aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/files-4.14
Commit message (Collapse)AuthorAgeFilesLines
* ramips: implement vlan rx offload on MT7621Felix Fietkau2019-04-033-4/+11
| | | | | | Avoids the overhead of software VLAN untagging in the network stack Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: allow packets with ttl=0Felix Fietkau2019-03-241-2/+2
| | | | | | | Some broken ISPs (e.g. Comcast) send DHCPv6 packets with hop limit=0. This trips up the TTL=0 check in the PPE if enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix two-way hash and auto ageout on MT7621HsiuWen Yen2019-01-231-17/+18
| | | | | | | | | | | | | | | | | | | | | | | | Current code directly writes the FOE entry to hash_val+1 position when hash collision occurs. However, it is found that this behavior will cause the cache and the hardware FOE table to be inconsistent. For example, there are three flows, and their hashed values are all equal to 100. The first flow is written to the position of 100. The second flow is written to the position of 100+1. Then, the logic of the current code will also write the third flow to 100+1. At this time, the cache has flow 1 and 2; and the hardware FOE table has flow 1 and 3, where these two parts store different contents. So it is necessary to check whether the hash_val+1 is also occupied before writing. If hash_val+1 is also occupied, we won’t bind th third flow to the FOE table. Addition to that, we also cancel the processing of foe_entry removal because the hardware has auto age-out ability. The hardware will periodically iterate through the FOE table to find out the time-out entry and set it as INVALID. Signed-off-by: HsiuWen Yen <y.hsiuwen@gmail.com>
* ramips: whitespace cleanup inside hnat driverJohn Crispin2019-01-071-6/+8
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: add two-way hashing scheme for MT7621HsiuWen Yen2019-01-071-0/+11
| | | | | | | | | | Sometimes the tuples might be hashed to the same FOE entry. When this hash collision problem occurs, some of the connections will not be bound and consequently the CPU idle rate cannot reach 100%. Therefore, two-way hashing is adopted to alleviate this problem. Signed-off-by: HsiuWen Yen <y.hsiuwen@gmail.com>
* ramips: mt7620: add force use of mdio-modePawel Dembicki2018-11-261-0/+3
| | | | | | | | Some boards have external switches different than mt7530. This patch allow to use mdio-mode without 0x1f register. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ramips: drop obsolete sd card driver codeMathias Kresin2018-09-062-20/+4
| | | | | | | | | | | | | | | | | The pinmux for all SoCs using this driver is now set via the pinmux. It makes this code obsolete. Some of the code targeting the mt76x8 SoCs is still required. The sd card pins share the pads with the EPHY. These pads need to be switched to digital mode if the pins are used for sd cards. The eMMC 8-bit mode has to be enabled via pinmux instead of a kernel option. The uart2 group need to be set to function "sdxc d5 d4", pwm1 to "sdxc d6" and pwm0 to "sdxc d7" to do so. It can't be done by as part of a default pinmux, as it would break the normal operation of uart2. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: ethernet: unify tx descriptor buffer splittingFelix Fietkau2018-09-031-75/+83
| | | | | | | | A buffer is split into multiple descriptors if it exceeds 16 KB. Apply the same split for the skb head as well (to deal with corner cases on fraglist support) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "ramips: mmc: Fix init for MT7628AN"Jo-Philipp Wich2018-08-302-16/+1
| | | | | | | | | | This reverts commit 3a8efaef00d6b7317c46fe6b7e923912d8bf3500. The change reportedly breaks UART2 on some boards. Furthermore it uses bitwise logic on an uninitialized variable and fails to explain what it is fixing exactly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: mt7620: fix bad indentMathias Kresin2018-08-161-7/+6
| | | | | | | Fix the indent to make the make it obvious which condition is the parent of the loop. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: mt7620: enable all ports unconditionallyPawel Dembicki2018-08-151-1/+10
| | | | | | | This patch make all mt7620 ephy ports turned on. It is necessary for some JBOOT devices. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mt7620: gsw: make IntPHY and ExtPHY share mdio addr 4 possibleChen Minqiang2018-08-061-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | To share mdio addr for IntPHY and ExtPHY, as described in the documentation (MT7620_ProgrammingGuide.pdf). (refer: http://download.villagetelco.org/hardware/MT7620/MT7620_ProgrammingGuide.pdf) when port4 setup to work as gmac mode, dts like: &gsw { mediatek,port4 = "gmac"; }; we should set SYSCFG1.GE2_MODE==0x0 (RGMII). but SYSCFG1.GE2_MODE may have been set to 3(RJ-45) by uboot/default so we need to re-set it to 0x0 before this changes: gsw: 4FE + 2GE may not work correctly and MDIO addr 4 cannot be used by ExtPHY after this changes: gsw: 4FE + 2GE works and MDIO addr 4 can be used by ExtPHY Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* ramips: fix gigabit switch PHY access on MDIODaniel Gimpelevich2018-08-061-1/+2
| | | | | | | | | | When PHY's are defined on the MDIO bus in the DTS, gigabit support was being masked out for no apparent reason, pegging all such ports to 10/100. If gigabit support must be disabled for some reason, there should be a "max-speed" property in the DTS. Reported-by: James McKenzie <openwrt@madingley.org> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* ramips: remove superfluous & confusing DT bindingDaniel Gimpelevich2018-08-061-3/+24
