aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/image
Commit message (Collapse)AuthorAgeFilesLines
* ramips: Add support for Wavlink WL-WN575A3Roger Pueyo Centelles2016-11-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug wireless router with the following specifications: - CPU: MediaTek MT7628AN 580MHz - Flash: 8MB - RAM: 64MB - Ethernet: 2x 10/100 Mbps (switched) - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm - Antennas: 4x external (2 per radio), non-detachable - LEDs: 4 programmable + LAN, WAN, POWER - Buttons: reset, WPS Flashing instructions: Factory U-boot launches a TFTP client if WPS button is pressed during power-on. Rename the sysupgrade file and configure a TFTP as follows: - Client (WL-WN575A3) IP: 192.168.10.101 - Server IP: 192.168.10.100 - Filename: firmware.bin Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ramips: fix Newifi D1 profileBangLang Huang2016-11-081-1/+1
| | | | | | the images were generated for the wrong flash size. Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* ramips: add support for MikroTik hEX v3 (RB750Gr3)Andrew Yong2016-11-021-0/+8
| | | | | | | | | | | | | | The MikroTik hEX v3 (RB750Gr3) is a MT7621AT board which is similar to most MT7621 reference designs, it can be easily supported by this patch; however, the stock RouterBOOT bootloader has to be replaced by a MT7621 SDK U-Boot such as https://github.com/ndoo/RB750Gr3-U-Boot - U-Boot configured for the RB750Gr3 (16MiB SPI flash, 256MiB DDR3 RAM at 1200MHz). RouterBOOT, the stock bootloader, does not initialize the UART and boots silently, making it preferable to replace it with a MT7621 SDK U-Boot with UART (57600 8N1) that supports HTTP, TFTP or serial upload of sysupgrade firmware and U-Boot. Furthermore, RouterOS, the stock firmware, is contained in a proprietary modification of SquashFS without GPL sources; UART is also disabled in stock firmware. The combination of LEDE firmware generated by this PR and MT7621 SDK U-Boot expects the printed MAC address to reside at offset `0xe000` of the factory partition (absolute offset is `0x4e000`); this is similar to the factory MAC address offset for several other MT7621 devices. A 16MiB flash dump suitable for use with flashrom will be provided if/once this patch is accepted and binaries are built by LEDE buildbot. Alternatively, writing the U-Boot to the SPI flash starting at 0x0 offset and booting the board with serial console attached will allow TFTP, HTTP or serial upload of sysupgrade firmware. Signed-off-by: Andrew Yong <me@ndoo.sg>
* ramips: add usb packages into DIR-860L B1 profileStijn Segers2016-11-021-0/+1
| | | | | | | This patch adds the kmod-usb3 and kmod-usb-ledtrig-usbport packages to the DIR-860L B1 profile. The DIR-860L B1 has a USB 3 port. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* ramips: Add RTC driver to kernel for working hctosysRosen Penev2016-10-311-2/+2
| | | | | | | Build the RTC driver into the kernel, (and remove the optional module), in order to make hctosys working. (Currently the module is loaded after hctosys has failed previously) Signed-off-by: Rosen Penev <rosenp@gmail.com>
* switch to the new usbport LED triggerRafał Miłecki2016-10-195-31/+31
| | | | | | | This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: add support for Planex VR500.YuheiOKAWA2016-10-151-0/+8
| | | | | | | | | | | | SOC: MT7621A RAM: 256MiB NOR: MX25L51245G Non Wireless Router. Issue: soft reboot problem. SPI Flash do not exit 4byte address mode. Signed-off-by: Yuhei Okawa <tochiro.srchack@gmail.com>
* ramips: use rootfs splitter and new image build code for BR-6475NDMathias Kresin2016-10-151-38/+11
| | | | | | | Use the edimax uImage splitter instead of the fixed size rootfs partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: move edimax images to the new build codeMathias Kresin2016-10-152-26/+30
| | | | | | | | | | | | | | | | Images installed via TFTP recovery or the Edimax webinterface of the 3g-6200n(l) are writting with the edimax header to flash. Use only one image type for these boards. The migration to the factory only images need to be done via TFTP recovery. Use the same start address for the 3g-6200n(l) factory images as the stock firmware images. Thanks to Jan Dostrasil for reporting all the issues of the 3g-6200nl and the patient testing of all changes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for Zyxel NBG-419N2 (WAP3205v2)Klaus2016-10-041-0/+8
