aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc/hotplug.d
Commit message (Collapse)AuthorAgeFilesLines
* ramips: Add support for 8devices Carambola dev board.Gabor Juhos2012-08-291-0/+1
| | | | | | | | | | | | Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33303
* ramips: add board alias for the ALL0239-3GGabor Juhos2012-08-171-0/+1
| | | | | | | | | | | | | | Generate image for the ALL0239-3G which can be flashed through the chipset-vendor SDK based firmware's web-interface and bootloader. The bootloader seems to ignore uImage checksum errors, but does complain about them once the 0xDEADC0DE was replaced by an actual JFFS2 page. I'm working on implementing fixtrx for uImage in the mtd package to solve this. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33206
* ramips: add support for D-Link DIR-615 H1Gabor Juhos2012-08-171-0/+1
| | | | | | | | | | | | rt2x00 still needs some patching as the radio doesn't come to life. Installation via webflash. [juhosg: fix whitespace issues, remove rt305x_register_usb from machine setup because the board has no USB port] Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> SVN-Revision: 33205
* ramips: add D-Link DIR-620 A1 supportGabor Juhos2012-08-121-0/+1
| | | | | | | | | | | | Full functionality runtime tested, installation via OEM web-interface requires a follow-up patch. Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing bits (including the antiparallel wps led). Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33142
* D-Link DAP-1350 initial supportJohn Crispin2012-07-241-0/+4
| | | | | | | | | The initial support for the D-Link DAP-1350. USB related functionality is not tested. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32821
* add ALL5002 userspace supportJohn Crispin2012-07-241-0/+1
| | | | | | | | detect EEPROM, MAC addresses and support sysupgrade for the ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32816
* ramips: rt305x: add support for Edimax 3G-6200NGabor Juhos2012-07-121-0/+1
| | | | | | | | Support for Edimax 3G-6200N router with USB. Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com> SVN-Revision: 32682
* ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA RouterGabor Juhos2012-06-191-0/+1
| | | | | | | | | | This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router. The platform is based on Ralink RT3052. http://wiki.openwrt.org/toh/petatel/psr-680w Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru> SVN-Revision: 32450
* ramips: make rt2x00 firmware extraction quietGabor Juhos2012-05-271-1/+1
| | | | SVN-Revision: 31918
* ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UNGabor Juhos2012-04-291-0/+1
| | | | | | Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> SVN-Revision: 31507
* ramips: rt305x: add support for the Asus WL-330N3G boardGabor Juhos2012-04-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the ASUS WL-330N3G Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led. The bi-color led is driven by 2 gpio. I don't know how to handle this, so I simply made 2 leds : one red, one blue. But the red light takes precedence over the blue one according to the chart below. r = led is red b = led is blue 0 = led is off xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness initial state action led gpio state r0 b0 r0->r1 r r0 b0 r0 b0 b0->b1 b r0 b1 r1 b0 r1->r0 0 r0 b0 r1 b0 b0->b1 r r1 *b1* r1 b1 r1->r0 b r0 b1 r1 b1 b1->b0 r r1 b0 r0 b1 r0->r1 r r1 *b1* r0 b1 b1->b0 0 r0 r0 Signed-off-by: Frédéric Leroy <fredo@starox.org> SVN-Revision: 31450
* ramips: rt305x: add initial support for Tenda W306R V2.0Gabor Juhos2012-04-211-0/+1
| | | | | | | | | | More device info at: http://wiki.openwrt.org/toh/tenda/w306r Signed-off-by: David Pearce <David_18051985@hotmail.com.au> [juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages from the profile, change broken GPIO number] SVN-Revision: 31396
* ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN ↵Jo-Philipp Wich2012-03-291-0/+1
| | | | | | network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation SVN-Revision: 31144
* ramips: rt305x: add add support for the Asus WL-330N boardGabor Juhos2012-03-271-0/+1
| | | | | | | | | [juhosg: reorder several lines in order to keep things sorted alphabetically] Signed-off-by: Frédéric Leroy <fredo@starox.org> SVN-Revision: 31100
* ramips: add support for unbranded XDX-RN502J boardGabor Juhos2012-03-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | This patch adds support for routers using a PCB marked XDX-RN502J V2.0, such as some unbranded routers like this: http://www.mediafire.com/?8acv87h6snn9fj6 http://www.mediafire.com/?do7xonw7scor4kn http://www.mediafire.com/?1ad49zvx3e7jyix http://www.mediafire.com/?i46cqiq66maa197 http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html some reports also state the Aceex 22Y uses the same board. more information can be found in the following openwrt forum post https://forum.openwrt.org/viewtopic.php?id=34878 [juhosg: fix checkpatch warnings, use the GENERIC_4M template] Signed-off-by: bruno schwander <bruno@tinkerbox.org> SVN-Revision: 30809
