aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu/patches-5.4
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.4 to 5.4.179Hauke Mehrtens2022-02-123-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between 5.4.171 and 5.4.179. The following 3 patches do not apply any more: * target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch This was already integrated in kernel v5.4-rc1, it was never needed. * target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch * target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch I think these were done to fix the problem which was really fixed in commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio hogs") from v5.4.175 target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch Move fwnode_device_is_available to the same position as in kernel 5.10. target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus") Compile-tested: lantiq/xrx200, bcm27xx/bcm2710 Run-tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: remove patch that was applied into linux stableMarek Behún2022-01-082-51/+1
| | | | | | | | | | | | | | The patch PCI: aardvark: Don't touch PCIe registers if no card connected was applied into Linux stable version 5.4.163. Remove it from patches-5.4. (It applied even though it was applied already, resulting in repeated code.) Fixes: 14940aee4566 ("kernel: bump 5.4 to 5.4.163") Signed-off-by: Marek Behún <marek.behun@nic.cz>
* mvebu: add id for AQR112 Ethernet phy variantsDaniel Golle2022-01-011-0/+55
| | | | | | Add ids for AQR112R and AQR112C 2.5G Ethernet PHYs. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: import patch enabling AQR113 PHYDaniel Golle2022-01-011-0/+43
| | | | | | Add PHY ID for the Aquantia AQR113 PHY. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: import patch enabling AQR112 and AQR412 PHYDaniel Golle2022-01-011-0/+144
| | | | | | | | Copy and refresh patch enabling AQR112 and AQR412 Ethernet PHY from layerscape (5.4) target to mvebu (5.4) as AQR112 can also be found in IEI Puzzle devices. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: puzzle-mcu: improve led driverDaniel Golle2022-01-011-51/+75
| | | | | | | | | Set blinking mode using scheduled work instead of blocking which may result in deadlocks. Add dynamic kprintf debugging hexdumps of all MCU rx and tx. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 7e4c1cca8a137ca4fe5132b8c058e52ba82defac)
* mvebu: puzzle-m902: add driver for MCU driving LEDs, fan and buzzerDaniel Golle2022-01-018-0/+2372
| | | | | | | | | | | | Backport MFD driver for communicating with the on-board MCU found on IEI World Puzzle appliances. Improve the driver to support multiple LEDs, apply a default state and let MCU take care of blinking if timing is within supported range. Wire up LEDs and fan for Puzzle M902 in device tree. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit f0c0b18234418c6ed6d35fcf1c6e5b0cbdceed49 with commit 962c58558010bd302793ac24284c4f9db8fe287f squashed)
* mvebu: backport Turris Omnia DTS changes to 5.4Klaus Kudielka2021-12-296-3/+249
| | | | | | | | | | | | Kernel 5.4 receives a reduced set, just to make the SFP cage work. While we are at it, move the patches accepted upstream to the 0xx series. Reviewed-by: Noci <noci@noci.work> Reviewed-by: Justin van Steijn <jvs@fsfe.org> Reviewed-by: Nico Rikken <nico@nicorikken.eu> Reviewed-by: Julius Schwartzenberg <julius.schwartzenberg@gmail.com> Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> (cherry picked from commit 8138cb8737d1475e6e8d57393500f30384e75a82)
* kernel: bump 5.4 to 5.4.168Hauke Mehrtens2021-12-281-1/+1
| | | | | | | | | All updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.163Hauke Mehrtens2021-12-128-544/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch The following patch does not apply to upstream any more and needs some more work to make it work fully again. I am not sure if we are still able to set the UART to a none standard baud rate. target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch These patches needed manually changes: target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All others updated automatically. Compile-tested on: malta/le, armvirt/64, lantiq/xrx200 Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.158Hauke Mehrtens2021-11-071-1/+1