| | | | | | | | | | | applied bb-final-ramips-add-zyxel-nbg-419n2.patch from 123serge123, found at https://yadi.sk/d/1ZV0lKJwbTE65; see https://forum.openwrt.org/viewtopic.php?pid=246905#p246905, modified slightly to fit to CC release and to new lede build system: image/rt305x.mk include file is used now changed NBG-419N2.dts format to fit style of other dts files Signed-off-by: Klaus <k-laus@quantentunnel.de>
* ramips: Add support for Phicomm K2 PSG1218Xuefu Lin2016-10-041-0/+7
| | | | | | | | | - CPU: MT7620A 580MHz - Flash: 8MB - RAM: 64MB - External PA+LNA on both WLAN2.4 and WLAN5 - 4x LAN ethernet and 1x WAN ethernet Signed-off-by: Xuefu Lin <xuefulin@gmail.com>
* ramips : add support for Newifi D1BangLang Huang2016-09-271-0/+8
| | | | Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* ramips : add support for PandoraBox D1BangLang Huang2016-09-271-0/+8
| | | | Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* ramips: Add support for ZBT-CPE102Cezary Jackiewicz2016-09-271-0/+7
| | | | | | | | | | - CPU: MT7620N 580MHz - Flash: 8MB - RAM: 64MB - build-in minipcie slot for modem 3G/4G - one ethernet port 10/100Mbps Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ramips: fix DEVICE_PACKAGES of Ubiquiti EdgeRouter XMatthias Schiffer2016-09-261-1/+1
| | | | | | | kmod-rt2x00-lib and kmod-mac80211 need to be removed, as they depend on kmod-cfg80211. kmod-rt2800-pci should not be installed anyways. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: fix wrong blocksizesMathias Kresin2016-09-152-2/+2
| | | | | | | | | | | | | | | | | | The D-Link DIR-860L B1 has a flash chip which doesn't support 4K sectors. Since the DIR-860L B1 was the only mt7621 board which had the 4k blocksize set, the 4K sector support is removed from the kernel config. I've checked the flash chips of all boards having set a 4K blocksize again. This time I searched harder to finding bootlogs instead of relying on wikis articles and/or the device tree source file. The Planex MZK-DP150N has an en25q32b instead of the mentioned one in the dts. Albeit the en25q32b supports 4K sectors, 4K support is not enabled in the driver. Change the blocksize for this board back to 64K. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: add KERNEL_SIZE to the default device varsMathias Kresin2016-09-131-1/+1
| | | | | This reverts commit ec37a565878fd79d4127cbb843c17ce3b8dc97c0 and fixes the underlying issue.
* build: drop UBI EOF marker from images by defaultFelix Fietkau2016-09-121-0/+1
| | | | | | | | Only add them where they are actually required. Should help with compatibility issues with stock U-Boot images that access UBI Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: set blocksize for remaining rt3883 devicesMathias Kresin2016-09-081-0/+4
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: remove old build code seama recipeMathias Kresin2016-09-031-32/+0
| | | | | | | Now that all seama images are using the new build code this seama recipe used with the old build code can be dropped. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: switch DIR-610 A1 to new image build codeMathias Kresin2016-09-081-3/+17
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: switch some rt3883 devices to new build codeMathias Kresin2016-09-031-25/+52
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: move seama build recipe to MakefileMathias Kresin2016-09-033-18/+9
| | | | | | | The identical build step is defined twice. Move it to the parent Makefile to use only one version. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: switch DIR-615 H1 to new image build codeMathias Kresin2016-09-021-11/+8
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add build recipe for senao headerMathias Kresin2016-08-171-0/+5
| | | | | | | Add it to the Makefile to allow a board which will be supported soon to use the recipe as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: set blocksize for 4MB devicesMathias Kresin2016-09-035-4/+39
| | | | | | | | | | | | | | | | | | | | | | | | Set the blocksize for devices having only 4MB of flash for ramips devices already using the new image build code. Informations about the used flash chip are gathered from the OpenWrt wiki, wikidevi, forums, OEM bootlogs or the compatible property in the device tree source file. The en25q32b from the AirLive Air3GII does not have 4k support in the kernel. For the following boards no information about the used flash chip could be found and a 64k blocksize is assumed: - Ralink V11ST-FE - Ralink AP-RT3052-V22RW-2X2 - MediaTek MT7628 EVB - MediaTek MT7621 EVB - UPVEL UR-326N4G - Buffalo WZR-AGL300NH Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: don't set the same max image size twiceMathias Kresin2016-09-043-50/+0