| | | | | | | | | | | Mediatek has a reference platform that pairs an MT7620A with an MT7530W, where the latter responds on MDIO address 0x1f while both chips respond on 0x0 to 0x4. The driver special-cases this arrangement to make sure it's talking to the right chip, but two different ways in two different places. This patch consolidates the detection without the current requirement of both tests to be separately satisfied in the DTS. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* ramips: mmc: Fix init for MT7628ANLoveSy2018-07-302-1/+16
| | | | | | | | There is another thing about crc to do when initialize SD card on MT7628. This commit is to fix this init issue. Signed-off-by: LoveSy <shana@zju.edu.cn>
* ramips: ethernet: disable fraglist supportFelix Fietkau2018-07-141-1/+1
| | | | | | | The code has some remaining issues that cause ethernet hangs, so disable it for now until we can get it fixed Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: ethernet: use own page_frag_cacheFelix Fietkau2018-07-122-3/+15
| | | | | | | | | | | | | | | | Using the NAPI or netdev frag cache along with other drivers can lead to 32 KiB pages being held for a long time, despite only being used for very few page fragment. This can happen if the ethernet driver grabs one or two fragments for rx ring refill, while other drivers use (and free up) the remaining fragments. The 32 KiB higher-order page can only be freed once all users have freed their fragments, which only happens after the rings of all drivers holding the fragments have wrapped around. Depending on the traffic patterns, this can waste a lot of memory and look a lot like a memory leak Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: ethernet: use skb_free_frag to free fragmentsFelix Fietkau2018-07-121-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: improve ethernet driver performance with GRO/TSOFelix Fietkau2018-06-193-76/+105
| | | | | | | | | | | GRO stores packets as fraglist. If they are routed back to the ethernet device, they need to be re-segmented if the driver does not support sending fraglists. Add the missing support for that, along with a missing feature flag that allows full routed GRO->TSO offload. Considerably reduces CPU utilization for routing Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mt7621: fix mtu setting with kernel 4.14Mathias Kresin2018-06-161-11/+7
| | | | | | | | | | Since kernel 4.10 commit 61e84623ace3 ("net: centralize net_device min/max MTU checking"), the range of mtu is [min_mtu, max_mtu], which is [68, 1500] by default. It's necessary to set a max_mtu if a mtu > 1500 is supported. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: rename ethernet driver folder to the same one that upstream usesFelix Fietkau2018-06-1326-0/+0
| | | | | | | Preparation for sharing offload code with the mediatek target through generic files/ Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mmc: Add back some non-mt7621 code that staging removedRosen Penev2018-06-081-1/+17
| | | | | | | | | | This reverts commit 8a570921b5ba49a2d3824f1220e4c53809063468. This seems to have been accidentally reverted. This fixes mt7620 and mt7628. Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Daniel Golle <daniel@makrotopia.org>
* Revert "ramips: Move PCI driver to files directory"John Crispin2018-06-011-836/+0
| | | | | | This reverts commit a098a78a33a6b096d15c9982b5d6457988e09f03. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: Remove redundant owner assignment"John Crispin2018-06-011-0/+1
| | | | | | This reverts commit 2ad4daf5794b08878467c1dac5bef7487109e4da. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: improve interrupt mapping"John Crispin2018-06-011-9/+65
| | | | | | This reverts commit 5f7396ebef09b224edf08b0bda113613a42f0928. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: remove conditional compilation."John Crispin2018-06-011-8/+58
| | | | | | This reverts commit 1f786257147f978ce4c5750fdc404851453fafcb. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: remove unnecessary resource details."John Crispin2018-06-011-2/+15
| | | | | | This reverts commit edea934799911c54ffa7024ef9a650f9dfc8c695. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: pci: sync with staging driver"John Crispin2018-06-011-150/+168
| | | | | | This reverts commit e07baec9faf487fd143976636025b5da55e13c20. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: Add back some non-mt7621 code that staging removed"John Crispin2018-06-011-17/+1
| | | | | | This reverts commit 048e41f6496697863cc7d73ab95fa89a6ddf2470. Signed-off-by: John Crispin <john@phrozen.org>
* ramips: Add back some non-mt7621 code that staging removedRosen Penev2018-05-241-1/+17
| | | | | | Staging is meant only for mt7621 but for OpenWrt more is needed. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: mmc: Sync with staging driverRosen Penev2018-05-185-3417/+2693
| | | | | | | | | | | | | | Mostly whitespace cleanups. Some unneeded code was removed. MMC init was also moved to the probe function as in 6069bdd The cleanup commits are over 100, making it hard to do them individually. Tested on GnuBee PC1 with an SD card being used as swap. Signed-off-by: Rosen Penev <rosenp@gmail.com> v2: Fixed compile issue with mt7620
* Revert "ramips: mmc: Sync with staging drivers"John Crispin2018-05-155-2693/+3418
