aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/octeon
Commit message (Collapse)AuthorAgeFilesLines
* octeon: add support for Itus Shield RouterDonald Hoskins2020-08-166-10/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Itus Networks Shield - 1Ghz dual-core mips64 / Cavium Octeon 3 SoC, 1Gb RAM, 4Gb eMMC,3 GbE 10/100/1000 ports Information regarding device can be found: https://deviwiki.com/wiki/Itus_Networks_Shield_Pro Installing OpenWrt on Itus Networks Shield: 1) Boot Shield 2) On device: mount /dev/mmcblk1p1 /mnt 3) scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to /mnt/ItusrouterImage 3a) Optionally: scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to /mnt/ItusgatewayImage to allow you to have an emergency recovery boot in the GATEWAY slot - this slot will have no permament storage and is used for emergency recovery only when booted in the (G)ateway position 4) On device: umount /mnt 5) reboot Once booted, run the sysupgrade via cli or luCi on the openwrt-octeon-itus,shield-router-squashfs-sysupgrade.tar file the mode you are running. Once rebooted, the system installation is complete. Your storage partition for the mode is inialized and set. Signed-off-by: Donald Hoskins <grommish@gmail.com> [cut out sysupgrade-* changes, move a few lines, drop case CVMX_BOARD_TYPE_ITUS_SHIELD] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: determine sysupgrade-* directory for upgrade automaticallyDonald Hoskins2020-08-161-5/+13
| | | | | | | | | | | | | | | | | | So far, the sysupgrade-* folder used during upgrade in octeon was hardcoded to contain the board name. Therefore, changing board name or BOARD_NAME variable in image/Makefile might have broken upgrade. Improve this by adding a step to determine the folder name via a wildcard, as it is done for generic nand_upgrade_tar() in lib/upgrade/nand.sh. While this still does not remove the problem for existing devices (which still have the old script), it will entirely remove the issue on newly added devices on this platform. Signed-off-by: Donald Hoskins <grommish@gmail.com> [split into separate patch, add commit message, add return values] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: Move CONFIG_IONIC to generic kernel configHauke Mehrtens2020-08-101-1/+0
| | | | | | | It is deactivated everywhere, just set this in the generic config. Acked-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: unify CONFIG_GPIO_SYSFS in kernel configsFelix Fietkau2020-08-062-2/+0
| | | | | | Enable it for all platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: drop shebang from non-executable target filesAdrian Schmutzler2020-06-161-1/+0
| | | | | | | | | | | | | | This drops the shebang from all target files for /lib and /etc/uci-defaults folders, as these are sourced and the shebang is useless. While at it, fix the executable flag on a few of these files. This does not touch ar71xx, as this target is just used for backporting now and applying cosmetic changes would just complicate things. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: set 5.4 as default kernelAdrian Schmutzler2020-05-251-1/+1
| | | | | | | octeon has provided 5.4 as testing kernel for some time now, let's switch to 5.4 to have a bigger audience for testing. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: use kernel version 5.4 for testingAdrian Schmutzler2020-04-231-0/+1
| | | | | | Tested on EdgeRouter Lite (by Daniel Engberg) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: update config for kernel 5.4Daniel Engberg2020-04-231-14/+24
| | | | | | | | Update config with make kernel_oldconfig. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [split patch, redo kernel_oldconfig, add description] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: refresh patches for kernel 5.4Daniel Engberg2020-04-233-5/+5
| | | | | | | | Refresh patches to make them apply to kernel 5.4. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [split patch, refresh on newer kernel, add description] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: copy files to kernel 5.4Daniel Engberg2020-04-234-0/+389
| | | | | | | | Copy config and patches to kernel 5.4. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [split patch, fix patches-5.4 dirname, add description] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove maintainer variable from targetsPetr Štetiar2020-03-161-1/+0
| | | | | | | | | | | | | There is no such role as target maintainer anymore, one should always send corresponding changes for the review and anyone from the commiters is allowed to merge them or eventually use the hand break and NACK them. Lets make it clear, that it is solely a community doing the maintenance tasks. Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Piotr Dymacz <pepe2k@gmail.com>
* octeon: Remove kernel 4.14 supportHauke Mehrtens2020-03-125-447/+0
