aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.4 to 5.4.94John Audia2021-02-011-1/+1
| | | | | | | | | | | | All modification made by update_kernel.sh in a fresh clone without existing toolchains. Build-tested: bcm27xx/bcm2711, ipq806x/R7800, Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* mvebu: omnia: make initramfs image usable out of the boxPetr Štetiar2021-01-311-2/+2
| | | | | | | | | | | | | | | Currently it's not possible to boot the device with just initramfs image without additional effort as the initramfs image doesn't contain device tree. Fix it by producing FIT based image which could be booted with following commands: setenv bootargs earlyprintk console=ttyS0,115200 tftpboot ${kernel_addr_r} openwrt-mvebu-cortexa9-cznic_turris-omnia-initramfs-kernel.bin bootm ${kernel_addr_r} Acked-by: Klaus Kudielka <klaus.kudielka@gmail.com> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mvebu: LS421DE: fix the thermal zonesDaniel González Cabanelas2021-01-301-13/+42
| | | | | | | | | | | | | | | | | | | | | | The thermal zones kernel documentation is misleading, we cannot use more than one sensor in a thermal zone node. Furthermore the drivetemp driver for some reason it only catches one sensor from the hard drives array (the first available). In the Buffalo Linkstation LS421DE board there is also a sensor at the ethernet phy chip that can also be monitored. Very useful to stop the fan when there are no hard drives in the bays. (It might be also possible to add the CPU sensor, but it requires kernel patching for registering the sensor via device tree, using the function: devm_thermal_zone_of_sensor_register) Fix the thermal zones to use only one sensor per node and add the ethernet phy sensor. Also adjust the hdd temperatures to be more conservative for a mechanical hard drive. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* treewide: provide global default for SUPPORTED_DEVICESAdrian Schmutzler2021-01-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The majority of our targets provide a default value for the variable SUPPORTED_DEVICES, which is used in images to check against the compatible on a running device: SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) At the moment, this is implemented in the Device/Default block of the individual targets or even subtargets. However, since we standardized device names and compatible in the recent past, almost all targets are following the same scheme now: device/image name: vendor_model compatible: vendor,model The equal redundant definitions are a symptom of this process. Consequently, this patch moves the definition to image.mk making it a global default. For the few targets not using the scheme above, SUPPORTED_DEVICES will be defined to a different value in Device/Default anyway, overwriting the default. In other words: This change is supposed to be cosmetic. This can be used as a global measure to get the current compatible with: $(firstword $(SUPPORTED_DEVICES)) (Though this is not precisely an achievement of this commit.) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: drop empty kmod-ledtrig-* packagesSungbo Eo2021-01-151-1/+1
| | | | | | | | | | | | | | The following four led triggers are enabled in generic config. * kmod-ledtrig-default-on * kmod-ledtrig-heartbeat * kmod-ledtrig-netdev * kmod-ledtrig-timer Drop the packages and remove them from DEVICE_PACKAGES. There's no other package depending on them in this repo. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: bump 5.4 to 5.4.86Adrian Schmutzler2021-01-011-3/+1
| | | | | | | | | | | | | | | | | Removed upstreamed patches: pending-5.4/499-mtd-parser-cmdline-Fix-parsing-of-part-names-with-co.patch Manually merged: pending-5.4/611-netfilter_match_bypass_default_table.patch layerscape/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/{generic,tiny}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64 Run-tested: ipq806x/R7800, realtek Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org>
* kernel: move some disabled symbols to genericAleksander Jan Bajkowski2020-12-221-3/+0
| | | | | | Move some disabled config options found in lantiq target to generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* Revert "mvebu: fix initramfs/kernel image for CZNIC Turris Omnia"Petr Štetiar2020-12-221-1/+2
