aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/patches-4.14
Commit message (Collapse)AuthorAgeFilesLines
* ralink: fix mt7620 nd_sd pinmuxMathias Kresin2018-11-261-0/+29
| | | | | | | | | In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are configured as GPIOs. If they are blocked by the sd function, they can't be used as GPIOs. Reported-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* Revert "ramips: mt7621-spi: replace the driver with upstream staging one"John Crispin2018-11-261-121/+98
| | | | | | | | This reverts commit a44f0000779d48c061703351df58adb88419a7c3. This breaks some mt7621 devices. Signed-off-by: John Crispin <john@phrozen.org>
* ramips: mt7621-spi: replace the driver with upstream staging oneChuanhong Guo2018-11-261-98/+121
| | | | | | That driver is more efficient thanks to the refactor of spi reading operation. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: fix cpu clock of mt7621 and add dt clk devicesWeijie Gao2018-11-262-19/+224
| | | | | | | | | | For a long time the mt7621 uses a fixed cpu clock which causes a problem if the cpu frequency is not 880MHz. This patch fixes the cpu clock calculation and adds the cpu/bus clkdev which will be used in dts. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* ramips: merge two patches 101-mt7621-timer and 998-mt7621-needs-jiffiesWeijie Gao2018-11-262-10/+8
| | | | | | | | These two patches both modified the mt7621.c, and the patch file 998-mt7621-needs-jiffies.patch adds only one line which is used by the another patch file. So merge them into one file. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* ralink: Add support for GPIO as interrupt-controllerDaniel Santos2018-11-261-0/+51
| | | | | | | | | The gpio-ralink driver has everything it needs to be used as an interrupt controller except for device tree support. This simple patch adds that support by configuring the irq domain to use two cells and adding the appropriate documentation to the devicetree bindings. Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
* ramips: use separated mtd patch reverting write_page() removalRafał Miłecki2018-11-092-29/+68
| | | | | | | This helps understanding mtd changes needed to get downstream NAND driver working. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 4.14 to 4.14.79Koen Vandeputte2018-11-056-11/+11
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: Add support for Winbond w25q128jv SPI NOR flashBaptiste Jonglez2018-10-202-7/+7
| | | | | | | | | | | | | | | | | Newer batches of several Mikrotik boards contain this yet-unsupported flash chip, for instance: - rb941-2nd (hAP lite) - rb952ui-5ac2nd (hAP ac lite) - RBM33G and probably other Mikrotik boards need this patch as well. The patch was submitted upstream by Robert Marko: https://patchwork.ozlabs.org/patch/934181/ Closes: FS#1715 Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org> Cc: Robert Marko <robimarko@gmail.com>
* kernel: bump 4.14 to 4.14.75Koen Vandeputte2018-10-101-1/+1
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: set rt2880 pci controller of_nodeMathias Kresin2018-10-071-0/+32
| | | | | | | Set the PCI controller of_node such that PCI devices can be instantiated via device tree. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.14 to 4.14.74Koen Vandeputte2018-10-041-2/+2
| | | | | | | | | | | | | Refreshed all patches. Fixes CVE: - CVE-2018-7755 Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.70Koen Vandeputte2018-09-172-3/+3
| | | | | | | | | | | | | | | Refreshed all patches. Added new patch: - 192-Revert-ubifs-xattr-Don-t-operate-on-deleted-inodes.patch This fixes a bug introduced in upstream 4.14.68 which caused targets using ubifs to produce file-system errors on boot, rendering them useless. Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: Fix early memory calculation for certain MIPS platformsTobias Wolf2018-09-101-0/+45
| | | | | | | | | Kernel upstream commit 67a3ba25aa95 ("MIPS: Fix incorrect mem=X@Y handling") introduced a new issue for rt288x where "PHYS_OFFSET" is 0x0 but the calculated "ramstart" is not. As the prerequisite of custom memory map has been removed, this results in the full memory range of 0x0 - 0x8000000 to be marked as reserved for this platform. This patch adds the originally intended prerequisite again. Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
* ramips: add rt3352 SPI_CS1 pinmuxMathias Kresin2018-09-061-0/+45
