aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mediatek
Commit message (Collapse)AuthorAgeFilesLines
* mediatek: mt7622: switch to generic eMMC sysupgradeDaniel Golle2021-12-022-18/+5
| | | | | | | Use functions in newly introduced emmc.sh for sysupgrade of the BananaPi BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek/mt7622: unifi-6-lr: fix ucidef network configuration typoMark Mentovai2021-11-191-1/+1
| | | | | | | | There's no such thing as ucidef_set_interfaces_lan. It's ucidef_set_interface_lan. Cc: David Bauer <mail@david-bauer.net> Signed-off-by: Mark Mentovai <mark@moxienet.com>
* kernel: bump 5.10 to 5.10.80Rui Salvaterra2021-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch [1] bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch [2] lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch [3] lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch [4] lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch [5] lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch [6] Manually rebased: ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=47462c5e600fbaffd755cd13dedd80d04e41ff83 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=2fde76df1885a6bec04317e457121326070450eb [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=9b366f5221d8aa64b22f35be137a5749326444ce [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=5af57ce8a6155fe3e4270d28d171abf8903bebc0 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=b92a5df2c7adc79a57481445f67de0c1c716581f [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=6b72caabc47011d03f44064452b2c65e8ed18326 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: mt7622: bpi-r64: rewrite MMC uImage.FIT sysupgradeDaniel Golle2021-11-122-17/+14
| | | | | | | | | | Similar to mt7623, also no longer use 'blockdev' and stop relying on in-kernel partition parsers. Instead, strip off all metadata using 'fwtool' while writing the firmware image and scrape the number of blocks written from 'dd', then use that block offset to stash the configuration backup. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: re-write sysupgrade uImage.FIT on MMCDaniel Golle2021-11-122-16/+13
| | | | | | | | | | | | | | Re-reading the partition table doesn't work reliably, it fails if anything on the device is still in use and it's not trivial to prevent every possible case of a block device still being in use somehow. Therefore, instead of relying on the in-kernel partition parser to know where to write the configuration backup, use OpenWrt's format-agnostic fwtool to strip off all metadata from the image and count its blocks while writing. In that way we can know where to write the config backup without needing the kernel to parse the MBR and FIT structures. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: Set some options in generic configurationHauke Mehrtens2021-11-021-1/+0
| | | | | | | Add CONFIG_USB_ETH and CONFIG_PWM_JZ4740 to generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: mt7623: make use of find_mmc_partDaniel Golle2021-11-011-5/+5
| | | | | | | Use find_mmc_part instead of previously introduced get_partition_by_name which requires a custom kernel patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: make use of find_mmc_partDaniel Golle2021-11-011-6/+6
| | | | | | | Use find_mmc_part instead of previously introduced get_partition_by_name which requires a custom kernel patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.76Rui Salvaterra2021-10-301-1/+1
| | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0145-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch [1] Manually rebased: bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch Note: although automatically rebaseable, the last patch has been edited to avoid conflicting bit definitions. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=b6f32897af190d4716412e156ee0abcc16e4f1e5 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: make sure MMC is not busy before commencing sysupgradeDaniel Golle2021-10-282-0/+2
| | | | | | | | | In case of the block device still being in use, re-reading the partition table fails. In that case, abort sysupgrade to avoid corrupting the just-written image because of wrong offsets caused by failure to re-read the partition table. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.74Rui Salvaterra2021-10-211-1/+1
| | | | | | Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: add EEPROM data for BPi-R64 2.4GHz wmacDaniel Golle2021-10-151-0/+31
| | | | | | | | | | | EEPROM data extracted from vendor image found at http://forum.banana-pi.org/t/bpi-r64-mt7622-mac80211-wifi-driver/10246/77 http://forum.banana-pi.org/uploads/short-url/jworbyBYpvrw9VQ2sx92B9z6DWS.bin MAC address in the EEPROM has been zero'd which results in random address on boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: enable configfs for DT overlay on mt7622 and mt7623Daniel Golle2021-10-092-0/+5
