aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/files
Commit message (Collapse)AuthorAgeFilesLines
...
* ramips: remove interrupt coalescing, it is unnecessary with napi polling and ↵Felix Fietkau2015-01-137-78/+40
| | | | | | | | could reduce throughput Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43952
* ramips: disable ethernet checksum offloads for mt7621, they are brokenFelix Fietkau2015-01-021-1/+10
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43811
* ramips: use netif_receive_skb instead of napi_gro_receive when rx csum ↵Felix Fietkau2015-01-021-1/+4
| | | | | | | | offload is unavailable Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43810
* ralink: fix tx vlan offload and hardware statusJohn Crispin2014-11-192-27/+40
| | | | | | | | | | | | | hardware status and tx vlan offload support on all targets except rt5350. so i modify the IS_ENABLE condition only for mt7621. support mt7621 hardware status reference by SDK. but i don't have mt7621. if not work just set mt7621 FE_REG_FE_COUNTER_BASE to 0 to let software count. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43303
* ralink: support netconsoleJohn Crispin2014-11-191-0/+15
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43302
* ralink: improve tx vlan offloadJohn Crispin2014-11-192-0/+55
| | | | | | | | | | | hardware tx vlan offload only support max 16 vids now use add/delete vlan interface to update vlan id table when duplicate vlan id index detect. disable hardware tx vlan offload support. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43301
* ralink: update ethernet driver to use new ralink_soc variableJohn Crispin2014-11-142-42/+7
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43247
* ralink: fix the 10mbit bug on mt7621John Crispin2014-11-141-1/+1
| | | | | | | | a missing "val =" caused the AN bit in the phy0 reg to be flushed. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43246
* ralink: improve mt7530 supportJohn Crispin2014-11-141-2/+16
| | | | | | | | the SDK does a bit of extra init that we did not do yet when using an external mt7530. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43245
* ralink: mt7621 has a different base addr for PVIDJohn Crispin2014-11-141-1/+19
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43243
* ralink: add support for mt7621 ethernetJohn Crispin2014-11-128-36/+334
| | | | | | | | somehow all switch ports still come up as 10mbit. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43237
* ralink: fix mdio polling of external phys if only 1 phy existsJohn Crispin2014-11-111-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43235
* ralink: mt7628 does not actually need this fix for the ethernet driverJohn Crispin2014-11-071-3/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43206
* ralink: improve r43200John Crispin2014-11-061-5/+8
| | | | | | | | | r43200 tries to detect if the fixup is needed or not. control the behaviour via OF instead and disable unused ports. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43201
* ralink: only apply ephy1 fixup if the phy is presentJohn Crispin2014-11-061-35/+40
| | | | | | | | this broke e1700 lan2 as the fixup was applied to the phy inside the mt7530. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43200
* ralink: add mt7628 support to the ethernet driverJohn Crispin2014-11-062-1/+85
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43196
* ralink: cleanup ethernet Makefile/KconfigJohn Crispin2014-11-062-9/+34
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43195
* ralink: move ethernet driver to files/John Crispin2014-11-0621-0/+5900
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43194
* ralink: refresh patchesJohn Crispin2014-03-1811-4853/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39949
* ralink: add xhci driverJohn Crispin2014-01-1911-0/+4853
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39328
* move files to files-3.7John Crispin2013-04-03144-39274/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36161
* ramips: add kernel support for the Upvel UR-326N4G boardGabor Juhos2013-03-114-0/+109
| | | | | | | | | [juhosg: add missing symbols to config-3.{7,8}] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35970
* ramips: indicate support for ALL5003Gabor Juhos2013-03-031-1/+1
| | | | | | | | | | | add ALL5003 to board description in mach-all5002.c adapt detection in user-space accordingly (no functional changes) Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35851
* ramips: remove port_power_off field from ehci_platform_dataGabor Juhos2013-02-252-2/+0
| | | | | | | | It is removed in 3.8. Also add a revert patch for 3.7. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35799
* ramips: remove __dev_{init,exit} annotationsGabor Juhos2013-02-252-5/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35798
* ramips: rt3883: add kernel support for the Omnima EMB HPM boardGabor Juhos2013-02-024-0/+164
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35466
* ramips: add kernel support for the Edimax BR-6425 boardGabor Juhos2013-02-024-0/+85
| | | | | | | Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35462
* fix for non-blinking LAN LEDsJohn Crispin2013-01-281-0/+4
| | | | | | https://dev.openwrt.org/ticket/12830 SVN-Revision: 35359
* ramips: add kernel support for the Tenda 3G300MGabor Juhos2013-01-194-0/+133
| | | | | | | | | | | | Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons and seven leds. Factory image should be used to flash from original firmware. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35244
* adds support for Edimax BR-6524NJohn Crispin2013-01-064-0/+81
| | | | | | | | fixes #12754 Signed-off-by: <rq@akl.lt> SVN-Revision: 35020
* rt5350 switch support fixJohn Crispin2013-01-021-1/+5
| | | | | | | | RT5350 frame engine need reset frame engine and embedded switch together. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 34969
* ramips: rt305x: fix garbled name in mach-mzk-w300nh2.cGabor Juhos2012-12-301-1/+1
| | | | | | | Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34934
* ramips: rt305x: add kernel support for the Planex MZK-W300NH2 RouterGabor Juhos2012-12-294-0/+101
| | | | | | | | | | | | | | | | | | | | This is a Japanese market router, for details check http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB RAM, but base OpenWRT install worked fine for days without issues. Even an image with built-in Luci worked, but don't expect smooth experience, due to the lack of RAM. Wifi was not extensively tested, but seems it is working. GPIO LEDs & buttons, factory flash image and switch config are confirmed working. Tested against revision 34882 + this patch. [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34925
* ramips: rt305x: add kernel support for AirLive AIR3GIIGabor Juhos2012-12-294-1/+104
| | | | | | | | | | | | | | | | | | | | | | | AirLive AIR3GII is Ralink RT5350F based device with 100Mbps switch, USB port, 4MB flash and 32MB ram. Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade Does not work: wifi (chip RT5350), reset button [ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected. [ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. Other problem: LAN leds is reverse (lights when not cable connected and vice versa) [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34922
* ramips: unify eeprom file name for the built-in wireless MACGabor Juhos2012-12-223-3/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34860
* ramips: rt3883: fix build errorGabor Juhos2012-12-221-1/+1
| | | | | | | | The cpuport_cfg field has been renamed to port0_cfg. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34859
* ramips: convert to use {e,o}hci-platform driverGabor Juhos2012-12-226-462/+98
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34843
* ramips: Add USB support for DAP-1350 platform.Gabor Juhos2012-12-201-0/+1
| | | | | | | | | It seems to work as intended, but only lightly tested. Patch-by: Bryan Steele <brynet@gmail.com> SIgned-off-by: Gabor Juhos <juhsog@openwrt.org> SVN-Revision: 34811
* add support for Hauppauge BroadwayJohn Crispin2012-12-104-0/+94
| | | | | | | | | | | This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway platform. It doesn't deal with the TV tuner or transcoder at this point, but the core functionality is working (Ethernet, wireless, USB, buttons, LEDs, etc). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> SVN-Revision: 34595
* ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 RouterGabor Juhos2012-11-294-0/+90
| | | | | | | | | | | | | | | | | | The work has been backported from openwrt-dreambox with some modifications & code cleanup. * updated config-3.3 * updated config-3.6 * renamed rt-n13 to rt-n13u * fixed mach-rt-n13u.c [juhosg: move user-space support and image generation into separate patches] Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34405
* ramips: ramips_eth: use Kconfig definition to enable debugGabor Juhos2012-11-251-1/+1
| | | | | | | | | | The Kconfig identifier to enable debugging in the driver was different from the actually used one. Fix that. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34332
* ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350Gabor Juhos2012-11-202-0/+10
| | | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34270
* move ethernet hw init to init/uninit functionsJohn Crispin2012-11-121-17/+29
| | | | | | | | | This should fix the stalled irq problem seen by several people. This is not the real fix, but rather moves the bug to the un/init patch of the driver. The real bug still needs to be fixed, but this workaround should be suffcient to make the ethernet stable. SVN-Revision: 34177
* ramips: add HAVE_CLK to Kconfig on all ramips socsJohn Crispin2012-11-071-0/+3
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34110
* ramips: enable USB power on the DIR-645Gabor Juhos2012-11-051-0/+5
| | | | | | | | Closes #12422. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34082
* ramips: use correct key code for the RFKILL switch on the TEW-691GRGabor Juhos2012-10-261-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33943
* ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GRGabor Juhos2012-10-192-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33864
* ramips: rt3883: add initial support for the TRENDnet TEW-691GR boardGabor Juhos2012-10-184-1/+110
| | | | | | | | No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33850
* ramips: rt3883: add initial support for TRENDnet TEW-692GR boardGabor Juhos2012-10-184-0/+156
| | | | | | | | No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33846
* ramips: rt3883: add inital support for the DIR-645 boardGabor Juhos2012-10-184-1/+155
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33843
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 13:58:27 +0000