| | | | | | | | | This target was switched to kernel 4.19 more than 6 months ago in commit f342ffd300da ("treewide: kernel: bump some targets to 4.19") and now with kernel 5.4 support being added it gets harder to support kernel 4.14 in addition to kernel 4.19 and 5.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* octeon: apply vendor_model scheme to device definition/image nameAdrian Schmutzler2020-01-261-11/+13
| | | | | | | | | | | | | | | This updates the device definition name for octeon target to provide more useful names for the images and be consistent with the increasing number of targets following that scheme. Since the target is not using device tree yet, this does not touch board_name and thus sets BOARD_NAME in image Makefile to ensure sysupgrade is still working. While at it, move Build block before Device blocks and remove trailing whitespace for CMDLINE. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: remove redundant network setupAdrian Schmutzler2020-01-181-4/+0
| | | | | | No need to have specific setup when default case does the same. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: fix sysupgradeStijn Tintel2019-11-301-2/+2
| | | | | | | | Sysupgrade was failing due to incorrect replacement of backticks: /sbin/sysupgrade: /lib/upgrade/platform.sh: line 101: syntax error: missing '))' Fixes: 0bbfc3dff719 ("octeon: replace backticks by $(...)") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* octeon: split up remaining DEVICE_TITLEMoritz Warning2019-10-191-1/+2
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR and DEVICE_MODEL Signed-off-by: Moritz Warning <moritzwarning@web.de>
* octeon: replace backticks by $(...)Adrian Schmutzler2019-09-291-2/+2
| | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [decapitalized patch subject at submitter's request] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* treewide: use new procd sysupgrade $UPGRADE_BACKUP variableRafał Miłecki2019-09-051-1/+1
| | | | | | | | | | It's a variable set by procd that should replace hardcoded /tmp/sysupgrade.tgz. This change requires the most recent procd with the commit 0f3c136 ("sysupgrade: set UPGRADE_BACKUP env variable"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* treewide: when copying a backup file always specify dest nameRafał Miłecki2019-09-051-1/+1
| | | | | | | $CONF_TAR shouldn't be assumed to always point to the sysupgrade.tgz. This change makes code more generic and allows refactoring $CONF_TAR. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* treewide: don't hardcode "sysupgrade.tgz" file nameRafał Miłecki2019-09-051-1/+2
| | | | | | | | 1) Add BACKUP_FILE and use it when copying an archive to be restored after sysupgrade (on the next preinit). 2) Use CONF_TAR for copying backup prepared by the /sbin/sysupgrade Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* octeon: split up DEVICE_TITLEMoritz Warning2019-08-021-2/+4
| | | | | | Splits up DEVICE_TITLE into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* treewide: kernel: bump some targets to 4.19Petr Štetiar2019-06-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lets bump kernel to 4.19 on targets which were run tested or got ACKed so we've enough time to make it ready for next release: armvirt/32 (runtested in qemu) armvirt/64 (runtested in qemu) ath79/generic (runtested on Carambola2) gemini/generic (runtested on DIR-685, DNS-313, SQ201, SL93512R) imx6/generic (runtested on Apalis) ipq40xx/generic (runtested on nbg6617) malta/be64 (runtested in qemu) malta/be (runtested in qemu) malta/le (runtested in qemu) malta/le64 (runtested in qemu) mpc85xx/generic (runtested on TL-WDR4900) mpc85xx/p2020 (runtested on P2020RDB) mvebu/cortexa53 mvebu/cortexa72 mvebu/cortexa10 octeon/generic (runtested on EdgeRouter Lite) sunxi/cortexa53 (build tested only) sunxi/cortexa7 (runtested on Lime2-K) sunxi/cortexa8 (build tested only) tegra/generic x86/64 (runtested in qemu) Acked-by: Zoltan HERPAI <wigyori@uid0.hu> [sunxi] Tested-by: Linus Walleij <linus.walleij@linaro.org> [gemini] Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [mvebu, tegra] Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [octeon] Tested-by: Pawel Dembicki <paweldembicki@gmail.com> [mpc85xx/generic mpc85xx/p2020] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* octeon: Deactivate MIPS O32 and N32 supportHauke Mehrtens2019-05-142-12/+4
| | | | | | | | | OpenWrt is completely compiled from sources using a 64 bit compiler, we do not need support for the old 32 bit MIPS interface on 64 Bit CPUs, deactivate it. Fixes: 46af22de16b2 ("kernel: Remove CONFIG_COMPAT") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* octeon: Refresh kernel configurationHauke Mehrtens2019-05-142-2/+11
| | | | | | This refreshes the kernel configuration with "make kernel_oldconfig" Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Remove CONFIG_COMPATHauke Mehrtens2019-05-112-13/+0