| | | | | | | | | Enable kernel options to allow loading device tree overlay via configfs at runtime. This is useful for devboards like the BPi-R2 and BPi-R64 which got RasbPi-compatible 40-pin GPIO header which allow all sorts of extensions. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: Deactivate some ARM64 errata workaroundsHauke Mehrtens2021-10-031-5/+0
| | | | | | | | | | | This deactivates the following workarounds for erratas in ARM64 CPUS: CONFIG_ARM64_ERRATUM_1165522: Cortex-A76 cores (r0p0, r1p0, r2p0) CONFIG_ARM64_ERRATUM_1286807: Cortex-A76 cores (r0p0 to r3p0) CONFIG_ARM64_ERRATUM_1418040: Cortex-A76/Neoverse-N1 cores (r0p0 to r3p1) CONFIG_CAVIUM_TX2_ERRATUM_219: Cavium ThunderX2 CONFIG_FUJITSU_ERRATUM_010001: Fujitsu-A64FX Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: mt7623: bpi-r2: add LED aliasesDaniel Golle2021-10-011-0/+29
| | | | | | Add aliases for LEDs in device tree of the BPi-R2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: remove files and patches for Linux 5.4Daniel Golle2021-10-01183-111722/+0
| | | | | | | All subtargets only provide files and patches for Linux 5.10 by now so there is little use for the old Linux 5.4 stuff. Remove it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add FEATURES and order them alphabeticallyDaniel Golle2021-09-302-2/+2
| | | | | | | | Add common features 'gpio', 'nand', 'pci', 'pcie', 'squashfs' and 'usb' for all mediatek targets, add 'display' and 'usbgadget' for MT7623. Sort features alphabetically while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: provide power on mPCIe in SATA modeDaniel Golle2021-09-301-17/+2
| | | | | | | | | User reported that R64 doesn't provide power to the mPCIe slot in case the PCIe port is disabled as it is when selecting the SATA configuration. As users may still want to use USB-connected mPCIe modules in CN8 slot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.67Rui Salvaterra2021-09-301-2/+2
| | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0312-vc4_hdmi-Set-HD_CTL_WHOLSMP-and-HD_CTL_CHALIGN_SET.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.144John Audia2021-09-134-31/+31
| | | | | | | | | | | | | Manually rebased: backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: Set CONFIG_RCU_CPU_STALL_TIMEOUT=21Hauke Mehrtens2021-09-091-1/+0
| | | | | | | | | | | | The default value for CONFIG_RCU_CPU_STALL_TIMEOUT was changed from 60 seconds to 21 seconds in 2012 in the upstream kernel. Some targets already use 21 seconds. This patch changes the default value in the generic configuration to 21 seconds and removes the target specific configuration options. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: add support for TOTOLINK A8000RUChuanhong Guo2021-09-033-0/+345
| | | | | | | | | | | | | | | | | | Specifications: - SoC: MT7622 - RAM: 512MB - Flash: MX35LF1GE4AB 128MB SPI NAND - Ethernet: RTL8367S 5x1GbE - WiFi: 2.4G: MT7622 5G: MT7615N x2 - Other ports: USB3.0 x1 Flash instruction: *important*: upgrade vendor firmware to at least V7.1cu.643_B20200521 1. hold the reset button and power on the device. wait for about 10s before releasing the reset button. 2. upload sysupgrade.bin via u-boot recovery page on http://192.168.1.1 Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: move two symbols to the generic kconfigsRui Salvaterra2021-08-293-6/+0
| | | | | | | CONFIG_RCU_{NEED_SEGCBLIST,STALL_COMMON} are set basically everywhere. Move them to the generic kconfigs. And resort the generic kconfigs while at it. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: disable CONFIG_RCU_EXPERT and friendsRui Salvaterra2021-08-291-1/+0
| | | | | | | | | | | | | | Based on the existing documentation [1][2], I dare anyone to demonstrate that we need to fine-tune these RCU parameters. The (performance) breakage potential for doing so is immense, so let's just please put down this loaded footgun. Disable CONFIG_RCU_EXPERT and its dependent symbols. Additionally, remove the CONFIG_RCU_EXPERT symbol from the target kconfigs which contain it. [1] https://www.kernel.org/doc/Documentation/RCU/Design/Data-Structures/Data-Structures.html [2] https://lwn.net/Articles/777214/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.61John Audia2021-08-2910-43/+17
| | | | | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-1031-net-lan78xx-Ack-pending-PHY-ints-when-resetting.patch Removed upstreamed: mvebu/patches-5.10/101-cpufreq-armada-37xx-forbid-cpufreq-for-1.2-GHz-variant.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* mediatek: mt7623: replace kconfig symbol for snand driverChuanhong Guo2021-08-271-1/+1
| | | | | | | this change was missing during the spi-nand driver replacement, causing build failure. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mt7629: manually add missing kconfigChuanhong Guo2021-08-271-0/+3
| | | | | | | | | These options doesn't show up unless some kernel packages are selected, so they are not covered by kernel_menuconfig. Manually add them so that a build with all kmods can pass without user interaction. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mt7629: build with linux 5.10Chuanhong Guo2021-08-274-96/+16