| | | | | | | | The rt3352 has a pin that can be used as second spi chip select, watchdog reset or GPIO. The pinmux setup was missing the definition of said pin but it is already used in the SoC dtsi. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.14 to 4.14.67Koen Vandeputte2018-08-281-1/+1
| | | | | | | | | | | | Refreshed all patches. Removed upstreamed patches: - 037-v4.18-0008-ARM-dts-BCM5301x-Fix-i2c-controller-interrupt-type.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: use ralink,nr-gpio instead of ralink,num-gpiosMathias Kresin2018-08-043-4/+4
| | | | | | | | | | | Since commit c1e7738988f5 ("checks: add gpio binding properties check") dtc treats any *-gpios and *-gpio property as phandle at least during checks. The only whitelisted property is nr-gpio. Use ralink,nr-gpio in favour of ralink,num-gpios to get rid of false positive warnings. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: convert gpio-export to platform driverRené van Dorst2018-08-041-7/+4
| | | | | | | | | | | | Without this patch you will get an error "gpio-export probe deferral not supported" when you try to export i2c expander gpio pins. gpio-export is probed long before i2c-bus and i2c expander are created and it doesn't retry it so none pins are exported. Signed-off-by: René van Dorst <opensource@vdorst.com> apply the change to all instances of the gpio exports patch Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.14 to 4.14.59Stijn Tintel2018-07-312-30/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop patch that was superseded upstream: ramips/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch Drop upstreamed patches: - apm821xx/020-0001-crypto-crypto4xx-remove-bad-list_del.patch - apm821xx/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch - ath79/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch - brcm63xx/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch - brcm63xx/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch - generic/backport/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch - generic/pending/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch - generic/pending/900-gen_stats-fix-netlink-stats-padding.patch In 4.14.55, a patch was introduced that breaks ext4 images in some cases. The newly introduced patch backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch addresses this breakage. Fixes the following CVEs: - CVE-2018-10876 - CVE-2018-10877 - CVE-2018-10879 - CVE-2018-10880 - CVE-2018-10881 - CVE-2018-10882 - CVE-2018-10883 Compile-tested: ath79, octeon, x86/64 Runtime-tested: ath79, octeon, x86/64 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: clean up and fix MT7621 NAND driver issuesFelix Fietkau2018-07-111-74/+25
| | | | | | | | | | | | - remove misaligned custom buffer allocation in the NAND driver - remove broken bounce buffer implementation for 16-byte align Let the MTD core take care of both Fixes messages like these: [ 102.820541] Data buffer not 16 bytes aligned: 87daf08c Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.14 to 4.14.54Koen Vandeputte2018-07-111-1/+1
| | | | | | | | | | | | Rereshed all patches Reworked patches to match upstream: 335-v4.16-netfilter-nf_tables-add-single-table-list-for-all-fa.patch Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* treewide: gpio-export: add error handlingMathias Kresin2018-06-281-1/+3
| | | | | | | | Check if the GPIO is valid (or set at all). If no GPIO is set in the devicetree, a gpiolib related kernel warning + stacktrace is shown during boot and gpio-export reports GPIOs as exported albeit none really is. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.14 to 4.14.49Koen Vandeputte2018-06-182-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, x86-64 Runtime-tested on: cns3xxx, imx6, x86-64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: rename ethernet driver folder to the same one that upstream usesFelix Fietkau2018-06-131-41/+0
| | | | | | | Preparation for sharing offload code with the mediatek target through generic files/ Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix reboot with W25Q256 with 4-address-mode enabledDaniel Golle2018-06-071-0/+73
| | | | | | | | | | | | | | | Some board vendors actually changed the loader to expect the chip to come up in 4-address-mode and flipped the ADP bit in the flash chip's configuration register which makes it come up in 4-address-mode. Hence it doesn't make sense to avoid switching to 4-address-mode on those boards but the opposite as otherwise reboot hangs eg. on the WrtNode2 boards. Fix this by checking the ADP register and only using SPI_NOR_4B_READ_OP on chips which have ADP==0 (come up in 3-byte mode). See also datasheet section 7.1.11 Power Up Address Mode (ADP) Fixes: 22d982ea0 ("ramips: add support for switching between 3-byte and 4-byte addressing on w25q256 flash") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "ramips: Move PCI driver to files directory"John Crispin2018-06-011-1/+842
