aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.163John Audia2023-01-149-16/+16
| | | | | | | | | | | | | | | Removed upstreamed: generic/101-Use-stddefs.h-instead-of-compiler.h.patch[1] All patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.163&id=ddd2bb08bd99b7ee4442fbbe0f9b80236fdd71d2 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* mvebu: backport upstream patch to fix COMPHY resetMichal Hrusecky2023-01-111-0/+50
| | | | | | | | | | | | | | | | | | | | Upstream commit [1] included in the Linux kernel version 6.2 was backported to Linux kernels 6.1.4, 6.0.18. It should be possible that it is going to be backported even to the 5.15 series, but before it happens, let's include it here. It was discovered that on SOC Marvell Armada 3720, which is using e.g. Turris MOX, and if you are also using it with older ARM Trusted Firmware v1.5, it is not possible to detect connected USB 3.0 devices, but they are working just fine when connected with USB 2.0 cable. This patch fixes it. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/phy/marvell/phy-mvebu-a3700-comphy.c?id=b01d622d76134e9401970ffd3fbbb9a7051f976a Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [improve commit description, added tag to the patch]
* mvebu: harmonize GL.iNet GL-MV1000 MTD partitions layout with vendorEnrico Mioso2023-01-061-1/+19
| | | | | | | The GL-MV1000 ships with a 16MB spi-nor flash, containing a copy of the stock GL.iNet firmware. Add the corresponding flash areas, so our view matches the one of the in-flash stock firmware. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
* kernel: bump 5.15 to 5.15.86John Audia2023-01-033-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch[1] ipq806x/patches-5.15/122-01-clk-qcom-clk-krait-fix-wrong-div2-functions.patch[2] bcm27xx/patches-5.15/950-0198-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch[3] Manually rebased: ramips/patches-5.15/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch[4] Added patch/backported: ramips/patches-5.15/107-PCI-mt7621-Add-sentinel-to-quirks-table.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=c160505c9b574b346031fdf2c649d19e7939ca11 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=a051e10bfc6906d29dae7a31f0773f2702edfe1b 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=ec1727f89ecd6f2252c0c75e200058819f7ce47a 4. Quilt gave this output when I applied the patch to rebase it: % quilt push -f Applying patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch patching file arch/mips/ralink/Kconfig patching file drivers/pci/controller/Kconfig patching file drivers/pci/controller/Makefile patching file drivers/staging/Kconfig patching file drivers/staging/Makefile patching file drivers/staging/mt7621-pci/Kconfig patching file drivers/staging/mt7621-pci/Makefile patching file drivers/staging/mt7621-pci/TODO patching file drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt patching file drivers/staging/mt7621-pci/pci-mt7621.c Hunk #1 FAILED at 1. Not deleting file drivers/staging/mt7621-pci/pci-mt7621.c as content differs from patch 1 out of 1 hunk FAILED -- saving rejects to file drivers/staging/mt7621-pci/pci-mt7621.c.rej patching file drivers/pci/controller/pcie-mt7621.c Applied patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch (forced; needs refresh) Upon inspecting drivers/staging/mt7621-pci/pci-mt7621.c.rej, it seems that the original patch wants to delete drivers/staging/mt7621-pci/pci-mt7621.c but upstream's version was not an exact match. I opted to delete that file. 5. Suggestion by hauke: https://github.com/torvalds/linux/commit/19098934f910b4d47cb30251dd39ffa57bef9523 "This patch is in upstream kernel, but it was backported to the old staging driver in kernel 5.15." Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* Revert "Revert "mvebu: switch default kernel to 5.15""Petr Štetiar2022-12-201-2/+1