| | | | | | | | | | | | Removed upstreamed: generic/backport-5.4/790-v5.7-net-switchdev-do-not-propagate-bridge-updates-across.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: backport CN9130 dts necessary files changes to 5.4Ian Chang2021-10-1410-0/+2883
| | | | | | | | | | | 1. Add support for Marvell CN9130 SoC 2. Add support for CP115,and create an armada-cp11x.dtsi file which will be used to instantiate both CP110 and CP115 3. Add support for AP807/AP807-quad,AP807 is a major component of CN9130 SoC series 4. Drop PCIe I/O ranges from CP11x file and externalize PCIe macros from CP11x file Signed-off-by: Ian Chang <ianchang@ieiworld.com> (cherry picked from commit c98ddf0f019986bbb4c868bfcaf97e0d1f4ee2dc) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.4 to 5.4.150Hauke Mehrtens2021-10-029-27/+27
| | | | | | | | | | | | | | | | | | Manually rebased: generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch Removed upstreamed: generic/backport-5.4/040-ARM-8918-2-only-build-return_address-if-needed.patch layerscape/patches-5.4/819-uart-0004-MLK-18137-fsl_lpuart-Fix-loopback-mode.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: limit mvneta tx queue workaround to 32 bit SoCTomasz Maciej Nowak2021-09-091-2/+6
| | | | | | | | | | | | | This patch has been carried since introduction throughout every kernel major bump and no one has tested if the later kernels improved the situation. The Armada 3720 SoC can only process GbE interrupts on Core 0 and this is already limited in all stable kernels, so ditch this workaround for 64 bit SoCs. Ref: https://git.kernel.org/torvalds/c/cf9bf871280d Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (cherry picked from commit cbdd2b62e4d5e0572204c37d874d32dc8610840e)
* kernel: bump 5.4 to 5.4.143Hauke Mehrtens2021-08-291-39/+0
| | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.4/950-1031-net-lan78xx-Ack-pending-PHY-ints-when-resetting.patch Removed upstreamed: mvebu/patches-5.4/100-cpufreq-armada-37xx-forbid-cpufreq-for-1.2-GHz-variant.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.142David Bauer2021-08-244-6/+6
| | | | | | | Compile-tested: ath79-generic ipq40xx-generic Run-tested: ipq40xx-generic Signed-off-by: David Bauer <mail@david-bauer.net>
* mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHzJosef Schlehofer2021-08-081-0/+39
| | | | | | | | | | | This patch is backported from linux-arm-kernel [1] to improve situation, when it was reported that 1.2 GHz variant is unstable with DFS. It waits to be accepted upstream, however, it waits for Marvell people to respond. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210630225601.6372-1-kabel@kernel.org/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit d3794768177293f584cc74f90c921276793da1e7)
* Revert "mvebu: 5.4 fix DVFS caused random boot crashes"Josef Schlehofer2021-08-081-107/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Based on the discussion on the mailing list [1], the patch which was reverted, it reverts only one patch without the subsequent ones. This leads to the SoC scaling issue not using a CPU parent clock, but it uses DDR clock. This is done for all variants, and it's wrong because commits (hacks) that were using the DDR clock are no longer in the mainline kernel. If someone has stability issues on 1.2 GHz, it should not affect all routers (1 GHz, 800 MHz) and it should be rather consulted with guys, who are trying to improve the situation in the kernel and not making the situation worse. There are two solutions in cases of instability: a) disable cpufreq b) underclock it up to 1 GHz This reverts commit 080a0b74e39d159eecf69c468debec42f28bf4d8. [1] https://lists.openwrt.org/pipermail/openwrt-devel/2021-June/035702.html CC: Pali Rohár <pali@kernel.org> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 7b868fe04a8961048feec1143e72fe47bde52a12)
* kernel: bump 5.4 to 5.4.137Hauke Mehrtens2021-07-3110-22/+22
| | | | | | | | | | | | Manually rebased generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch All others updated automatically. Compile-tested on: ramips/mt7621, armvirt/32 Runtime-tested on: ramips/mt7621, armvirt/32 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.128Hauke Mehrtens2021-06-276-60/+6
