aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/image
Commit message (Collapse)AuthorAgeFilesLines
* ramips: unbreak rt2880 supportJohn Crispin2013-05-061-3/+0
| | | | | | Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36559
* ramips: introduce DTS for ALL5003John Crispin2013-04-251-0/+2
| | | | | | | | | | | | | Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36435
* ramips: Add Alpha ASL-26555 support.John Crispin2013-04-251-0/+13
| | | | | | | | | | | | | | | | This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36433
* ramips: Add support of D-link DIR-620D1John Crispin2013-04-251-0/+2
| | | | | | | Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36432
* fix prepare_generic_squashfsJohn Crispin2013-04-171-4/+0
| | | | | | | | prepare_generic_squashfs was called twice on the generated images breaking mount_root Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36349
* fix RT-N15 supportJohn Crispin2013-04-121-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36325
* Add Netgear WNCE2001 (OF version)John Crispin2013-04-091-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36289
* add profile for tenda w150m boardJohn Crispin2013-04-031-0/+3
| | | | | | | | http://patchwork.openwrt.org/patch/3371/ Signed-off-by: Chi Zhang <zhangchi866@gmail.com> SVN-Revision: 36176
* Build WW factory image for DAP-1350John Crispin2013-04-031-10/+13
| | | | | | | | http://patchwork.openwrt.org/patch/3466/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36174
* add Huawei D105John Crispin2013-04-031-0/+3
| | | | | | | | http://patchwork.openwrt.org/patch/3510/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 36173
* add profile for the Edimax 3g-6200NL boardJohn Crispin2013-04-031-1/+4
| | | | | | | | http://patchwork.openwrt.org/patch/3214/ Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net> SVN-Revision: 36172
* add new image/MakefileJohn Crispin2013-04-031-526/+277
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36169
* ramips: add profile and build image for the Upvel UR-326N4G boardGabor Juhos2013-03-111-0/+4
| | | | | | | Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35972
* ramips: image: don't break make process if mkimage command failsGabor Juhos2013-02-251-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35800
* ramips: print image build warnings/errors to stderrJonas Gorski2013-02-211-6/+6
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35721
* ramips: build image for the Omnima EMB HPM boardGabor Juhos2013-02-021-0/+16
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35468
* ramips: add profile and build image for the Tenda 3G300MGabor Juhos2013-01-191-0/+6
| | | | | | | | | | | | Factory image should be used to flash from original firmware. [juhosg: use the GENERIC_4M template] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35246
* ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0Gabor Juhos2013-01-191-23/+3
| | | | | | | | | | | | | | | | | | These targets need custom image names specified in the uImage header. MkImage accepts an optional 4th argument to do exactly that. Reuse the facility to generate factory images. Compile-tested, the generated files inspected with "file" utility. [juhosg: - keep the factory.bin images to avoid users confusion, - use GENERIC_4M template for the W306R V2.0 - update commit log] Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35243
* ramips: allow to override image name/suffix in GENERIC_{4,8}M macrosGabor Juhos2013-01-191-4/+5
| | | | | | | | | Sysupgrade/KRuImage and BuildFirmware/Generic macros are changed as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35242
* ramips: do not stop the build if some targets failGabor Juhos2013-01-191-4/+4
| | | | | | | | | | This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35238
* adds support for Edimax BR-6524NJohn Crispin2013-01-061-0/+10
| | | | | | | | fixes #12754 Signed-off-by: <rq@akl.lt> SVN-Revision: 35020
* ramips: build firmware image for the Planex MZK-W300NH2 RouterGabor Juhos2012-12-291-0/+20
| | | | | | | | Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34927
* ramips: build image for Airlive AIR3GIIGabor Juhos2012-12-291-0/+5
| | | | | | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34924
* add support for Hauppauge BroadwayJohn Crispin2012-12-101-0/+21
| | | | | | | | | | | This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway platform. It doesn't deal with the TV tuner or transcoder at this point, but the core functionality is working (Ethernet, wireless, USB, buttons, LEDs, etc). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> SVN-Revision: 34595
* ramips: fix serial console for Belkin F5D8235 v1/v2Gabor Juhos2012-12-021-1/+1
| | | | | | | | Based on a patch from #12533. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34445
* ramips: rt305x: add profile and build image for the Asus RT-N13UGabor Juhos2012-11-291-0/+9
| | | | | | | Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34407
* previous commit pushed 1 file too many ;)John Crispin2012-11-121-3/+3
| | | | SVN-Revision: 34179
* move ethernet hw init to init/uninit functionsJohn Crispin2012-11-121-3/+3
| | | | | | | | | This should fix the stalled irq problem seen by several people. This is not the real fix, but rather moves the bug to the un/init patch of the driver. The real bug still needs to be fixed, but this workaround should be suffcient to make the ethernet stable. SVN-Revision: 34177
* ramips: add profile and build image for the TEW-691GR boardGabor Juhos2012-10-181-0/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33852
* ramips: add profile and build image for the TEW-692GR boardGabor Juhos2012-10-181-0/+18
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33849
* ramips: add profile and build image for the DIR-645 boardGabor Juhos2012-10-181-0/+45
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33845
* ramips: add image for ALL0256N-8MGabor Juhos2012-10-041-0/+1
| | | | | | | | | | | | The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB. In order to expose the whole amount of flash, add another image which contains the corresponding GENERIC_8M mtdparts. [juhosg: change suffix from '8m' to '8M'] Patch by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33614