| | | | | | | | | | | | | This removes support for executing old 32 bit applications on 64 bit ARM and MIPS kernels. On OpenWrt we normally compile all the user space applications on our own and do not support third party binary only modules especial not 32 bit applications on 64 bit CPUs. This reduces the attack surface on such systems and should also save some memory. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: add a config option for enabling a testing version of the target kernelFelix Fietkau2019-05-111-0/+1
| | | | | | | If the target supports a newer kernel version that is not used by default yet, it can be enabled with this option Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.19 to 4.19.34Koen Vandeputte2019-04-082-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Removed: - 030-PCI-dwc-skip-MSI-init-if-MSIs-have-been-explicitly-d.patch Altered: - 366-netfilter-nf_flow_table-clean-up-and-fix-dst-handlin.patch - 650-netfilter-add-xt_OFFLOAD-target.patch - 662-remove_pfifo_fast.patch - 332-arc-add-OWRTDTB-section.patch - 100-clocksource-drivers-arch_timer-Workaround-for-Allwin.patch - 702-phy_add_aneg_done_function.patch New symbols: - ARC_IRQ_NO_AUTOSAVE - SUN50I_ERRATUM_UNKNOWN1 Compile-tested: cns3xxx, imx6, sunxi Runtime-tested: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* target/octeon: Add Linux 4.19 supportDaniel Engberg2019-04-064-0/+392
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for Linux 4.19 kernel, various cleanups listed below. Drop 170-cisco-hack.patch as these devices never seems to have been supported. Unset kernel symbols: * CONFIG_CAVIUM_CN63XXP1=y No supported hardware uses CN63XXP1 and it causes "slight decrease in performance" Source: https://cateee.net/lkddb/web-lkddb/CAVIUM_CN63XXP1.html * CONFIG_USB_OCTEON_EHCI=y CONFIG_USB_OCTEON_OHCI=y Deprecated Source: https://cateee.net/lkddb/web-lkddb/USB_OCTEON_EHCI.html https://cateee.net/lkddb/web-lkddb/USB_OCTEON_OHCI.html Removed kernel symbols: * # CONFIG_ARCH_HIBERNATION_POSSIBLE=y * CONFIG_ARCH_SUSPEND_POSSIBLE=y These are not in if you do a vanilla config of a MIPS Octeon kernel and I can't find any references about support on this platform. * # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set * CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 No need to have this in by default, not defined in most other targets * CONFIG_CRASH_CORE=y Can't find any documentation why this should be enabled by default * CONFIG_DEBUG_INFO=y Set by https://github.com/openwrt/openwrt/blob/master/config/Config-kernel.in#L134 * CONFIG_DEBUG_SPINLOCK=y No need to have this in by default * CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 Already set by default Source: https://cateee.net/lkddb/web-lkddb/DEFAULT_HUNG_TASK_TIMEOUT.html * CONFIG_DETECT_HUNG_TASK=y No need to have this in by default, not defined in most other targets * CONFIG_HAVE_DEBUG_KMEMLEAK=y No need to have this in by default, not defined in most other targets * CONFIG_HAVE_DEBUG_STACKOVERFLOW=y No need to have this in by default * CONFIG_HAVE_IDE=y None of the supported devices have IDE * CONFIG_HZ=250 * # CONFIG_HZ_100 is not set * CONFIG_HZ_250=y This is broken with generic config * CONFIG_KALLSYMS=y No need to have this in by default, not defined in most other targets * CONFIG_KEXEC=y * CONFIG_KEXEC_CORE=y No need to have this in by default, not defined in most other targets * CONFIG_HAVE_KVM=y No need to have this in by default * CONFIG_SCHED_DEBUG=y No need to have this in by default, not defined in most other targets * CONFIG_SYSFS_DEPRECATED=y Deprecated symbol Source: https://cateee.net/lkddb/web-lkddb/SYSFS_DEPRECATED.html * CONFIG_SYSFS_DEPRECATED_V2=y Discouraged usage in general Source: https://cateee.net/lkddb/web-lkddb/SYSFS_DEPRECATED_V2.html * CONFIG_UNINLINE_SPIN_UNLOCK=y No need to have this in by default, not defined in most other targets Source: https://github.com/openSUSE/kernel/blob/master/lib/Kconfig.debug#L1137 * CONFIG_ZLIB_INFLATE=y No need to have this in by default, not defined in most other targets Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* octeon: fix typo in platform.shHans Dedecker2019-01-121-1/+1
| | | | | | Fix upgrade typo Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: Deactivate CONFIG_COMPAT_BRKHauke Mehrtens2018-12-261-1/+0
| | | | | | | | | CONFIG_COMPAT_BRK disables the heap randomization which is only needed for very old and ancient user space applications, I am not aware that we run any of these, just deactivate this option for these targets to allow heap randomization. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* octeon: Evaluate board names in alphabetical orderJonathan Thibault2018-12-061-5/+5
| | | | Signed-off-by: Jonathan Thibault <jonathan@navigue.com>
* octeon: remove linux 4.9 supportFelix Fietkau2018-09-296-2060/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: Add and set CPU type Octeon+ as defaultDaniel Engberg2018-06-201-1/+1