| | | | | | | | | | | This reverts commit e401a2a42e6d7c892e1cf7d765fa5ec9b2db3fb3 as at least two users had reported breakage on their devices. References: https://lists.infradead.org/pipermail/openwrt-devel/2020-December/032837.html References: https://github.com/openwrt/openwrt/commit/e401a2a42e6d7c892e1cf7d765fa5ec9b2db3fb3#commitcomment-45189788 Cc: Karel Kočí <karel.koci@nic.cz> Reported-by: Magnus Kroken <mkroken@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mvebu: gpio-mvebu IRQ index error kernel backportDaniel González Cabanelas2020-12-221-0/+33
| | | | | | | | | Backport the upstream kernel fix 525b0858ff to get rid of the kernel messages: mvebu-gpio xxxxxx.gpio: IRQ index 3 not found Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* mvebu: LS421DE: use the RTC as a wakeup sourceDaniel González Cabanelas2020-12-221-0/+1
| | | | | | | | | | | | | | | | | | | The Buffalo Linkstation LS421DE comes with a Ricoh RS5C372A real time clock. This RTC has the INTRA pin connected to the power management circuit, allowing to wake up the device from the power off state when an alarm is scheduled. Add the "wakeup-source" property in the RTC dts node to allow the use of the alarm. Example of use, the device is powered off and it comes to life after 5 minutes: echo $(expr $(date '+%s') + 60 * 5) > /sys/class/rtc/rtc0/wakealarm poweroff This feature isn't available in the stock firmware. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* mvebu: LS421DE: fix low performance issueDaniel González Cabanelas2020-12-221-0/+4
| | | | | | | | | | The Buffalo Linkstation LS421DE isn't able to enable the Level 2 cache (AKA Aurora cache). As of result of this, the throughput is about half of the expected, e.g when doing network data transfers. Fix it by adding the broken-idle property in the coherency fabric node. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* mvebu: macchiatobin-singleshot: enable heartbeat LEDTomasz Maciej Nowak2020-12-202-1/+66
| | | | | | | | | | | | | | | With board revision 1.3, SolidRun moved the power LED to the middle of the board. In old place of power LED a GPIO controllable heartbeat LED was added. This commit touches only Single Shot variant, because all have revision 1.3. Some boards could be placed in an enclosure, therefore the LED18 is enabled by default, since that'll be the only visible indicator that the board is operating. Ref: http://wiki.macchiatobin.net/tiki-index.php?page=Schematics#Revision1.3_Electrical_Design_Changes Ref: http://macchiatobin.net/wp-content/uploads/2017/11/MACCHIATOBin-rev-1_3.pdf Reported-by: Alexandra Alth <alexandra@alth.de> Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mvebu: fix initramfs/kernel image for CZNIC Turris OmniaKarel Kočí2020-12-111-2/+1
| | | | | | | | | | | | | | | | | This adds DTB to kernel and that way makes it possible to easily boot initramfs image and also kernel. The sequence to boot initramfs on Omnia is then just: env set bootargs earlyprintk console=ttyS0,115200 dhcp 0x1000000 192.168.1.1:openwrt-mvebu-cortexa9-cznic_turris-omnia-initramfs-kernel.bin bootz 0x1000000 Without this change kernel boot won't proceed and is stuck on "Starting kernel". Signed-off-by: Karel Kočí <karel.koci@nic.cz> [fixed From: to match with SoB:] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mvebu: sysupgrade: write additional information to log outputTomasz Maciej Nowak2020-12-011-4/+3
| | | | | | | | This will explain what is actually occuring on dd invocations. Additionally remove comments for steps which are described by printed statements anyway. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mvebu: sysupgrade: use v function for writing logsTomasz Maciej Nowak2020-12-012-7/+7
| | | | | | Sync with x86 target changes. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mvebu: fixup Turris Omnia U-Boot environmentKlaus Kudielka2020-11-271-0/+44