* ramips: Add support for 8devices Carambola dev board.Gabor Juhos2012-08-291-0/+5
| | | | | | | | | | | | Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33303
* ramips: fix board parameter for the NBG-419N (#12061)Gabor Juhos2012-08-221-1/+1
| | | | SVN-Revision: 33229
* ramips: add board alias for the ALL0239-3GGabor Juhos2012-08-171-0/+21
| | | | | | | | | | | | | | Generate image for the ALL0239-3G which can be flashed through the chipset-vendor SDK based firmware's web-interface and bootloader. The bootloader seems to ignore uImage checksum errors, but does complain about them once the 0xDEADC0DE was replaced by an actual JFFS2 page. I'm working on implementing fixtrx for uImage in the mtd package to solve this. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33206
* ramips: add support for D-Link DIR-615 H1Gabor Juhos2012-08-171-0/+16
| | | | | | | | | | | | rt2x00 still needs some patching as the radio doesn't come to life. Installation via webflash. [juhosg: fix whitespace issues, remove rt305x_register_usb from machine setup because the board has no USB port] Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> SVN-Revision: 33205
* ramips: provide means to specify custom "image name" for uImages, use for ↵Gabor Juhos2012-08-121-4/+5
| | | | | | | | | | | DIR-620 D-Link's DIR-620 allows to flash a uImage directly from its web-interface but for that the image name should be set to DIR_620. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33143
* ramips: add D-Link DIR-620 A1 supportGabor Juhos2012-08-121-0/+12
| | | | | | | | | | | | Full functionality runtime tested, installation via OEM web-interface requires a follow-up patch. Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing bits (including the antiparallel wps led). Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33142
* D-Link DAP-1350 initial supportJohn Crispin2012-07-241-0/+19
| | | | | | | | | The initial support for the D-Link DAP-1350. USB related functionality is not tested. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32821
* add image build for ALL5002John Crispin2012-07-241-0/+14
| | | | | | | | add image build for ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32814
* ramips: rt305x: add support for Edimax 3G-6200NGabor Juhos2012-07-121-0/+10
| | | | | | | | Support for Edimax 3G-6200N router with USB. Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com> SVN-Revision: 32682
* ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA RouterGabor Juhos2012-06-191-0/+5
| | | | | | | | | | This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router. The platform is based on Ralink RT3052. http://wiki.openwrt.org/toh/petatel/psr-680w Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru> SVN-Revision: 32450
* ramips: W306R V2.0 - GPIO and Network fixesGabor Juhos2012-05-021-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by removing a line(default is correct), and reversed the Lan/wan layout LLLLW to WLLLL. Added: image/Makefile now builds -factory.bin files. I am unsure of the accepted way to change the makefile but the name of the image needs to be 'linkn Kernel Image' in order to be accepted by the OEM firmware. Known issue: eth0 (internal switch i think has mac address: 00:11:22:33:44:55 but i think it should be same as the lan). Known issue: Pressing the reset button has no noticable effect, i would expect the router to boot failsafe if being pressed on boot, reboot if short press and reset all to default if long press. [juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead] Signed-off-by: David Pearce <david_18051985@hotmail.com> SVN-Revision: 31557
* ramips: Make serial console for DIR-300-B1 work againGabor Juhos2012-05-021-2/+2
| | | | | | | | | | | | | | | | | Make serial console for DIR-300-B1 work again. With some recent change, "console=ttyS1,57600" was removed from the default kernel command line, this adds the necessary mkcmdline incantation to image/Makefile to add it there for this target. This is quite likely broken for other targets as well. Without this the console switches to ttyS0 instead of ttyS1 and kernel output is missing, and the userspace comes up with 9600 baud instead of 57600. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 31556
* ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UNGabor Juhos2012-04-291-1/+1
| | | | | | Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> SVN-Revision: 31507
* ramips: rt305x: add support for the UR-336UN boardGabor Juhos2012-04-231-0/+5
| | | | | | Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> SVN-Revision: 31451
* ramips: rt305x: add support for the Asus WL-330N3G boardGabor Juhos2012-04-231-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the ASUS WL-330N3G Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led. The bi-color led is driven by 2 gpio. I don't know how to handle this, so I simply made 2 leds : one red, one blue. But the red light takes precedence over the blue one according to the chart below. r = led is red b = led is blue 0 = led is off xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness initial state action led gpio state r0 b0 r0->r1 r r0 b0 r0 b0 b0->b1 b r0 b1 r1 b0 r1->r0 0 r0 b0 r1 b0 b0->b1 r r1 *b1* r1 b1 r1->r0 b r0 b1 r1 b1 b1->b0 r r1 b0 r0 b1 r0->r1 r r1 *b1* r0 b1 b1->b0 0 r0 r0 Signed-off-by: Frédéric Leroy <fredo@starox.org> SVN-Revision: 31450
* ramips: rt3883: add profile and build sysupgrade image for the RT-N56UGabor Juhos2012-04-211-0/+13
| | | | SVN-Revision: 31399
* ramips: build initramfs image for the Fonera 2.0NGabor Juhos2012-04-211-0/+4
| | | | SVN-Revision: 31397
* ramips: rt305x: add initial support for Tenda W306R V2.0Gabor Juhos2012-04-211-0/+5
| | | | | | | | | | More device info at: http://wiki.openwrt.org/toh/tenda/w306r Signed-off-by: David Pearce <David_18051985@hotmail.com.au> [juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages from the profile, change broken GPIO number] SVN-Revision: 31396