| | | | | | | | | | | | | | | Manually rebased bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch Replaced with patch from Raspberry Pi kernel 5.10 patches mvebu/patches-5.4/002-PCI-aardvark-Don-t-rely-on-jiffies-while-holding-spi.patch Applied upstream All others updated automatically. Compile-tested on: ath79/generic, lantiq/xrx200, brcm27xx Runtime-tested on: ath79/generic, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: 5.4 fix DVFS caused random boot crashesRobert Marko2021-05-231-0/+107
| | | | | | | | | | | | | | | | | | 5.10.37 and 5.4.119 introduced a lot of DVFS changes for Armada 37xx from 5.13 kernel. Unfortunately commit: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/cpufreq/armada-37xx-cpufreq.c?h=v5.10.37&id=a13b110e7c9e0dc2edcc7a19d4255fc88abd83cc This patch actually corrects the things so that 1 or 1.2GHz models would actually get scaled to their native frequency. However, due to a AVS setting voltages too low this will cause random crashes on 1.2GHz models. So, until a new safe for everybody voltage is agreed on lets revert the patch. Fixes: 9d21ecc ("kernel: bump 5.4 to 5.4.119") Signed-off-by: Robert Marko <robert.marko@sartura.hr> (cherry picked from commit 080a0b74e39d159eecf69c468debec42f28bf4d8)
* kernel: bump 5.4 to 5.4.119Hauke Mehrtens2021-05-153-3/+3
| | | | | | | | | | | | | | | | | Removed because in upstream generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch ath79/patches-5.4/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch ramips/patches-5.4/999-fix-pci-init-mt7620.patch Manually rebased ath79/patches-5.4/0033-spi-ath79-drop-pdata-support.patch All others updated automatically. Compile-tested on: x86/64, ath79/generic Runtime-tested on: x86/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: fix parsing fixed subpartitionsRafał Miłecki2021-05-081-2/+2
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ed4641e9f1ad940cb60187dea09cf17c865efcaf)
* kernel: bump 5.4 to 5.4.114Hauke Mehrtens2021-05-021-64/+0
| | | | | | | | | | | | | | | | | | | | | | | Removed because in upstream* mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch Manually rebased* generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch Added new backport* generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch All others updated automatically. The new backport was included based on this[1] upstream commit that will be mainlined soon. This change is needed because Eric Dumazet's check for NET_IP_ALIGN (landed in 5.4.114) causes huge slowdowns on drivers which use napi_gro_frags(). Compile-tested on: x86/64, armvirt/64, ath79/generic Runtime-tested on: x86/64, armvirt/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: armada 370: dts: fix the crypto engineDaniel González Cabanelas2021-04-181-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The crypto engine in Armada 370 SoCs is currently broken. It can be checked installing the required packages for testing openssl with hw acceleration: opkg install openssl-util opkg install kmod-cryptodev opkg install libopenssl-devcrypto After configuring /etc/ssl/openssl.cnf to let openssl use the crypto engine for digest operations, and performing some checksums.. md5sum 10M-file.bin openssl md5 10M-file.bin ...we can see they don't match. There might be an alignment or size constraint issue caused by the idle-sram area. Use the whole crypto sram and disable the idle-sram area to fix it. Also disable the idle support by adding the broken-idle property to prevent accessing the disabled idle-sram. We don't care about disabling the idle support since it is already broken in Armada 370 causing a huge performance loss because it disables permanently the L2 cache. This was reported in the Openwrt forum and elsewhere by Debian users with different board models. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit 2e1ebe96c61424d0829bb1c8b5ec44aaa8bea8af)
* kernel: backport 5.13 mtd partitioning changesRafał Miłecki2021-04-081-4/+4
| | | | | | | | | 1. Use upstream accepted NVMEM patches 2. Minor fix for BCM4908 partitioning 3. Support for Linksys firmware partitions on Northstar Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3fd0a4222b6efbfbdb560c5b13e899ecda627494)
