aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/oxnas/image
Commit message (Collapse)AuthorAgeFilesLines
* oxnas: now longer build KD20 factory imageDaniel Golle2020-12-231-4/+0
| | | | | | | | | | The image never worked in any release and is also broken in snapshots due to stock bootloader not loading more than 4 MiB. Hence it's better to remove the image for now, users who want to flash OpenWrt on new devices may build LEDE 17.01 with everything possible disabled to get a small enough and working factory image. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: kd20: revert accedintally commited changeDaniel Golle2020-08-291-0/+4
| | | | | | | | | Changing the factory image of KD20 was used during testing and wasn't intended to be included in the commit fixing a SATA bug on oxnas. Revert that part of the commit. Fixes: 5793112f75 ("oxnas: reduce size of ATA DMA descriptor space") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* treewide: use wpad-basic-wolfssl as defaultPetr Štetiar2020-08-201-1/+1
| | | | | | | | | | | | | | | In order to support SAE/WPA3-Personal in default images. Replace almost all occurencies of wpad-basic and wpad-mini with wpad-basic-wolfssl for consistency. Keep out ar71xx from the list as it won't be in the next release and would only make backports harder. Build-tested (build-bot settings): ath79: generic, ramips: mt7620/mt76x8/rt305x, lantiq: xrx200/xway, sunxi: a53 Signed-off-by: Petr Štetiar <ynezz@true.cz> [rebase, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* oxnas: reduce size of ATA DMA descriptor spaceDaniel Golle2020-08-111-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After years of trying to find the reason for random kernel crashes while both CPU and SATA are under load it has been found. Some odd commented-out #defines in kref's single-port driver [1] which were copied from the vendor driver made me develop a theory: The IO-mapped memory area for DMA descriptors apparetly got some holes just before the alignment boundaries. This feels like an off-by-one bug in the hardware or maybe those fields are used internally by the SATA controller's firmware. Whatever the cause is: they cannot be used and trying to use them results in reading back unexpected stuff and ends up with oopsing Unable to handle kernel paging request at virtual address d085c004 Work around the issue by reducing the area used for bmdma descriptors. This reduces SATA performance (iops) quite a bit, but finally makes things work reliably. Possibly one could optimize this much more by really just skipping the holes in that memory area -- however, that seems to be non-trivial with the driver and libata in it's current form (suggestions are welcome). The 'proper' way to have good SATA performance would be to make use of the hardware RAID features (one can use the JBOD mode to access even just a single disc transparently through the RAID controller integrated in the SATA host instead of accessing the SATA ports 'raw' as we do now). [1]: https://github.com/kref/linux-oxnas/blob/master/drivers/ata/sata_oxnas.c#L25 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: use vendor_model scheme for ox810seAdrian Schmutzler2020-07-251-3/+4
| | | | | | | | | | | | Most newer targets have been converted to consistently use vendor_model scheme for device definitions/image names, ox820 is using it as well, so let's just convert ox810se for consistency. While at it, use generic setup for DEVICE_DTS and add SUPPORTED_DEVICES. The latter have been introduced for ox820 already in cf7896117b3e ("oxnas: enable image metadata by setting SUPPORTED_DEVICES") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: simplify inclusion of subtarget image filesAdrian Schmutzler2020-06-111-7/+1
| | | | | | | | | | | | | | Many target use a repetitive if-include scheme for their subtarget image files, though their names are consistent with the subtarget names. This patch removes these redundant conditions and just uses the variable for the include where the target setup allows it. For sunxi, this includes a trivial rename of the subtarget image Makefiles. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* oxnas: some improvements for Shuttle KD20Daniel Golle2020-03-311-3/+3
| | | | | | | | | * install kmod-hwmon-drivetemp by default * wire up thermal zone * fix fan GPIO polarity * fix i2c-gpio GPIO_OPEN_DRAIN Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: enable sata on Pogoplug V3/ProSungbo Eo2020-03-171-3/+4
| | | | | | | | | Pogoplug V3/Pro has an interanl SATA port. To use it, DTS sata node should be enabled, and kmod-ata-oxnas-sata package needs to be installed. Fixes: FS#2542 Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* oxnas: harmonize line breaks in ox820.mkSungbo Eo2020-03-161-12/+14
| | | | | | | | | Follow the guideline suggested in e417ff88f19b ("ramips: harmonize line breaks in image Makefiles"). While at it, fix typos in the device title of Akitio MyCloud. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: make kmod-hwmon-core selected by dependent modulesSungbo Eo2020-03-131-1/+1
| | | | | | | | | | | | | | | | | | Currently kmod-hwmon-* will not get into images unless kmod-hwmon-core is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-hwmon-gpiofan - kmod-hwmon-lm63 - kmod-hwmon-lm75 - kmod-hwmon-lm85 - kmod-hwmon-lm90 Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx, adjust line wrapping] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* oxnas: clean up DEVICE_VARSSungbo Eo2020-03-112-4/+3
| | | | | | | DTS variable is not used in any device. Just drop it. UBIFS_OPTS is not device-dependent here. Remove it from DEVICE_VARS. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* oxnas: convert DEVICE_TITLE to new variablesDaniel Golle2019-07-102-8/+13
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: install wireless driver on pogoplugproDaniel Golle2019-03-121-1/+1
| | | | | | | | PogoPlug Pro comes with AzureWave AW-NE762H PCIe module containing Ralink's Rt3090 chip supported by the rt2x00 driver. Install the driver as well as wpad-basic. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: use generic filenames for image and DTSDaniel Golle2019-03-111-20/+17
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: switch to kmod-ledtrig-usb-portDaniel Golle2019-03-011-5/+6
| | | | | | | | Add port handles for both USB 2.0 ports so they can be used as trigger-source for USB LEDs. Suggestions for pogoplug and akitio,mycloud devices are welcome. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: enable image metadata by setting SUPPORTED_DEVICESDaniel Golle2018-11-041-0/+5
| | | | | | | For each board, set the legacy name as well as the new based on the compatible-string from devicetree. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: bring in new oxnas targetDaniel Golle2018-06-013-0/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users or writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: kill old oxnas targetDaniel Golle2018-06-011-107/+0
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-1/+1
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* oxnas: append metadata to sysupgrade imageDaniel Golle2017-01-011-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: add KERNEL_SIZE to the default device varsMathias Kresin2016-09-131-1/+1
| | | | | This reverts commit ec37a565878fd79d4127cbb843c17ce3b8dc97c0 and fixes the underlying issue.