| | | | | | The ralink_default_fw_size_8M is already set for the default device. Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: specify max image size in Kilobyte/MegabyteMathias Kresin2016-09-044-41/+22
| | | | | | Use the k and m unit suffix to be consistent with the blocksize. Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: use k as unit suffix for blocksizeMathias Kresin2016-09-041-2/+2
| | | | | | | Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use lower case names for TEW-69xGR imagesMathias Kresin2016-09-091-4/+4
| | | | | | | Use lower case variant of the device name for to images to be consistent with all other images names. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix wrong TARGET_DEVICESMathias Kresin2016-09-081-1/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix wrong device titleMathias Kresin2016-09-081-1/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for Mercury MAC1200R v2Daniel Golle2016-09-091-0/+7
| | | | | | | | MT7628AN + MT7612E, 8MB SPI flash, 64MB DDR RAM reset button GPIO is still missing (anyone?) bootloader password is 'slp' Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: fix legacy initramfs imagesFelix Fietkau2016-09-031-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix build of TRENDnet TEW-69xGR imagesMathias Kresin2016-08-201-16/+20
| | | | | | | The image generation for TEW-691GR and TEW-692GR was broken since 79d02229 due to the move of the UMedia recipe to another Makefile. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: move umedia build step to MakefileMathias Kresin2016-08-202-4/+4
| | | | | | Some rt3883 based boards need this one as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix legacy image buildFelix Fietkau2016-08-111-4/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: Add support for Thunder TimecloudChuanhong Guo2016-08-101-0/+7
| | | | | | | Thunder Timecloud is a small NAS with MT7621A. It has 1 USB port and an SD Card slot. There is no wireless cards. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: Add support for TEW-714TRUJimmy Zhong2016-08-101-0/+6
| | | | Signed-off-by: Jimmy Zhong <mb300sd@mb300sd.net>
* ramips: updated remaining profiles to the new image building codeJohn Crispin2016-08-034-392/+1001
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* image: add a helper variable for getting kernel/rootfs from within image ↵Felix Fietkau2016-07-311-2/+2
| | | | | | Build/* templates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-291-1/+1
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: Add support for D-Link DCH-M225Michael Lee2016-07-111-0/+28
| | | | | | | | D-Link DCH-M225 is based on Mediatek MT7620 with 64MB ram, 8MB flash, 3.5mm audio out support. but no ethernet and usb ports. so you must default enable wifi. Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: Add support for the NixCore X1 ModuleL. D. Pinney2016-07-111-0/+13
| | | | | | | | | The NixCore X1 is a Ralink/MediaTek rt5350 WiFi Module. http://nixcores.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Drew Gaylo <drew@nixcores.com>
* ramips: fix build error in ubnt-erx initramfs factory imageFelix Fietkau2016-07-062-4/+5
| | | | | | | Build initramfs kernel image, but skip factory image if initramfs size is too big. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix up switch settings for Sitecom WL-351 v1 002John Crispin2016-07-031-1/+0
| | | | | | | | | Pinmux for rgmii needs to be set to rgmii, not gpio. Hide the ESW switch on boot (using new rgmii esw devicetree attribute). Also add a Sitecom-specific profile, since the image needs to include the rtl8366 kernel driver. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
* ramips: add suport for ZBT APE522IIRoger Pueyo Centelles2016-06-221-0/+8
| | | | | | | | | The ZBT APE522II is a dual-radio outdoor CPE based on the MT7620a SoC. It has 64 MB RAM, 8 MB flash, 2 Fast Ethernet ports via internal switch (one with 802.3af 48V PoE support), a 802.11b/g/n SoC 2.4 GHz radio and an 802.11a/n/ac MT7612E-based 5 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ramips/image: Add Archer C50 to mt7620 MakefileHenryk Heisig2016-06-131-0/+9
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: add support for DuZun DM06Michael Lee2016-06-131-0/+8
| | | | | | | | DuZun DM06 is a develop board based on mt7628 64M RAM, 8M SPI Flash, 1 WAN, 1 LAN. wm8960 codec with line out, line in and speaker output. Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: fix Netgear EX2700 imagesJoseph C. Lehner2016-06-051-3/+3
| | | | | | | Calling `cat foo bar | dd ... conv=sync` *may* add extraneous padding. Avoid this. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-15 13:23:49 +0000