* mvebu: mamba resize kernel to 4MBTad Davanzo2021-03-291-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | mamba has a 3MB kernel partition as specified by the DTS. 3MB is not sufficient for building with many kernel modules or newer kernel versions. mamba uboot however as set from factory will load up to 4MB. This can be observed by looking a uboot log: NAND read: device 0 offset 0xa00000, size 0x400000 4194304 bytes read: OK and from uboot environment variables: $ fw_printenv | grep "pri_kern_size"; pri_kern_size=0x400000 Resize the root partitions from 37MB to 36MB to let kernel expand into it another 1MB. And set kernel target size to 4MB. Lastly add a compatibility version message: kernel-size-migration. And set it on mamba to prevent sysupgrading without first reinstalling from a factory image. Signed-off-by: Tad Davanzo <tad@spotco.us> (cherry picked from commit 10415d5e7016b69dc71c5f1b03e8e17b586f8edd)
* kernel: add pending mtd patches adding NVMEM supportRafał Miłecki2021-03-171-2/+2
| | | | | | | | | It's meant to provide upstream support for mtd & NVMEM. It's required e.g. for reading MAC address from mtd partition content. It seems to be in a final shape so it's worth testing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e90e75b12c818c49704755b9e530491aee2d554c)
* kernel: add the latest mtd patch extending ofpart parserRafał Miłecki2021-03-171-6/+6
| | | | | | | | | | | | | This adds the latest version of ofpart commit. It hopefully 1. Doesn't break compilation 2. Doesn't break partitioning (this time). It's required to implement fixed partitioning with some quirks. It's required by bcm53xx, bcm4908, kirkwood, lantiq and mvebu. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7a7b2fd809809fbd7045bd3dad4fc896a6fef06f)
* kernel: bump 5.4 to 5.4.102Hauke Mehrtens2021-03-068-16/+16
| | | | | | | | | Refreshed all patches. Compile-tested on: ath79, lantiq, ipq40xx, x86_64 Runtime-tested on: ipq40xx, x86_64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu/omnia: fix the device treeRui Salvaterra2021-03-013-0/+165
| | | | | | | | | | | | Backport [1] and fix [2] hardware buffer management. Also fix the IRQ storm caused by a misconfiguration of the PCA9538 interrupt pin [3]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm/boot/dts/armada-385-turris-omnia.dts?id=018b88eee1a2efda26ed2f09aab33ccdc40ef18f [2] https://lore.kernel.org/linux-arm-kernel/20210217153038.1068170-1-rsalvaterra@gmail.com/ [3] https://lore.kernel.org/linux-arm-kernel/20210220231144.32325-1-kabel@kernel.org/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> (cherry picked from commit 6fe6b631ef91a8a44d7324329ad6aaec6f08ada6)
* mvebu: espressobin: drop COMPHY removement patchTomasz Maciej Nowak2021-02-142-53/+0
| | | | | | | | | | There are proper workarounds merged to 5.4 stable tree for ESPRESSObin boards with older bootloader: 4e1a23779bde ("ata: ahci: mvebu: Make SATA PHY optional for Armada 3720") 40af962eb1d4 ("usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* kernel: bump 5.4 to 5.4.94John Audia2021-02-011-1/+1
| | | | | | | | | | | | All modification made by update_kernel.sh in a fresh clone without existing toolchains. Build-tested: bcm27xx/bcm2711, ipq806x/R7800, Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.86Adrian Schmutzler2021-01-011-3/+1
| | | | | | | | | | | | | | | | | Removed upstreamed patches: pending-5.4/499-mtd-parser-cmdline-Fix-parsing-of-part-names-with-co.patch Manually merged: pending-5.4/611-netfilter_match_bypass_default_table.patch layerscape/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/{generic,tiny}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64 Run-tested: ipq806x/R7800, realtek Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org>
* mvebu: gpio-mvebu IRQ index error kernel backportDaniel González Cabanelas2020-12-221-0/+33
| | | | | | | | | Backport the upstream kernel fix 525b0858ff to get rid of the kernel messages: mvebu-gpio xxxxxx.gpio: IRQ index 3 not found Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* mvebu: macchiatobin-singleshot: enable heartbeat LEDTomasz Maciej Nowak2020-12-201-0/+65