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: bmt: set default bmt oob offset to 0Chuanhong Guo2021-08-271-1/+1
| | | | | | | | there's no driver level remapping of oob data in the new spi-nand driver and bmt oob signature starts at 0x0 of the dumped oob data. change the default value to 0 for the new spi-nand driver. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mtk-snand: check request size against chip infoChuanhong Guo2021-08-271-9/+13
| | | | | | | | | mtd->size will be overrided by BMT which makes all mtd requests made by bmt fail in request size checking. this commit changes the driver to check against actual chip size in chip info as a workaround. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: attach bmt to the new snand driverChuanhong Guo2021-08-271-27/+36
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: change dts to use the new snand driverChuanhong Guo2021-08-277-250/+165
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: remove spi-nand hacks from 5.10Chuanhong Guo2021-08-274-1538/+0
| | | | | | | we now have a standalone mtd driver and the old spi-mem driver along with the hack in spi-nand core can be removed. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: enable new spi-nand driver for kernel 5.10Weijie Gao2021-08-271-0/+1
| | | | | | | This patch enables new spi-nand driver for mt7622 and mt7629. Signed-off-by: Weijie Gao <hackpascal@gmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: add a new spi-nand driver for kernel 5.10Weijie Gao2021-08-2711-0/+3992
| | | | | | | | | | | | | This patch adds a new spi-nand driver which implements the SNFI of mt7622 and mt7629. Unlike the existing snfi driver which makes use of the spi-mem framework and the spi-nand framework with modified ecc support, this driver is implemented directly on the mtd framework with other components untouched, and provides better performance, and behaves exactly the same as the nand framework. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* mediatek: mt7623: enable clock drivers for Mali-450 and audioDaniel Golle2021-08-221-2/+2
| | | | | | | Built clock drivers for G3DSYS and AUDSYS into the kernel to allow multimedia features (GPU and audio) to work if they exist. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: backport musb, improve HDMI consoleDaniel Golle2021-08-216-5/+369
| | | | | | | | | Backport support for dual-role USB 2.0 as that's what is actually built-into MT7623. Improve HDMI console by enabling VT and setting up tty1..tty6. Re-add accidentally removed CONFIG_ARM_ARCH_TIMER. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.4 to 5.4.142John Audia2021-08-214-43/+43
| | | | | | | | | | | | | | | Removed upstreamed: hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* mediatek: mt7623: enable more hardware featuresDaniel Golle2021-08-214-15/+118
| | | | | | | In order to make HDMI console available on the BananaPi BPi-R2 select various Kconfig symbols which are useful for systems with graphics. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: convert mtd-mac-address to nvmem for MT7629 RFBAdrian Schmutzler2021-08-207-24/+70
| | | | | | | This conversion appears to have been overlooked since it's in a kernel patch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.140John Audia2021-08-141-1/+1
| | | | | | | | | | | | | | | | Removed upstreamed bcm27xx/patches-5.4: 950-0977-USB-gadget-f_hid-avoid-crashes-and-log-spam.patch 950-0980-SQUASH-USB-gadget-f_hid-remove-more-spam.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.139John Audia2021-08-141-1/+1
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.58Rui Salvaterra2021-08-141-1/+1
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: add missing config symbolsDavid Bauer2021-08-132-0/+18
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: add missing config symbolDavid Bauer2021-08-113-0/+3
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* treewide: add various missing config symbolsDavid Bauer2021-08-103-0/+3
| | | | | | Fixes commit 91a52f22a13d ("treewide: backport support for nvmem on non platform devices") Signed-off-by: David Bauer <mail@david-bauer.net>
* kirkwood: import patch to fix build and refresh patchesDaniel Golle2021-08-052-2/+2
| | | | | | | | | kirkwood build broke due to missing include needed for ETH_ALEN. Add patch (sent upstream as well) to address that. Refresh patches for 5.4 and 5.10. Fixes: 91a52f22a1 ("treewide: backport support for nvmem on non platform devices") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: enable HW RNGDavid Bauer2021-08-051-0/+2
| | | | | | | MT7622 provides are hardware RNG with upstream Linux driver. Enable compilation of this driver to make use of the hardware RNG. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 5.4 to 5.4.135John Audia2021-07-312-3/+3
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.54Rui Salvaterra2021-07-291-49/+0
| | | | | | | Deleted (upstreamed) patches: mediatek/patches-5.10/000-spi-fix-fifo.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 10:50:41 +0000