| | | | | | | | | | | | | | Fixup dfa357a3de "mvebu: base-files: Update Turris Omnia U-Boot environment" which should have included this file as well. By rebasing the initial patch this file somehow disappeared. Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Reviewed-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Tested-by: W. Michael Petullo <mike@flyn.org> (Turris Omnia "2020") Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com> (Turris Omnia) [explain fixup in commit message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* mvebu: base-files: Update Turris Omnia U-Boot environmentKlaus Kudielka2020-11-261-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the update procedure from sysupgrade to first boot, which is much more convenient in the sysupgrade case (otherwise the environment is always one generation behind). Check whether we have an old U-Boot release installed, and update the environment only if necessary. Some notes on the U-Boot environment: The first 9 lines are a copy of the default environment of the old U-Boot release - only modified, to run "distro_bootcmd", in case "mmcboot" fails to boot the factory OS. The remaining 16 lines are a backport of the default environment of the new U-Boot release (shipped with CZ11NIC23). The main entry point is "distro_bootcmd", which eventually sources boot.scr. This way, we have a unified boot protocol for all Turris Omnia revisions so far. This commit also fixes a shortcoming of previous Turris Omnia support: Users may install OpenWrt with the Turris Omnia in factory state (i.e. invalid environment store). In that case, neither fw_setenv, nor U-Boot itself, would import the default environment from the image - screwing up the rescue system, at least! Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Reviewed-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Tested-by: W. Michael Petullo <mike@flyn.org> (Turris Omnia "2020") Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com> (Turris Omnia)
* mvebu: Add turris-omnia.bootscriptKlaus Kudielka2020-11-262-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | In contrast to the U-Boot version shipped with older versions of Turris Omnia (CZ11NIC13, CZ11NIC20), the version shipped with Turris Omnia 2019 (CZ11NIC23) relies on the existence of /boot.scr. Consequently, add a suitable boot script to the sysupgrade image. Flash instructions for Turris Omnia 2019: - Download openwrt-...-sysupgrade.img.gz, gunzip it, and copy the resulting .img file to the root of a USB flash drive (FAT32 or ext2/3/4). - Enter a rescue shell: Either via 5-LED reset and ssh root@192.168.1.1 on LAN port 4, or via 7-LED reset and the serial console. - Insert the USB drive and mount it: mkdir /mnt; mount /dev/sda1 /mnt - Flash the OpenWrt image to eMMC: dd if=/mnt/openwrt-...-sysupgrade.img of=/dev/mmcblk0 bs=4096 conv=fsync - Reboot. Flash instructions using a temporary "medkit" installation were written for the older versions of Turris Omnia, and will *not* work on the Turris Omnia 2019. Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Reviewed-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Tested-by: W. Michael Petullo <mike@flyn.org> (Turris Omnia "2020")
* mvebu: sysupgrade: use get_image_dd wrapperTomasz Maciej Nowak2020-11-251-6/+6
| | | | | | This function eliminates false-positive errors emitted by dd. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mvebu: sysupgrade: remove redundant MBR checkTomasz Maciej Nowak2020-11-251-13/+1
| | | | | | | | This is already done by get_partitions. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> [add "redundant" to title, remove declaration of magic variable] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: base-files: move additional files to subtargetsTomasz Maciej Nowak2020-11-252-0/+0
| | | | | | | Both of these scripts are only relevant to cortexa9, therefore move them there. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mvebu: sort patchesTomasz Maciej Nowak2020-11-2550-43/+87
| | | | | | | | | | Sort patches according to target/linux/generic/PATCHES. Additionally: - replace hashes in backported patches with the ones from main Linux tree - add descriptions to some patches Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> [remove 004-add_sata_disk_activity_trigger.patch separately] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: remove redundant patch for Linksys LED triggerAdrian Schmutzler2020-11-251-39/+0
| | | | | | | | Remove 004-add_sata_disk_activity_trigger.patch, as the trigger is already added in shared dtsi. Suggested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: add initial support for Globalscale ESPRESSObin-UltraVladimir Vid2020-11-234-0/+258
