aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files
Commit message (Collapse)AuthorAgeFilesLines
...
* ramips: add a workaround to fix failsafe on RT5350John Crispin2014-08-181-1/+18
| | | | | | | | | Due to TCP connections not working when VLAN is disabled, this is needed to get failsafe functional. Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42179 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips:support Lenovo AC1200 Wireless routerJohn Crispin2014-08-035-2/+29
| | | | | | | | | Lenovo AC1200 series has two types, Y1 and Y1S. Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port. Signed-off-by: Lintel <lintel.huang@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41961 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for VoCoreJohn Crispin2014-08-015-0/+17
| | | | | | | | | This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock. All GPIOs are exported, except spi/i2c. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41939 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for easyacc wizard8800John Crispin2014-08-012-0/+4
| | | | | | Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41936 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix LEDs on the Kingston MLW221John Crispin2014-08-012-1/+2
| | | | | | | | | | LED Fix up for the Kingston Mobilelite Wireless (MLW-221) http://wiki.openwrt.org/toh/kingston/mlw221 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41933 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Kingston MLW221John Crispin2014-07-265-0/+14
| | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless (MLW-221) http://wiki.openwrt.org/toh/kingston/mlw221 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41841 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: ethernet mac cleanupJohn Crispin2014-07-262-123/+22
| | | | | | | | | Compile tested all subtargets and profiles. Unfortunately I don't own any board affected by these changes, so no run tests. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41839 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix vlan configuration for asiarf avm003John Crispin2014-07-261-0/+1
| | | | | | | | | The earlier r41797 change was missing this part, to enable the right vlan configuration. Signed-off-by: Russell Senior <russell@personaltelco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41838 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix sysupgrade for asiarf awm003John Crispin2014-07-262-0/+4
| | | | | | | | | Since the earlier r41797 change, the board_name for awm003 has been miscalculated, and sysupgrade has been broken. This seems to fix it. Signed-off-by: Russell Senior <russell@personaltelco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41837 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix missing inclusion of system.sh for mtd_get_mac_binary and friends.John Crispin2014-07-231-0/+1
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41810 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: soc wmac eeprom cleanupJohn Crispin2014-07-172-108/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Move eeprom extraction from scripts to dts files. Additionally there are few other changes like: - whitespace fixes - add partition labels where needed - BR6524N board doesn't exist (lost in translation?) - fix Edimax 3g-6200nl model - add wmac eeprom to dts for Asus RT-N14U board Compile tested all subtargets and their profiles. Run tested on: - Asus RT-N15 - Asus RT-N14U - Buffalo WHR-600D - Argus ATP52B - Sparklan WCR-150GN Few problems noted: - many boards didn't have wmac eeprom information defined at all - several boards don't have any patitions defined (see FIXME comments in dts) Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41680 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: basic support for Planex MZK-750DHPJohn Crispin2014-07-143-1/+6
| | | | | | | | some gpios are still missing. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41654 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: extract default lan_mac from eth0John Crispin2014-07-141-0/+1
| | | | | | | | | The default case of ramips_setup_macs() is useful when mtd-mac-address is defined in dts. But lan_mac is not set by default, this results in lan and wan having the same mac. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41632 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for WR8305RT boardJohn Crispin2014-07-127-1/+27
| | | | | | | Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41584 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Zbtlink WA05 routerJohn Crispin2014-07-104-2/+12
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41579 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add Wansview NCS601W IP CameraJohn Crispin2014-07-023-0/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41453 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: register wifi firmware for WRTnodeJohn Crispin2014-07-011-0/+1
| | | | | | | | | After r41444 wifi working on WRTnode. Tested. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41452 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add WHR-1166 supportJohn Crispin2014-07-013-2/+7
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41447 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: RT-N56U support fixes and factory image creationJohn Crispin2014-06-161-2/+15
| | | | | | Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41224 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add vlan configuration for asiarf awm002-evbJohn Crispin2014-06-161-0/+1
| | | | | | | | | Without this, the ports all end up on vlan 1. This enables a separate WAN port that works. Signed-off-by: Russell Senior <russell@personaltelco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41216 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add asiarf awapn2403 supportJohn Crispin2014-06-136-0/+18
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41177 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix asiarf/awm002 switch setupJohn Crispin2014-06-021-1/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40939 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGCJohn Crispin2014-06-021-1/+1
| | | | | | | | | | | | | | | | | | | ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40915 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix not set lan/wan mac addressJohn Crispin2014-06-021-4/+4
