openwrt/upstream - upstream openwrt

	Commit message (Expand)	Author	Age	Files	Lines
*	ramips: remove erroneous "wdt rst" DTS entries	Kevin Darbyshire-Bryant	2017-10-25	1	-1/+1
*	ramips: update device tree source files	L. D. Pinney	2017-08-03	1	-2/+3
*	ramips: mt7621: add compatible strings	L. D. Pinney	2017-07-29	1	-0/+1
*	mt76: update to the latest version	Felix Fietkau	2017-02-01	1	-2/+2
*	ramips: cleanup dts files of mt7621 based boards	Mathias Kresin	2016-11-23	1	-2/+1
*	treewide: dts: use keycode defines from input dt-binding	Mathias Kresin	2016-11-13	1	-1/+3
*	ramips: remove duplicate i2c dts info	Michael Lee	2016-06-20	1	-6/+0
*	ramips: fix size-cells on spi nodes	Álvaro Fernández Rojas	2016-05-18	1	-1/+1
*	ramips: DTS rework	Stanislav Galabov	2016-05-12	1	-74/+73
*	ramips: fix serial baudrate for final version of ZBT-WG2626 board	John Crispin	2016-01-19	1	-1/+1
*	ramips: update DTS files to use jedec,spi-nor compatible string for m25p80 to...	Felix Fietkau	2015-12-18	1	-1/+1
*	ramips: mt7621: use symbolic names of gic interrupt settings	John Crispin	2015-12-11	1	-1/+1
*	ramips: add support for ZBT WG2626	John Crispin	2015-11-02	1	-0/+127

/dts-v1/; #include "mt7620a.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { compatible = "dlink,dir-810l", "ralink,mt7620a-soc"; model = "D-Link DIR-810L"; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; wps { label = "wps"; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; }; gpio-leds { compatible = "gpio-leds"; power { label = "dir-810l:green:power"; gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; wan { label = "dir-810l:orange:wan"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; status { label = "dir-810l:orange:power"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; }; }; &spi0 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; factory5g: partition@50000 { label = "factory5g"; reg = <0x50000 0x10000>; read-only; }; partition@60000 { label = "Wolf_Config"; reg = <0x60000 0x10000>; read-only; }; partition@70000 { label = "MyDlink"; reg = <0x70000 0x80000>; read-only; }; partition@e0000 { label = "Jffs2"; reg = <0xe0000 0x80000>; read-only; }; partition@170000 { label = "firmware"; reg = <0x170000 0x690000>; }; }; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf"; ralink,function = "gpio"; }; }; }; &ethernet { mtd-mac-address = <&factory 0x28>; mediatek,portmap = "llllw"; }; &gsw { mediatek,port4 = "ephy"; pinctrl-names = "default"; pinctrl-0 = <&ephy_pins>; }; &pcie { status = "okay"; }; &wmac { ralink,mtd-eeprom = <&factory 0>; };