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Globalscale ESPRESSObin-Ultra. Device uses the same Armada-3720 SoC with extended hardware support. - SoC: Armada-3720 - RAM: 1 GB DDR4 - Flash: 4MB SPI NOR (mx25u3235f) + 8 GB eMMC - Ethernet: Topaz 6341 88e6341 (4x GB LAN + 1x WAN with 30W PoE) - WiFI: 2x2 802.11ac Wi-Fi marvell (88w8997 PCIe+USB) - 1x USB 2.0 port - 1x USB 3.0 port - 1x microSD slot - 1x mini-PCIe slot (USB [with nano-sim slot]) - 1x mini-USB debug UART - 1x RTC Clock and battery - 1x reset button - 1x power button - 4x LED (RGBY) - Optional 1x M.2 2280 slot ** Installation ** Copy dtb from build_dir to bin/ and run tftpserver there: $ cp ./build_dir/target-aarch64_cortex-a53_musl/linux-mvebu_cortexa53/ linux-5.4.65/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dtb bin/targets/mvebu/cortexa53/ $ in.tftpd -L -s bin/targets/mvebu/cortexa53/ Connect to the device UART via microUSB port on the back side and power on the device. Power on the device and hit any key to stop the autoboot. Set serverip (host IP) and ipaddr (any free IP address on the same subnet), e.g: $ setenv serverip 192.168.1.10 # Host $ setenv ipaddr 192.168.1.15 # Device Ping server to confirm network is working: $ ping $serverip Using neta@30000 device host 192.168.1.15 is alive Tftpboot the firmware: $ tftpboot $kernel_addr_r openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-initramfs-kernel.bin $ tftpboot $fdt_addr_r armada-3720-espressobin-ultra.dtb Set the console and boot the image: $ setenv bootargs $console $ booti $kernel_addr_r - $fdt_addr_r Once the initramfs is booted, transfer openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz to /tmp dir on the device. Gunzip and dd the image: $ gunzip /tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz $ dd if=/tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img of=/dev/mmcblk0 && sync Reboot the device. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* kernel: bump 5.4 to 5.4.77John Audia2020-11-181-46/+0
| | | | | | | | | | | | | | | | | | | | | | | | Manually rebased patches: bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch generic-backport/744-v5.5-net-sfp-soft-status-and-control-support.patch layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch mvebu/patches-5.4/521-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch Removed: layerscape/patches-5.4/819-uart-0012-tty-serial-lpuart-add-LS1028A-support.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, lantiq/Easybox 904 xDSL, x86_64 Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL, x86_64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove default-state off for LEDsAdrian Schmutzler2020-11-161-2/+0
| | | | | | | | | default-state = "off" is default for LEDs, no need to specify it explicitly. https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: LS421DE: improve the HDD ledsDaniel González Cabanelas2020-11-161-2/+2
| | | | | | | Improve the HDD LEDs used for disk activity: - Use the trigger activity per ata channel Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* kernel: bump 5.4 to 5.4.75John Audia2020-11-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased patches: bcm27xx: patches-5.4/950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch bcm53xx: patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch layerscape: patches-5.4/802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch patches-5.4/808-i2c-0002-MLK-10893-i2c-imx-add-irqf_no_suspend.patch patches-5.4/820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch Removed since could be reverse-applied by quilt: mediatek: patches-5.4/0700-arm-dts-mt7623-add-missing-pause-for-switchport.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86_64 Run-tested: ipq806x/R7800, x86_64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64] Rebase of 802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* kernel: bump 5.4 to 5.4.74John Audia2020-11-021-106/+0
| | | | | | | | | | | | | | | | | | | Removed upstreamed patches: mvebu/patches-5.4 409-phy-marvell-comphy-Convert-internal-SMCC-firmware-re.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86_64 Run-tested: ipq806x/R7800, x86_64, lantiq/Easybox 904 xDSL No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64 build/run] [added lantiq test report] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.73John Audia2020-11-015-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed patches: generic/pending-5.4 445-mtd-spinand-gigadevice-Only-one-dummy-byte-in-QUA.patch 446-mtd-spinand-gigadevice-Add-QE-Bit.patch pistachio/patches-5.4 150-pwm-img-Fix-null-pointer-access-in-probe.patch Manually rebased: layerscape/patches-5.4 801-audio-0011-Revert-ASoC-fsl_sai-add-of_match-data.patch 801-audio-0039-MLK-16224-6-ASoC-fsl_sai-fix-DSD-suspend-resume.patch 801-audio-0073-MLK-21957-3-ASoC-fsl_sai-add-bitcount-and-timestamp-.patch 820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, mvebu (mamba, rango), x86_64, ramips/mt7621 Run-tested: ipq806x/R7800, mvebu (mamba, rango), x86_64, ramips (RT-AC57U) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [alter 820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: remove support for kernel 4.19Adrian Schmutzler2020-10-3051-4490/+0