| | | | | | | | This reverts commit 97c77fff28cf001399f33c7bc1ec6687ba18450b as commit 8be6350f6646 ("generic: 5.15: allow MV88E6xxx built-in when PTP support disabled") contains the fix, so lets enable kernel 5.15 on mvebu again. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: bump 5.15 to 5.15.83John Audia2022-12-141-1/+1
| | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/883-v6.1-ca8210-Fix-crash-by-zero-initializing-data.patch[1] All patches automatically rebased 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.83&id=246bcd05ba6cc43b34ac0bb4bac3ea94a4efa07c Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me>
* Revert "mvebu: switch default kernel to 5.15"Petr Štetiar2022-12-041-1/+2
| | | | | | | | | | | | | | This reverts commit 5429411f732ba76eced30b5b596ec9c0374d0965 as upstream in commit e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") has changed `PTP_1588_CLOCK` dependency handling in 5.15 kernel. That currently leads to `CONFIG_NET_DSA_MV88E6XXX=m` in images produced by buildbots due to `CONFIG_ALL_KMODS=y` config option being used in those builds, which leads to a broken LAN bridge network on several devices. References: https://lists.infradead.org/pipermail/openwrt-devel/2022-December/039950.html Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mvebu: switch default kernel to 5.15Stijn Segers2022-12-021-2/+1
| | | | | | | | | | | | | In light of https://github.com/openwrt/openwrt/issues/11077, switch mvebu to 5.15 which has been the testing kernel on this target since April - over half a year. Run-tested on the following subtargets: * cortexa9 (Turris Omnia - 03f41b1eb2f15ab06d5800274be6a67c64e2a629) * cortexa72 (MikroTik RB5009UG+S+IN) Tested-by: Enrico Mioso <mrkiko.rs@gmail.com> [GL-MV1000] Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* mvebu: cortexa72: add CONFIG_ARM64_ERRATUM_1742098John Audia2022-10-301-0/+1
| | | | | | | | 5.15.76 introduces a new symbol that applies Cortex-A72 SoCs so enable it[1]. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/arm64/Kconfig?id=v5.15.76&id2=v5.15.75 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic configAleksander Jan Bajkowski2022-10-214-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | Endianness depends on CPU architecture. CONFIG_CPU_(BIG/LITTLE)_ENDIAN should be enabled on target or subtarget based on SoC architecture. Fixes warning: $ make kernel_oldconfig CONFIG_TARGET=subtarget ... .config:1008:warning: override: CPU_LITTLE_ENDIAN changes choice state .... Summary: - ARC - only the CONFIG_CPU_BIG_ENDIAN symbol is defined for this architeture. If it is disabled then the processor operates in LITTLE_ENDIAN mode (default), - ARM32 - CONFIG_CPU_LITTLE_ENDIAN symbol available since kernel 5.19. This option should be enabled after OpenWRT moves to kernel 6.x. After refreshing the kernel, the symbol disappears, - ARM64 - enabled CONFIG_CPU_LITTLE_ENDIAN, - MIPS - enabled relevant symbols, - POWERPC - enabled CONFIG_CPU_BIG_ENDIAN, - UML - Symbols are not defined for this architecture, - X86 - always little endian. Symbols are not defined for this architecture. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* mvebu: PCI: aardvark: Implement workaround for PCIe Completion TimeoutJosef Schlehofer2022-09-111-0/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Turris MOX randomly crashes up, when there is connected miniPCIe card MediaTek MT7915 with the following output: [ 71.457007] Internal error: synchronous external abort: 96000210 [#1] SMP [ 71.464021] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat ath9k xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIREl [ 71.464187] btintel br_netfilter bnep bluetooth ath9k_hw ath10k_pci ath10k_core ath sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_mg [ 71.629589] CPU: 0 PID: 1298 Comm: kworker/u5:3 Not tainted 5.4.114 #0 [ 71.636319] Hardware name: CZ.NIC Turris Mox Board (DT) [ 71.641725] Workqueue: napi_workq napi_workfn [ 71.646221] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 