-07-292-1/+1
| | | | | | | | | | 01_leds had a workaround for the power led to compensate for the inverted GPIO state. This patch was missing from my previous commit. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> [add the power led default-state which was omitted in the last commit by me] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: Archer C50v1: fix switch port numberingThibaut VARENE2017-07-291-1/+4
| | | | | | | | Luci shows switch ports in wrong order on that device. This patch fixes switch port numbering and matches them to the device silkscreen. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: Archer C50v1: fix LEDs active levelsThibaut VARENE2017-07-291-2/+2
| | | | | | | | | | All LEDs GPIOs are active low on this device. WAN and POWER states were inverted. Add default state for power. Tested on Archer C50v1. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: fix Mercury MAC1200R v2.0 board nameMathias Kresin2017-07-292-1/+2
| | | | | | | | | | | | With d2b6bf141662 ("ramips: fix image validation errors") the board name was changed to fix an image validation error. But this change wasn't applied to all other files using the board name, which broke sysupgrade. Revert this change and use the former board name in the metadata instead. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add NULL clock fix send upstreamMathias Kresin2017-07-291-0/+43
| | | | | | | | | | Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: FS#735 Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: update kernel 4.4 to version 4.4.79Hauke Mehrtens2017-07-289-293/+7
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: DIR-860L-B1 fix switch port numberingThibaut VARENE2017-07-251-1/+4
| | | | | | | | Luci shows switch ports in inverted order on that device. This patch fixes switch port numbering and matches them to the device silkscreen. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: fix wps button gpio for DWR-512Giuseppe Lippolis2017-07-251-1/+1
| | | | | | The WPS button is at GPIO#7. Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ramips: DTS: VoCore2 improvements/fixesPaul Wassi2017-07-251-22/+3
| | | | | | | | | | | The VoCore2 features 128MB of RAM, therefore set memory in DTS to 128*1024*1024 = 0x8000000 The board's LED is connected to GND, set it to ACTIVE_HIGH here. Make serial console working again on kernel 4.9 by change of pinmux configuration. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ramips: fix Xiaomi MiWiFi Nano firmware partition sizeMathias Kresin2017-07-081-1/+1
| | | | | | | | | | Even the commit message of the patch adding support for the MiWiFi Nano says that a 16 MB flash chip is used. Extend the firmware partition to make use of all available flash space. Fixes: FS#622 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix Phicomm K1S(PSG1208) pinmux小桥2017-06-121-1/+1
| | | | | | Use gpio function for pins with LEDs. Signed-off-by: 小桥 <29551030@qq.com>
* ramips: add om-watchdog to rut5xx DEVICE_PACKAGESSteffen Weinreich2017-05-151-0/+1
| | | | | | Add om-watchdog as default package for rut5xx. Signed-off-by: Steffen Weinreich <steve@weinreich.org>
* ramips: fixup-mac-address: add missing includeJo-Philipp Wich2017-05-111-0/+1
| | | | | | | | | Add missing include of ramips.sh in order to import the missing ramips_board_name() procedure. Fixes FS#774. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: add factory firmware for Tp-Link C20i/C50Henryk Heisig2017-05-051-0/+4
| | | | | | TP-Link firmware doesn't accept sysupgrade.bin with metadata. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-29 23:31:14 +0000