| | | | | | | | | | | | | | The lowest CPU type used by supported Octeon platform is Octeon+ (EdgeRouter Lite) while EdgeRouter Pro/ER-8 uses Octeon II which is backwards compatible with Octeon+. Sources: https://community.ubnt.com/t5/EdgeRouter/EdgeRouter-Pro-CPU/td-p/654599 https://www.cavium.com/octeon-II-CN68XX.html "OCTEON II family is fully software compatible with the widely-adopted OCTEON Plus family" Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* kernel: enable THIN_ARCHIVES by defaultSergey Ryazanov2018-05-221-1/+0
| | | | | | | | THIN_ARCHIVES option is enabled by default in the kernel configuration and no one target config disables it. So enable it by default and remove this symbol from target specific configs to keep them light. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: enable FUTEX_PI by defaultSergey Ryazanov2018-05-221-1/+0
| | | | | | | | | New FUTEX_PI configuration symbol enabled if FUTEX and RT_MUTEX symbols are enabled. Both of these symbols are enabled by default in the generic config, so enable FUTEX_PI by default too to keep platform specific configs minimal. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: enable EXPORTFS by defaultSergey Ryazanov2018-05-221-1/+0
| | | | | | | | OVERLAY_FS config symbol selects EXPORTFS since 4.12 kernel, we have OVERLAY_FS enabled by default, so enable EXPORTFS in the generic config of 4.14 and remove this option from platform specific configs. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: disable DRM_LIB_RANDOM by defaultSergey Ryazanov2018-05-221-1/+0
| | | | | | | DRM_LIB_RANDOM config symbol selected only by DRM_DEBUG_MM_SELFTEST which is disable by default, so disable DRM_LIB_RANDOM by default too. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: disable DMA_{NOOP|VIRT}_OPS by defaultSergey Ryazanov2018-05-221-2/+0
| | | | | | | These options do not used by any supported arch, so disable them by default to make arch configs a bit more clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: disable ARCH_WANTS_THP_SWAP by defaultSergey Ryazanov2018-05-221-1/+0
| | | | | | | | Only one arch (x86_64) enables this option. So disable ARCH_WANTS_THP_SWAP by default and remove referencies to it from all configs (except x86_64) to make them clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* octeon: switch to kernel 4.14Stijn Tintel2018-02-081-1/+1
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* target: disable CONFIG_PROC_PAGE_MONITOR on most targetsJo-Philipp Wich2018-01-132-2/+0
| | | | | | | | | | Disable CONFIG_PROC_PAGE_MONITOR in most places and only keep it enabled for virtual targets such as malta or potent ones like x86. This saves up to 4KB of uncompressed kernel size and significantly decreases CPU load under certain workloads. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: bump 4.14 to 4.14.13Kevin Darbyshire-Bryant2018-01-113-8/+8
| | | | | | Refresh patches Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* octeon: add support for kernel 4.14Stijn Tintel2018-01-085-0/+465
| | | | | | Tested on EdgeRouter Lite. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* treewide: use only board_name function to get nameMathias Kresin2017-07-153-7/+7
| | | | | | | | | | | | Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree compatible string directly. Always use the board_name function to get the board name. The admswconfig package still reads /proc/cpuinfo directly. The code looks somehow broken and the whole adm5120 which uses this package looks unmaintained. Leave it as it is for now. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: populate boardname and model earlierMathias Kresin2017-07-151-0/+0
| | | | | | | | | | | | | For targets using the generic board detection and board specific settings in diag.sh, the board name is still unset at the time the set_state() provided by diag.sh is called by 10_indicate_preinit. Change the execution order to ensure the boardname is populated before required the first time. Do the target specific board detection as early as possible, directly followed by the generic one to allow a seamless switch to the generic function for populating /tmp/sysinfo/. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: disable CONFIG_SG_POOL by defaultSergey Ryazanov2017-06-071-0/+1
| | | | | | | | CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last one is disabled by default then disable CONFIG_SG_POOL by default too. And explicitly enable it only for platforms that use CONFIG_SCSI. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* octeon: enable high-res timersFelix Fietkau2017-06-071-2/+0
| | | | | | Helps with network stack performance Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: remove linux 4.4 supportFelix Fietkau2017-05-256-2051/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: port missing 4.9 patchesFelix Fietkau2017-05-046-0/+1766
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: only copy sysupgrade file if presentJohn Crispin2017-02-151-1/+1
| | | | | | | | | | this caused 'mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory' when running sysupgrade -n Signed-off-by: John Crispin <john@phrozen.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 22:05:11 +0000