71.651169] pc : mt76_set_irq_mask+0x118/0x150 [mt76] [ 71.656385] lr : mt7915_init_debugfs+0x358/0x368 [mt7915e] [ 71.662038] sp : ffffffc010003cd0 [ 71.665451] x29: ffffffc010003cd0 x28: 0000000000000060 [ 71.670929] x27: ffffffc010a56f98 x26: ffffffc010c0fa9a [ 71.676407] x25: ffffffc010ba8788 x24: ffffff803e01fe00 [ 71.681885] x23: 0000000000000030 x22: ffffffc010003dc4 [ 71.687361] x21: 0000000000000000 x20: ffffff803e01fea4 [ 71.692839] x19: ffffff803cb725c0 x18: 000000002d660780 [ 71.698317] x17: 0000000000000000 x16: 0000000000000001 [ 71.703795] x15: 0000000000005ee0 x14: ffffffc010d1d000 [ 71.709272] x13: 0000000000002f70 x12: 0000000000000000 [ 71.714749] x11: 0000000000000000 x10: 0000000000000040 [ 71.720226] x9 : ffffffc010bbe980 x8 : ffffffc010bbe978 [ 71.725704] x7 : ffffff803e4003f0 x6 : 0000000000000000 [ 71.731181] x5 : ffffffc02f240000 x4 : ffffffc010003e00 [ 71.736658] x3 : 0000000000000000 x2 : ffffffc008e3f230 [ 71.742135] x1 : 00000000000d7010 x0 : ffffffc0114d7010 [ 71.747613] Call trace: [ 71.750137] mt76_set_irq_mask+0x118/0x150 [mt76] [ 71.754990] mt7915_dual_hif_set_irq_mask+0x108/0xdc0 [mt7915e] [ 71.761098] __handle_irq_event_percpu+0x6c/0x170 [ 71.765950] handle_irq_event_percpu+0x34/0x88 [ 71.770531] handle_irq_event+0x40/0xb0 [ 71.774486] handle_level_irq+0xe0/0x170 [ 71.778530] generic_handle_irq+0x24/0x38 [ 71.782667] advk_pcie_irq_handler+0x11c/0x238 [ 71.787249] __handle_irq_event_percpu+0x6c/0x170 [ 71.792099] handle_irq_event_percpu+0x34/0x88 [ 71.796680] handle_irq_event+0x40/0xb0 [ 71.800633] handle_fasteoi_irq+0xdc/0x190 [ 71.804855] generic_handle_irq+0x24/0x38 [ 71.808988] __handle_domain_irq+0x60/0xb8 [ 71.813213] gic_handle_irq+0x8c/0x198 [ 71.817077] el1_irq+0xf0/0x1c0 [ 71.820314] el1_da+0xc/0xc0 [ 71.823288] mt76_set_irq_mask+0x118/0x150 [mt76] [ 71.828141] mt7915_mac_tx_free+0x4c4/0x828 [mt7915e] [ 71.833352] mt7915_queue_rx_skb+0x5c/0xa8 [mt7915e] [ 71.838473] mt76_dma_cleanup+0x89c/0x1248 [mt76] [ 71.843329] __napi_poll+0x38/0xf8 [ 71.846835] napi_workfn+0x58/0xb0 [ 71.850342] process_one_work+0x1fc/0x390 [ 71.854475] worker_thread+0x48/0x4d0 [ 71.858252] kthread+0x120/0x128 [ 71.861581] ret_from_fork+0x10/0x1c [ 71.865273] Code: 52800000 d65f03c0 f9562c00 8b214000 (b9400000) [ 71.871560] ---[ end trace 1d4e29987011411b ]--- [ 71.876320] Kernel panic - not syncing: Fatal exception in interrupt [ 71.882875] SMP: stopping secondary CPUs [ 71.886923] Kernel Offset: disabled [ 71.890519] CPU features: 0x0002,00002008 [ 71.894649] Memory Limit: none [ 71.897799] Rebooting in 3 seconds.. Patch is awaiting upstream merge: https://lore.kernel.org/linux-pci/20220802123816.21817-1-pali@kernel.org/T/#u There was also discussion about it in the linux-pci mailing list, where can be found response from Marvell's employee regarding A3720 PCIe erratum 3.12, which seems to provide further details which help this issue: https://lore.kernel.org/linux-pci/BN9PR18MB425154FE5019DCAF2028A1D5DB8D9@BN9PR18MB4251.namprd18.prod.outlook.com/t/#u Reported-by: Ondřej Caletka <ondrej@caletka.cz> [Turris MOX] Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* kernel: bump 5.15 to 5.15.67John Audia2022-09-095-11/+11
| | | | | | | | | | All patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.62Petr Štetiar2022-08-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Deleted following upstreamed patches: bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch Manually rebased following patches: bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch Runtime tested on turris-omnia and glinet-b1300. Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mvebu: leds: Turris Omnia improvementsJosef Schlehofer2022-08-163-0/+182
| | | | | | | It backports this patch series, which is currently on review: https://lore.kernel.org/linux-leds/20220704105955.15474-1-kabel@kernel.org/T/#rb89a4ca5a836f17bdcc53d65549e0b1779bb6a18 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* mvebu: backport pending DTS changes for Turris OmniaJosef Schlehofer2022-08-162-0/+86