| | | | | | | | | | | | | | | With board revision 1.3, SolidRun moved the power LED to the middle of the board. In old place of power LED a GPIO controllable heartbeat LED was added. This commit touches only Single Shot variant, because all have revision 1.3. Some boards could be placed in an enclosure, therefore the LED18 is enabled by default, since that'll be the only visible indicator that the board is operating. Ref: http://wiki.macchiatobin.net/tiki-index.php?page=Schematics#Revision1.3_Electrical_Design_Changes Ref: http://macchiatobin.net/wp-content/uploads/2017/11/MACCHIATOBin-rev-1_3.pdf Reported-by: Alexandra Alth <alexandra@alth.de> Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mvebu: sort patchesTomasz Maciej Nowak2020-11-2550-43/+87
| | | | | | | | | | Sort patches according to target/linux/generic/PATCHES. Additionally: - replace hashes in backported patches with the ones from main Linux tree - add descriptions to some patches Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> [remove 004-add_sata_disk_activity_trigger.patch separately] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: remove redundant patch for Linksys LED triggerAdrian Schmutzler2020-11-251-39/+0
| | | | | | | | Remove 004-add_sata_disk_activity_trigger.patch, as the trigger is already added in shared dtsi. Suggested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.77John Audia2020-11-181-46/+0
| | | | | | | | | | | | | | | | | | | | | | | | Manually rebased patches: bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch generic-backport/744-v5.5-net-sfp-soft-status-and-control-support.patch layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch mvebu/patches-5.4/521-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch Removed: layerscape/patches-5.4/819-uart-0012-tty-serial-lpuart-add-LS1028A-support.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, lantiq/Easybox 904 xDSL, x86_64 Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL, x86_64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.75John Audia2020-11-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased patches: bcm27xx: patches-5.4/950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch bcm53xx: patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch layerscape: patches-5.4/802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch patches-5.4/808-i2c-0002-MLK-10893-i2c-imx-add-irqf_no_suspend.patch patches-5.4/820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch Removed since could be reverse-applied by quilt: mediatek: patches-5.4/0700-arm-dts-mt7623-add-missing-pause-for-switchport.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86_64 Run-tested: ipq806x/R7800, x86_64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64] Rebase of 802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* kernel: bump 5.4 to 5.4.74John Audia2020-11-021-106/+0
| | | | | | | | | | | | | | | | | | | Removed upstreamed patches: mvebu/patches-5.4 409-phy-marvell-comphy-Convert-internal-SMCC-firmware-re.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86_64 Run-tested: ipq806x/R7800, x86_64, lantiq/Easybox 904 xDSL No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64 build/run] [added lantiq test report] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.73John Audia2020-11-015-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed patches: generic/pending-5.4 445-mtd-spinand-gigadevice-Only-one-dummy-byte-in-QUA.patch 446-mtd-spinand-gigadevice-Add-QE-Bit.patch pistachio/patches-5.4 150-pwm-img-Fix-null-pointer-access-in-probe.patch Manually rebased: layerscape/patches-5.4 801-audio-0011-Revert-ASoC-fsl_sai-add-of_match-data.patch 801-audio-0039-MLK-16224-6-ASoC-fsl_sai-fix-DSD-suspend-resume.patch 801-audio-0073-MLK-21957-3-ASoC-fsl_sai-add-bitcount-and-timestamp-.patch 820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, mvebu (mamba, rango), x86_64, ramips/mt7621 Run-tested: ipq806x/R7800, mvebu (mamba, rango), x86_64, ramips (RT-AC57U) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [alter 820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: armada-37xx: espressobin: Backport patch for ethernet switch aliasesPali Rohár2020-10-115-5/+139
| | | | Signed-off-by: Pali Rohár <pali@kernel.org>
* mvebu: armada-37xx: Backport PCI aardvark patchesPali Rohár2020-10-1112-0/+1041