| | | | | | This reverts commit a098a78a33a6b096d15c9982b5d6457988e09f03. Signed-off-by: John Crispin <john@phrozen.org>
* kernel: bump 4.14 to 4.14.44Stijn Tintel2018-05-291-1/+1
| | | | | | | | | | | | | | Refresh patches. Remove upstreamed patch: generic/pending/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch Update patches that no longer applies: generic/hack/901-debloat_sock_diag.patch Compile-tested on: x86/64. Runtime-tested on: x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.14 to 4.14.42Koen Vandeputte2018-05-223-8/+8
| | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.41Koen Vandeputte2018-05-183-16/+10
| | | | | | | | | | | | | | | | | | | | | Refreshed all patches Dropped upstreamed patches: 522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch 523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch 525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch 527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch updated patches: 524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch 030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718 Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: dwc2: add support for host mode external vbus supplyMathias Kresin2018-05-171-1/+1
| | | | | | | | Backport patch adding support for the vbus-supply devicetree property, which allows to specific GPIOs (via fixed regulators) to enable vbus/usb power. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: Move PCI driver to files directoryRosen Penev2018-05-141-842/+1
| | | | | | This will make it easier to port upstream code. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: clean up the mt7621 nand flash driver hacks, add support for the ↵Felix Fietkau2018-05-083-79/+37
| | | | | | xiaomi mir3g flash chip Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: disable spi full duplex on mt7621John Crispin2018-05-051-6/+18
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: bump 4.14 to 4.14.34Stijn Tintel2018-04-162-6/+6
| | | | | | | | | | | | | Refresh patches. Update patches that no longer apply: - backport/313-netfilter-remove-defensive-check-on-malformed-packet.patch - pending/642-net-8021q-support-hardware-flow-table-offload.patch Compile-tested: x86/64. Runtime-tested: x86/64. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: remove broken and bogus spinlock in the SPI driverFelix Fietkau2018-04-141-4/+1
| | | | | | Based on patch by Neil Brown Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: move mtk-mmc driver code out of patches-*/ and into files-*/Felix Fietkau2018-04-051-4779/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mt7620: eMMC: fix compiler warnings in non-debug modeAndré Draszik2018-04-041-20/+13
| | | | | | | | | | | drivers/mmc/host/mtk-mmc/dbg.c:51:13: warning: 'cmd_buf' defined but not used [-Wunused-variable] static char cmd_buf[256]; ^~~~~~~ In addition, msdc_reg[] is completely unused, even in debug mode. Signed-off-by: André Draszik <git@andred.net>
* ramips: mt7620: eMMC: remove unused variableAndré Draszik2018-04-041-4/+1
| | | | | | | | msdc_6575_host[] is unused, just remove it. Also, it was the source of memory corruption up until the previous fix to this driver. Signed-off-by: André Draszik <git@andred.net>
* ramips: mt7620: eMMC: stop invalid memory access if only one device is definedAndré Draszik2018-04-041-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pdev->id is -1 when only one device exists, and is used: * as an index into drv_mode[] to determine whether to use PIO or DMA mode (via host->id) * as an index into msdc_6575_host[], to store the mmc_priv() data. Obviously, -1 is not a valid index in either case, causing us to read invalid memory, and memory corruption, respectively. The invalid memory read is causing non-deterministic behaviour, in particular in the v4.4 kernel it still picked DMA mode, but in the v4.9 it now always picks PIO mode. Also, PIO mode doesn't work, causing the following: / # echo 3 > /proc/sys/vm/drop_caches [ 3845.249237] sh (128): drop_caches: 3 / # /root/usr/lib/libc.so [ 3846.096070] do_page_fault(): sending SIGSEGV to libc.so for invalid read access from 7f9cb5a0 [ 3846.104758] epc = 779b0ea4 in libc.so[7792f000+c3000] [ 3846.109907] ra = 779a8004 in libc.so[7792f000+c3000] Segmentation fault / # /root/usr/lib/libc.so musl libc (mipsel-sf) Version 1.1.16-git-40-g54807d47 Dynamic Program Loader Usage: /root/usr/lib/libc.so [options] [--] pathname [args] (i.e. initial page-in of any binary causes a segfault, subsequent access works.) While this change doesn't fix PIO mode, it at least makes us deterministically use DMA (which works), and it also stops us from corrupting memory. Signed-off-by: André Draszik <git@andred.net>