| | | | | | | We use 5.4 on all targets by default, and 4.19 has never been released in a stable version. There is no reason to keep it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: Add bootscript for espressobin to support mainline firmwareAndre Heider2020-10-112-0/+38
| | | | | | | | | | | | | | | | The generic bootscript is tailored around a downstream firmware and doesn't work on a firmware built from mainline components. Add a bootscript which: * sets $console since mainline u-boot doesn't do that * uses distro boot variables, so OpenWRT can be booted off any supported device when using a mainline firmware * sets missing distro boot variables for the downstream firmware Booting with a downstream firmware is unchanged. Booting with a mainline firmware now works. Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: move CONFIG_F2FS_CHECK_FS to generic kernel configHauke Mehrtens2020-10-111-1/+0
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Move CONFIG_F2FS_FS_SECURITY to generic kernel configHauke Mehrtens2020-10-111-1/+0
| | | | | | | Move the CONFIG_F2FS_FS_SECURITY kernel configuration option to the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: Correct regulatory country of WRT3200ACMKabuli Chana2020-10-111-1/+1
| | | | | | | | | | correct oversight on setting regulatory country and mac address of wireless configuration change method of retrieving mac address The MAC address for eth0 is rad out of the devinfo partition in some other initial configuration script already. Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* mvebu: add wrt3200acm to 03_wireless CCKabuli Chana2020-10-111-0/+1
| | | | | | | | | correct device CC oversight Set the initial wifi configuration like for the other similar Linksys devices. Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* mvebu: armada-37xx: espressobin: Backport patch for ethernet switch aliasesPali Rohár2020-10-115-5/+139
| | | | Signed-off-by: Pali Rohár <pali@kernel.org>
* mvebu: armada-37xx: Backport PCI aardvark patchesPali Rohár2020-10-1112-0/+1041
| | | | | | | | This commit contains patches for PCI aardvark driver and relevant DTS changes for Turris MOX and EspressoBin backported from mainline kernel. It fixes support for old ATF, various wifi cards, mainly Compex WLE900VX. Signed-off-by: Pali Rohár <pali@kernel.org>
* kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to genericDaniel Golle2020-10-092-3/+0
| | | | | | | | Similar to how it was already done for other filesystems' *_FS_XATTR kernel config symbols, also move CONFIG_F2FS_FS_XATTR=y and CONFIG_F2FS_STAT_FS=y to target/linux/generic. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: clean up XATTR config symbolsPaul Spooren2020-10-091-1/+0
| | | | | | | | | | | | | Extended attributes are required for overlayfs and have hence been long ago enabled for jffs2, but should be enabled unconditionally for all other filesystems which may potentially serve as overlayfs' upper directory. Previously it was inconsistently added in multiple targets. Add symbols to generic kernel config and remove all *_XATTR symbols from target configs. Signed-off-by: Paul Spooren <mail@aparcar.org> [keep things as they are for squashfs, improve commit message] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.4 to 5.4.69John Audia2020-10-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | Seemingly unneeded based on new upstream code so manually deleted: layerscape: 820-usb-0007-usb-dwc3-gadget-increase-timeout-value-for-send-ep-c.patch Manually merged: generic-hack: 251-sound_kconfig.patch All other modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [add lantiq test report, minor commit message clarification] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: update SPDX license namesAdrian Schmutzler2020-09-226-6/+6