* image: use k as unit suffix for blocksizeMathias Kresin2016-09-041-1/+1
| | | | | | | Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
* oxnas: small image improvements for kd20Daniel Golle2016-09-091-2/+4
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: kd20: generate image compatible with stock firmwareDaniel Golle2016-09-041-1/+26
| | | | | | | | * adjust MTD partitions to match vendor's scheme * generate *factory.tar.gz image compatible with stock web-if firmware upgrade interface Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-291-1/+1
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* image: clean up UBI related device variable definitionsFelix Fietkau2016-07-141-2/+1
| | | | | | | Move UBI related variable export to core, since the variables are used by a core Build/ template Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: install kernel binaries into bin/ for use with external storageFelix Fietkau2016-06-071-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: use global UBIFS_OPTS, all profiles use the same settingsFelix Fietkau2016-05-221-5/+1
| | | | | | Fixes build when selecting a device profile Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: reorganize image build code and nuke profilesDaniel Golle2016-05-161-37/+29
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: add support for Akitio MyCloud miniHauke Mehrtens2016-04-191-1/+5
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49197
* oxnas: set ubifs parameters for Default profileJohn Crispin2016-03-231-0/+1
| | | | | | | | | | | | | | | | | | Work-around obsolete mkfs/ubifs code. Unlike squashfs, ubifs images should be generated per-device so minimum I/O unit size, logical erase block size, maximum logical erase block count can be defined for the specific flash-chips parameters. Also, generating ubinized images is unrelated to rootfs being ubifs or squashfs, but rather depends on the device supporting UBI or not. In the meantime and in order to fix an error which currently causes the image generation on buildbot to fail, work-around by defining UBIFS_OPTS for the Default profile. See also http://buildbot.openwrt.org:8010/builders/oxnas/builds/246/steps/compile_8/logs/stdio Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49068
* oxnas: switch to new image generation templateJohn Crispin2016-03-201-86/+44
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49041
* oxnas: image: Remove custom mkfs targz override as base should be fine nowFelix Fietkau2015-10-311-5/+0
| | | | | | | | | It was wrong anyway, missing file sort order parameter which was fixed in base month ago. Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47314
* oxnas: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variableFelix Fietkau2015-10-311-12/+8
| | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47310
* image.mk: move KDIR_TMP definition to a central locationJonas Gorski2015-08-141-1/+0
| | | | | | | | | | | Instead of each target defining it the same, move the KDIR_TMP definition to include/image.mk. In addition Image/Build/SysupgradeNAND already requires KDIR_TMP to be set, so it makes sense to have it globally defined. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46592
* oxnas: change file extension of u-boot+initramfs imageFelix Fietkau2015-06-141-1/+1
| | | | | | | | | | The *u-boot-initramfs* images are not ITB/FIT images but are rather supposed to be loaded to RAM and jumped-into. To avoid confusion, change the file extension from itb to bin. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 45963
* oxnas: fix itb generationJohn Crispin2015-02-161-2/+2
| | | | | | | | | | | | | | | - according to imx6 Makefile and u-Boot documentation is itb and probably should not be changed - this fixes build error if CONFIG_TARGET_ROOTFS_INCLUDE_FIT is set (missing .itb file) - use DTS_DIR (like in imx6 Makefile) only compile tested Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Acked-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44468
* oxnas: copy ubinized images to binary folderJohn Crispin2015-02-091-0/+2
| | | | | | | | | | | | | | | | Since r43778 ubinized images are stored inside KDIR. This makes sense when using an uninized image to generate a factory image. On oxnas ubinized images were used for sysupgrade before proper NAND support was implemented in OpenWrt. For users still on old builds before sysupgrade.tar was introduced, ubinized image is thus the only option to conveniantly upgrade to a more recent build. Copy ubinized image also to BIN_DIR, so it will be easier for users to find them. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44357
* oxnas: use u-boot.bin in KDIRJohn Crispin2014-12-121-2/+2
| | | | | | | | This fixes building *u-boot-initramfs.bin images using ImageBuilder Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43663
* add new target 'oxnas'John Crispin2014-11-261-0/+135
This is the oxnas target previously developed at http://gitorious.org/openwrt-oxnas Basically, this consolidates the changes and addtionas from http://github.org/kref/linux-oxnas into a new OpenWrt hardware target 'oxnas' adding support for PLX Technology NAS7820/NAS7821/NAS7825/... formally known as Oxford Semiconductor OXE810SE/OXE815/OX820/... For now there are 4 supported boards: Cloud Engines Pogoplug V3 (without PCIe) fully supported Cloud Engines Pogoplug Pro (with PCIe) fully supported MitraStar STG-212 aka ZyXEL NSA-212, aka Medion Akoya P89625 / P89636 / P89626 / P89630, aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587 fully supported, see http://wiki.openwrt.org/toh/medion/md86587 Shuttle KD-20 partially supported (S-ATA driver lacks support for 2nd port) Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43388