| | | | | | | | Backport pending patches: - https://lore.kernel.org/linux-arm-kernel/20220704113622.18887-1-kabel@kernel.org/ - https://lore.kernel.org/linux-arm-kernel/20220704113622.18887-2-kabel@kernel.org/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* mvebu: refresh the 5.15 kconfigsRui Salvaterra2022-08-163-10/+4
| | | | | | Clean them up. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: add Linux 5.15 as testing kernelRui Salvaterra2022-08-161-0/+1
| | | | | | Run-tested on the cortexa9 subtarget (Turris Omnia). Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: update the kconfigs for 5.15Rui Salvaterra2022-08-163-28/+38
| | | | | | And remove irrelevant stuff while at it. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: copy 5.10 kconfigs to 5.15Rui Salvaterra2022-08-164-0/+610
| | | | | | Will be refreshed/updated later. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: refresh 5.15 patchesRui Salvaterra2022-08-1616-83/+32
| | | | | | | | | | | | | | | | Deleted (upstreamed): 303-linksys_hardcode_nand_ecc_settings.patch [1] Deleted (not needed): 314-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch [2] Manually rebased: 700-mvneta-tx-queue-workaround.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4daff3e5b42422cd4af758cc7768223d2b7f6e14 [2] https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=7f73acade0cde61341cb77e0dc74de51ac059d4f Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: remove all ≤ 5.15-tagged patchesRui Salvaterra2022-08-169-681/+0
| | | | | | They're already upstream. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: copy 5.10 patches to 5.15Rui Salvaterra2022-08-1642-0/+5103
| | | | | | Linux 5.15 on Marvell EBU, here we go! Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: backport pending Turris Omnia LEDs improvementsJosef Schlehofer2022-08-134-1/+183
| | | | | | | | | | | | | | | | | | | | | | | | | | | It backports this patch series, which is currently on review: https://lore.kernel.org/linux-leds/20220704105955.15474-1-kabel@kernel.org/T/#rb89a4ca5a836f17bdcc53d65549e0b1779bb6a18 It allows being able to configure LEDs in userspace. This fixes issue described in Turris Build repository https://gitlab.nic.cz/turris/os/build/-/issues/354 It happens in OpenWrt as well. - Before ``` root@turris:/# ls /sys/class/leds/ ath10k-phy0 ath9k-phy1 mmc0:: ``` -After ``` root@turris:/# ls /sys/class/leds/ ath10k-phy0 rgb:indicator-2 rgb:lan-3 rgb:wlan-1 ath9k-phy1 rgb:lan-0 rgb:lan-4 rgb:wlan-2 mmc0:: rgb:lan-1 rgb:power rgb:wlan-3 rgb:indicator-1 rgb:lan-2 rgb:wan ``` Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* mvebu: backport DTS changes for Turris Omnia from mvebu/dtJosef Schlehofer2022-08-132-0/+86
| | | | | | | | | | | My commit backported patches from the following links: - https://lore.kernel.org/linux-arm-kernel/20220704113622.18887-1-kabel@kernel.org/ - https://lore.kernel.org/linux-arm-kernel/20220704113622.18887-2-kabel@kernel.org/ According to the links, they are applied in repository mvebu in branch dt, so it should be included in upcoming Linux version soon. Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: Activate CONFIG_GPIOLIB in generic configurationHauke Mehrtens2022-08-101-1/+0
| | | | | | | | All targets expect the malta target already activate the CONFIG_GPIOLIB option. Move it to generic kernel configuration and also activate it for malta. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: cortexa72: fix ImageBuilder for IEI Puzzle devicesDaniel Golle2022-07-041-2/+0
| | | | | | | | | The line trying to generate the standard sdcard.img.gz fails due to boot.scr not being generated. Remove the line in order to use the default sdcard.img.gz which is exactly the same but includes generating the boot.scr file. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: add Methode euroDPU supportRobert Marko2022-06-295-4/+35