| | | | | | | | This commit contains patches for PCI aardvark driver and relevant DTS changes for Turris MOX and EspressoBin backported from mainline kernel. It fixes support for old ATF, various wifi cards, mainly Compex WLE900VX. Signed-off-by: Pali Rohár <pali@kernel.org>
* kernel: bump 5.4 to 5.4.69John Audia2020-10-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | Seemingly unneeded based on new upstream code so manually deleted: layerscape: 820-usb-0007-usb-dwc3-gadget-increase-timeout-value-for-send-ep-c.patch Manually merged: generic-hack: 251-sound_kconfig.patch All other modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [add lantiq test report, minor commit message clarification] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.63John Audia2020-09-061-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Manually merged: hack-5.4 230-openwrt_lzma_options.patch bcm27xx 950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch x86 011-tune_lzma_options.patch Remove upstreamed patches in collaboration with Ansuel Smith: ipq806x 093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch 093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch 093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch All other modifications made by update_kernel.sh Build-tested: bcm27xx/bcm2708, ipq806x, x86/64 Run-tested: ipq806x (R7800), x86/64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [update commit message/tested] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: backport linkstation-poweroff upstream driverDaniel González Cabanelas2020-08-281-0/+177
| | | | | | | | | | Backport the Linkstation poweroff driver from the kernel upstream (commit a7f79f99541ef) This driver is required by the Buffalo LinkStation LS421DE for a correct power off operation. It also allows to use the WoL feature. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* kernel: bump 5.4 to 5.4.60Adrian Schmutzler2020-08-242-3/+3
| | | | | | | | | | | | | | | | | | | | Deleted upstream patches: generic: 041-genirq-affinity-Make-affinity-setting-if-activated-o.patch ipq806x: 093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch 093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch Merged manually: ipq806x: 093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch layerscape: 804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch Build-tested: ath79/generic, ipq806x, layerscape/armv7, layerscape/armv8_64b Run-tested: ipq806x (R7800) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.58John Audia2020-08-184-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR is a blend of several kernel bumps authored by ldir taken from his staging tree w/ some further adjustments made by me and update_kernel.sh Summary: Deleted upstreamed patches: generic: 742-v5.5-net-sfp-add-support-for-module-quirks.patch 743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch bcm63xx: 022-v5.8-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch 024-v5.8-mtd-rawnand-brcmnand-fix-CS0-layout.patch mediatek: 0402-net-ethernet-mtk_eth_soc-Always-call-mtk_gmac0_rgmii.patch Deleted patches applied differently upstream: generic: 641-sch_cake-fix-IP-protocol-handling-in-the-presence-of.patch Manually merged patches: generic: 395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch bcm27xx: 950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch layerscape: 701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch Build system: x86_64 Build-tested: ath79/generic, bcm27xx/bcm2708, bcm27xx/bcm2711, imx6, mvebu/cortexa9, sunxi/a53 Run-tested: Netgear R7800 (ipq806x) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-By: Lucian Cristian <Lucian.cristian@gmail.com> [mvebu] Tested-By: Curtis Deptuck <curtdept@me.com> [x86/64] [do not remove 395-v5.8-net-sch_cake-Take-advantage-... patch, adjust and refresh patches, adjust commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-By: John Audia <graysky@archlinux.us> [ipq806x]
* kernel: bump 5.4 to 5.4.52John Audia2020-07-1712-67/+67
| | | | | | | | | update_kernel.sh refreshed all patches, no human interaction was needed Build system: x86_64 Run-tested: Netgear R7800 (ipq806x) Signed-off-by: John Audia <graysky@archlinux.us>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-11 17:38:12 +0000