| | | | | | This reverts commit 2d401925b9bdf34de800fff57f593a3665de2a6a. Signed-off-by: John Crispin <john@phrozen.org>
* staging: mt7621-eth: fix return value check in mt7621_gsw_probe()Wei Yongjun2018-05-153-6/+6
| | | | | | | | | | In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: f079b6406348 ("staging: mt7621-eth: add gigabit switch driver (GSW)") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* staging: mt7621-eth: fix return value check in mtk_connect_phy_node()Wei Yongjun2018-05-151-2/+2
| | | | | | | | | | In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: e3cbf478f846 ("staging: mt7621-eth: add the drivers core files") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* staging: mt7621-eth: fix return value check in mtk_probe()Wei Yongjun2018-05-151-1/+1
| | | | | | | | | | In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: e3cbf478f846 ("staging: mt7621-eth: add the drivers core files") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: pci: sync with staging driverRosen Penev2018-05-151-168/+150
| | | | | | | | | | This is an amagalmation of two upstream commits dealing with whitespace and dead code removal. I'm synching instead of having two separate commits as they go out of order compared to previous commits here. Tested on GnuBee PC1. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: mmc: Sync with staging driversRosen Penev2018-05-155-3418/+2693
| | | | | | | | | | | | | Mostly whitespace cleanups. Some unneeded code was removed. MMC init was also moved to the probe function as in 6069bdd0871a20b5adce8d2f677946e05a2da609 The cleanup commits are over 100, making it hard to do them individually. Tested on GnuBee PC1 with an SD card being used as swap. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: remove unnecessary resource details.NeilBrown2018-05-141-15/+2
| | | | | | | | These resources are extracted from devicetree, so they aren't needed here. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: remove conditional compilation.NeilBrown2018-05-141-58/+8
| | | | | | | | | | | | | Code currently defines: and then compiles code only if they are defined. We might want to disable some of these via devicetree one day, but for now just remove the #defines and the conditions - all the code for different ports is easy to identify. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: improve interrupt mappingNeilBrown2018-05-141-65/+9
| | | | | | | | | | | | | | As the Interrupts for the PCI adapters are listed in devicetree we shouldn't need to have them explicit in the code. The simplest way to do this is to use of_irq_parse_and_map_pci() and specify an interrupt-map which identifies the different PCI hosts by bus/slot numbers. This has the advantage that the hwirq number are mapped to virq numbers for us, so the ugly hack can go. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: Remove redundant owner assignmentChristian Lütke-Stetzkamp2018-05-141-1/+0
| | | | | | | | | Remove the owner assignment form the platform driver as platform_driver_register() already initializes the owner. Found using coccinelle. Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: Move PCI driver to files directoryRosen Penev2018-05-141-0/+836
| | | | | | This will make it easier to port upstream code. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: move mtk-mmc init to probe function to avoid breaking NAND flashFelix Fietkau2018-05-081-36/+28
| | | | | | | The driver messes with the pin control settings - MMC and NAND are mutually exclusive Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix locking issues in the ethernet driverFelix Fietkau2018-04-171-2/+3
| | | | | | | The stats update needs to protect against being interrupted by a tasklet The u64 stats seqlock needs to be initialized Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add missing unlock in fe_phy_link_adjustFelix Fietkau2018-04-141-0/+1
| | | | | | Based on patch by Neil Brown Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix build error caused by missing ifdef guard in hwnat codeJohn Crispin2018-04-061-1/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: implement hardware NAT offload for MT7621John Crispin2018-04-067-3/+975
| | | | | | | | | | Supports IPv4 flow offloading on MT7621 for Routing, SNAT and DNAT Supported are regular ethernet->ethernet connections, including one 802.1q VLAN and/or PPPoE encapsulation Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mtk-mmc: don't advertise highmem support.NeilBrown2018-04-051-0/+1
| | | | | | | | | | | | | | | | of_dma_configure() sets a default ->dma_mask of DMA_BIT_MASK(32), claiming devices can DMA from the full 32bit address space. The mtk-mmc driver does not support access to highmem pages, so it is really limited to the bottom 512M (actually 448M due to 64M of IO space). Setting ->dma_mask to NULL causes mmc_setup_queue() to fall-back to using BLK_BOUNCE_HIGH to tell the block layer to use a bounce-buffer for any highmem pages requiring IO. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix BUG_ON on mtk-mmc driver probeFelix Fietkau2018-04-051-3/+1
| | | | | | | Our .dts files only have one device defined and this is unlikely to change, so statically initialize host->id to 0. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: move mtk-mmc driver code out of patches-*/ and into files-*/Felix Fietkau2018-04-057-0/+4758
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>