| | | | | | | | | | | | | | | | Add support for Methode euroDPU which is based on uDPU but does not have a second SFP cage, instead of which a Maxlinear G.hn IC is used. PHY mode is set to 1000Base-X despite Maxlinear IC being capable of 2500Base-X since until 5.15 support for mvebu is available trying to use 2500Base-X will cause buffer overruns for which the fix is not easily backportable. Installation instructions: 1. Boot the FIT initramfs image (openwrt-mvebu-cortexa53-methode_edpu-initramfs.itb) 2. sysupgrade using the openwrt-mvebu-cortexa53-methode_edpu-firmware.tgz Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* mvebu: update and refactor uDPU DTSRobert Marko2022-06-293-34/+211
| | | | | | | | | | | | | | | | | | uDPU DTS has pending upstream fixups, so backport those as well as split the DTS into a DTSI and DTS in preparation for euroDPU support which uses uDPU as the base. Ethernet aliases have not yet been sent upstream but will be soon in order for U-boot to set the correct MAC on both ethernet interfaces instead of just one. Since U-boot environment now has its own partition, update the envtools config script to search for it instead. Patch hardcoding PHY mode is also not applicable anymore, so drop it and set in the uDPU DTS directly. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-243-0/+6
| | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add kmod-leds-turris-omniaStefan Kalscheuer2022-06-242-1/+17
| | | | | | | | | | | | | | Add support for LEDs of the CZ.NIC Turris Omnia using the upstream driver. There is no generic way to control the LEDs in UCI manner, however the kernel module is the first step to actually use the RGB LEDs in custom logic. Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de> (removed DMARC notice, added driver to Turris Omnia, moved module recipe to target/linux/mvebu/modules.mk) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mvebu: add SolidRun ClearFog GT 8KLogan Blyth2022-06-193-3/+20
| | | | | | | | ClearFog GT 8K is device sold by SolidRun. It is marketed as a development board, not a consumer product. The device tree file for this board is upstream in kernel.org. Signed-off-by: Logan Blyth <mrbojangles3@gmail.com>
* kernel: bump 5.10 to 5.10.116Hauke Mehrtens2022-06-061-1/+1
| | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/900-regulator-consumer-Add-missing-stubs-to-regulator-co.patch All other patches automatically rebased. Compile-tested: lantiq/xrx200, armvirt/64 Run-tested: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu/cortexa72: enable armv8-CE crypto algosEneas U de Queiroz2022-06-041-0/+11
| | | | | | | | | | | This enables armv8 crypto extensions version of AES, GHASH, SHA1, SHA256, and SHA512 algorithms in the kernel. The choice of algorithms match the 32-bit versions that are enabled in the target config-5.10 file, but were only used by the cortexa9 subtarget. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* mvebu/cortexa72: refresh kernel 5.10 configEneas U de Queiroz2022-06-041-1/+3
| | | | | | This is result of a plain make kernel_oldconfig CONFIG_TARGET=subtarget. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* mvebu/cortexa53: enable armv8-CE crypto algosEneas U de Queiroz2022-06-041-0/+11
| | | | | | | | | | | This enables armv8 crypto extensions version of AES, GHASH, SHA1, SHA256, and SHA512 algorithms in the kernel. The choice of algorithms match the 32-bit versions that are enabled in the target config-5.10 file, but were only used by the cortexa9 subtarget. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* mvebu/cortexa53: refresh kernel 5.10 configEneas U de Queiroz2022-06-041-1/+6
| | | | | | This is result of a plain make kernel_oldconfig CONFIG_TARGET=subtarget. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* config: limit CONFIG_DEBUG_INFO to top-level generic configsTony Ambardar2022-05-181-1/+0