* ramips: mt7620: eMMC: fix MODULE_DEVICE_TABLEAndré Draszik2018-04-041-1/+1
| | | | | | | This was referencing an undefined symbol, probably due to copy/paste error. Signed-off-by: André Draszik <git@andred.net>
* ramips: mt7620: eMMC: fix compiler warning (misleading indentation)André Draszik2018-04-041-4/+4
| | | | | | | | | | | drivers/mmc/host/mtk-mmc/sd.c:2782:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if ((hw->flags & MSDC_SDIO_IRQ) || (hw->flags & MSDC_EXT_SDIO_IRQ)) ^~ drivers/mmc/host/mtk-mmc/sd.c:2785:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' cd_active_low = !of_property_read_bool(pdev->dev.of_node, "mediatek,cd-high"); ^~~~~~~~~~~~~ Signed-off-by: André Draszik <git@andred.net>
* ramips: mt7620: eMMC: clear owner fieldAndré Draszik2018-04-041-2/+1
| | | | | | | a) This is not needed in recent kernels anymore (> 3.x ??) b) this allows driver unloading now Signed-off-by: André Draszik <git@andred.net>
* kernel: update kernel 4.14 to 4.14.32Hauke Mehrtens2018-04-031-3/+3
| | | | | | | | | | | | | The following patches are now included upstream: * 0052-MIPS-lantiq-fix-usb-clocks.patch * 0053-MIPS-lantiq-enable-AHB-Bus-for-USB.patch * 0060-lantiq-ase-enable-MFD-SYSCON.patch Closes: FS#1466 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* Kernel: bump 4.14 to 4.14.29Stijn Segers2018-03-234-10/+10
| | | | | | | | | | | | Right patch version this time, sorry! * Patch 180-usb-xhci-add-support-for-performing-fake-doorbell.patch had to be adjusted slightly because of upstream adapted code. * Refreshed patches. Compile-tested: ramips/mt7621, x86/64 Run-tested: ramips/mt7621, x86/64 Signed-off-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Rosen Penev <rosenp@gmail.com>
* kernel: bump 4.14 to 4.14.23Stijn Segers2018-03-021-2/+2
| | | | | | | | | | | | | This patch bumps the 4.14 kernel to .23. - Refreshed patches. - Deleted bcm53xx/patches-4.14/089-PCI-iproc-Fix-NULL-pointer-dereference-for-BCMA.patch. Has been accepted upstream. - Deleted generic/pending-4.14/821-usb-Remove-annoying-warning-about-bogus-URB.patch. The upstream URB code was changed, the patch no longer applies. I discussed this with the patch author and removed it for now, we'll see how it goes. Compile-tested on: ramips/mt7621, x86/64 Run-tested on: ramips/mt7621, x86/64 Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ramips: fix spurious IRQ7 events when using perf on 4.14Felix Fietkau2018-02-271-0/+15
| | | | | | | | | | | | | Upstream handling of MIPS CPU IRQs is rather hackish and the interrupts are being enabled unconditionally in various places because of legacy code. Performance counter events are routed both through the GIC and through legacy CPU IRQ7 events, causing spurious interrupts. Fix this by disabling IRQ7 when trying to access the performance counter IRQ. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: remove chunked-io patch and set spi->max_transfer_size insteadFelix Fietkau2018-02-244-184/+15
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix MT7621 PCI driver on 4.14Felix Fietkau2018-02-211-1/+1
| | | | | | The .map_irq hook can now be called after init. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.14 to 4.14.20Stijn Tintel2018-02-182-4/+4
| | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: - backport/080-v4.15-0001-arch-define-weak-abort.patch - backport/081-v4.15-0002-kernel-exit.c-export-abort-to-modules.patch Update patch that no longer applies: pending/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch Fixes CVE-2017-8824. Compile-tested: octeon, x86/64. Runtime-tested: octeon, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: preliminary support for 4.14Roman Yeryomin2018-02-1545-0/+18708
- removed upstreamed patches - 0901-spansion_nand_id_fix.patch is disabled, not clear if it's needed Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: John Crispin <john@phrozen.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 18:20:39 +0000