* ramips: board support for Asus RT-N10+Gabor Juhos2012-03-041-0/+1
| | | | | | | | | [juhosg: fix indentation in platform scripts, and remove debug messages from 06_set_iface_mac] Signed-off-by: Patrick van Staveren <trick@vanstaveren.us> SVN-Revision: 30808
* ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G routerGabor Juhos2012-02-191-0/+1
| | | | | | | | | | | | | [juhosg: - don't switch back to 2.6.39 - update config-3.2 - change machine id to SL-R7205 - reorder case entries in platform scripts - remove button hotplug script] Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com> SVN-Revision: 30645
* ramips: extract eeprom for the built-in wlan module on the RT-N56UGabor Juhos2012-02-161-1/+3
| | | | SVN-Revision: 30604
* add Ralink V11ST-FE board supportFlorian Fainelli2012-02-151-0/+1
| | | | | | | | | | This board is equipped with: - 4MB of NOR Flash - 32MB of SDRAM - IC+ IP175C switch - one Mini-PCI slot SVN-Revision: 30561
* ramips: extract eeprom for the PCIe wlan module on the RT-N56UGabor Juhos2012-02-141-4/+12
| | | | SVN-Revision: 30529
* ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GNGabor Juhos2012-02-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Accton WR6202 Mini 3G broadband router. Full details for this device are available at http://www.awbnetworks.com/products03.php?Fullkey=19. This device is identical to the SMCWBR11S-3GN: http://www.smc-asia.com/products03.php?Fullkey=210 It's also worth noting that this board has a GPIO line to control the power to the USB port. [juhosg: - fix checkpatch warnings, - reorder Kconfig entry, - merge the sysupgrade patch, - add GPL header] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 30434
* ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boardsGabor Juhos2012-01-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 29910
* ramips: add user-space support for ALL0256NGabor Juhos2012-01-241-0/+1
| | | | | | | | This adds uci-defaults and sysupgrade support for the ALL0256N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29883
* ramips: rt288x: add support for the Belkin F5D8235-4 v1 boardGabor Juhos2011-12-281-0/+1
| | | | | | Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29617
* ramips: rt305x: add support for the ALFA Networks W502U (R36) boardGabor Juhos2011-12-281-0/+1
| | | | SVN-Revision: 29615
* ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N boardGabor Juhos2011-12-271-0/+1
| | | | SVN-Revision: 29612
* ramips: initial support for Sitecom WL-351 v1 002Gabor Juhos2011-12-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604
* ramips: add support for the Senao/EnGenius ESR-9753 boardGabor Juhos2011-12-231-0/+1
| | | | | | Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603
* ramips: add support for Omnima MiniEMBWiFi boardGabor Juhos2011-12-141-0/+1
| | | | | | | | | This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> SVN-Revision: 29533
* ramips: Sparklan wcr-150gn board fixesGabor Juhos2011-12-011-1/+1
| | | | | | | | | | | | * Fix partition sizes. * Add buttons and leds. * Register usb. * Remove unnecessary stuff from image Makefile * Fix rt2x00 eeprom extract. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29380
* ramips: Support for NexAira BC2Gabor Juhos2011-10-241-0/+1
| | | | | | | | | The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> SVN-Revision: 28571
* ramips: rt305x: add support for the ZyXEL NBG-419N boardGabor Juhos2011-08-221-0/+1
| | | | SVN-Revision: 28078
* ramips: rt305x: support for wr512-3gn-like routersGabor Juhos2011-08-191-1/+2
| | | | | | Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28052
* ramips: fix wireless on Belkin F5D8235 v2Gabor Juhos2011-08-191-2/+5
| | | | | | | | Fix wireless firmware extract from flash for Belkin F5D8235 v2. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28050
* ramips: add support for Argus ATP-52BGabor Juhos2011-08-151-0/+1
| | | | | | | | [The ESW related changes has been removed - juhosg] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 27991
* ramips: rt305x: add support for the Netcore NW718 boardGabor Juhos2011-07-281-0/+1
| | | | SVN-Revision: 27813
* ramips: rt305x: add support for the Asus RT-G32 B1 boardGabor Juhos2011-07-281-0/+4
| | | | | | Based on a patch by: Sergiy <piratfm@gmail.com> SVN-Revision: 27812
* ramips: rt305x: add support for the DIR-600 B1,B2 boardsGabor Juhos2011-07-281-1/+3
| | | | SVN-Revision: 27808
* ramips: add hotplug script to extract eeprom for the rt2x00 driverGabor Juhos2011-07-031-0/+55
SVN-Revision: 27393
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 20:01:12 +0000