| | | | | | | | | | Remove redundant target-level entries, noting that these settings will be configured from "Kernel build options" of Kconfig. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove from new configs introduced after patch submission] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mvebu: make boot filesystem reproducibleDaniel Golle2022-03-281-1/+3
| | | | | | | Set timestamp option for make_ext4fs to make boot filesystem reproducible. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: udpu: include LM75 kmod by defaultRobert Marko2022-03-211-1/+1
| | | | | | | uDPU has 2 LM75 compatible temperature sensors, so include the driver for them by default in order to utilize them. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* mvebu: udpu: fix initramfs bootingRobert Marko2022-03-211-1/+1
| | | | | | | | | | uDPU provides a FIT based initramfs, but currently gets stuck after U-boot starts the kernel at "Starting kernel..". It is due to the load address being too low, so increase it in order to get the initramfs booting again. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: 5.10: allocate last level PTEs in high memoryRui Salvaterra2022-03-011-1/+1
| | | | | | | | | | Enable support for allocating user space page table entries in high memory [1], for the targets which support this feature. This saves precious low memory (permanently mapped, the only type of memory directly accessible by the kernel). [1] https://www.kernel.org/doc/html/latest/vm/highmem.html Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: add targz feature flagPaul Spooren2022-02-241-1/+1
| | | | | | | Adding the feature flag automatically creates a a rootfs.tar.gz files which can be used for Docker rootfs containers. Signed-off-by: Paul Spooren <mail@aparcar.org>
* mvebu: cortexa72: enable ARM_ARMADA_8K_CPUFREQMatthew Hagan2022-02-201-0/+1
| | | | | | | | Enable the AP806's cpufreq driver. This driver is compatible with the Armada 7K and 8K platforms. Tested-by: Stijn Segers <foss@volatilesystems.org> (RB5009UG+S+IN) Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* mvebu: mark all mtd partitions on GL.iNet GL-MV1000 read-onlyEnrico Mioso2022-02-191-0/+3
| | | | | | | | | | | | | | | On this device, two of the three defined MTD partitions are automatically set to read-only, since they do not end at an erase/write block boundary. In particular, the only partition remaining writable is the one holding the u-boot bootloader. Mark all of the partitions read-only, at least until a better understanding of why the layout has been laid out this way is gained. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
* target/linux: replace egrep with grep -ERosen Penev2022-02-071-1/+1
| | | | | | | egrep is deprecated and replaced by grep -E. The latter is used throughout the tree. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-011-3/+3
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: add support for ipTIME NAS1dualSungbo Eo2022-01-294-0/+337
| | | | | | | | | | | | | | | | | | | | | | | | ipTIME NAS1dual is a 1-bay NAS, based on Marvell Armada 385 SoC. Specifications: * SoC: 88F6820 * RAM: 2 GiB * Flash: SPI NOR 64 MiB * SATA: 1x 3Gb/s * Ethernet: 2x 1GbE * USB: 1x 3.0 * Fan: 2 speed level * UART: J11 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mvebu: remove duplicate CONFIG_POWER_RESET entriesSungbo Eo2022-01-293-6/+1
| | | | | | | The option is already enabled in the target config since 9149ed4f05f8 ("mvebu: cortexa9: Add support for Ctera C200-V2"). Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: add disabled POWER_RESET_QNAPSungbo Eo2022-01-292-3/+1
| | | | | | Move the disabled symbol from target configs to generic configs. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mvebu: cortexa9: Fix board.d/01_ledsKlaus Kudielka2022-01-181-1/+1
| | | | | | | Fix syntax error in the case statement Fixes: 9149ed4f05f8 ("mvebu: cortexa9: Add support for Ctera C200-V2") Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-08 20:48:29 +0000