| | | | | | | SPDX moved from GPL-2.0 to GPL-2.0-only and from GPL-2.0+ to GPL-2.0-or-later. Reflect that in the SPDX license headers. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: image: add check for fdt_add_r and kernel_addr_r variablesVladimir Vid2020-09-171-0/+8
| | | | | | | | | | | fdt_addr and kernel_addr variables are getting obsolete in the mainline u-boot in favor of fdt_addr_r and kernel_addr_r. By checking if the new variables exist, we can make sure that devices with newer version of u-boot will work while not breaking support for the existing ones. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Acked-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* treewide: revert sysupgrade adjustments for early DSA-adoptersAdrian Schmutzler2020-09-081-21/+0
| | | | | | | | | | | | | | | | | The uci-default mechanism to update the compat-version was only meant for early DSA-adopters, which should have updated by now. Remove this workaround again in order to prevent the intended experiences for all the other people. This reverts: a9703db72030 ("mvebu: fix sysupgrade experience for early DSA-adopters") 86c89bf5e8f5 ("kirkwood: fix sysupgrade experience for early DSA-adopters") Partially reverted: 1eac573b5304 ("ramips: mt7621: implement compatibility version for DSA migration") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* Revert "treewide: add sysupgrade comment for early DSA-adopters"Adrian Schmutzler2020-09-081-2/+1
| | | | | | | | | | This reverts commit e81e625ca375d6dc3c885ec870ec15757ac76d72. This was meant just for early DSA-adopters. Those should have updated by now, remove it so future updaters get the intended experience. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.63John Audia2020-09-061-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Manually merged: hack-5.4 230-openwrt_lzma_options.patch bcm27xx 950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch x86 011-tune_lzma_options.patch Remove upstreamed patches in collaboration with Ansuel Smith: ipq806x 093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch 093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch 093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch All other modifications made by update_kernel.sh Build-tested: bcm27xx/bcm2708, ipq806x, x86/64 Run-tested: ipq806x (R7800), x86/64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [update commit message/tested] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: LS421DE: add linkstation poweroff driverDaniel González Cabanelas2020-08-282-15/+2
| | | | | | | | | | | Compile the Linkstation poweroff module for the Buffalo LS421DE. Without this driver the device remains forever halted if a power off command is executed. The driver will also allow to use the WoL feature, which wasn't availabe in the stock firmware. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* mvebu: backport linkstation-poweroff upstream driverDaniel González Cabanelas2020-08-282-0/+198
| | | | | | | | | | Backport the Linkstation poweroff driver from the kernel upstream (commit a7f79f99541ef) This driver is required by the Buffalo LinkStation LS421DE for a correct power off operation. It also allows to use the WoL feature. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* kernel: bump 5.4 to 5.4.60Adrian Schmutzler2020-08-242-3/+3
| | | | | | | | | | | | | | | | | | | | Deleted upstream patches: generic: 041-genirq-affinity-Make-affinity-setting-if-activated-o.patch ipq806x: 093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch 093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch Merged manually: ipq806x: 093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch layerscape: 804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch Build-tested: ath79/generic, ipq806x, layerscape/armv7, layerscape/armv8_64b Run-tested: ipq806x (R7800) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: use wpad-basic-wolfssl as defaultPetr Štetiar2020-08-201-2/+2
| | | | | | | | | | | | | | | In order to support SAE/WPA3-Personal in default images. Replace almost all occurencies of wpad-basic and wpad-mini with wpad-basic-wolfssl for consistency. Keep out ar71xx from the list as it won't be in the next release and would only make backports harder. Build-tested (build-bot settings): ath79: generic, ramips: mt7620/mt76x8/rt305x, lantiq: xrx200/xway, sunxi: a53 Signed-off-by: Petr Štetiar <ynezz@true.cz> [rebase, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 23:43:08 +0000