openwrt/upstream - upstream openwrt

	Commit message (Expand)	Author	Age	Files	Lines
*	ramips: update mtd patches to apply after changes from r43700	Rafał Miłecki	2014-12-15	1	-5/+4
*	kernel: refresh patches	Felix Fietkau	2014-12-08	1	-1/+1
*	kernel: update 3.14 to 3.14.18	Luka Perkov	2014-09-10	1	-1/+1
*	ralink: add 3.14 support	John Crispin	2014-08-07	1	-0/+13

/* * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #ifndef _MYLOADER_H_ #define _MYLOADER_H_ /* * Firmware file format: * * <header> * [<block descriptor 0>] * ... * [<block descriptor n>] * <null block descriptor> * [<block data 0>] * ... * [<block data n>] * * */ /* Myloader specific magic numbers */ #define MYLO_MAGIC_FIRMWARE 0x4C594D00 #define MYLO_MAGIC_20021103 0x20021103 #define MYLO_MAGIC_20021107 0x20021107 #define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 #define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 #define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 /* * Addresses of the data structures provided by MyLoader */ #define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ #define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ #define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ #define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ /* Vendor ID's (seems to be same as the PCI vendor ID's) */ #define VENID_COMPEX 0x11F6 /* Devices based on the ADM5120 */ #define DEVID_COMPEX_NP27G 0x0078 #define DEVID_COMPEX_NP28G 0x044C #define DEVID_COMPEX_NP28GHS 0x044E #define DEVID_COMPEX_WP54Gv1C 0x0514 #define DEVID_COMPEX_WP54G 0x0515 #define DEVID_COMPEX_WP54AG 0x0546 #define DEVID_COMPEX_WPP54AG 0x0550 #define DEVID_COMPEX_WPP54G 0x0555 /* Devices based on the Atheros AR2317 */ #define DEVID_COMPEX_NP25G 0x05e6 #define DEVID_COMPEX_WPE53G 0x05dc /* Devices based on the Atheros AR71xx */ #define DEVID_COMPEX_WP543 0x0640 /* Devices based on the IXP422 */ #define DEVID_COMPEX_WP18 0x047E #define DEVID_COMPEX_NP18A 0x0489 /* Other devices */ #define DEVID_COMPEX_NP26G8M 0x03E8 #define DEVID_COMPEX_NP26G16M 0x03E9 struct mylo_fw_header { uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ uint32_t crc; /* CRC of the whole firmware */ uint32_t res0; /* unknown/unused */ uint32_t res1; /* unknown/unused */ uint16_t vid; /* vendor ID */ uint16_t did; /* device ID */ uint16_t svid; /* sub vendor ID */ uint16_t sdid; /* sub device ID */ uint32_t rev; /* device revision */ uint32_t fwhi; /* FIXME: firmware version high? */ uint32_t fwlo; /* FIXME: firmware version low? */ uint32_t flags; /* firmware flags */ }; #define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ #define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ struct mylo_fw_blockdesc { uint32_t type; /* block type */ uint32_t addr; /* relative address to flash start */ uint32_t dlen; /* size of block data in bytes */ uint32_t blen; /* total size of block in bytes */ }; #define FW_DESC_TYPE_UNUSED 0 #define FW_DESC_TYPE_USED 1 struct mylo_partition { uint16_t flags; /* partition flags */ uint16_t type; /* type of the partition */ uint32_t addr; /* relative address of the partition from the flash start */ uint32_t size; /* size of the partition in bytes */ uint32_t param; /* if this is the active partition, the MyLoader load code to this address */ }; #define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, * MyLoader loads firmware from here */ #define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ #define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ #define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM * before decompression */ #define PARTITION_FLAG_LZMA 0x0100 /* the partition data compressed with LZMA */ #define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ #define PARTITION_TYPE_FREE 0 #define PARTITION_TYPE_USED 1 #define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the partition table */ struct mylo_partition_table { uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ uint32_t res0; /* unknown/unused */ uint32_t res1; /* unknown/unused */ uint32_t res2; /* unknown/unused */ struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; }; struct mylo_partition_header { uint32_t len; /* length of the partition data */ uint32_t crc; /* CRC value of the partition data */ }; struct mylo_system_params { uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ uint32_t res0; uint32_t res1; uint32_t mylo_ver; uint16_t vid; /* Vendor ID */ uint16_t did; /* Device ID */ uint16_t svid; /* Sub Vendor ID */ uint16_t sdid; /* Sub Device ID */ uint32_t rev; /* device revision */ uint32_t fwhi; uint32_t fwlo; uint32_t tftp_addr; uint32_t prog_start; uint32_t flash_size; /* Size of boot FLASH in bytes */ uint32_t dram_size; /* Size of onboard RAM in bytes */ }; struct mylo_eth_addr { uint8_t mac[6]; uint8_t csum[2]; }; #define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address in the board parameters */ struct mylo_board_params { uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ uint32_t res0; uint32_t res1; uint32_t res2; struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; }; #endif /* _MYLOADER_H_*/