| | | | | | | | | | | | The first switch case is default case. Then it will only match default case. cause not update the lan/wan mac address. And in the default switch case the param lan_mac is empty. it will case error message 'arithmetic syntax error' when call macaddr_add function. Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40910 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: Add support for samsung cy-swr1100 wireless routerJohn Crispin2014-06-028-0/+25
| | | | | | | | | | | | It is base on rt3662 soc with dual band 802.11n wireless router. Use rtl8367R switch chip. This patch adds a profile for this board. It use seama image header. so i also enable it on kernel config. Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40908 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Support for Teltonika RUT5XXJohn Crispin2014-06-024-0/+8
| | | | | | | | | | | | Hi Hartmut, Thanks for your feedback, I have reformated the patch accordingly. Added support for Teltonika RUT5XX hardware. Signed-off-by: Steffen Weinreich <steve@weinreich.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40907 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add dir-645 to the eeprom hotplug scriptJohn Crispin2014-04-231-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40561 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for the 7Links PX-4885 wireless router.John Crispin2014-04-226-0/+13
| | | | | | | | | | | | | The 7Links PX-4885 is a small battery-powered wireless router. It is based on a RT5350F WiSoC and features one ethernet port and one USB port. It is a Hame MPR-A1 clone, except it has different GPIOs, a different battery and more RAM (32 MB). This patch adds a profile for this board, the corresponding device tree file and the adequate base-files changes (incl. sysupgrade). Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add Airlink101 AR725W userland supportJohn Crispin2014-04-225-0/+11
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40550 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for wrtnodeJohn Crispin2014-03-073-0/+6
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39786 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for na930John Crispin2014-02-184-1/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39611 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add userspace support for the Edimax BR-6475nDJohn Crispin2014-01-157-1/+31
| | | | | | | | | The rt2x00 wifi driver may still need updating to function with this device. Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39298 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix eeprom loadingJohn Crispin2014-01-121-1/+4
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39245 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add HLK-RM04 supportJohn Crispin2014-01-127-0/+13
| | | | | | | | https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39237 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: switch to askconsoleJohn Crispin2014-01-121-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39236 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for RT-N14U (mt7620n based) boardJohn Crispin2013-12-254-0/+12
| | | | | | | | | | | | | | | | | added dts file and userspace scripts modified to support Asus RT-N14U board current support status: usb works ethernet works buttons reset, wps leds asus:blue:[usb|lan|wan|air|power] i2c not tested uart not tested wifi not yet Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39163 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix initial network configuration for few boardsJohn Crispin2013-11-301-9/+6
| | | | | | | | | | Argus ATP52B: ethernet didn't work because of unconfigured switch Sparklan WCR150GN: add switch config and make single port to be LAN Dlink DIR-645: seems to be a redundant case Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38960 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: allow users to delect debug level during bootJohn Crispin2013-11-251-1/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38909 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: set the mac addr via the dts fileJohn Crispin2013-11-251-88/+12
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38902 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: set wmr-300 mac properlyJohn Crispin2013-11-191-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38872 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for ralink mt7620 nand eval boardJohn Crispin2013-11-181-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38848 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: make all none 3x5x boards default to a vlan1/2 setupJohn Crispin2013-11-181-6/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38845 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix wmr300 network detectionJohn Crispin2013-11-171-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38828 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add mt7620n supportJohn Crispin2013-11-163-4/+7
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38823 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: revert 38348 as it breaks network on the hame-mprJohn Crispin2013-11-071-2/+0
| | | | | | | | | https://dev.openwrt.org/changeset/38348 https://dev.openwrt.org/ticket/14403#comment:1 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38669 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for 2 new mt7620 boards made by buffaloJohn Crispin2013-10-285-0/+23
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38550 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fixes mpr a1/a2 network setupJohn Crispin2013-10-091-0/+2
| | | | | | | Signed-off-by: Suschman <suschman@gmx.net> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38348 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix asiarf image generationJohn Crispin2013-10-071-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38324 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: DIR610A1 Fix remaining issuesJohn Crispin2013-10-072-1/+2
| | | | | | | | | | | | This patch fixes: - Ethernet and Wireless LEDs - Wireless MAC Address - Remove whitespaces from dts file Signed-off-by: Flavio Silveira <fggs@terra.com.br> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38321 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix DIR-320-B1 board detectionJohn Crispin2013-09-301-1/+1
| | | | | | | | https://dev.openwrt.org/ticket/14226 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38264 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 10:10:42 +0000